Remove the conversion from virPCIVirtualFunctionList which encapsulates
the list of virtual functions to two disjunct arrays.
This greatly simplifies the fetching of the parameters as well as
cleanup in the caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virNetDevGetVirtualFunctions' calls 'virPCIGetVirtualFunctions' and
then re-iterates the returned list to fetch the interface names for the
returned virtual functions.
If we move the fetching of the interface name into
virPCIGetVirtualFunctions we can simplify the code and remove a bunch of
impossible error states.
To accomplish this the function is renamed to
'virPCIGetVirtualFunctionsFull' while keeping a wrapper with original
name and if the physical port ID is passed the interface name is fetched
too without the need to re-convert the address into a sysfs link.
For now 'virNetDevGetVirtualFunctions' still converts the returned data
into two lists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a struct for holding the list of VFs returned by
virPCIGetVirtualFunctions so that we can employ automatic memory
clearing and also allow querying more information at once.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We currently query the host MSRs to determine if TSC scaling is
supported. This works OK when running privileged and can open
the /dev/cpu/0/msr. When unprivileged we fallback to querying
MSRs from /dev/kvm. This is incorrect because /dev/kvm only
reports accurate info for MSRs that are valid to use from inside
a guest. The TSC scaling support MSR is not, thus we always end
up reporting lack of TSC scaling when unprivileged.
The solution to this is easy, because KVM can directly report
whether TSC scaling is available, which matches what QEMU will
do at startup.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/188
Reported-by: Roman Mohr <rmohr@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
VIR_APPEND_ELEMENT doesn't report any errors now so we can remove
VIR_APPEND_ELEMENT_QUIET and replace all uses by VIR_APPEND_ELEMENT
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now it was an alias to VIR_APPEND_ELEMENT. Use virAppendElement
directly until VIR_APPEND_ELEMENT is refactored too and we'll be able to
get rid of VIR_APPEND_ELEMENT_QUIET completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT_COPY which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
VIR_APPEND_ELEMENT_INPLACE and VIR_APPEND_ELEMENT_COPY_INPLACE already
ignore the return value from 'virInsertElementsN' which allows a trivial
conversion to virAppendElement without the need for 'ignore_value'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The new wrapper calls virInsertElementInternal with the appropriate
arguments without any checks which are unnecessary for appension. This
allows to have no return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Split out the code doing the movement of the elements and insertion from
the range checks. This will help in adding an error-free version for
appension.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The idea of @add was that the insersion/appension macros would allow
adding more than one element but this feature was never implemented.
'add' is nowadays used as a dummy variable consuming the result of the
VIR_TYPEMATCH compile time check.
Make it obvious that we don't use 'add' by renaming it to
'typematchDummy', marking it as unused and replacing all occurences
where the value was used by literal '1'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a version of virPidFileForceCleanupPath that takes
a 'group' bool argument and propagate it all the way
down to virProcessKillPainfullyDelay.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When loop in function virNVMeDeviceListCreateReAttachList() there may be
reused index @i, this patch fix this by using a new @j.
Signed-off-by: Jia Zhou <zhou.jia2@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add helper function virHostCPUGetHaltPollTime to obtain halt polling
time. If the kernel support halt polling time statistic, and mount
debugfs. This function will take effect on KVM VMs.
Signed-off-by: Yang Fei <yangfei85@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use function virFileReadValueUllongQuiet to read unsigned long
long value without error report.
Signed-off-by: Yang Fei <yangfei85@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Declare the function with G_GNUC_WARN_UNUSED_RESULT as we always want to
use the returned value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In one of my previous patches I've tried to postpone dropping
CAP_SETPCAP until the very end because it's needed for
capng_apply(). What I did not realize back then was that we might
not have the capability to begin with. Because of unknown reasons
capng_apply() pollutes logs only for CAPNG_SELECT_BOUNDS and not
for CAPNG_SELECT_CAPS.
Reproducer is really simple: run libvirtd as a regular user.
During its initialization, libvirtd will spawn some binaries
(dnsmasq, qemu-*, etc.) and while doing so it will try to drop
capabilities.
