Add a variable which will store the contents of the 'flags' variable as
passed in by the individual block jobs. Since the flags may influence
behaviour of the jobs it's important to preserve them to the
finalization steps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now, that every use of virAtomic was replaced with its g_atomic
equivalent, let's remove the module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainChrDefDropDefaultPath() returns an int, but it's
always returning 0. Callers are checking for result < 0 to
run their cleanup code needlessly.
Turn the function to 'void' and adjust the callers.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Avoid some of the virObjectUnref() calls by using g_autoptr.
Aside from the 'cleanup' label in qemuDomainSetFakeReboot(),
all other now deprecated cleanup labels will be removed in
the next patch.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree to remove VIR_FREE() calls used for cleanups.
Labels that became deprecated will be removed in a later
patch.
In qemuDomainSetupDisk(), the 'dst' variable is not used at
all and could be removed.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'caps' variable in qemuDomainObjPrivateXMLParseAutomaticPlacement()
is set to auto clean via g_autoptr(), but a 'virObjectUnref(caps)' is
being executed in the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The QEMU driver uses the <teaming type='persistent|transient'
persistent='blah'/> element to setup a "failover" pair of devices -
the persistent device must be a virtio emulated NIC, with the only
extra configuration being the addition of ",failover=on" to the device
commandline, and the transient device must be a hostdev NIC
(<interface type='hostdev'> or <interface type='network'> with a
network that is a pool of SRIOV VFs) where the extra configuration is
the addition of ",failover_pair_id=$aliasOfVirtio" to the device
commandline. These new options are supported in QEMU 4.2.0 and later.
Extra qemu-specific validation is added to ensure that the device
type/model is appropriate and that the qemu binary supports these
commandline options.
The result of this will be:
1) The virtio device presented to the guest will have an extra bit set
in its PCI capabilities indicating that it can be used as a failover
backup device. The virtio guest driver will need to be equipped to do
something with this information - this is included in the Linux
virtio-net driver in kernel 4.18 and above (and also backported to
some older distro kernels). Unfortunately there is no way for libvirt
to learn whether or not the guest driver supports failover - if it
doesn't then the extra PCI capability will be ignored and the guest OS
will just see two independent devices. (NB: the current virtio guest
driver also requires that the MAC addresses of the two NICs match in
order to pair them into a bond).
2) When a migration is requested, QEMu will automatically unplug the
transient/hostdev NIC from the guest on the source host before
starting migration, and automatically re-plug a similar device after
restarting the guest CPUs on the destination host. While the transient
NIC is unplugged, all network traffic will go through the
persistent/virtio device, but when the hostdev NIC is plugged in, it
will get all the traffic. This means that in normal circumstances the
guest gets the performance advantage of vfio-assigned "real hardware"
networking, but it can still be migrated with the only downside being
a performance penalty (due to using an emulated NIC) during the
migration.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function has no users now and there's no need for it as the common
pattern is to look up the whole disk object anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Every supported qemu is able to return the list of machine types it
supports so we can start validating it against that list. The advantage
is a better error message, and the change will also prevent having stale
test data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'builtin' rng backend model can be used as following:
<rng model='virtio'>
<backend model='builtin'/>
</rng>
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are more places which require getting the topmost nodename to be
passed to qemu. Separate it out into a new function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The "ps2" bus is only available on certain machines like x86. On
machines like s390x, we should refuse to add a device to this bus
instead of silently ignoring it.
Looking at the QEMU sources, PS/2 is only available if the QEMU binary
has the "i8042" device, so let's check for that and only allow "ps2"
devices if this QEMU device is available, or if we're on x86 anyway
(so we don't have to fake the QEMU_CAPS_DEVICE_I8042 capability in
all the tests that use <input ... bus='ps2'/> in their xml data).
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1763191
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function virSecretGetSecretString calls into secret driver and is
used from other hypervisors drivers and as such makes more sense in
util.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This function potentially grabs both a monitor job and an agent job at
the same time. This is problematic because it means that a malicious (or
just buggy) guest agent can cause a denial of service on the host. The
presence of this function makes it easy to do the wrong thing and hold
both jobs at the same time. All existing uses have already been removed
by previous commits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically there are two places where we format authentication and
encryption for a disk. The logich which formats it for backing files was
flawed though and didn't format it at all. This worked if the image
became a backing file through the means of a snapshot but not directly.
Force formatting of the source and encryption for any non-disk case to
fix the issue.
This caused problems in many places as we use the formatter to copy the
definition. Effectively any copy lost the secret definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1789310https://bugzilla.redhat.com/show_bug.cgi?id=1788898
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Commit v5.10.0-290-g3a4787a301 refactored qemuDomainGetHostdevPath to
return a single path rather than an array of paths. When the function is
called on a missing device, it will now return NULL in @path rather than
a NULL array with zero items and the callers need to be adapted
properly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Wire up the allocation and disposal of private data.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These functions are meant to replace verbose check for the old
style of specifying UEFI with a simple function call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we delete the images elsewhere it's not required. Additionally
it's safe to do as we never released an upstream version which required
this being in place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
qemuDomainObjPrivateDataClear clears state which become invalid after VM
stopped running and the node name allocator belongs there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The GLib g_lstat() function provides a portable impl for
Win32.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch introduces a new PCI hostdev address type called
'unassigned'. This new type gives users the option to add
PCI hostdevs to the domain XML in an 'unassigned' state, meaning
that the device exists in the domain, is managed by Libvirt
like any regular PCI hostdev, but the guest does not have
access to it.
This adds extra options for managing PCI device binding
inside Libvirt, for example, making all the managed PCI hostdevs
declared in the domain XML to be detached from the host and bind
to the chosen driver and, at the same time, allowing just a
subset of these devices to be usable by the guest.
Next patch will use this new address type in the QEMU driver to
avoid adding unassigned devices to the QEMU launch command line.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the validation of vmcoreinfo from qemuBuildVMCoreInfoCommandLine()
to qemuDomainDefValidateFeatures(), allowing for validation
at domain define time.
qemuxml2xmltest.c was changed to account for this caps being
now validated at this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move smartcard validation being done by qemuBuildSmartcardCommandLine()
to the existing qemuDomainSmartcardDefValidate() function. This
function is called by qemuDomainDeviceDefValidate(), allowing smartcard
validation in domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move EGL Headless validation from qemuBuildGraphicsEGLHeadlessCommandLine()
to qemuDomainDeviceDefValidateGraphics(). This function is called by
qemuDomainDefValidate(), validating the graphics parameters in domain
define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the NVDIMM validation from qemuBuildMachineCommandLine()
to a new function in qemu_domain.c, qemuDomainDeviceDefValidateMemory(),
which is called by qemuDomainDeviceDefValidate(). This allows
NVDIMM validation to occur in domain define time.
