libvirt was able to set the host_mtu option when an MTU was explicitly
given in the interface config (with <mtu size='n'/>), set the MTU of a
libvirt network in the network config (with the same named
subelement), and would automatically set the MTU of any tap device to
the MTU of the network.
This patch ties that all together (for networks based on tap devices
and either Linux host bridges or OVS bridges) by learning the MTU of
the network (i.e. the bridge) during qemuInterfaceBridgeConnect(), and
returning that value so that it can then be passed to
qemuBuildNicDevStr(); qemuBuildNicDevStr() then sets host_mtu in the
interface's commandline options.
The result is that a higher MTU for all guests connecting to a
particular network will be plumbed top to bottom by simply changing
the MTU of the network (in libvirt's config for libvirt-managed
networks, or directly on the bridge device for simple host bridges or
OVS bridges managed outside of libvirt).
One question I have about this - it occurred to me that in the case of
migrating a guest from a host with an older libvirt to one with a
newer libvirt, the guest may have *not* had the host_mtu option on the
older machine, but *will* have it on the newer machine. I'm curious if
this could lead to incompatibilities between source and destination (I
guess it all depends on whether or not the setting of host_mtu has a
practical effect on a guest that is already running - Maxime?)
Likewise, we could run into problems when migrating from a newer
libvirt to older libvirt - The guest would have been told of the
higher MTU on the newer libvirt, then migrated to a host that didn't
understand <mtu size='blah'/>. (If this really is a problem, it would
be a problem with or without the current patch).
Open /dev/vhost-scsi, and record the resulting file descriptor, so that
the guest has access to the host device outside of the libvirt daemon.
Pass this information, along with data parsed from the XML file, to build
a device string for the qemu command line. That device string will be
for either a vhost-scsi-ccw device in the case of an s390 machine, or
vhost-scsi-pci for any others.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Propagate the selected or default level to qemu if it's supported.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1376009
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
QEMU added support for ivshmem-plain and ivshmem-doorbell. Those are
reworked varians of legacy ivshmem that are compatible from the guest
POV, but not from host's POV and have sane specification and handling.
Details about the newer device type can be found in qemu's commit
5400c02b90bb:
http://git.qemu.org/?p=qemu.git;a=commit;h=5400c02b90bb
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add the secret object so the 'passwordid=' can be added if the command line
if there's a secret defined in/on the host for TCP chardev TLS objects.
Preparation for the secret involves adding the secinfo to the char source
device prior to command line processing. There are multiple possibilities
for TCP chardev source backend usage.
Add test for at least a serial chardev as an example.
previous commit:
commit 2c3223785c
Author: John Ferlan <jferlan@redhat.com>
Date: Mon Jun 13 12:30:34 2016 -0400
qemu: Add the ability to hotplug the TLS X.509 environment
added a parameter "bool listen" in some methods. This
unfortunately clashes with the listen() method, causing
compile failures on certain platforms (RHEL-6 for example)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the incoming XML defined a path to a TLS X.509 certificate environment,
add the necessary 'tls-creds-x509' object to the VIR_DOMAIN_CHR_TYPE_TCP
character device.
Likewise, if the environment exists the hot unplug needs adjustment as
well. Note that all the return ret were changed to goto cleanup since
the cfg needs to be unref'd
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since we already have a function that will generate the drivestr from
the alias, let's use it and remove the qemuDeviceDriveHostAlias.
Move the QEMU_DRIVE_HOST_PREFIX definition into qemu_alias.h
Also alter qemuAliasFromDisk to use the QEMU_DRIVE_HOST_PREFIX instead
of "drive-%s".
Put it into separate function called qemuDomainPrepareChannel() and call
it from the new qemuProcessPrepareDomain().
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Move the module from qemu_command.c to a new module virqemu.c and
rename the API to virQEMUBuildObjectCommandline.
This API will then be shareable with qemu-img and the need to build
a security object for luks support.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Similar to the qemuDomainSecretDiskPrepare, generate the secret
for the Hostdev's prior to call qemuProcessLaunch which calls
qemuBuildCommandLine. Additionally, since the secret is not longer
added as part of building the command, the hotplug code will need
to make the call to add the secret in the hostdevPriv.
