We already have virAsprintf, so picking a similar name helps for
seeing a similar purpose. Furthermore, the prefix V before printf
generally implies 'va_list', even though this variant was '...', and
the old name got in the way of adding a new va_list version.
global rename performed with:
$ git grep -l virBufferVSprintf \
| xargs -L1 sed -i 's/virBufferVSprintf/virBufferAsprintf/g'
then revert the changes in ChangeLog-old.
We're seeing bugs apparently resulting from thread unsafety of
libpciaccess, such as
https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/726099
To prevent those, as suggested by danpb on irc, move the
nodeDeviceLock(driverState) higher into the callers. In
particular:
udevDeviceMonitorStartup should hold the lock while calling
udevEnumerateDevices(), and udevEventHandleCallback should hold it
over its entire execution.
It's not clear to me whether it is ok to hold the
nodeDeviceLock while taking the virNodeDeviceObjLock(dev) on a
device. If not, then the lock will need to be dropped around
the calling of udevSetupSystemDev(), and udevAddOneDevice()
may not actually be safe to call from higher layers with the
driverstate lock held.
libvirt 0.8.8 with this patch on it seems to work fine for me.
Assuming it looks ok and I haven't done anything obviously dumb,
I'll ask the bug submitters to try this patch.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Even with -Wuninitialized (which is part of autobuild.sh
--enable-compile-warnings=error), gcc does NOT catch this
use of an uninitialized variable:
{
if (cond)
goto error;
int a = 1;
error:
printf("%d", a);
}
which prints 0 (supposing the stack started life wiped) if
cond was true. Clang will catch it, but we don't use clang
as often. Using gcc -Wjump-misses-init catches it, but also
gives false positives:
{
if (cond)
goto error;
int a = 1;
return a;
error:
return 0;
}
Here, a was never used in the scope of the error block, so
declaring it after goto is technically fine (and clang agrees).
However, given that our HACKING already documents a preference
to C89 decl-before-statement, the false positive warning is
enough of a prod to comply with HACKING.
[Personally, I'd _really_ rather use C99 decl-after-statement
to minimize scope, but until gcc can efficiently and reliably
catch scoping and uninitialized usage bugs, I'll settle with
the compromise of enforcing a coding standard that happens to
reject false positives if it can also detect real bugs.]
* acinclude.m4 (LIBVIRT_COMPILE_WARNINGS): Add -Wjump-misses-init.
* src/util/util.c (__virExec): Adjust offenders.
* src/conf/domain_conf.c (virDomainTimerDefParseXML): Likewise.
* src/remote/remote_driver.c (doRemoteOpen): Likewise.
* src/phyp/phyp_driver.c (phypGetLparNAME, phypGetLparProfile)
(phypGetVIOSFreeSCSIAdapter, phypVolumeGetKey)
(phypGetStoragePoolDevice)
(phypVolumeGetPhysicalVolumeByStoragePool)
(phypVolumeGetPath): Likewise.
* src/vbox/vbox_tmpl.c (vboxNetworkUndefineDestroy)
(vboxNetworkCreate, vboxNetworkDumpXML)
(vboxNetworkDefineCreateXML): Likewise.
* src/xenapi/xenapi_driver.c (getCapsObject)
(xenapiDomainDumpXML): Likewise.
* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
* src/security/security_selinux.c (SELinuxGenNewContext):
Likewise.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia):
Likewise.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Likewise.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetPtyPaths):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainShutdown)
(qemudDomainBlockStats, qemudDomainMemoryPeek): Likewise.
* src/storage/storage_backend_iscsi.c
(virStorageBackendCreateIfaceIQN): Likewise.
* src/node_device/node_device_udev.c (udevProcessPCI): Likewise.
https://bugzilla.redhat.com/show_bug.cgi?id=684655 points out
a regression introduced in commit 2215050edd - non-root users
can't connect to qemu:///session because libvirtd dies when
it can't use pciaccess initialization.
* src/node_device/node_device_udev.c (udevDeviceMonitorStartup):
Don't abort udev driver (and libvirtd overall) if non-root user
can't use pciaccess.
