Commit Graph

710 Commits

Author SHA1 Message Date
Eric Blake
d194d6e7e6 maint: use consistent if-else braces in remaining spots
I'm about to add a syntax check that enforces our documented
HACKING style of always using matching {} on if-else statements.

This patch focuses on all remaining problems, where there weren't
enough issues to warrant splitting it further.

* src/remote/remote_driver.c (doRemoteOpen): Correct use of {}.
* src/security/virt-aa-helper.c (vah_add_path, valid_path, main):
Likewise.
* src/rpc/virnetsocket.c (virNetSocketNewConnectLibSSH2):
Likewise.
* src/esx/esx_vi_types.c (esxVI_Type_FromString): Likewise.
* src/uml/uml_driver.c (umlDomainDetachDevice): Likewise.
* src/util/viralloc.c (virShrinkN): Likewise.
* src/util/virbuffer.c (virBufferURIEncodeString): Likewise.
* src/util/virdbus.c (virDBusCall): Likewise.
* src/util/virnetdev.c (virNetDevValidateConfig): Likewise.
* src/util/virnetdevvportprofile.c
(virNetDevVPortProfileGetNthParent): Likewise.
* src/util/virpci.c (virPCIDeviceIterDevices)
(virPCIDeviceWaitForCleanup)
(virPCIDeviceIsBehindSwitchLackingACS): Likewise.
* src/util/virsocketaddr.c (virSocketAddrGetNumNetmaskBits):
Likewise.
* src/util/viruri.c (virURIParseParams): Likewise.
* daemon/stream.c (daemonStreamHandleAbort): Likewise.
* tests/testutils.c (virtTestResult): Likewise.
* tests/cputest.c (cpuTestBaseline): Likewise.
* tools/virsh-domain.c (cmdDomPMSuspend): Likewise.
* tools/virsh-host.c (cmdNodeSuspend): Likewise.
* src/esx/esx_vi_generator.py (Type.generate_typefromstring):
Tweak generated code.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-09-04 14:34:03 -06:00
Wang Rui
3bd46c8174 remote: Resolve Coverity RESOURCE_LEAK
Need to free 'uri_out' on error path.

Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
2014-09-03 15:00:19 -04:00
John Ferlan
4f25146bf4 daemon: Resolve Coverity NEGATIVE_RETURNS
In each of these cases, Coverity complains that the result count returned
on error paths would be -1 disregarding that the count and the corresponding
are "linked" together (it doesn't know that).  Simple enough to check and
remove the warning
2014-08-28 08:09:32 -04:00
Peter Krempa
89a706681c remote: Implement bulk domain stats APIs in the remote driver
Implement the remote driver support for shuffling the domain stats
around.
2014-08-28 11:59:21 +02:00
Michal Privoznik
dbb4cbf532 vbox: Register per partes
Since times when vbox moved to the daemon (due to some licensing
issue) the subdrivers that vbox implements were registered, but not
opened since our generic subdrivers took priority. I've tried to fix
this in 65b7d553f3 but it was not correct. Apparently moving
vbox driver registration upfront changes the default connection URI
which makes some users sad. So, this commit breaks vbox into pieces
and register vbox's network and storage drivers first, and vbox driver
then at the end. This way, the vbox driver is registered in the order
it always was, but its subdrivers are registered prior the generic
ones.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-08-27 08:05:25 +02:00
Eric Blake
b259e459b9 API: Tweak virDomainOpenGraphics to return fd directly
Let's fix this before we bake in a painful API.  Since we know
that we have exactly one non-negative fd on success, we might
as well return the fd directly instead of forcing the user to
pass in a pointer.  Furthermore, I found some memory and fd
leaks while reviewing the code - the idea is that on success,
libvirtd will have handed two fds in two different directions:
one to qemu, and one to the RPC client.