Since this then is the last requirement to pass a virConnectPtr
to qemuBuildCommandLine, we now can remove that as part of these
changes. That removal has cascading effects through various callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than needing to pass the conn parameter to various command
line building API's, add qemuDomainSecretPrepare just prior to the
qemuProcessLaunch which calls qemuBuilCommandLine. The function
must be called after qemuProcessPrepareHost since it's expected
to eventually need the domain masterKey generated during the prepare
host call. Additionally, future patches may require device aliases
(assigned during the prepare domain call) in order to associate
the secret objects.
The qemuDomainSecretDestroy is called after the qemuProcessLaunch
finishes in order to clear and free memory used by the secrets
that were recently prepared, so they are not kept around in memory
too long.
Placing the setup here is beneficial for future patches which will
need the domain masterKey in order to generate an encrypted secret
along with an initialization vector to be saved and passed (since
the masterKey shouldn't be passed around).
Finally, since the secret is not added during command line build,
the hotplug code will need to get the secret into the private disk data.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The values are currently limited to LLONG_MAX which causes some
problems. QEMU conveniently changed their maximum to 1e15 (1 PB) which
is enough for some time and we need to adapt to that so that we don't
throw "Unknown error" messages. Strictly limiting these values actually
fixes some corner case values (off-by-one checks in QEMU probably).
Since values out of the new specified range do not overflow anything,
change the type of error as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1317531
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Now that there is just one format of the memory balloon command line
used the code can be merged into a single function.
Additionally with some tweaks to the control flow the code is easier to
read.
Essentially revert commit 3a6204c which added these to allow the test
suite to pass without depending on the host system state.
Since commit 4b527c1 we already mock virSCSIDeviceGetSgName, so these
callbacks are useless.
Add new function to manage adding the RNG device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also modify the qemuBuildRNGDevStr to use const virDomainDef instead
of virDomainDefPtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the memballoon device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also modify the qemuBuildMemballoonDevStr to use const virDomainDef
instead of virDomainDefPtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the host device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also modify qemuBuildPCIHostdevDevStr, qemuBuildUSBHostdevDevStr,
and qemuBuildSCSIHostdevDevStr to use const virDomainDef instead
of virDomainDefPtr.
Make qemuBuildPCIHostdevPCIDevStr and qemuBuildUSBHostdevUSBDevStr
static to the qemu_command.c.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the redirdev device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also move the qemuBuildRedirdevDevStr closer to the new function and
modify to use the const virDomainDef instead of virDomainDefPtr
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the watchdog device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also since qemuBuildWatchdogDevStr was only local here, make it static as
well as modifying the const virDomainDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the sound device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also since qemuBuildSoundDevStr was only local here, make it static as
well as modifying the const virDomainDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the input device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Make qemuBuildUSBInputDevStr static since only this module calls it.
Also the change to use const virDomainDef forces other changes.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the serial device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Using const virDomainDef causes collateral damage in other called APIs
which need to make the similar adjustment
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the -fsdev options to the
command line removing that task from the mainline qemuBuildCommandLine.
Alter the code slightly to perform the !caps and fsdev failure check
up front.
Since both qemuBuildFSStr and qemuBuildFSDevStr are local, make them
static and fix their prototypes to use the const virDomainDef as well.
Make some minor formatting changes for long lines.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the disk -drive options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also since using const virDomainDef in new function, that means other
functions called needed to change their usage.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the hub -device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also make qemuBuildHubDevStr static to the module since it's only
used here.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the controller -device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also adjust to using const virDomainDef instead of virDomainDefPtr.
This causes collateral damage in order to modify called APIs to use
the const virDomainDef instead as well.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If use of virtlogd is enabled, then use it for backing the
character device log files too. This avoids the possibility
of a guest denial of service by writing too much data to
the log file.
Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca334). However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited. In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains). That way we can change it
in the future.
The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Create new modules qemu_domain_address.c and qemu_domain_address.h to
contain all the new functions and header data. Additionally move any
supporting static functions.
Make qemuDomainSupportsPCI non static.
Also, move and rename the following:
qemuSetSCSIControllerModel to qemuDomainSetSCSIControllerModel
qemuCollectPCIAddress to qemuDomainCollectPCIAddress
qemuValidateDevicePCISlotsPIIX3 to qemuDomainValidateDevicePCISlotsPIIX3
qemuAssignDevicePCISlots to qemuDomainAssignDevicePCISlots
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the misplaced function from qemu_command.c to qemu_interface.c
since it's closer in functionality there and had less to do with building
the command line.
Rename function to qemuInterfaceBridgeConnect and modify callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the misplaced function from qemu_command.c to qemu_interface.c
since it's closer in functionality there and had less to do with building
the command line.