It also increments memory hotplug validation, which can be seen
by the failures in the hotplug tests in qemuxml2xmltest.c that
needed to be adjusted after the move.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
With NVMe disks, one can start a blockjob with a NVMe disk
that is not visible in domain XML (at least right away). Usually,
it's fairly easy to override this limitation of
qemuDomainGetMemLockLimitBytes() - for instance for hostdevs we
temporarily add the device to domain def, let the function
calculate the limit and then remove the device. But it's not so
easy with virStorageSourcePtr - in some cases they don't
necessarily are attached to a disk. And even if they are it's
done later in the process and frankly, I find it too complicated
to be able to use the simple trick we use with hostdevs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are couple of places where a domain with a VFIO device gets
special treatment: in CGroups when enabling/disabling access to
/dev/vfio/vfio, and when creating/removing nodes in domain mount
namespace. Well, a NVMe disk is a VFIO device too. Fortunately,
we have this qemuDomainNeedsVFIO() function which is the only
place that needs adjustment.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If a domain has an NVMe disk configured, then we need to create
/dev/vfio/* paths in domain's namespace so that qemu can open
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
We have this beautiful function that does crystal ball
divination. The function is named
qemuDomainGetMemLockLimitBytes() and it calculates the upper
limit of how much locked memory is given guest going to need. The
function bases its guess on devices defined for a domain. For
instance, if there is a VFIO hostdev defined then it adds 1GiB to
the guessed maximum. Since NVMe disks are pretty much VFIO
hostdevs (but not quite), we have to do the same sorcery.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Sometimes, we have a PCI address and not fully allocated
virPCIDevice and yet we still want to know its /dev/vfio/N path.
Introduce virPCIDeviceAddressGetIOMMUGroupDev() function exactly
for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Previous patches rendered some of 'cleanup' labels needless.
Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now that all callers of qemuDomainGetHostdevPath() handle
/dev/vfio/vfio on their own, we can safely drop handling in this
function. In near future the decision whether domain needs VFIO
file is going to include more device types than just
virDomainHostdev.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are several variables which could be automatically freed
upon return from the function. I'm not changing @tmpPaths (which
is a string list) because it is going to be removed in next
commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In near future, the decision what to do with /dev/vfio/vfio with
respect to domain namespace and CGroup is going to be moved out
of qemuDomainGetHostdevPath() because there will be some other
types of devices than hostdevs that need access to VFIO.
All functions that I'm changing (except qemuSetupHostdevCgroup())
assume that hostdev we are adding/removing to VM is not in the
definition yet (because of how qemuDomainNeedsVFIO() is written).
Fortunately, this assumption is true.
For qemuSetupHostdevCgroup(), the worst thing that may happen is
that we allow /dev/vfio/vfio which was already allowed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
qemuBuildSoundCodecStr() validates if a given QEMU binary
supports the sound codec. This validation can be moved to
qemu_domain.c to be executed in domain define time.
The codec validation was moved to the existing
qemuDomainDeviceDefValidateSound() function.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of QEMU_CAPS_OBJECT_USB_AUDIO and
QEMU_CAPS_DEVICE_ICH9_INTEL_HDA to a new function in qemu_domain.c,
qemuDomainDeviceDefValidateSound(). This function is called by
qemuDomainDeviceDefValidate() to validate the sound device
in domain define time.
qemuxml2xmltest.c was adjusted to add the now required caps for
domain definition.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuBuildTPMDevStr() does TPM model validation that can be moved to
qemu_domain.c, allowing validation in domain define time. This patch
moves it to the existing qemuDomainDeviceDefValidateTPM() function.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Console validation is currently being done by qemuBuildConsoleCommandLine().
This patch moves it to a new qemuDomainDefValidateConsole() function. This
new function is then called by qemuDomainDefValidate(), validating the
console in domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the SPICE caps validation from qemuBuildGraphicsSPICECommandLine()
to a new function called qemuDomainDeviceDefValidateSPICEGraphics().
This function is called by qemuDomainDeviceDefValidateGraphics(),
which in turn is called by qemuDomainDefValidate(), validating the graphics
parameters in domain define time.
This validation move exposed a flaw in the 'default-video-type' tests
for PPC64, AARCH64 and s390 archs. The XML was considering 'spice' as
the default video type, which isn't true for those architectures.
This was flying under the radar until now because the SPICE validation
was being made in 'virsh start' time, while the XML validation done in
qemuxml2xmltest.c considers define time.
All other tests were adapted to consider SPICE validation in this
earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the VNC cap validation from qemuBuildGraphicsVNCCommandLine()
to qemuDomainDeviceDefValidateGraphics(). This function is called by
qemuDomainDefValidate(), validating the graphics parameters in domain
define time.
Tests were adapted to consider SDL validation in this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are validations for SDL, VNC, SPICE and EGL_HEADLESS
around several BuildGraphics*CommandLine in qemu_command.c. This
patch starts to move all of them to qemu_domain.c, inside the
existent qemuDomainDeviceDefValidateGraphics() function. This
function is called by qemuDomainDefValidate(), validating the
graphics parameters in domain define time.
In this patch we'll move the SDL validation code from
qemuBuildGraphicsSDLCommandLine(). Tests were adapted to consider
SDL validation in this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the pcihole64 validation being done by
qemuBuildGlobalControllerCommandLine() to the existing function
qemuDomainDeviceDefValidateControllerPCI(), which provides
domain define time validation.
The existing pcihole64 validations in qemu_domain.c were replaced
by the ones moved from qemu_command.c. The reason is that they
are more specific, allowing VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT
and VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT to have distinct validation,
with exclusive QEMU caps and machine types.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the boot validation being done by qemuBuildBootCommandLine()
to to a new qemuDomainDefValidateBoot() function. This new function
is called by qemuDomainDefValidate(), allowing boot validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the PM validation being done by qemuBuildPMCommandLine() to
to a new qemuDomainDefValidatePM() function. This new function
is called by qemuDomainDefValidate(), promoting PM validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
@def->clock validation is done by qemuBuildClockCommandLine() and
qemuBuildClockArgStr(). This patch centralize the validation done
in both these functions to a new qemuDomainDefValidateClockTimers()
function. This new function is then called by qemuDomainDefValidate(),
promoting clock validation in domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU_CAPS_DEVICE_VMGENID is now being validated by
qemuDomainDefValidate().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of qemuBuildHostdevCommandLine() to
qemuDomainDeviceDefValidateHostdev() and qemuDomainMdevDefValidate(),
allowing them to be validated at domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of QEMU_CAPS_CHARDEV_FILE_APPEND and
QEMU_CAPS_CHARDEV_LOGFILE to qemuDomainChrSourceDefValidate().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of QEMU_CAPS_USB_HUB to a new function in
qemu_domain.c, qemuDomainDeviceDefValidateHub(). This function is
called by qemuDomainDeviceDefValidate() to validate the sound device
in domain define time.
qemuxml2xmltest.c was adjusted to add the now required caps for
domain definition.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A new function qemuDomainDeviceDefValidateNVRAM() was created
to validate the NVRAM in domain define time. Unit test was
adjusted to account for the extra QEMU_CAPS_DEVICE_NVRAM required
during domain define.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A new qemuDomainDefValidateNuma() function was created to host
all the QEMU caps validation being done inside qemuBuildNumaArgStr().