* include/libvirt/libvirt.h.in (virDomainOpenGraphicsFD): Drop
unneeded parameter.
* src/driver.h (virDrvDomainOpenGraphicsFD): Likewise.
* src/libvirt.c (virDomainOpenGraphicsFD): Adjust interface to
return fd directly.
* daemon/remote.c (remoteDispatchDomainOpenGraphicsFd): Adjust
semantics.
* src/qemu/qemu_driver.c (qemuDomainOpenGraphicsFD): Likewise,
and plug fd leak.
* src/remote/remote_driver.c (remoteDomainOpenGraphicsFD):
Likewise, and plug memory and fd leak.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-08-26 16:36:32 -06:00
Ján Tomko
408aae3849 Add RPC implementation for virDomainOpenGraphicsFd 2014-08-26 19:26:28 +02:00
Zhou Yimin
9eac73eb84 daemon: Fix option -v missing info priority log
Introduce by 63fbcc692.

When start libvirtd with commandline "/usr/sbin/libvirtd -d -l -v",
we expect verbose(info level) log if neither environment variable
nor config file about logging controls is set. But in fact we can't
get any info priority log in the default output file.

The log priority of default output is VIR_LOG_DEFAULT(VIR_LOG_WARN),
so the info log is filtered out.
To record info priority log we must parse option -v before setting the
default output.

After this patch, we get all verbose log in the default output file.

Signed-off-by: Zhou Yimin <zhouyimin@huawei.com>
2014-08-25 16:40:20 +02:00
Martin Kletzander
1e9808d3a1 daemon: use socket activation with systemd
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-08-22 09:12:14 +02:00
Martin Kletzander
27a7081c29 daemon: support passing FDs from the calling process
First FD is the RW unix socket to listen on, second one (if
applicable) is the RO unix socket.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-08-22 09:12:13 +02:00
Michal Privoznik
65b7d553f3 daemon: Fix driver registration ordering
There are some stateless drivers which implement subdrivers
(typically vbox and its own network and storage subdrivers). However,
as of ba5f3c7c8e the vbox driver lives in the daemon, not the
client library. This means, in order for vbox (or any stateless domain
driver) to use its subdrivers, it must register before the general
drivers. Later, when the virConnectOpen function goes through the
subdrivers, stateless drivers are searched first. If the connection
request is aiming at stateless driver, it will be opened. Otherwise
the generic subdriver is opened.

The other change done in this commit is moving interface module load a
bit earlier to match the ordering in case libvirt is built without
driver modules.

Reported-by: Taowei Luo <uaedante@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-08-18 11:49:10 +02:00
Peter Krempa
c018efa863 daemon: Limit default log level to journald to VIR_LOG_INFO
Libvirt is really chatty when the DEBUG log level is enabled. When a
host uses journald we'd enable debug logging to journald when only
specifying the debug log level. As journald may employ rate throttling
this would lock up the daemon until it's able to flush all debug
messages.

This patch changes the default log level to VIR_LOG_INFO when using the
default (unconfigured) log output to journald.

To still allow debug logging to journald the user now has to explicitly
specify journald as a log output with priority 1 in the "log_outputs"
configuration option. This patch also changes the config file template
to be explicit about this change and notify the user about the possible
consequence of debug logging into journald.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1121955
2014-08-13 10:29:05 +02:00
Peter Krempa
7b6228d159 libvirtd: conf: Mention support for logging into journald
Our docs didn't mention the explicit option to log into journald.
2014-08-13 10:12:02 +02:00
Wang Rui
2381af474b daemon: Fix indentation in libvirtd.c
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
2014-08-07 11:03:31 +02:00
Peter Krempa
02bffd47bd net: merge virNetworkGetDHCPLeases and virNetworkGetDHCPLeasesForMAC
Instead of maintaining two very similar APIs, add the "@mac" parameter
to virNetworkGetDHCPLeases and kill virNetworkGetDHCPLeasesForMAC. Both
of those functions would return data the same way, so making @mac an
optional filter simplifies a lot of stuff.
2014-06-27 09:38:13 +02:00
Ján Tomko
364586d3ed Rework remoteSerializeDHCPLease
Don't leak the temporary variables on success if NULL is returned
for that field.