Rename function to qemuInterfaceDirectConnect and modify callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Extract out the qemuParseCommandLine{String|Pid} into their own
separate module - taking with it all the various static functions.
Causes a ripple effect with a few other modules to include the
new qemu_parse_command.h.
Narrowed down the list of #include's in the split out module to
those that are necessary for build.
when appropriate, of course. If the config for a domain specifies boot
order with <boot dev='blah'/> elements, e.g.:
<os>
...
<boot dev='hd'/>
<boot dev='network'/>
</os>
Then the first disk device in the config will have ",bootindex=1"
appended to its qemu commandline -device options, and the first (and
*only* the first) network interface device will get ",bootindex=2".
However, if the first network interface device is a "hostdev" device
(an SRIOV Virtual Function (VF) being assigned to the domain with
vfio), then the bootindex option will *not* be appended. This happens
because the bootindex=n option corresponding to the order of "<boot
dev='network'/>" is added to the -device for the first network device
when network device commandline args are constructed, but if it's a
hostdev network device, its commandline arg is instead constructed in
the loop for hostdevs.
This patch fixes that omission by noticing (in bootHostdevNet) if the
first network device was a hostdev, and if so passing on the proper
bootindex to the commandline generator for hostdev devices - the
result is that ",bootindex=2" will be properly appended to the first
"network" device in the config even if it is really a hostdev
(including if it is assigned from a libvirt network pool). (note that
this is only the case if there is no <bootmenu enabled='yes'/> element
in the config ("-boot menu-on" in qemu) , since the two are mutually
exclusive - when the bootmenu is enabled, the individual per-device
bootindex options can't be used by qemu, and we revert to using "-boot
order=xyz" instead).
If a greater level of control over boot order is desired (e.g., more
than one network device should be tried, or a network device other
than the first one encountered in the config), then <boot
dev='network'/> in the <os> element should not be used; instead, the
individual device elements in the config should be given a "<boot
order='n'/>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1278421
https://bugzilla.redhat.com/show_bug.cgi?id=1240439
Ta-da! Now that we know how to open a macvtap device multiple
times, we can finally enable the multiqueue feature. Everything
else is already prepared (e.g. command line generation) from the
previous iteration where the feature was implemented for
TUN/TAP devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Make callers of qemuBuildCommandLine responsible for providing the URI
which should be passed as a parameter for -incoming.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Fixes the following error when attempting to add a disk with bus='virtio'
to a machine which actually supports virtio-mmio (caught with ARM virt):
virtio disk cannot have an address of type 'virtio-mmio'
The problem has been likely introduced by
e8d5517254. Before that
qemuAssignDevicePCISlots() was never called for ARM "virt" machine.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1258361
When attaching a disk, controller, or rng using an address type ccw
or s390, we need to ensure the support is provided by both the machine.os
and the emulator capabilities (corollary to unconditional setting when
address was not provided for the correct machine.os and emulator.
For an inactive guest, an addition followed by a start would cause the
startup to fail after qemu_command builds the command line and attempts
to start the guest. For an active guest, libvirtd would crash.
Rename qemuBuildShmemDevCmd to qemuBuildShmemDevStr and change the
return type so that it can be reused in the device hotplug code later.
And split the chardev creation part in a new function
qemuBuildShmemBackendStr for reuse in the device hotplug code later.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The SCSI Architecture Model defines a logical unit address
as 64-bits in length, so change the field accordingly so
that the entire value could be stored.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
This makes sure that that the commandlines generated for devices and
controller devices are all using the alias that has been set in the
controller's object as the id of the controller, rather than
hardcoding a printf (or worse, encoding exceptions to the standard
${controller}${index} into the logic)
Since this "fixes" the controller name used for the sata controller,
the commandline arg for the sata controller in the sata test case had
to be adjusted to be "sata0" instead of "ahci0". All other tests
remain unchanged, verifying that the patch causes no other functional
change.
Because the function that finds a controller alias based on a device
def requires a pointer to the full domainDef in order to get the list
of controllers, the arglist of a few functions had to have this added.
There are a few extra exceptions that weren't being accounted for when
creating the alias for a controller. This resulted in 1) incorrect
status XML, and 2) exceptions/printfs of what *should* have been
directly available in the controller alias when constructing device
commandline arguments:
1) The primary (and only) IDE controller on a 440FX machinetype is
hardcoded to be "ide" in qemu.
2) The primary SATA controller on a 440FX machinetype is also
hardcoded to be "ide" in qemu.