This new function is called by qemuDomainValidateCpuCount()
to allow NUMA validation in domain define time.
Tests were changed to account for the QEMU capabilities
that need to be present at domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Validation of MACHINE_KERNEL_IRQCHIP and MACHINE_KERNEL_IRQCHIP_SPLIT
QEMU caps are now being done in qemuDomainDefValidateFeatures().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virQEMUCapsSupportsVmport() is now being called inside
qemuDomainDefValidateFeatures() for VIR_DOMAIN_FEATURE_VMPORT
feature.
qemuxml2xmltest.c was changed to account for this caps being
now validated at domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce a new function called qemuDomainDefValidatePSeriesFeature()
that will center all the PSeries validation done in qemu_command.c.
qemuDomainDefValidatePSeriesFeature() is then called during domain
define time, in qemuDomainDefValidateFeatures().
qemuxml2argvtest.c is also changed to include all the caps that now
are being validated in define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The use of the parseOpaque parameter was mistakenly removed in
commit 4a4132b462
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Dec 3 10:49:49 2019 +0000
conf: don't use passed in caps in post parse method
causing the method to re-fetch qemuCaps that were already just
fetched and put into parseOpaque.
This is inefficient when parsing incoming XML, but for live
XML this is more serious as it means we use the capabilities
for the current QEMU binary on disk, rather than the running
QEMU.
That commit, however, did have a useful side effect of fixing
a crasher bug in the qemu post parse callback introduced by
commit 5e939cea89
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Thu Sep 26 18:42:02 2019 +0200
qemu: Store default CPU in domain XML
The qemuDomainDefSetDefaultCPU() method in that patch did not
allow for the possibility that qemuCaps would be NULL and thus
resulted in a SEGV.
This shows a risk in letting each check in the post parse
callback look for qemuCaps == NULL. The safer option is to
check once upfront and immediately stop (postpone) further
validation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Don't check os type / virt type / arch in the post-parse callback
because we can't assume qemuCaps is non-NULL at this point. It
also conceptually belongs to the validation callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This commit aims to fix
https://bugzilla.redhat.com/show_bug.cgi?id=1610207
The cause was apparently incorrect handling of jobs in snapshot
revert code which allowed a thread executing snapshot delete to
begin job while snapshot revert was still running on another
thread. The snapshot delete thread then waited on a condition
variable in qemuMonitorSend() while the revert thread finished,
changing (and effectively corrupting) the qemuMonitor structure
under the delete thread which led to its crash.
The incorrect handling of jobs in revert code was due to the fact
that although qemuDomainRevertToSnapshot() correctly begins a job
at the start, the job was implicitly ended when qemuProcessStop()
was called because the job lives in the QEMU driver's private
data (qemuDomainObjPrivate) that was purged during
qemuProcessStop().
This fix prevents qemuProcessStop() from clearing jobs as the
idea of qemuProcessStop() clearing jobs seems wrong in the first
place. It was (inadvertently) introduced in commit
888aa4b6b9, which is effectively reverted by
the second hunk of this commit. To preserve the desired effects
of the faulty commit, the first hunk is included as suggested by
Michal.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When QEMU uid/gid is set to non-root this is pointless as if we just
used a regular setuid/setgid call, the process will have all its
capabilities cleared anyway by the kernel.
When QEMU uid/gid is set to root, this is almost (always?) never
what people actually want. People make QEMU run as root in order
to access some privileged resource that libvirt doesn't support
yet and this often requires capabilities. As a result they have
to go find the qemu.conf param to turn this off. This is not
viable for libguestfs - they want to control everything via the
XML security label to request running as root regardless of the
qemu.conf settings for user/group.
Clearing capabilities was implemented originally because there
was a proposal in Fedora to change permissions such that root,
with no capabilities would not be able to compromise the system.
ie a locked down root account. This never went anywhere though,
and as a result clearing capabilities when running as root does
not really get us any security benefit AFAICT. The root user
can easily do something like create a cronjob, which will then
faithfully be run with full capabilities, trivially bypassing
the restriction we place.
IOW, our clearing of capabilities is both useless from a security
POV, and breaks valid use cases when people need to run as root.
This removes the clear_emulator_capabilities configuration
option from qemu.conf, and always runs QEMU with capabilities
when root. The behaviour when non-root is unchanged.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since blockcommit is asynchronous, libvirtd can be restarted while the
operation runs. To ensure the information necessary to finish up the job
is not lost, serialisation to and deserialisation from the status XML is
added.
To unittest this, the new element was only added to the active commit test,
the non-active commit test doesn't have the new element so as to test its
absence.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
A backup blockjob needs to be able to notify the parent backup job as
well as track all data to be able to clean up the bitmap and blockdev
used for the backup.
Add the data structure, job allocation function and status XML formatter
and parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Store the data of a backup job along with the index counter for new
backup jobs in the status XML. Currently we will support only one
backup job and thus there's no necessity to add arrays of jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A backup job may consist of many backup sub-blockjobs. Add the new
blockjob type and add all type converter strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will want to use the async job infrastructure along with all the APIs
and event for the backup job so add the backup job as a new async job
type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce QEMU_DOMAIN_JOB_STATS_TYPE_BACKUP and the convertors and other
plumbing to be able to report statistics for the backup job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
$ cat f | grep -e arch -e emulator
<type arch='mipsel'>hvm</type>
$ sudo virsh define f
error: Failed to define domain from f
error: An error occurred, but the cause is unknown
After:
$ sudo virsh define f
error: Failed to define domain from f
error: unsupported configuration: No emulator found for arch 'mipsel'
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Annoyingly there was no existing constructor, and identifying all the
places which do a VIR_ALLOC(cpu) is a bit error prone. Hopefully this
has found & converted them all.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid grabbing the whole virCapsPtr object when we only need the
NUMA information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NUMA cells are stored directly in the virCapsHostPtr
struct. This moves them into their own struct allowing
them to be stored independantly of the rest of the host
capabilities. The change is used as an excuse to switch
the representation to use a GPtrArray too.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the domain XML APIs don't use virCapsPtr we can stop passing it
around many QEMU driver methods.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This parameter is now unused and can be removed entirely.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
No impl of this callback requires the virCapsPtr anymore.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only user of this callback did not require the virCapsPtr parameter.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU impl of the callback can directly use the QEMU capabilities
cache to resolve the emulator binary name, allowing virCapsPtr to be
dropped.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virCapsPtr param is not used by any of the virt drivers providing
this callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To enable the virCapsPtr parameter to the post parse method to be
eliminated, the drivers must fetch the virCapsPtr from their own
driver via the opaque parameter, or use an alternative approach
to validate the parsed data.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The XML parser currently calls virCapabilitiesDomainDataLookup during
parsing to find the domain capabilities matching the triple
(virt type, os type, arch)
This is, however, bogus with the QEMU driver as it assumes that there
is an emulator known to the default driver capabilities that matches
this triple. It is entirely possible for the driver to be parsing an
XML file with a custom emulator path specified pointing to a binary
that doesn't exist in the default driver capabilities. This will,
for example be the case on a RHEL host which only installs the host
native emulator to /usr/bin. The user can have built a custom QEMU
for non-native arches into $HOME and wish to use that.