Don't dereference NULL on failure to allocate some of the temporaries.

Introduced by commit 990c3b6
2014-06-24 14:41:50 +02:00
Daniel P. Berrange
6512c8b456 Change 'interface' to 'iface' in virNetworkDHCPLease
Variables/fields named 'interface' clash with system
header symbols on some platforms.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-06-24 13:30:16 +01:00
Nehal J Wani
990c3b6554 net-dhcp-leases: Implement the remote protocol
Implement RPC calls for virNetworkGetDHCPLeases, virNetworkGetDHCPLeasesForMAC

daemon/remote.c
   * Define remoteSerializeNetworkDHCPLeases,
            remoteDispatchNetworkGetDHCPLeases
   * Define remoteDispatchNetworkGetDHCPLeasesForMAC
   * Define helper function remoteSerializeDHCPLease

src/remote/remote_driver.c
   * Define remoteNetworkGetDHCPLeases
   * Define remoteNetworkGetDHCPLeasesForMAC
   * Define helper function remoteSerializeDHCPLease

src/remote/remote_protocol.x
   * New RPC procedure: REMOTE_PROC_NETWORK_GET_DHCP_LEASES
   * Define structs remote_network_dhcp_leases, remote_network_get_dhcp_leases_args,
                    remote_network_get_dhcp_leases_ret
   * New RPC procedure: REMOTE_PROC_NETWORK_GET_DHCP_LEASES_FOR_MAC
   * Define structs remote_network_dhcp_leases_for_mac, remote_network_get_dhcp_leases_for_mac_args,
                    remote_network_get_dhcp_leases_for_mac_ret

src/remote_protocol-structs
   * New structs added

src/rpc/gendispatch.pl
   * Add exception (s/Dhcp/DHCP) for auto-generating names of the remote functions
     in daemon/remote_dispatch.h
2014-06-24 12:26:31 +01:00
Michal Privoznik
34f2d0319d Introduce virNodeGetFreePages
The aim of the API is to get information on number of free pages
on the system. The API behaves similar to the
virNodeGetCellsFreeMemory(). User passes starting NUMA cell, the
count of nodes that he's interested in, pages sizes (yes,
multiple sizes can be queried at once) and the counts are
returned in an array.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-06-19 15:10:49 +02:00
Eric Blake
1bfe73a126 blockjob: use stable disk string in job event
When the block job event was first added, it was for block pull,
where the active layer of the disk remains the same name.  It was
also in a day where we only cared about local files, and so we
always had a canonical absolute file name.  But two things have
changed since then: we now have network disks, where determining
a single absolute string does not really make sense; and we have
two-phase jobs (copy and active commit) where the name of the
active layer changes between the first event (ready, on the old
name) and second (complete, on the pivoted name).

Adam Litke reported that having an unstable string between events
makes life harder for clients.  Furthermore, all of our API that
operate on a particular disk of a domain accept multiple strings:
not only the absolute name of the active layer, but also the
destination device name (such as 'vda').  As this latter name is
stable, even for network sources, it serves as a better string
to supply in block job events.

But backwards-compatibility demands that we should not change the
name handed to users unless they explicitly request it.  Therefore,
this patch adds a new event, BLOCK_JOB_2 (alas, I couldn't think of
any nicer name - but at least Migrate2 and Migrate3 are precedent
for a number suffix).  We must double up on emitting both old-style
and new-style events according to what clients have registered for
(see also how IOError and IOErrorReason emits double events, but
there the difference was a larger struct rather than changed
meaning of one of the struct members).

Unfortunately, adding a new event isn't something that can easily
be broken into pieces, so the commit is rather large.