3) On machinetypes that don't support multiple PCI buses, the PCI bus
is hardcoded in qemu to have the name "pci".
4) The first usb master controller is "usb", all others are the normal
"usb%d". (note that usb controllers that are not a "master" will have
the same index, and thus alias, as the master).
We needed to pass in the full domainDef and qemuCaps in order to
properly make the decisions about these exceptions.
Rather than have a separate routine to parse the alias of an iothread
returned from qemu in order to get the iothread_id value, parse the alias
when returning and just return the iothread_id in qemuMonitorIOThreadInfoPtr
This set of patches removes the function, changes the "char *name" to
"unsigned int" and handles all the fallout.
Add 'thread_id' to the virDomainIOThreadIDDef as a means to store the
'thread_id' as returned from the live qemu monitor data.
Remove the iothreadpids list from _qemuDomainObjPrivate and replace with
the new iothreadids 'thread_id' element.
Rather than use the default numbering scheme of 1..number of iothreads
defined for the domain, use the iothreadid's list for the iothread_id
Since iothreadids list keeps track of the iothread_id's, these are
now used in place of the many places where a for loop would "know"
that the ID was "+ 1" from the array element.
The new tests ensure usage of the <iothreadid> values for an exact number
of iothreads and the usage of a smaller number of <iothreadid> values than
iothreads that exist (and usage of the default numbering scheme).
Commit f7afeddc added code to report to systemd an array of interface
indexes for all tap devices used by a guest. Unfortunately it not only
didn't add code to report the ifindexes for macvtap interfaces
(interface type='direct') or the tap devices used by type='ethernet',
it ended up sending "-1" as the ifindex for each macvtap or hostdev
interface. This resulted in a failure to start any domain that had a
macvtap or hostdev interface (or actually any type other than
"network" or "bridge").
This patch does the following with the nicindexes array:
1) Modify qemuBuildInterfaceCommandLine() to only fill in the
nicindexes array if given a non-NULL pointer to an array (and modifies
the test jig calls to the function to send NULL). This is because
there are tests in the test suite that have type='ethernet' and still
have an ifname specified, but that device of course doesn't actually
exist on the test system, so attempts to call virNetDevGetIndex() will
fail.
2) Even then, only add an entry to the nicindexes array for
appropriate types, and to do so for all appropriate types ("network",
"bridge", and "direct"), but only if the ifname is known (since that
is required to call virNetDevGetIndex().
Export the required helpers and add backend code to hotplug RNG devices.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Rename qemuBuildRNGDeviceArgs to qemuBuildRNGDevStr and change the
return type so that it can be reused in the device hotplug code later.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This function is used to assign an alias for a RNG device. It will be
later reused when hotplugging RNGs.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Unlike -device, qemu uses a JSON object to add backend "objects" via the
monitor rather than the string that would be passed on the commandline.
To be able to reuse code parts that configure backends for various
devices, this patch adds a helper that will allow generating the command
line representations from the JSON property object.
In order to be able to test for fully reserved PCI buses, assignment of
PCI slots for integrated devices needs to be moved to a separate function.
This also might be a good preparation if we decide to add support for
other chipsets as well.
The default value should be 16 MiB instead of 8 MiB. Only really old
version of upstream QEMU used the 8 MiB as default for vga framebuffer.
Without this change if you update your libvirt where we introduced the
"vgamem" attribute for QXL video device the value will be set to 8 MiB,
but previously your guest had 16 MiB because we didn't pass any value to
QEMU command line which means QEMU used its own 16 MiB as default.
This will affect all users with guest's display resolution higher than
1920x1080.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Particularly in qemuBuildNumaArgStr(), there was a need for the advice
due to memory backing, which needs to know the nodeset it will be pinned
to. With newer qemu this caused the following error when starting
domain:
error: internal error: Advice from numad is needed in case of
automatic numa placement
even when starting perfectly valid domain, e.g.:
...
<vcpu placement='auto'>4</vcpu>
<numatune>
<memory mode='strict' placement='auto'/>
</numatune>
<cpu>
<numa>
<cell id='0' cpus='0' memory='524288'/>
<cell id='1' cpus='1' memory='524288'/>
</numa>
</cpu>
...
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138545
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We are not detecting the presence of FIPS from QEMU, but from procfs and
that means it's not QEMU capability. It was decided that we will pass
this flag to QEMU even if it's not supported by old QEMU binaries.