Aside from validation, this call is also used to fill in a machine type
for the guest if not otherwise specified. Again, this data may be
incorrect for the QEMU driver because it is not taking account of
the emulator binary that is referenced.
To start fixing this, move the validation to the post-parse callbacks
where more intelligent driver specific logic can be applied.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Moving their instance parameter to be the first one, and give consistent
ordering of other parameters across all functions. Ensure that the xml
options are passed into both functions in prep for future work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our normal practice is for the object type to be the name prefix, and
the object instance be the first parameter passed in.
Rename these to virDomainObjSave and virDomainDefSave moving their
primary parameter to be the first one. Ensure that the xml options
are passed into both functions in prep for future work.
Finally enforce checking of the return type and mark all parameters
as non-NULL.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate the need to use virCapsPtr for anything
other than the virConnectGetCapabilies() API impl, cache the host arch
against the QEMU driver struct and use that field directly.
In the tests we move virArchFromHost() globally in testutils.c so that
every test runs with a fixed default architecture reported.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a follow-up to patch series posted in
https://www.redhat.com/archives/libvir-list/2019-November/msg01180.html
It implements a suggestion made by Cole in
https://www.redhat.com/archives/libvir-list/2019-November/msg01207.html
and discussed in follow-up messages as there were no objections to the
change.
The aim is to make the code more readable by replacing nested branching
with a flat structure.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function is now used only in qemu_process.c so move it there and
name it 'qemuProcessPrepareQEMUCaps' which is more appropriate to what
it's doing.
The reworded comment now mentions that it will also post-process the
caps for VM startup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To better track jobs we couldn't parse let's introduce a new job type
which will clarify semantics internally in few places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
<interface> devices (virDomainNetDef) are a bit different from other
types of devices in that their actual type may come from a network (in
the form of a port connection), and that doesn't happen until the
domain is started. This means that any validation of an <interface> at
parse time needs to be a bit liberal in what it accepts - when
type='network', you could think that something is/isn't allowed, but
once the domain is started and a port is created by the configured
network, the opposite might be true.
To solve this problem hypervisor drivers need to do an extra
validation step when the domain is being started. I recently (commit
3cff23f7, libvirt 5.7.0) added a function to peform such validation
for all interfaces to the QEMU driver -
qemuDomainValidateActualNetDef() - but while that function is a good
single point to call for the multiple places that need to "start" an
interface (domain startup, device hotplug, device update), it can't be
called by the other hypervisor drivers, since 1) it's in the QEMU
driver, and 2) it contains some checks specific to QEMU. For
validation that applies to network devices on *all* hypervisors, we
need yet another interface validation function that can be called by
any hypervisor driver (not just QEMU) right after its network port has
been created during domain startup or hotplug. This patch adds that
function - virDomainActualNetDefValidate(), in the conf directory,
and calls it in appropriate places in the QEMU, lxc, and libxl
drivers.
This new function is the place to put all network device validation
that 1) is hypervisor agnostic, and 2) can't be done until we know the
"actual type" of an interface.
There is no framework for validation at domain startup as there is for
post-parse validation, but I don't want to create a whole elaborate
system that will only be used by one type of device. For that reason,
I just made a single function that should be called directly from the
hypervisors, when they are initializing interfaces to start a domain,
right after conditionally allocating the network port (and regardless
of whether or not that was actually needed). In the case of the QEMU
driver, qemuDomainValidateActualNetDef() is already called in all the
appropriate places, so we can just call the new function from
there. In the case of the other hypervisors, we search for
virDomainNetAllocateActualDevice() (which is the hypervisor-agnostic
function that calls virNetworkPortCreateXML()), and add the call to our
new function right after that.
The new function itself could be plunked down into many places in the
code, but we already have 3 validation functions for network devices
in 2 different places (not counting any basic validation done in
virDomainNetDefParseXML() itself):
1) post-parse hypervisor-agnostic
(virDomainNetDefValidate() - domain_conf.c:6145)
2) post-parse hypervisor-specific
(qemuDomainDeviceDefValidateNetwork() - qemu_domain.c:5498)
3) domain-start hypervisor-specific
(qemuDomainValidateActualNetDef() - qemu_domain.c:5390)
I placed (3) right next to (2) when I added it, specifically to avoid
spreading validation all over the code. For the same reason, I decided
to put this new function right next to (1) - this way if someone needs
to add validation specific to qemu, they go to one location, and if
they need to add validation applying to everyone, they go to the
other. It looks a bit strange to have a public function in between a
bunch of statics, but I think it's better than the alternative of
further fragmentation. (I'm open to other ideas though, of course.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This also isn't required (due to the vportprofile being stored in the
NetDef as a pointer rather than being directly contained), but it
seemed dishonest to not mark it as const (and thus permit users to
modify its contents)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This makes it easier to understand which interface's config caused the
error.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
On s390 machines host-passthrough and host-model CPUs result in the same
guest ABI (with QEMU new enough to be able to tell us what "host" CPU is
expanded to, which was implemented around 2.9.0). So instead of using
host-passthrough CPU when there's no CPU specified in a domain XML we
can safely use host-model and benefit from CPU compatibility checks
during migration, snapshot restore and similar operations.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a graphics device was added to XML that had no video device, libvirt
automatically added a video device which was always of type 'cirrus' on
x86_64, even if the underlying qemu didn't support cirrus.
This patch refines a bit the decision about the type of the video device.