* include/libvirt/libvirt.h.in (virDomainEventID): Add a new id
for VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2.
(virConnectDomainEventBlockJobCallback): Document new semantics.
* src/conf/domain_event.c (_virDomainEventBlockJob): Rename field,
to ensure we catch all clients.
(virDomainEventBlockJobNew): Add parameter.
(virDomainEventBlockJobDispose)
(virDomainEventBlockJobNewFromObj)
(virDomainEventBlockJobNewFromDom)
(virDomainEventDispatchDefaultFunc): Adjust clients.
(virDomainEventBlockJob2NewFromObj)
(virDomainEventBlockJob2NewFromDom): New functions.
* src/conf/domain_event.h: Add new prototypes.
* src/libvirt_private.syms (domain_event.h): Export new functions.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Generate two
different events.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Likewise.
* src/remote/remote_protocol.x
(remote_domain_event_block_job_2_msg): New struct.
(REMOTE_PROC_DOMAIN_EVENT_BLOCK_JOB_2): New RPC.
* src/remote/remote_driver.c
(remoteDomainBuildEventBlockJob2): New handler.
(remoteEvents): Register new event.
* daemon/remote.c (remoteRelayDomainEventBlockJob2): New handler.
(domainEventCallbacks): Register new event.
* tools/virsh-domain.c (vshEventCallbacks): Likewise.
(vshEventBlockJobPrint): Adjust client.
* src/remote_protocol-structs: Regenerate.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-06-19 06:54:12 -06:00
Ján Tomko
819ca36e2b Don't use AI_ADDRCONFIG when binding to wildcard addresses
https://bugzilla.redhat.com/show_bug.cgi?id=1098659

With parallel boot, network addresses might not yet be assigned [1],
but binding to wildcard addresses should work.

For non-wildcard addresses, ADDRCONFIG is still used. Document this
in libvirtd.conf.

[1] http://www.freedesktop.org/wiki/Software/systemd/NetworkTarget/
2014-06-02 17:12:01 +02:00
Michal Privoznik
0abb369380 Introduce virDomain{Get,Set}Time APIs
These APIs allow users to get or set time in a domain, which may come
handy if the domain has been resumed just recently and NTP is not
configured or hasn't kicked in yet and the guest is running
something time critical. In addition, NTP may refuse to re-set the clock
if the skew is too big.

In addition, new ACL attribute is introduced 'set_time'.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-05-15 16:15:54 +02:00
Daniel P. Berrange
dd477238bc Use virFileFindResource to locate CPU map XML
Replace use of cpuMapOverride with virFileFindResource
to locate CPU map from build dir.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-04-25 11:59:46 +01:00
Daniel P. Berrange
bc2f42a094 Use virFileFindResource to locate driver plugins
Replace virDriverModuleInitialize with virFileFindResource
usage.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-04-25 11:59:46 +01:00
Daniel P. Berrange
d3c7684220 Use virFileFindResource to locate lock manager plugins
Replace virLockManagerSetPluginDir with virFileFindResource
usage.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-04-25 11:59:46 +01:00
Daniel P. Berrange
391ac4d990 Activate build dir overrides in libvirtd, virtlockd, virsh & tests
Add calls to virFileActivateDirOverride so that the build dir
overrides are activated.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-04-25 11:59:32 +01:00
Nehal J Wani
34542473e5 Fix Memory Leak in daemon/libvirtd.c
Fixes leak introduced by e562e82f

==4937== 64 bytes in 1 blocks are definitely lost in loss record 270 of 405
==4937==    at 0x4A06BE0: realloc (vg_replace_malloc.c:662)
==4937==    by 0x6FA41C4: __vasprintf_chk (vasprintf_chk.c:90)
==4937==    by 0x50C8D29: virVasprintfInternal (stdio2.h:199)
==4937==    by 0x50C8E3A: virAsprintfInternal (virstring.c:362)
==4937==    by 0x11D01A: main (libvirtd.c:1170)

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2014-04-04 07:45:41 +02:00
Ján Tomko
60555fb8ed Indent top-level labels by one space in daemon/ 2014-03-25 14:58:38 +01:00
Eric Blake
e7708a1c47 qemu: wire up RPC for qemu monitor events
These are the first async events in the qemu protocol, so this
patch looks rather big compared to most RPC additions.  However,
a large majority of this patch is just mechanical copy-and-paste
from recently-added network events.  It didn't help that this
is also the first virConnect rather than virDomain prefix
associated with a qemu-specific API.