Anyway, let's call capng_apply(CAPNG_SELECT_BOUNDS) only if we
have the CAP_SETPCAP (which is tracked in need_setpcap variable).
Fixes: 438b50dda8a863fdc988e9ab612f097cc1626e8a
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1924218
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
After all capabilities were set (except for CAP_SETGID,
CAP_SETUID and CAP_SETPCAP) and after UID:GID was changed we drop
the last aforementioned capabilities (we couldn't drop them
before because we needed UID:GID and capabilities change).
Therefore, there's final capng_apply() call. However, it is
wrapped in one layer of parenthesis more than needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the function is called with maxlen equal to `INT_MAX`, adding
one will trigger a signed integer overflow.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This appears to be a copy-paste mistake from the check directly above.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On libvirtd startup, the list of priority worker threads is uninitialized
(`pool->prioWorkers` is NULL), and then "expanded" to zero (`prioWorkers`)
entries.
This causes `virThreadPoolExpand` to call `VIR_EXPAND_N` on a null pointer
and an increment of zero. The zero increment triggers `virReallocN` to not
actually allocate any memory and leave the pointer NULL, which, eventually,
causes `memset(NULL, 0, 0)` to be called in `virExpandN`.
`memset` is declared `__attribute__ ((__nonnull__ 1))`, which triggers the
following warning when libvirt is compiled with address sanitizing enabled:
$ meson -Dbuildtype=debug -Db_lundef=false -Db_sanitize=address,undefined
build && ninja -C build
$ ./build/run build/src/libvirtd
src/util/viralloc.c:82:5: runtime error: null pointer passed as
argument 1, which is declared to never be null
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was bothering someone as the debug message looked like there was an issue
despite it being just a debug message. Change it to what is actually happening
and why the name is being skipped.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We have an example in virDirRead() documentation on how to use
the function. In there, the directory structure is plain DIR, but
that won't work anymore. Switch over to g_autoptr(DIR) which is
what we use now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce qos setting and cleaning method. Use ovs command to set qos
parameters on specific interface of qemu virtual machine.
When an ovs port is created, we add 'ifname' to external-ids. When setting
qos on an ovs port, query its qos and queue. If found, change qos on queried
queue and qos, otherwise create new queue and qos. When cleaning qos, query
and clean queues and qos in ovs table record by 'ifname' and 'vmid'.
Signed-off-by: Jinsheng Zhang <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It all started as a simple bug: trying to move domain memory
between NUMA nodes (e.g. via virsh numatune) did not work. I've
traced the problem to qemuProcessHook() because that's where we
decide whether to rely on CGroups or use numactl APIs to satisfy
<numatune/>. The problem was that virCgroupControllerAvailable()
was telling us that cpuset controller is unavailable. This is
CGroupsV2, and pretty weird because CGroupsV2 definitely do
support cpuset controller and I had them mounted in a standard
way. What I found out (with Pavel's help) was that
virCgroupNewSelf() was looking into the following path to detect
supported controllers:
/sys/fs/cgroup/system.slice/cgroup.controllers
However, if there's no other VM running then the system.slice
only has 'memory' and 'pids' controllers. Therefore, we saw
'cpuset' as not available. The fix is to look at the top most
path, which has the full set of controllers:
/sys/fs/cgroup/cgroup.controllers
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1976690
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In 'virResctrlAllocUpdateMask', mask is updated only if 'previous mask' is NULL.
By default, the bitmask for a cache resource for a VM is initialized with
'default-resctrl-group' bitmask. So the 'previous mask' would not be NULL and
mask won't get updated if cachetune is configured for a VM. This causes libvirt
to use same bitmask as 'default-resctrl-group' bitmask for a cache resource for
a VM. This patch fixes the issue.
Fixes: d8a354954aba9cd45ab0317915a0a2be27c04767
Signed-off-by: Vinayak Kale <vkale@nvidia.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Bounding set capabilities were introduced in kernel commit of
v2.6.25-rc1~912. I guess it is safe to assume that all Linux
hosts we ran on have at least that version or newer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