Based on QEMU capabilities, cirrus is still preferred but only added if
QEMU supports it, otherwise VGA is used if supported by QEMU. There is now
no fallback as libvirt only aspires to generate a basic working config and
leaves anything more specific up to higher-level management tools.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
The default video device type selection algorithm we're about to deploy will
increase the amount of code dedicated to the task by amount enough to warrant
factoring the whole thing into its own function so as not to pollute the
caller qemuDomainDeviceVideoDefPostParse(). Do it now so that the actual
algorithm change later on is in a clean commit by itself and easy to review.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
This previous commit introduced a simpler free callback for
hash data with only 1 arg, the value to free:
commit 49288fac96
Author: Peter Krempa <pkrempa@redhat.com>
Date: Wed Oct 9 15:26:37 2019 +0200
util: hash: Add possibility to use simpler data free function in virHash
It missed two functions in the hash table code which need
to call the alternate data free function, virHashRemoveEntry
and virHashRemoveSet.
After the previous patch though, there is no code that
makes functional use of the 2nd key arg in the data
free function. There is merely one log message that can
be dropped.
We can thus purge the current virHashDataFree callback
entirely, and rename virHashDataFreeSimple to replace
it.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add a helper which will covert the PFLASH code file and variable file
into the virStorageSource objects stored in private data so that we can
use them with -blockdev while keeping the infrastructure to determine
the path to the loaders intact.
This is a temporary solution until we will want to do snapshots of the
pflash where we will be forced do track the full backing chain in the
XML.
In the meanwhile just convert it partially so that we can stop using
-drive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
To allow converting the pflash drives to blockdev we will need a
virStorageSource to allow using our helpers. Temporarily prior to
coverting loader data to a virStorageSoruce add private data which will
house this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When starting a domain without a CPU model specified in the domain XML,
QEMU will choose a default one. Which is fine unless the domain gets
migrated to another host because libvirt doesn't perform any CPU ABI
checks and the virtual CPU provided by QEMU on the destination host can
differ from the one on the source host.
With QEMU 4.2.0 we can probe for the default CPU model used by QEMU for
a particular machine type and store it in the domain XML. This way the
chosen CPU model is more visible to users and libvirt will make sure
the guest will see the exact same CPU after migration.
Architecture specific notes
- aarch64: We only set the default CPU for TCG domains as KVM requires
explicit "-cpu host" to work.
- ppc64: The default CPU for KVM is "host" thanks to some hacks in QEMU,
we will translate the default model to the model corresponding to the
host CPU ("POWER8" on a Power8 host, "POWER9" on Power9 host, etc.).
This is not a problem as the corresponding CPU model is in fact an
alias for "host". This is probably not ideal, but it's not wrong and
the default virtual CPU configured by libvirt is the same QEMU would
use. TCG uses various CPU models depending on machine type and its
version.
- s390x: The default CPU for KVM is "host" while TCG defaults to "qemu".
- x86_64: The default CPU model (qemu64) is not runnable on any host
with KVM, but QEMU just disables unavailable features and starts
happily.
https://bugzilla.redhat.com/show_bug.cgi?id=1598151https://bugzilla.redhat.com/show_bug.cgi?id=1598162
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Another weird bug appeared concerning qemu namespaces. Basically
the problem is as follows:
1) Issue an API that causes libvirt to create a node in domain's
namespace, say /dev/nvme0n1 with 8:0 as major:minor (the API can
be attach-disk for instance). Or simply create the node from a
console by hand.
2) Detach the disk from qemu.
3) Do something that makes /dev/nvme0n1 change it's minor number.
4) Try to attach the disk again.
The problem is, in a few cases - like disk-detach - we don't
remove the corresponding /dev node from the mount namespace
(because it may be used by some other disk's backing chain). But
this creates a problem, because if the node changes its MAJ:MIN
numbers we don't propagate the change into the domain's
namespace. We do plain mknod() and ignore EEXIST which obviously
is not enough because it doesn't guarantee that the node has
updated MAJ:MIN pair.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1752978
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuDomainDefFormatBufInternal function wasn't testing whether the CPU
was actually defined in the XML and saving such a domain resulted in the
following backtrace:
0 in qemuDomainMakeCPUMigratable (cpu=0x0)
1 in qemuDomainDefFormatBufInternal()
2 in qemuDomainDefFormatXMLInternal()
3 in qemuDomainDefFormatLive()
4 in qemuDomainSaveInternal()
5 in qemuDomainSaveFlags()
6 in qemuDomainSave()
7 in virDomainSave()
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some layered products such as oVirt have requested a way to avoid being
blocked by guest agent commands when querying a loaded vm. For example,
many guest agent commands are polled periodically to monitor changes,
and rather than blocking the calling process, they'd prefer to simply
time out when an agent query is taking too long.
This patch adds a way for the user to specify a custom agent timeout
that is applied to all agent commands.
One special case to note here is the 'guest-sync' command. 'guest-sync'
is issued internally prior to calling any other command. (For example,
when libvirt wants to call 'guest-get-fsinfo', we first call
'guest-sync' and then call 'guest-get-fsinfo').
Previously, the 'guest-sync' command used a 5-second timeout
(VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT), whereas the actual command that
followed always blocked indefinitely
(VIR_DOMAIN_QEMU_AGENT_COMMAND_BLOCK). As part of this patch, if a
custom timeout is specified that is shorter than
5 seconds, this new timeout is also used for 'guest-sync'. If there is
no custom timeout or if the custom timeout is longer than 5 seconds, we
will continue to use the 5-second timeout.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As suggested by Cole, this patch uses the domain capabilities to
validate the supported video model types. This allows us to remove the
model type validation from qemu_process.c and qemu_domain.c and
consolidates it all in a single place that will automatically adjust
when new domain capabilities are added.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Continue consolidation of video device validation started in previous
patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
The goal is to move all of the video device validation to a single place
and use domain caps to validate the supported video device models. Since
qemuDomainDeviceDefValidateVideo() is called from
qemuProcessStartValidate(), these changes should not change anny
behavior.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
This allows us to simplify the function and avoid jumping to 'cleanup'.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
When the virDomainCapsDeviceDefValidate() function returned an error
status (-1), we were aborting the function early, but returning the
default return value (0). This patch properly returns an error in that
case.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
In an effort to remove as much gnulib usage as possible let's
reimplement virFileReadLink. Since it's used in two places only I opted
to open-code it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new helper to initialize child XML element buffers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The pconfig feature was enabled in QEMU by accident in 3.1.0. All other
newer versions do not support it and it was removed from the
Icelake-Server CPU model in QEMU.
We don't normally change our CPU models even when QEMU does so to avoid
breaking migrations between different versions of libvirt. But we can
safely do so in this specific case. QEMU never supported enabling
pconfig so any domain which was able to start has pconfig disabled.