* src/remote/qemu_protocol.x (qemu_*_domain_monitor_event_*): New
structs and RPC messages.
* src/rpc/gendispatch.pl: Adjust naming conventions.
* daemon/libvirtd.h (daemonClientPrivate): Track qemu events.
* daemon/remote.c (remoteClientFreeFunc): Likewise.
(remoteRelayDomainQemuMonitorEvent)
(qemuDispatchConnectDomainMonitorEventRegister)
(qemuDispatchConnectDomainMonitorEventDeregister): New functions.
* src/remote/remote_driver.c (qemuEvents): Handle qemu events.
(doRemoteOpen): Register for events.
(remoteNetworkBuildEventLifecycle)
(remoteConnectDomainQemuMonitorEventRegister)
(remoteConnectDomainQemuMonitorEventDeregister): New functions.
* src/qemu_protocol-structs: Regenerate.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-03-20 11:25:37 -06:00
Martin Kletzander
95aed7febc Use K&R style for curly braces in remaining files
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-03-20 17:27:17 +01:00
Jiri Denemark
be8701d76c daemon: Enhance documentation for changing NOFILE limit
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-03-20 10:55:44 +01:00
Daniel P. Berrange
c0c8c1d7bb Remove global log buffer feature entirely
A earlier commit changed the global log buffer so that it only
records messages that are explicitly requested via the log
filters setting. This removes the performance burden, and
improves the signal/noise ratio for messages in the global
buffer. At the same time though, it is somewhat pointless, since
all the recorded log messages are already going to be sent to an
explicit log output like syslog, stderr or the journal. The
global log buffer is thus just duplicating this data on stderr
upon crash.

The log_buffer_size config parameter is left in the augeas
lens to prevent breakage for users on upgrade. It is however
completely ignored hereafter.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-18 14:29:22 +00:00
Daniel P. Berrange
2835c1e730 Add virLogSource variables to all source files
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-18 14:29:22 +00:00
Daniel P. Berrange
b29275d928 Move dtrace probe macros into separate header file
The dtrace probe macros rely on the logging API. We can't make
the internal.h header include the virlog.h header though since
that'd be a circular include. Instead simply split the dtrace
probes into their own header file, since there's no compelling
reason for them to be in the main internal.h header.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-18 14:29:21 +00:00
Michal Privoznik
68f60f669c daemon: Introduce max_anonymous_clients
https://bugzilla.redhat.com/show_bug.cgi?id=992980

This config tunable allows users to determine the maximum number of
accepted but yet not authenticated users.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-03-17 17:45:13 +01:00
Michal Privoznik
4015396b2c virNetServer: Introduce unauth clients counter
The counter gets incremented on each unauthenticated client added to the
server and decremented whenever the client authenticates.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-03-17 17:37:42 +01:00
Nehal J Wani
2250a2b5d2 Add parameter to wait for lock in file locking APIs
Our current pidfile acquire APis (virPidFileAcquire) simply return -1 upon
failure to acquire a lock. This patch adds a parameter 'bool waitForLock'
which instructs the APIs if we want to make it block and wait for the lock
or not.
2014-03-17 10:04:47 -06:00
Jiri Denemark
e562e82f76 Load CPU map from builddir when run uninstalled
When libvirtd is run from a build directory without being installed, it
should not depend on files from a libvirt package installed in the
system. Not only because there may not be any libvirt installed at all.
We already do a good job for plugins but cpu_map.xml was still loaded
from the system.