This patch also reverts changes done by commit a21cfb0f to
qemucapabilitestest and implements a new test case in qemuxml2argvtest.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135431
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1078126
Using 'virsh attach-device --config' (or --persistent) to attach a
file backed lun device will succeed; however, subsequent domain restarts
will result in failure because the configuration of a file backed lun
is not supported.
Although allowing 'illegal configurations' is something that can be
allowed, it may not be practical in this case. Generally, when attaching
a device to a domain means the domain must be running. A way around
this is using the --config (or --persistent) option. When an attach
is done to a running domain, a temporary configuration is modified
first followed by the live update. The live update will make a number
of disk validity checks when building the qemu command to attach the
disk. If any fail, then change is rejected.
Rather than allow a potentially illegal combination, adjust the code
in the configuration path to make the same checks as the running path
will make with respect to disk validity checks. This way we avoid
having the potential for some subsequent start/reboot to fail because
an illegal combination was allowed.
NB: The live path still checks the configuration since it is possible
to just do --live guest modification...
During review of the iSCSI hostdev series, eblake noted that the
prototypes shouldn't have the extranenous space between the "*" and
the function name:
http://www.redhat.com/archives/libvir-list/2014-July/msg01227.html
Since it was more invasive than 1 or 2 lines - I said I'd send a
patch covering this once committed.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move sharable PCI handling functions to domain_addr.[ch], and
change theirs prefix from 'qemu' to 'vir':
- virDomainPCIAddressAsString;
- virDomainPCIAddressBusSetModel;
- virDomainPCIAddressEnsureAddr;
- virDomainPCIAddressFlagsCompatible;
- virDomainPCIAddressGetNextSlot;
- virDomainPCIAddressReleaseSlot;
- virDomainPCIAddressReserveAddr;
- virDomainPCIAddressReserveNextSlot;
- virDomainPCIAddressReserveSlot;
- virDomainPCIAddressSetFree;
- virDomainPCIAddressSetGrow;
- virDomainPCIAddressSlotInUse;
- virDomainPCIAddressValidate;
The only change here is function names, the implementation itself
stays untouched.
Extract common allocation code from DomainPCIAddressSetCreate
into virDomainPCIAddressSetAlloc.
Introduce new files (domain_addr.[ch]) to provide
an API for domain device handling that could be
shared across the drivers.
A list of data types were extracted and moved there:
qemuDomainPCIAddressBus -> virDomainPCIAddressBus
qemuDomainPCIAddressBusPtr -> virDomainPCIAddressBusPtr
_qemuDomainPCIAddressSet -> virDomainPCIAddressSet
qemuDomainPCIAddressSetPtr -> virDomainPCIAddressSetPtr
qemuDomainPCIConnectFlags -> virDomainPCIConnectFlags
Also, move the related definitions and macros.
This uses the new QEMU_CAPS_HOST_PCI_MULTIDOMAIN capability when
present, for -devivce pci-assign, -device vfio-pci, and -pcidevice.
While creating tests for this new functionality, I noticed that the
xmls for two existing tests had erroneously specified an
until-now-ignored domain="0x0002", so I corrected those two tests, and
also added two failure tests to be sure that we alert users who
attempt to use a non-zero domain with a qemu that doesn't support it.
In "src/util/" there are many enumeration (enum) declarations.
Sometimes, it's better using a typedef for variable types,
function types and other usages. Other enumeration will be
changed to typedef's in the future.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Refactor the function to avoid multiple wrappers splitting identical
fields from the now common metadata struct.
The refactor is done by folding in the wrapper used for disk sources
which allows us to lookup secrets via the secret driver. This may allow
using stored secrets for snapshot disk images too in the future.
Since it is an abbreviation, USB should always be fully
capitalized or full lower case, never Usb.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add support for gluster backed images as sources for snapshots in the
qemu driver. This will also simplify adding further network backed
volumes as sources for snapshot in case qemu will support them.
To support passing the path of the test data to the utils, one
more argument is added to virSCSIDeviceGetSgName,
virSCSIDeviceGetDevName, and virSCSIDeviceNew, and the related
code is changed accordingly.
Later tests for the scsi utils will be based on this patch.
Signed-off-by: Osier Yang <jyang@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1019053
When we migrate vms concurrently, there's a chance that libvirtd on
destination assigns the same port for different migrations, which will
lead to migration failure during prepare phase on destination. So we use
virPortAllocator here to solve the problem.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Part of the resolution to:
https://bugzilla.redhat.com/show_bug.cgi?id=1003983
Although most devices available in qemu area defined as PCI devices,
and strictly speaking should only be attached via a PCI slot, in
practice qemu allows them to be attached to a PCIe slot and sometimes
this makes sense.