With a small compatibility hack which explicitly disables pconfig when
CPU model equals Icelake-Server in migratable domain definition, only
one migration scenario stays broken (and there's nothing we can do about
it): from any host to a host with libvirt < 5.10.0 and QEMU > 3.1.0.
https://bugzilla.redhat.com/show_bug.cgi?id=1749672
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The qemuDomainObjEnterMonitor() should not be called without a
job set. Catch this error and produce a warning message if such
call occurred.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This introduces semantic validation for SVE-related features,
preventing the user from combining them in invalid ways; it also
automatically enables overall SVE support if any SVE vector
length has been enabled by the user to make sure QEMU behaves
correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we don't have to deal with errors of virBuffer we can also make
this function void.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All OSes that we support have libselinux >= 2.5 except for Ubuntu 16.04
where the version is 2.4.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In many cases we used virDomainDiskByName to solely look up disk by
target. We have a new helper now so we can replace it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In some cases we want to prepare a @src which is not meant to belong to
a disk and thus does not require us to copy the data. Allow passing in
NULL @disk into qemuDomainPrepareDiskSourceData.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Note in the comment that this function prepares the storage source based
on the configuration of the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The function does not do anything that could fail. Remove the return
value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuDomainPrepareDiskSourceData historically prepared everything but
we've split out the majority of the functionality so that it sets up
predominately only according to the configuration of the disk. There
was one leftover bit of setting the gluster debug level from the config.
Split this out into a separate function so that
qemuDomainPrepareDiskSourceData only prepares based on the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
ACKed-by: Eric Blake <eblake@redhat.com>
The @freeTmpPath boolean is used to determine if @tmpPath holds
an allocated memory or is a pointer to a constant string and
therefore if it needs to be freed or not when returning from the
function. Well, we can unify the way we set @tmpPath so that it
always holds an allocated memory and thus always must be freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are three cases where vir*DeviceGetPath() returns a const
string. In these cases, the string is initialized in
corresponding vir*DeviceNew() calls which fail if string couldn't
be allocated. There's no point in checking the second time if the
string is NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In some places we need to check if a hostdev has VFIO backend.
Because of how complicated virDomainHostdevDef structure is, the
check consists of three lines. Move them to a function and
replace all checks with the function call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace:
if (!s && VIR_STRDUP(s, str) < 0)
goto;
with:
if (!s)
s = g_strdup(str);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This commit let QEMU command line define 'xres' and 'yres' properties
if XML contains both properties from video model: based on resolution
fields 'x' and 'y'. There is a conditional structure inside
qemuDomainDeviceDefValidateVideo() that validates if video model
supports this feature. This commit includes the necessary changes to
cover resolution for 'video-qxl-resolution' test cases too.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that all the types using VIR_AUTOUNREF have a cleanup func defined
to virObjectUnref, use g_autoptr instead of VIR_AUTOUNREF.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all of its use by the GLib
macro version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOCLEAN is just an alias for g_auto. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Also define the macro for building with GLib older than 2.60
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When undefining a UEFI domain its nvram file has to be properly handled as
well. It's mandatory to use one of --nvram and --keep-nvram options when
'virsh undefine <domain>' is issued for a UEFI domain. To fix the bug as
reported, virsh should return an error message if neither option is used
and the nvram file should be removed when --nvram is given.
The cause of the problem is that when qemuDomainUndefineFlags() is invoked
on an inactive domain the path to its nvram file is empty. This commit
aims to fix this by formatting and filling in the path in time for the
nvram removal code to run properly.
https://bugzilla.redhat.com/show_bug.cgi?id=1751596
Signed-off-by: Pavel Mores <pmores@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace use of the gnulib base64 module with glib's own base64 API family.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch adds the implementation of the ccf-assist pSeries
feature, based on the QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
capability that was added in the previous patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is a very simple framebuffer device supported by qemu that
is mostly intended to use as a boot framebuffer in conjunction with a
vgpu. However, there is also a standalone ramfb device that can be used
as a primary display device and is useful for e.g. aarch64 guests where
different memory mappings between the host and guest can prevent use of
other devices with framebuffers such as virtio-vga.
https://bugzilla.redhat.com/show_bug.cgi?id=1679680 describes the
issues in more detail.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
The way in which the qemu driver generates aliases for disks involves
ignoring the partition number part of a target dev name. This means that
all partitions of a block device and the device itself all end up with the
same alias. If multiple such disks are specified in XML, the resulting
name clash makes qemu invocation fail.
Since attaching partitions to qemu VMs doesn't seem to make much sense
anyway, disallow partitions in target specifications altogether.
https://bugzilla.redhat.com/show_bug.cgi?id=1346265
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The video private data was not initializing the vhostuser FD
causing us to attempt to close FD 0 many times over.
Fixes
commit ca60ecfa8c
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Mon Sep 23 14:44:36 2019 +0400
qemu: add qemuDomainVideoPrivate
Since the test suite does not invoke qemuExtDevicesStart(), no
vhost_user_fd will be present when generating test XML. To deal
with this we can must a fake FD number. While the current XML
is using FD == 0, we pick a very interesting number that's unlikely
to be a real FD, so that we're more likely to see any mistakes
closing the invalid FD.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU_CAPS_INCREMENTAL_BACKUP will be enabled once all bits of the
incremental backup feature work as expected which means also properly
interacting with blockjobs and snapshots.
Thus we can allow blockjobs and snapshots if QEMU_CAPS_INCREMENTAL_BACKUP
is present even when checkpoints exist.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Rather than having to fix 5 places once we support the combination, add
a function called by all the blockjob/snapshot APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Finish the refactor by moving and renaming functions from qemu_domain.c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Move it to qemu_domain.c and rename it to qemuDomainObjFromDomain. This
will allow reusing it after splitting out checkpoint code from
qemu_driver.c.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similar to the qemu_tpm.c, add a unit with a few functions to
start/stop and setup the cgroup of the external vhost-user-gpu
process. See function documentation.
The vhost-user connection fd is set on qemuDomainVideoPrivate struct.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
To support virtio VGA with vhost-user, vhost-user-vga device is necessary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The same validation should be done for both static network devices and
hotplugged devices, but they are currently inconsistent. Move all the
relevant validation from qemuBuildInterfaceCommandLine() into the new
function qemuDomainValidateActualNetDef() and call the latter from
the former.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Let's pull this hunk out into a function, so it can be reused
in another codepath that needs to do the same thing.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
For VM started and migrated/saved without slirp-helpers, let's prevent
the automatic setup (as it would fail to migrate otherwise).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Save & restore the slirp helper PID associated with a network
interface & the probed features.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add dbusVMStates to keep a list of dbus-vmstate objects needed for
migration. They are populated on the command line during start or
qemuDBusVMStateAdd/Remove() will hotplug them as needed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since libvirt stores the backing chain into the XML in a nested way it
is the prime possibility to hit libxml2's parsing limit of 256 layers.
Introduce code which will crawl the backing chain and verify that it's
not too deep. The maximum nesting is set to 200 layers so that there's
still some space left for additional properties or nesting into snapshot
XMLs.