The Makefile.am change is necessary to make this all work from VPATH
builds since libvirtd has no idea where to find libvirt sources. It only
knows the path from which it was started, i.e, a builddir.

https://bugzilla.redhat.com/show_bug.cgi?id=1074327
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-03-12 16:31:57 +01:00
Daniel P. Berrange
10ec072545 Add helper APIs to track if libvirtd or loadable modules have changed
The future QEMU capabilities cache needs to be able to invalidate
itself if the libvirtd binary or any loadable modules are changed
on disk. Record the 'ctime' value for these binaries and provide
helper APIs to query it. This approach assumes that if libvirt.so
is changed, then libvirtd will also change, which should usually
be the case with libtool's wrapper scripts that cause libvirtd to
get re-linked

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-11 10:51:49 +00:00
Ján Tomko
9b9d7704b5 Change file names in comments to match the files they are in
Some of these are leftovers from renaming the files, others
are just typos.

Also introduce an ugly awk script to enforce this.
2014-03-10 14:26:04 +01:00
Cédric Bosdonnat
a3e4eeff52 Make sure apparmor is started before libvirtd
If apparmor security driver is enabled in either qemu or lxc
driver configuration and libvirtd starts before AppArmor, it will fail.
2014-03-04 11:07:05 +00:00
Eric Blake
b9dd878ff8 util: make it easier to grab only regular command exit
Auditing all callers of virCommandRun and virCommandWait that
passed a non-NULL pointer for exit status turned up some
interesting observations.  Many callers were merely passing
a pointer to avoid the overall command dying, but without
caring what the exit status was - but these callers would
be better off treating a child death by signal as an abnormal
exit.  Other callers were actually acting on the status, but
not all of them remembered to filter by WIFEXITED and convert
with WEXITSTATUS; depending on the platform, this can result
in a status being reported as 256 times too big.  And among
those that correctly parse the output, it gets rather verbose.
Finally, there were the callers that explicitly checked that
the status was 0, and gave their own message, but with fewer
details than what virCommand gives for free.

So the best idea is to move the complexity out of callers and
into virCommand - by default, we return the actual exit status
already cleaned through WEXITSTATUS and treat signals as a
failed command; but the few callers that care can ask for raw
status and act on it themselves.

* src/util/vircommand.h (virCommandRawStatus): New prototype.
* src/libvirt_private.syms (util/command.h): Export it.
* docs/internals/command.html.in: Document it.
* src/util/vircommand.c (virCommandRawStatus): New function.
(virCommandWait): Adjust semantics.
* tests/commandtest.c (test1): Test it.
* daemon/remote.c (remoteDispatchAuthPolkit): Adjust callers.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Likewise.
* src/fdstream.c (virFDStreamCloseInt): Likewise.
* src/lxc/lxc_process.c (virLXCProcessStart): Likewise.
* src/qemu/qemu_command.c (qemuCreateInBridgePortWithHelper):
Likewise.
* src/xen/xen_driver.c (xenUnifiedXendProbe): Simplify.
* tests/reconnect.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* src/bhyve/bhyve_process.c (virBhyveProcessStart)
(virBhyveProcessStop): Don't overwrite virCommand error.
* src/libvirt.c (virConnectAuthGainPolkit): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetBarrierLimit)
(openvzDomainSetBarrierLimit): Likewise.
* src/util/virebtables.c (virEbTablesOnceInit): Likewise.
* src/util/viriptables.c (virIpTablesOnceInit): Likewise.
* src/util/virnetdevveth.c (virNetDevVethCreate): Fix debug
message.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Add comment.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSINodeUpdate): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-03-03 12:40:32 -07:00
Eric Blake
c72e76c3d9 util: make it easier to grab only regular process exit
Right now, a caller waiting for a child process either requires
the child to have status 0, or must use WIFEXITED() and friends
itself.  But in many cases, we want the middle ground of treating
fatal signals as an error, and directly accessing the normal exit
value without having to use WEXITSTATUS(), in order to easily
detect an expected non-zero exit status.  This adds the middle
ground to the low-level virProcessWait; the next patch will add
it to virCommand.

