This wil be used in the future, but it makes sense for now as well. It makes
sure there is no mask leftover that would leak.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Pointed out during review on one or two places, but it actually appears in lot
more places. So let's be consistent.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When working on the CAT series one of the changes was that the pointer got
allocated in another part of the code, even when resctrl was not available on
the host system. However this one particular place neglected that so it needs
to be fixed in order to get the proper error message when requesting
<cachetune/> on HW with no support for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commits f83c7c88 and 6eb1f2b9 broke the build on FreeBSD and OSX because
of symbols being undefined for those platforms.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This is a replacement for the existing udevPCIGetMdevTypesCap which is
static to the udev backend. This simple helper constructs the sysfs path
from the device's base path for each mdev type and queries the
corresponding attributes of that type.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This should serve as a replacement for the existing udevFillMdevType
which is responsible for fetching the device type's attributes from the
sysfs interface. The problem with the existing solution is that it's
tied to the udev backend.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This is later going to replace the existing virNodeDevCapMdevType, since:
1) it's going to couple related stuff in a single module
2) util is supposed to contain helpers that are widely accessible across
the whole repository.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
With this commit we finally have a way to read and manipulate basic resctrl
settings. Locking is done only on exposed functions that read/write from/to
resctrlfs. Not in functions that are exposed in virresctrlpriv.h as those are
only supposed to be used from tests.
More information about how resctrl works:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/x86/intel_rdt_ui.txt
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This will make the current functions obsolete and it will provide more
information to the virresctrl module so that it can be used later.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The OEM strings table in SMBIOS allows the vendor to pass arbitrary
strings into the guest OS. This can be used as a way to pass data to an
application like cloud-init, or potentially as an alternative to the
kernel command line for OS installers where you can't modify the install
ISO image to change the kernel args.
As an example, consider if cloud-init and anaconda supported OEM strings
you could use something like
<oemStrings>
<entry>cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/</entry>
<entry>anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os</entry>
</oemStrings>
use of a application specific prefix as illustrated above is
recommended, but not mandated, so that an app can reliably identify
which of the many OEM strings are targetted at it.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 8708ca01c added virNetDevSwitchdevFeature() to check if a network
device has Switchdev capabilities. virNetDevSwitchdevFeature() attempts
to retrieve the PCI device associated with the network device, ignoring
non-PCI devices. It does so via the following call chain
virNetDevSwitchdevFeature()->virNetDevGetPCIDevice()->
virPCIGetDeviceAddressFromSysfsLink()
For non-PCI network devices (qeth, Xen vif, etc),
virPCIGetDeviceAddressFromSysfsLink() will report an error when
virPCIDeviceAddressParse() fails. virPCIDeviceAddressParse() also
logs an error. After commit 8708ca01c there are now two errors reported
for each non-PCI network device even though the errors are harmless.
To avoid the errors, introduce virNetDevIsPCIDevice() and use it in
virNetDevGetPCIDevice() before attempting to retrieve the associated
PCI device. virNetDevIsPCIDevice() uses the 'subsystem' property of the
device to determine if it is PCI. See the sysfs rules in kernel
documentation for more details
https://www.kernel.org/doc/html/latest/admin-guide/sysfs-rules.html
Let's also parse the available processor frequency information on S390
so that it can be utilized by virsh sysinfo:
# virsh sysinfo
<sysinfo type='smbios'>
...
<processor>
<entry name='family'>2964</entry>
<entry name='manufacturer'>IBM/S390</entry>
<entry name='version'>00</entry>
<entry name='max_speed'>5000</entry>
<entry name='serial_number'>145F07</entry>
</processor>
...
</sysinfo>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Since kernel version 4.7, processor frequency information is available
on S390. Let's adjust the parser so this information shows up for virsh
nodeinfo:
# virsh nodeinfo
CPU model: s390x
CPU(s): 8
CPU frequency: 5000 MHz
CPU socket(s): 1
Core(s) per socket: 8
Thread(s) per core: 1
NUMA cell(s): 1
Memory size: 16273908 KiB
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Some ARM platforms, such as the original Raspberry Pi, report the
CPU frequency in the BogoMIPS field of /proc/cpuinfo, so libvirt
parsed that field and returned it through its API.
However, not only many more boards don't report any value there,
but several - including ARMv8-based server hardware, and even the
more recent Raspberry Pi 3 - use this field as originally intended:
to report the BogoMIPS value instead of the CPU frequency.
Since we have no way of detecting how the field is being used,
it's better to report no information at all rather than something
ludicrous like "your shiny 96-core aarch64 virtualization host's
CPUs are running at a whopping 100 MHz".