The check is applied to all disk use cases (starting, hotplug, media
change) as well as block copy which changes image and snapshots.
We simply report an error and refuse the operation.
Without this check a restart of libvirtd would result in the status XML
failing to be parsed and thus losing the VM.
https://bugzilla.redhat.com/show_bug.cgi?id=1524278
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When virtlogd is used to capture QEMU's stdout, qemuDomainObjTaint would
always fail to write the message to the log file when QEMU is already
running (i.e., outside qemuProcessLaunch). This can happen during device
hotplug or by sending a custom QEMU guest agent command:
warning : qemuDomainObjTaint:8757 : Domain id=9 name='blaf'
uuid=9cfa4e37-2930-405b-bcb4-faac1829dad8 is tainted:
custom-ga-command
error : virLogHandlerDomainOpenLogFile:388 : Cannot open log file:
'/var/log/libvirt/qemu/blaf.log': Device or resource busy
error : virNetClientProgramDispatchError:172 : Cannot open log file:
'/var/log/libvirt/qemu/blaf.log': Device or resource busy
The fix is easy, we just need to use the right API for appending a
message to QEMU log file instead of creating a new log context.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A specially crafted XML which would reference a non-existing disk but
request the mirror to be registered with the blockjob could potentially
make the parser dereference NULL. Fix it by moving the code slightly and
just treat it as a wrong job XML. Found by Coverity.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
In addition to the data that libvirt needs and extracts internally,
copy and store the whole 'props' JSON sub-object of the data returned by
query-hotpluggable-cpus for future use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add support to specify a boot order on vfio-ccw passthrough devices.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Refactoring the method signatures in preparation for
checking boot index of the mediated devices.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Changing the error messages to report the problem encountered.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Moving the hostdev boot support validation from the command line
generator code into the domain validation code.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Simplify the command line formatter by complicating the validator.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Store the namespace URI as const char*, instead of in a function.
Suggested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that virDomainXMLNamespace matches virXMLNamespace,
we no longer need to keep both around.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Neither the xmlDocPtr nor the root xmlNode (also passed
in the XPathContext) are interesting to the callees.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Implement job handling for the block copy job (drive/blockdev-mirror)
when using -blockdev. In contrast to the previously implemented
blockjobs the block copy job introduces new images to the running qemu
instance, thus requires a bit more handling.
When copying to new images the code now makes use of blockdev-create to
format the images explicitly rather than depending on automagic qemu
behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU finally exposes an interface which allows us to instruct it to
format or create arbitrary images. This is required for blockdev
integration of block copy and snapshots as we need to pre-format images
prior to use with blockdev-add.
This path introduces job handling and also helpers for formatting and
attaching a whole image described by a virStorageSource.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 3f93884a4d where the job handling of commit jobs with
blockdev was added I've forgot to add a 'break' in the switch fomatting
the status XML. Thankfully this would not be a problem as the cases
where this fell through didn't have any code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The utility of the function is extremely limited as for block copy
we need to register the mirror chain earlier than when it's set with the
disk. This means that it would be open-coded in that case.
Avoid any weird usage and just open-code the only current usage, remove
the function, and reword the docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename qemuDomainObjPrivateXMLFormatBlockjobFormatChain to
qemuDomainObjPrivateXMLFormatBlockjobFormatSource and add a 'chain'
parameter which allows controlling whether the backing chain is
formatted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU version 2.12.1 introduced a performance feature under commit
be7773268d98 ("target-i386: add KVM_HINTS_DEDICATED performance hint")
This patch adds a new KVM feature 'hint-dedicated' to set this performance
hint for KVM guests. The feature is off by default.
To enable this hint and have libvirt add "-cpu host,kvm-hint-dedicated=on"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description in conjunction with CPU mode='host-passthrough'.
<features>
<kvm>
<hint-dedicated state='on'/>
</kvm>
</features>
...
<cpu mode='host-passthrough ... />
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU shows a warning message if partial NUMA mapping is set. This patch
adds a warning message in libvirt when editing the XML. It must be an
error in future, when QEMU remove this ability.
Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to qemuDomainDefFormatBufInternal.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to qemuDomainDefCopy.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver already does some <rng> model validation, based on
qemuCaps. However, the logic for exposing <rng> model values in domcaps
is basically identical. This drops the qemuCaps checking and compares
against the domCaps data directly.
This approach makes it basically impossible to add a new <rng> model to
the qemu driver without extending domcaps. The validation can also
be shared with other drivers eventually.
Reviewed-by: Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Fill in virDomainCaps at Validate time and use it to call
virDomainCapsDeviceDefValidate
Reviewed-by: Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
I find this function more readable if checks for passed storage
source are done first and backing chain is done last. Mixing them
together does not hurt, but is less readable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Time to actually issue the QMP transactions that create and delete
persistent checkpoints, resolving TODOs intentionally left earlier in
the series. For create, we only need one transaction: inside, we
visit all disks affected by the checkpoint, and create a new enabled
bitmap, as well as disabling the bitmap of the first ancestor
checkpoint (if any) that also had a bitmap. For deletion, we need
multiple QMP calls: for each disk, if there is an ancestor checkpoint
with a bitmap, then the bitmap must be merged (including activating
the ancestor bitmap if the leaf node changes), all before deleting the
bitmap from the checkpoint being removed.
Signed-off-by: Eric Blake <eblake@redhat.com>
Qemu bitmap operations require knowing the node name associated with
the format layer (the qcow2 file); as upcoming patches will be
grabbing that information frequently, make a helper function to access
it.
Another potential benefit of this function is that we have a single
place where we could insert a QMP node-name scraping call if we don't
currently know the node name, when -blockdev is not supported;
however, the goal is that we hopefully don't ever have to do that
because we instead scrape node names only at the point where they
change.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A lot of this work heavily copies from the existing snapshot APIs.
What's more, this patch is (intentionally) very similar to the
checkpoint code just added in the test driver, to the point that qemu
checkpoints are not fully usable in this patch, but it at least
bisects and builds cleanly. The separation between patches is done
because the grunt work of saving and restoring XML and tracking
relations between checkpoints is common to the test driver, while the
later patch adding integration with QMP is specific to qemu.
Also note that the interlocking to prevent checkpoints and snapshots
from existing at the same time will be a separate patch, to make it
easier to revert that restriction when we finally round out the design
for supporting interaction between the two concepts.
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduce the handler for finalizing a block commit and active bloc
commit job which will allow to use it with blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce the handler for finalizing a block pull job which will allow
to use it with blockdev.
This patch also contains some additional machinery which is required to
store all the relevant job data in the status XML which will also be
reused with other block job types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The <mirror> subelement is used in two ways: in a commit job to point to
existing storage, and in a block-copy job to point to additional
storage. We need a way to track only the distinct storage.