* src/util/virprocess.h (virProcessWait): Alter signature.
* src/util/virprocess.c (virProcessWait): Add parameter.
(virProcessRunInMountNamespace): Adjust caller.
* src/util/vircommand.c (virCommandWait): Likewise.
* src/util/virfile.c (virFileAccessibleAs): Likewise.
* src/lxc/lxc_container.c (lxcContainerHasReboot)
(lxcContainerAvailable): Likewise.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tools/virt-login-shell.c (main): Likewise.
* tools/virsh-domain.c (cmdLxcEnterNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* tests/commandtest.c (test23): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-03-03 12:40:31 -07:00
Michal Privoznik
68954fb25c virNetServerRun: Notify systemd that we're accepting clients
Systemd does not forget about the cases, where client service needs to
wait for daemon service to initialize and start accepting new clients.
Setting a dependency in client is not enough as systemd doesn't know
when the daemon has initialized itself and started accepting new
clients. However, it offers a mechanism to solve this. The daemon needs
to call a special systemd function by which the daemon tells "I'm ready
to accept new clients". This is exactly what we need with
libvirtd-guests (client) and libvirtd (daemon). So now, with this
change, libvirt-guests.service is invoked not any sooner than
libvirtd.service calls the systemd notify function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-02-24 10:54:48 +01:00
Roman Bogorodskiy
0eb4a5f4f1 bhyve: add a basic driver
At this point it has a limited functionality and is highly
experimental. Supported domain operations are:

  * define
  * start
  * destroy
  * dumpxml
  * dominfo

It's only possible to have only one disk device and only one
network, which should be of type bridge.
2014-02-19 14:21:50 +00:00
Eric Blake
6831c1d327 event: pass reason for PM events
Commit 57ddcc23 (v0.9.11) introduced the pmwakeup event, with
an optional 'reason' field reserved for possible future expansion.
But it failed to wire the field through RPC, so even if we do
add a reason in the future, we will be unable to get it back
to the user.

Worse, commit 7ba5defb (v1.0.0) repeated the same mistake with
the pmsuspend_disk event.

As long as we are adding new RPC calls, we might as well fix
the events to actually match the signature so that we don't have
to add yet another RPC in the future if we do decide to start
using the reason field.

* src/remote/remote_protocol.x
(remote_domain_event_callback_pmwakeup_msg)
(remote_domain_event_callback_pmsuspend_msg)
(remote_domain_event_callback_pmsuspend_disk_msg): Add reason
field.
* daemon/remote.c (remoteRelayDomainEventPMWakeup)
(remoteRelayDomainEventPMSuspend)
(remoteRelayDomainEventPMSuspendDisk): Pass reason to client.
* src/conf/domain_event.h (virDomainEventPMWakeupNewFromDom)
(virDomainEventPMSuspendNewFromDom)
(virDomainEventPMSuspendDiskNewFromDom): Require additional
parameter.
* src/conf/domain_event.c (virDomainEventPMClass): New class.
(virDomainEventPMDispose): New function.
(virDomainEventPMWakeupNew*, virDomainEventPMSuspendNew*)
(virDomainEventPMSuspendDiskNew*)
(virDomainEventDispatchDefaultFunc): Use new class.
* src/remote/remote_driver.c (remoteDomainBuildEvent*PM*): Pass
reason through.
* src/remote_protocol-structs: Regenerate.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-12 10:48:16 -07:00
Eric Blake
158795d20e event: convert remaining domain events to new style
Following the patterns established by lifecycle events, this
creates all the new RPC calls needed to pass callback IDs
for every domain event, and changes the limits in client and
server codes to use modern style when possible.

I've tested all combinations: both 'old client and new server'
and 'new client and old server' continue to work with the old
RPCs, and 'new client and new server' benefit from server-side
filtering with the new RPCs.

