Commit Graph

17 Commits

Author SHA1 Message Date
Pavel Hrdina
b33c14b342 graphics: make address attribute for listen type='address' optional
We support omitting listen attribute of graphics element so we should
also support omitting address attribute of listen element.  This patch
also updates libvirt to always add a listen element into domain XML
except for VNC graphics if socket attribute is specified.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-05-17 10:41:45 +02:00
Ján Tomko
96b21fb0ec Fix tests to include video ram size
My commit 3e42867 started filling out the video size in post-parse,
but did not adjust the tests.
2016-05-12 14:32:17 +02:00
Ján Tomko
4b35a7155a tests: fix xen-related tests
My commit 6879be4 moved the addition of the implicit video device
from the XML parser to the PostParse function, but did not regenerate
all the tests.
2016-04-12 14:58:43 +02:00
Cole Robinson
4066c73428 domain: add implicit controllers from post parse
Seems like the natural fit, since we are already adding other XML bits
in the PostParse routine.

Previously AddImplicitControllers was only called at the end of XML
parsing, meaning code that builds a DomainDef by hand had to manually
call it. Now those PostParse callers get it for free.

There's some test churn here; xen xm and sexpr test suite bits weren't
calling this before, but now they are, so you'll see new IDE controllers.
I don't think this will cause problems in practice, since the code already
needs to handle these implicit controllers like in the case when a user
defines their own XML.
2016-02-19 09:45:23 -05:00
Jim Fehlig
87dce7a762 Xen: tests: use latest XEND_CONFIG_VERSION in sexpr2xml tests
Change all sexpr2xml tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:33 -07:00
Pavel Hrdina
91a00424db xen: use virDomainDefPostParse for parsing XM/XL/SEXPR cofings
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-12-09 12:59:21 +01:00
Michal Privoznik
68bf13dbef conf: Extend <loader/> and introduce <nvram/>
Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.

Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files

The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-09-10 09:38:07 +02:00
Jiri Denemark
546154e3d4 conf: Format and parse backing chains in domain XML
This patch implements formating and parsing code for the backing store
schema defined and documented by the previous patch.

This patch does not aim at providing full persistent storage of disk
backing chains yet. The formatter is supposed to provide the backing
chain detected when starting a domain and thus it is not formatted into
an inactive domain XML. The parser is implemented mainly for the purpose
of testing the XML generated by the formatter and thus it does not
distinguish between no backingStore element and an empty backingStore
element. This will have to change once we fully implement support for
user-supplied backing chains.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-04-24 16:06:18 +02:00
Li Zhang
bc18373391 conf: Add keyboard input device type
There is no keyboard support currently in libvirt.

For some platforms (PPC64 QEMU) this makes graphics unusable,
since the keyboard is not implicit and it can't be added via libvirt.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2014-02-19 09:16:31 +01:00
Osier Yang
d70f2e117a numad: Always output 'placement' of <vcpu>
<vcpu> is not an optional node. The value for its 'placement'
actually always defaults to 'static' in the underlying codes.
(Even no 'cpuset' and 'placement' is specified, the domain
process will be pinned to all the available pCPUs).
2012-05-08 16:57:37 -06:00
Philipp Hahn
11ec6bd891 Xen: Fix <clock> handling
XenD-3.1 introduced managed domains. HV-domains have rtc_timeoffset
(hgd24f37b31030 from 2007-04-03), which tracks the offset between the
hypervisors clock and the domains RTC, and is persisted by XenD.
In combination with localtime=1 this had a bug until XenD-3.4
(hg5d701be7c37b from 2009-04-01) (I'm not 100% sure how that bug
manifests, but at least for me in TZ=Europe/Berlin I see the previous
offset relative to utc being applied to localtime again, which manifests
in an extra hour being added)

XenD implements the following variants for clock/@offset:
- PV domains don't have a RTC → 'localtime' | 'utc'
- <3.1: no managed domains → 'localtime' | 'utc'
- ≥3.1: the offset is tracked for HV → 'variable'
        due to the localtime=1 bug → 'localtime' | 'utc'
- ≥3.4: the offset is tracked for HV → 'variable'

Current libvirtd still thinks XenD only implements <clock offset='utc'/>
and <clock offset='localtime'/>, which is wrong, since the semantic of
'utc' and 'localtime' specifies, that the offset will be reset on
domain-restart, while with 'variable' the offset is kept. (keeping the
offset over "virsh edit" is important, since otherwise the clock might
jump, which confuses certain guest OSs)

xendConfigVersion was last incremented to 4 by the xen-folks for
xen-3.1.0. I know of no way to reliably detect the version of XenD
(user space tools), which may be different from the version of the
hypervisor (kernel) version! Because of this only the change from
'utc'/'localtime' to 'variable' in XenD-3.1 is handled, not the buggy
behaviour of XenD-3.1 until XenD-3.4.

For backward compatibility with previous versions of libvirt Xen-HV
still accepts 'utc' and 'localtime', but they are returned as 'variable'
on the next read-back from Xend to libvirt, since this is what XenD
implements: The RTC is NOT reset back to the specified time on next
restart, but the previous offset is kept.
This behaviour can be turned off by adding the additional attribute
adjustment='reset', in which case libvirt will report an error instead
of doing the conversion. The attribute can also be used as a shortcut to
offset='variable' with basis='...'.

With these changes, it is also necessary to adjust the xen tests:

"localtime = 0" is always inserted, because otherwise on updates the
value is not changed within XenD.

adjustment='reset' is inserted for all cases, since they're all <
XEND_CONFIG_VERSION_3_1_0, only 3.1 introduced persistent
rtc_timeoffset.

Some statements change their order because code was moved around.

Signed-off-by: Philipp Hahn <hahn@univention.de>
2012-04-02 09:33:54 -06:00
Eric Blake
265457845f xml: output memory unit for clarity
Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.

Tests were updated via:

$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"

followed by a few fixes for the stragglers.

Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.

* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
2012-03-07 18:24:43 -07:00
Cole Robinson
6b24755235 domain conf: Track <console> target type
All <console> devices now export a <target> type attribute. QEMU defaults
to 'serial', UML defaults to 'uml, xen can be either 'serial' or 'xen'
depending on fullvirt. Understandably there is lots of test fallout.

This will be used to differentiate between a serial vs. virtio console for
QEMU.

Signed-off-by: Cole Robinson <crobinso@redhat.com>
2010-07-28 16:47:59 -04:00
John Levon
fb4ec82358 Support script for bridge interface type 2009-01-22 18:29:13 +00:00
Daniel P. Berrange
31ac8125b8 Convert XenD SEXPR->XML convesion to new domain XML APIs 2008-07-25 10:49:33 +00:00
Daniel P. Berrange
021bd31706 Added disk target bus type to Xen driver 2008-05-08 14:41:56 +00:00
Daniel P. Berrange
e6f1123819 Added full support for serial and parallel devices to Xen drivers 2008-04-26 14:22:02 +00:00