This patch introduces qemuBlockJobDiskRegisterMirror which registers the
mirror chain separately only for jobs which require it. This also comes
with remembering that in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
The PR manager is a property of the format layer in qemu so we need to
be able to track it also in the chains of orphaned block jobs.
Add a helper for qemu to look also into the blockjob state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the guest unplugs the disk frontend libvirt is responsible for
deleting the backend. Since a blockjob may still have a reference to the
backing chain when it is running we'll have to store the metadata for
the unplugged disk for future reference.
This patch adds 'chain' and 'mirrorChain' fields to 'qemuBlockJobData'
to keep them around with the job along with status XML machinery and
tests. Later patches will then add code to change the ownership of the
chain when unplugging the disk backend.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add support for handling the event either synchronously or
asynchronously using the event thread.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that block job data is stored in the status XML portion we need to
make sure that everything which changes the state also saves the status
XML. The job registering function is used while parsing the status XML
so in that case we need to skip the XML saving.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to store the block job state in the status XML so that we can
properly recover any data when reconnecting after startup and also in
the end to be able to do any transition of the backing chain that
happened while libvirt was not connected to the monitor.
First step is to note the name, type, state and corresponding disk into
the status XML.
We also need to make sure that a broken blockjob does not make libvirt
lose the VM, thus many of the errors just mark the job as invalid.
Later on we'll cancel all invalid jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Block jobs currently belong to disks only so we can look up the block
job data for them in the corresponding disks. This won't be the case
when using blockdev as certain jobs don't even correspond to a disk and
most of them can run on a part of the backing chain.
Add a global table of blockjobs which can be used to look up the data
for the blockjobs when the job events need to be processed.
The table is a hash table organized by job name and has a reference to
the job. New and running jobs will later be added to this table.
Reference counting will allow to reap job state for synchronous callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to qemuDomainSaveStatus add a helper to save the config XML
named qemuDomainSaveConfig.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename qemuDomainObjSaveJob and create a wrapper for it which does not
require 'driver' to be passed and export it so that other palces can
easily save the status XML without having to invoke virDomainSaveStatus
which has unpleasing parameters.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When validating a domain among all the checks there are two that
concern VIR_DOMAIN_LOADER_TYPE_PFLASH specifically. The first
check ensures that on x86 ACPI is enabled when UEFI is requested,
the second ensures that UEFI is used when ACPI is requested on
aarch64. However, check for UEFI is done by plain comparison of
def->os.loader->type which is insufficient because we have
def->os.firmware too.
NB, this wouldn't be a problem for active domain, because on
startup process def->os.loader->type gets filled by
qemuFirmwareEnableFeatures(), but that's not the case for
inactive domains.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1729604
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Update schema and configuration to allow specifying new video type of
'bochs'. Add implementation and tests for qemu.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
For quite some time now it is impossible to connect to a domain
using a HMP monitor, so there is no point in formatting it in the status
XML.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
There are some paths (e.g. /dev/vfio/vfio or /dev/mapper/control)
which are defined in qemu_domain.c and then in qemu_cgroup.c
again. This is suboptimal. Let's move paths into qemu_domain.h and
drop duplicate definitions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Our code would skip adding the default type in this cases, but since we
know that the only reasonable option here is 'fat' we can add it while
starting the VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The storage volume may in fact convert into a directory when starting
the VM so that it may be actually possible to use it.
This is a regression caused by c9b27af32d as moving the check to
validation time without adjustment causes problems as the volumes are
not translated yet.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Filter out the given capabilities and set domain taint if we've done so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For testing purposes it's sometimes desired to be able to control the
presence of capabilities of qemu. This adds the possibility to do this
via the qemu namespace.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly how we allow adding arbitrary command line arguments and
environment variables this patch introduces the ability to control
libvirt's perception of the qemu process by tweaking the capability bits
for testing purposes.
The idea is to allow developers and users either test a new feature by
enabling it early or disabling it to see whether it introduced
regressions.
This feature is not meant for production use though, so users should
handle it with care.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify the main function by splitting out how we parse the extra
passthrough environment variables.
Note that the validation function checks that the first letter must be a
character or underscore which makes the check whether the name is
redundant.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify the main function by splitting out how we parse the extra
passthrough commandline arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu_conf.c deals with the configuration file. Better fit for the
structure and freeing function will be qemu_domain.c where the rest of
the namespace parsing/formatting stuff resides.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The data injected via the namespace may contain also other things than
commandline passthrough definitions. Rename it to make it more
universal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we no longer support the HMP monitor, remove some dead code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
According to sPAPR, addresses are 32-bit rather than 64-bit.
Update qemuDomainDeviceDefValidateAddress() accordingly.
https://bugzilla.redhat.com/show_bug.cgi?id=1598657
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a switch() statement and prepare for validating
more address types than just PCI.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu_domain.c is now the only place that uses it, so we can move it from
qemu_parse_command.h
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Log the flags passed to the function in a exploded state so that it's
easily visible what's happening to the image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 76b9aba2ba I refactored how the function treats the readonly
flag which introduced a bug when we'd not allow to force read-write
state for an image.
This created problems with blockjobs where we need to temporarily
force images to have read-write permissions.
Rename QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_READ_ONLY to
QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_FORCE_READ_ONLY and also introduce
a complement QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_FORCE_READ_WRITE which
will allow to force write access.
https://bugzilla.redhat.com/show_bug.cgi?id=1717768
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 76b9aba2ba I tried to refactor qemuDomainStorageSourceAccessAllow
but used wrong operators for adding bitwise flags.
This way the flags would result in 0 if any of them would be applied.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All current IOMMU features are specific to Intel IOMMU, so
understandably we check for the corresponding capabilities
inside the Intel-specific switch() branch; however, we want
to make sure SMMUv3 IOMMU users get an error if they try to
enable any of those features in their guest, and performing
the capability checks unconditionally is both the easiest
way to achieve that, as well as the one least likely to
result in us inadvertently letting users enable some new
Intel-specific IOMMU feature for ARM guests later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SMMUv3 is an IOMMU implementation for ARM virt guests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ensure unexpected values are dealt with correctly, that
is by invoking virReportEnumRangeError() and immediately
returning a negative value to the caller.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Device validation should not have to wait until command line
generation time. Moving the code to a separate function also
allows us to avoid some unnecessary repetition.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In refactoring the snapshot code to prepare for checkpoints, I changed
qemuDomainMomentDiscardAll to take a callback that would handle the
cleanup of either a snapshot or a checkpoint, but failed to set the
callback on one of the two snapshot callers. As a result, 'virsh
undefine $dom --snapshots-metadata' crashed on a NULL function
dereference.
Fixes: a487890d37
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1707708
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