Partially-resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1206353
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Make the parser both more strict, by not ignoring errors reported
by virStrToLong_ui(), and more permissive, by not failing due to
unrelated fields which just happen to have a know prefix and
accepting any amount of whitespace before the numeric value.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Instead of a generic "your architecture", print the actual
architecture name.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
All different architectures use the same copy-pasted code to parse
processor frequency information from /proc/cpuinfo. Let's extract that
code into a function to avoid repetition.
We now also tolerate if the parsing of /proc/cpuinfo is not successful
and just report a warning instead of bailing out and abandoning the rest
of the CPU information.
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
This new API reads host's CPU microcode version from /proc/cpuinfo.
Unfortunately, there is no other way of reading microcode version which
would be usable from both system and session daemon.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There are a few more description-related issues that commit @9026d115
forgot to address.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
There's no argument named @result, use @matches instead.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1523564
If the vhost-scsi device file cannot be found, the generic error
"error: An error occurred, but the cause is unknown"
is returned. Let's add a real error message to make it clear
why the failure occurred.
We cannot be sure someone initialized the passed *vhostfd and we
certainly don't want or need to be calling VIR_FORCE_CLOSE on what
probably is -1. So let's just return -1 immediately.
Replace the error message during startup of libvirtd with an info
message if audit_level < 2 and audit is not supported by the
kernel. Audit is not supported by the current kernel if the kernel
does not have audit compiled in or if audit is disabled (e.g. by the
kernel cmdline).
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 5e5019bf, we've no longer use
VIR_ERR_AGENT_UNSYNCED anymore.
Mark it as DEPRECATED.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The manual page clearly states that
gettid() is Linux-specific and should not be used in programs
that are intended to be portable.
Unfortunately, it looks like macOS implemented the functionality
and defined SYS_gettid accordingly, only to deprecate syscall()
altogether with 10.12 (Sierra), released last late year.
To avoid compilation errors, call gettid() on Linux only.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Some drive backends allow output of debugging information which can be
configured using properties of the image. Add fields to virStorageSource
which will allow configuring them.
Sometimes the size of the bitmap matters and it might not be guessed correctly
when parsing from some type of input. For example virBitmapNewData() has Byte
granularity, virBitmapNewString() has nibble granularity and so on.
virBitmapParseUnlimited() can be tricked into creating huge bitmap that's not
needed (e.g.: "0-2,^99999999"). This function provides a way to shrink the
bitmap. It is not supposed to free any memory.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Already introduced in the past with 9479642fd3, but then renamed to
virBitmapIntersect by a908e9e45e. This time we'll really use it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Our bitmaps can be represented as data (raw bytes for which we have
virBitmapNewData() and virBitmapToData()), human representation (list
of numbers in a string for which we have virBitmapParse() and
virBitmapFormat()) and hexadecimal string (for which we have only
virBitmapToString()). So let's add the missing complement for the
last one so that we can parse hexadecimal strings.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Truncate the output so that it is only as big as is needed to fit all
the bits, not all the units from the map. This will be needed in the
future in order to properly format bitmaps for kernel's sysfs files.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It is literally only a wrapper around virBitmapNewData() and
virBitmapFormat(), only the naming was wrong since it was introduced.
And because we have virBitmap*String functions where the meaning of
the 'String' is constant, this might confuse someone.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This follows the virBitmapToData() function and, similarly to
virBitmapNewData(), we'll be able to have virBitmapNewString() later
on without name confusion.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We can't output better memory sizes if we want to be compatible with libvirt
older than the one which introduced /memory/unit, but for new things we can just
output nicer capacity to the user if available. And this function enables that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
libvirt reports a fake NUMA topology in virConnectGetCapabilities
even if built without numactl support. The fake NUMA topology consists
of a single cell representing the host's cpu and memory resources.
Currently this is the case for ARM and s390[x] RPM builds.
A client iterating over NUMA cells obtained via virConnectGetCapabilities
and invoking virNodeGetMemoryStats on them will see an internal failure
"NUMA isn't available on this host" from virNumaGetMaxNode. An example
for such a client is VDSM.
Since the intention seems to be that libvirt always reports at least
a single cell it is necessary to return "fake" node memory statistics
matching the previously reported fake cell in case NUMA isn't supported
on the system.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
There was a recent report of the xen-xl converter not handling
config files missing an ending newline
https://www.redhat.com/archives/libvir-list/2017-October/msg01353.html
Commit 3cc2a9e0 fixed a similar problem when parsing content of a
file but missed parsing in-memory content. But AFAICT, the better
fix is to properly set the end of the content when initializing the
virConfParserCtxt in virConfParse().
This commit reverts the part of 3cc2a9e0 that appends a newline to
files missing it, and fixes setting the end of content when
initializing virConfParserCtxt. A test is also added to check
parsing in-memory content missing an ending newline.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Split on the last colon and avoid parsing port if the split remainder
contains the closing square bracket, so that IPv6 addresses are
interpreted correctly.