For example, The UHCI and EHCI USB controllers are usually attached
directly to the PCIe "root complex" (i.e. PCIe slots) on real
hardware, so that should be possible for a Q35-based qemu virtual
machine as well.
We still want to prefer a standard PCI slot when auto-assigning
addresses, though, and in general to disallow attaching PCI devices
via PCIe slots.
This patch makes that possible by adding a new
QEMU_PCI_CONNECT_TYPE_EITHER_IF_CONFIG flag. Three things are done
with this flag:
1) It is set for the "pcie-root" controller
2) qemuCollectPCIAddress() now has a set of nested switches that set
this "EITHER" flag for devices that we want to allow connecting to
pcie-root when specifically requested in the config.
3) qemuDomainPCIAddressFlagsCompatible() adds this new flag to the
"flagsMatchMask" if the address being checked came from config rather
than being newly auto-allocated by libvirt (this knowledge is
conveniently already available in the "fromConfig" arg).
Now any device having the EITHER flag set can be connected to
pcie-root if explicitly requested, but auto-allocated addresses for
those devices will still be standard PCI slots instead.
This patch only loosens the restrictions on devices that have been
specifically requested, but the setup is such that it should be fairly
easy to add new devices.
Most callers of qemuParseKeywords were assigning its return
value to a 'size_t' variable. Then then also checked '< 0'
for error condition, but this will never be true with the
unsigned size_t variable. Rather than using 'ssize_t', change
qemuParseKeywords so that the element count is returned via
an output parameter, leaving the return value solely as an
error indicator.
This avoids a crash accessing beyond the end of an error
upon OOM.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
No need to open code now that we have a nice function.
Interestingly, our virStringFreeList function is typed correctly
(a malloc'd list of malloc'd strings is NOT const, whether at the
point where it is created, or at the point where it is cleand up),
so using it with a 'const char **' argument would require a cast
to keep the compiler. I chose instead to remove const from code
even where we don't modify the argument, just to avoid the need
to cast.
* src/qemu/qemu_command.h (qemuParseCommandLine): Drop declaration.
* src/qemu/qemu_command.c (qemuParseProcFileStrings)
(qemuStringToArgvEnv): Don't force malloc'd result to be const.
(qemuParseCommandLinePid, qemuParseCommandLineString): Simplify
cleanup.
(qemuParseCommandLine, qemuFindEnv): Drop const-correctness to
avoid the need to cast in callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
If user requested multiqueue networking, beside multiple /dev/tap and
/dev/vhost-net openings, we forgot to pass mq=on onto the -device
virtio-net-pci command line. This is advised at:
http://www.linux-kvm.org/page/Multiqueue#Enable_MQ_feature
We had been setting the device alias in the devinceinfo for pci
controllers to "pci%u", but then hardcoding "pci.%u" when creating the
device address for other devices using that pci bus. This all worked
just fine until we encountered the built-in "pcie.0" bus (the PCIe
root complex) in Q35 machines.
In order to create the correct commandline for this one case, this
patch:
1) sets the alias for PCI controllers correctly, to "pci.%u" (or
"pcie.%u" for the pcie-root controller)
2) eliminates the hardcoded "pci.%u" for pci controllers when
generatuing device address strings, and instead uses the controller's
alias.
3) plumbs a pointer to the virDomainDef all the way down to
qemuBuildDeviceAddressStr. This was necessary in order to make the
aliase of the controller *used by a device* available (previously
qemuBuildDeviceAddressStr only had the deviceinfo of the device
itself, *not* of the controller it was connecting to). This made for a
larger than desired diff, but at least in the future we won't have to
do it again, since all the information we could possibly ever need for
future enhancements is in the virDomainDef. (right?)
This should be done for *all* controllers, but for now we just do it
in the case of PCI controllers, to reduce the likelyhood of
regression.
This controller is implicit on q35 machinetypes. It provides 31 PCIe
(*not* PCI) slots as controller 0.
Currently there are no devices that can connect to pcie-root, and no
implicit pci controller on a q35 machine, so q35 is still
unusable. For a usable q35 system, we need to add a
"dmi-to-pci-bridge" pci controller, which can connect to pcie-root,
and provides standard pci slots that can be used to connect other
devices.