* src/remote/remote_protocol.x (REMOTE_PROC_DOMAIN_EVENT_*): Add
REMOTE_PROC_DOMAIN_EVENT_CALLBACK_* counterparts.
* daemon/remote.c (remoteRelayDomainEvent*): Send callbackID via
newer RPC when used with new-style registration.
(remoteDispatchConnectDomainEventCallbackRegisterAny): Extend to
cover all domain events.
* src/remote/remote_driver.c (remoteDomainBuildEvent*): Add new
Callback and Helper functions.
(remoteEvents): Match order of RPC numbers, register new handlers.
(remoteConnectDomainEventRegisterAny)
(remoteConnectDomainEventDeregisterAny): Extend to cover all
domain events.
* src/remote_protocol-structs: Regenerate.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-12 10:48:16 -07:00
Eric Blake
0372295770 event: server RPC protocol tweaks for domain lifecycle events
This patch adds some new RPC call numbers, but for ease of review,
they sit idle until a later patch adds the client counterpart to
drive the new RPCs.  Also for ease of review, I limited this patch
to just the lifecycle event; although converting the remaining
15 domain events will be quite mechanical.  On the server side,
we have to have a function per RPC call, largely with duplicated
bodies (the key difference being that we store in our callback
opaque pointer whether events should be fired with old or new
style); meanwhile, a single function can drive multiple RPC
messages.  With a strategic choice of XDR struct layout, we can
make the event generation code for both styles fairly compact.

I debated about adding a tri-state witness variable per
connection (values 'unknown', 'legacy', 'modern').  It would start
as 'unknown', move to 'legacy' if any RPC call is made to a legacy
event call, and move to 'modern' if the feature probe is made;
then the event code could issue an error if the witness state is
incorrect (a legacy RPC call while in 'modern', a modern RPC call
while in 'unknown' or 'legacy', and a feature probe while in
'legacy' or 'modern').  But while it might prevent odd behavior
caused by protocol fuzzing, I don't see that it would prevent
any security holes, so I considered it bloat.

Note that sticking @acl markers on the new RPCs generates unused
functions in access/viraccessapicheck.c, because there is no new
API call that needs to use the new checks; however, having a
consistent .x file is worth the dead code.

* src/libvirt_internal.h (VIR_DRV_FEATURE_REMOTE_EVENT_CALLBACK):
New feature.
* src/remote/remote_protocol.x
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_CALLBACK_REGISTER_ANY)
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_CALLBACK_DEREGISTER_ANY)
(REMOTE_PROC_DOMAIN_EVENT_CALLBACK_LIFECYCLE): New RPCs.
* daemon/remote.c (daemonClientCallback): Add field.
(remoteDispatchConnectDomainEventCallbackRegisterAny)
(remoteDispatchConnectDomainEventCallbackDeregisterAny): New
functions.
(remoteDispatchConnectDomainEventRegisterAny)
(remoteDispatchConnectDomainEventDeregisterAny): Mark legacy use.
(remoteRelayDomainEventLifecycle): Change message based on legacy
or new use.
(remoteDispatchConnectSupportsFeature): Advertise new feature.
* src/remote_protocol-structs: Regenerate.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-12 10:48:15 -07:00
Eric Blake
047fd2e83e event: dynamically manage server-side RPC domain events
This patch continues the earlier conversion made for network
events, with a goal of introducing server-side event filtering
in a later patch.  Actual behavior is unchanged without
further RPC changes.

* daemon/libvirtd.h (daemonClientPrivate): Alter the tracking of
domain events.
* daemon/remote.c (remoteClientInitHook, remoteClientFreeFunc)
(remoteRelayDomainEvent*)
(remoteDispatchConnectDomainEventRegister)
(remoteDispatchConnectDomainEventRegisterAny): Track domain
callbacks dynamically.
2014-02-12 10:48:15 -07:00
Eric Blake
f34ea654de maint: fix grammar in conf file
Noticed a misuse of 'to' while testing my event regression under
polkit ACLs, and decided to review the entire conf files for
other legibility bugs.

* daemon/libvirtd.conf: Use correct grammar.
* src/qemu/qemu.conf: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-05 10:40:14 -07:00