Done mechanically with:
$ git grep -l '\bDEBUG0\? *(' | xargs -L1 sed -i 's/\bDEBUG0\? *(/VIR_&/'
followed by manual deletion of qemudDebug in daemon/libvirtd.c, along
with a single 'make syntax-check' fallout in the same file, and the
actual deletion in src/util/logging.h.
* src/util/logging.h (DEBUG, DEBUG0): Delete.
* daemon/libvirtd.h (qemudDebug): Likewise.
* global: Change remaining clients over to VIR_DEBUG counterpart.
Most of te VIR_INFO calls in the udev driver are only relevant
to developers so can switch to VIR_DEBUG. Failure to initialize
libpciaccess though is a fatal error
* src/node_device/node_device_udev.c: Adjust log levels
The Linux kernel headers don't have a value for SCSI type 12,
but HAL source code shows this to be a 'raid'. Add workaround
for this type. Lower log level for unknown types since
this is not a fatal error condition. Include the device sysfs
path in the log output to allow identification of which device
has problems.
* src/node_device/node_device_udev.c: Add SCSI RAID type
libpciaccess has many bugs in its pci_system_init/cleanup
functions that makes calling them multiple times unwise.
eg it will double close() FDs, and leak other FDs.
* src/node_device/node_device_udev.c: Only initialize
libpciaccess once
The udev driver does not update a PCI device with its SR-IOV capabilities,
when applicable, the way the hal driver does. As a result, dumping the
device's XML will not include the relevant physical or virtual function
information.
With this patch, the XML is correct:
# virsh nodedev-dumpxml pci_0000_09_00_0
<device>
<name>pci_0000_09_00_0</name>
<parent>pci_0000_00_1c_0</parent>
<driver>
<name>vxge</name>
</driver>
<capability type='pci'>
<domain>0</domain>
<bus>9</bus>
<slot>0</slot>
<function>0</function>
<product id='0x5833'>X3100 Series 10 Gigabit Ethernet PCIe</product>
<vendor id='0x17d5'>Neterion Inc.</vendor>
<capability type='virt_functions'>
<address domain='0x0000' bus='0x0a' slot='0x00' function='0x1'/>
<address domain='0x0000' bus='0x0a' slot='0x00' function='0x2'/>
<address domain='0x0000' bus='0x0a' slot='0x00' function='0x3'/>
</capability>
</capability>
</device>
# virsh nodedev-dumpxml pci_0000_0a_00_1
<device>
<name>pci_0000_0a_00_1</name>
<parent>pci_0000_00_1c_0</parent>
<driver>
<name>vxge</name>
</driver>
<capability type='pci'>
<domain>0</domain>
<bus>10</bus>
<slot>0</slot>
<function>1</function>
<product id='0x5833'>X3100 Series 10 Gigabit Ethernet PCIe</product>
<vendor id='0x17d5'>Neterion Inc.</vendor>
<capability type='phys_function'>
<address domain='0x0000' bus='0x09' slot='0x00' function='0x0'/>
</capability>
</capability>
</device>
Cc: Dave Allan <dallan@redhat.com>
Signed-off-by: Chris Wright <chrisw@redhat.com>
This patch adds a mode_t parameter to virFileWriteStr().
If mode is different from 0, virFileWriteStr() will try
to create the file if it doesn't exist.
* src/util/util.h (virFileWriteStr): Alter signature.
* src/util/util.c (virFileWriteStr): Allow file creation.
* src/network/bridge_driver.c (networkEnableIpForwarding)
(networkDisableIPV6): Adjust clients.
* src/node_device/node_device_driver.c
(nodeDeviceVportCreateDelete): Likewise.
* src/util/cgroup.c (virCgroupSetValueStr): Likewise.
* src/util/pci.c (pciBindDeviceToStub, pciUnBindDeviceFromStub):
Likewise.
Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.
node_device/node_device_driver.c: In function 'nodeDeviceVportCreateDelete':
node_device/node_device_driver.c:423: error: implicit declaration of function 'stat' [-Wimplicit-function-declaration]
* src/node_device/node_device_driver.c (includes): Add <sys/stat.h>.
Some kernels, such as the one used in RHEL-5, have vport_create and
vport_delete operation files in /sys/class/scsi_host/hostN directory
instead of /sys/class/fc_host/hostN. Let's check both paths for
compatibility reasons.
This also removes unnecessary '/' characters from sysfs paths containing
LINUX_SYSFS_FC_HOST_PREFIX.
We only use libpciaccess for resolving device product/vendor. If
initializing the library fails (say if using qemu:///session), don't
warn so loudly, and carry on as usual.
* This patch is a modification of a patch submitted by Nigel Jones.
It fixes several memory leaks on device addition/removal:
1. Free the virNodeDeviceDefPtr in udevAddOneDevice if the return
value is non-zero
2. Always release the node device reference after the device has been
processed.
* Refactored for better readability per the suggestion of clalance
HAL is deprecated and UDEV is the future. Thus if both
options are compiled, we should prefer use of UDEV over
HAL
* src/node_device/node_device_driver.c: Switch init
order to try UDEV first, then HAL
* It appears that the udev event for HBA creation arrives before the
associated sysfs data is fully populated, resulting in bogus data
for the nodedev entry until the entry is refreshed. This problem is
particularly troublesome when creating NPIV vHBAs because it results
in libvirt failing to find the newly created adapter and waiting for
the full timeout period before erroneously failing the create
operation. This patch forces an update before any attempt to use
any scsi_host nodedev entry.
* If a nodedev has a parent that we don't want to display, we should
continue walking up the udev device tree to see if any of its
earlier ancestors are devices that we display. It makes the tree
much nicer looking than having a whole lot of devices hanging off
the root node.
* Incorporated Jim's feedback (v1 & v2)
* Moved case of DEVTYPE == "wlan" up as it's definitive that we have a network interface.
* Made comment more detailed about the wired case to explain better
how it differentiates between wired network interfaces and USB
devices.
Allow for a host UUID in the capabilities XML. Local drivers
will initialize this from the SMBIOS data. If a sanity check
shows SMBIOS uuid is invalid, allow an override from the
libvirtd.conf configuration file
* daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid
configuration option
* docs/schemas/capability.rng: Add optional host uuid field
* src/conf/capabilities.c, src/conf/capabilities.h: Include
host UUID in XML
* src/libvirt_private.syms: Export new uuid.h functions
* src/lxc/lxc_conf.c, src/qemu/qemu_driver.c,
src/uml/uml_conf.c: Set host UUID in capabilities
* src/util/uuid.c, src/util/uuid.h: Support for host UUIDs
* src/node_device/node_device_udev.c: Use the host UUID functions
* tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add
new host_uuid config option to test
We were over-writing a pointer without freeing it in
case of a disk device, leading to a memory leak.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
All other uses of get_str_prop in this file that ignored
failure explicitly cast to void.
* src/node_device/node_device_hal.c (dev_create): Silence coverity
warning.
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match
The original udev node device backend neglected to lock the driverState
struct containing the device list when adding and removing devices
* src/node_device/node_device_udev.c: add necessary locks in
udevRemoveOneDevice() and udevAddOneDevice()
udevGetUintProperty was called with base set to 0 for busnum and devnum.
With base 0 strtoul parses the number as octal if it start with a 0. But
busnum and devnum are decimal and udev returns them padded with leading
zeros. So strtoul parses them as octal. This works for certain decimal
values like 001-007, but fails for values like 008.
Change udevProcessUSBDevice to use base 10 for busnum and devnum.
it causes a NULL-dereference on some systems like Solaris 10.
* src/node_device/node_device_linux_sysfs.c. Include <stdlib.h>.
(get_sriov_function): Use canonicalize_file_name, not realpath.
* bootstrap (modules): Add canonicalize-lgpl.
This fixes a segfault when the event handler is called after shutdown
when the global driver state is NULL again.
Also fix a locking issue in an error path.
