For the actions ADD and OLD, split out creating the new lease object,
as well as getting the environment variables that do not affect
the parsing of command line arguments.
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce virLeaseReadCustomLeaseFile which will populate
the new leases array with all the leases, except for expired
ones and the ones matching 'ip_to_delete'.
This removes five variables from main().
We either use the value from the environment variable, or learn it from
the existing lease file.
In the second case, the pointer would be pointing into the JSON object
of the first lease with a DUID, owned by leases_array, then
leases_array_new.
Always allocate the string instead, making obvious who should free the
string.
If dnsmasq specified DNSMASQ_IAID (so we're dealing with an IPv6
lease) but no DNSMASQ_MAC, we skip creation of the new lease object.
Also skip adding it to the leases array.
https://bugzilla.redhat.com/show_bug.cgi?id=1202350
Instead of comparing garbage strings against real MAC addresses,
introduce an error mesage for unparsable ones:
$ virsh net-dhcp-leases default --mac t12
error: Failed to get leases info for default
error: invalid MAC address: t12
https://bugzilla.redhat.com/show_bug.cgi?id=1261432
A PCI device may have the capability to setup virtual functions (VFs)
but have them currently all disabled. Prior to this patch, if that was
the case the the node device XML for the device wouldn't report any
virtual_functions capability.
With this patch, if a file called "sriov_totalvfs" is found in the
device's sysfs directory, its contents will be interpreted as a
decimal number, and that value will be reported as "maxCount" in a
capability element of the device's XML, e.g.:
<capability type='virtual_functions' maxCount='7'/>
This will be reported regardless of whether or not any VFs are
currently enabled for the device.
NB: sriov_numvfs (the number of VFs currently active) is also
available in sysfs, but that value is implied by the number of items
in the list that is inside the capability element, so there is no
reason to explicitly provide it as an attribute.
sriov_totalvfs and sriov_numvfs are available in kernels at least as far
back as the 2.6.32 that is in RHEL6.7, but in the case that they
simply aren't there, libvirt will behave as it did prior to this patch
- no maxCount will be displayed, and the virtual_functions capability
will be absent from the device's XML when 0 VFs are enabled.
commit db488c79 assumed that dnsmasq would complete IPv6 DAD before
daemonizing, but in reality it doesn't wait, which creates problems
when libvirt's bridge driver sets the matching "dummy tap device" to
IFF_DOWN prior to DAD completing.
This patch waits for DAD completion by periodically polling the kernel
using netlink to check whether there are any IPv6 addresses assigned
to bridge which have a 'tentative' state (if there are any in this
state, then DAD hasn't yet finished). After DAD is finished, execution
continues. To avoid an endless hang in case something was wrong with
the kernel's DAD, we wait a maximum of 5 seconds.
The internal representation of a JSON array counts the items in
size_t. However, for some reason, when asking for the count it's
reported as int. Firstly, we need the function to return a signed
type as it's returning -1 on an error. But, not every system has
integer the same size as size_t. Therefore, lets return ssize_t.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's a check right at the beginning of the function that
shortcuts if the function was called over all NULL arguments.
However, this was meant just as a fool-proof check so that we
don't crash if function is used in a bad manner. Anyway, it makes
Coverity unhappy as it then thinks any of the arguments could be
NULL. Well, with the current state of the code it can't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It may happen that an interface don't have any bandwidth set and
a new one is to be set. In that case, @ifaceBand will be NULL.
This will cause troubles later in the code when deciding what to
do.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So, if a domain vNIC's bandwidth has been successfully set, it's
possible that because @floor is set on network's bridge, this
part may need updating too. And that's exactly what this function
does. While the previous commit introduced a function to check if
@floor can be satisfied, this does all the hard work. In general,
there may be three, well four possibilities:
1) No change in @floor value (either it remain unset, or its
value hasn't changed)
2) The @floor value has changed from a non-zero to a non-zero
value
3) New @floor is to be set
4) Old @floor must be cleared out
The difference between 2), 3) and 4) is, that while in 2) the QoS
tree on the network's bridge already has a special class for the
vNIC, in 3) the class must be created from scratch. In 4) it must
be removed. Fortunately, we have helpers for all three
interesting cases.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When a domain vNIC's bandwidth is to be changed (at runtime) it is
possible that guaranteed minimal bandwidth (@floor) will change too.
Well, so far it is, because we still don't have an implementation that
allows setting it dynamically, so it's effectively erased on:
#virsh domiftune $dom vnet0 --inbound 0
However, that's slightly unfortunate. We do some checks on domain
startup to see if @floor can be guaranteed. We ought do the same if
QoS is changed at runtime.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is no functional change. It's just that later in the series we
will need to pass class_id as an integer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The comment above that function says: "This function can be a lot more
exhaustive, ...", so let's be.
Check for collisions between routes in the system and static routes
being added explicitly from the <route/> element of the network XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1094205
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There are now many more reasons that virSocketAddrGetRange() could
fail, so it is much more informative to report the error there instead
of in the caller. (one of the two callers was previously assuming
success, which is almost surely safe based on the parsing that has
already happened to the config by that time, but it still is nicer to
account for an error "just in case")
Part of fix for: https://bugzilla.redhat.com/show_bug.cgi?id=985653
This loop had automatic variable definitions mixed with code. This
patch moves the definitions to the top of the function and puts
cleanup for them at the bottom. No functional change.
Part of fix for: https://bugzilla.redhat.com/show_bug.cgi?id=985653
virSocketAddrGetRange() has been updated to take the network address
and prefix, and now checks that both the start and end of the range
are within that network, thus validating that the entire range of
addresses is in the network. For IPv4, it also checks that ranges to
not start with the "network address" of the subnet, nor end with the
broadcast address of the subnet (this check doesn't apply to IPv6,
since IPv6 doesn't have a broadcast or network address)
Negative tests have been added to the network update and socket tests
to verify that bad ranges properly generate an error.
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=985653
To silence Coverity just add a 'p &&' in front of the check in
networkFindUnusedBridgeName after the strchr() call. Even though
we know it's not possible to have strchr return NULL since the only
way into the function is if there is a '%' in def->bridge or it's NULL.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In order not to bring in any link dependencies, bridge driver doesn't
use the usual stubs as other conditionally-built code does. However,
having the function as a macro imposes a problem with possibly unused
variables if just defined as "0". This was worked around by using
(dom=dom, iface=iface, 0) which should act like a 0 if used in a
condition. However, gcc still bugs about that, so I came up with
another way how to fix that.
Using static inline functions in the header won't collide with anything,
it fixes the bug and does one thing that the macro didn't do. It checks
whenther passed variables are pointers of compatible type. It has only
one downside, and that is that we need to either a) define it with
ATTRIBUTE_UNUSED, which needs an exception in cfg.mk or b) do something
like ignore_value(variable); in the function body. I went with the
first variant.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For some reason, we allow a bridge name with %d in it, which we replace
with an unsigned integer to form a bridge name that does not yet exist
on the host.
Do not blindly pass it to virAsprintf if it's not the only conversion,
to prevent crashing on input like:
<network>
<name>test</name>
<forward mode='none'/>
<bridge name='virbr%d%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s'/>
</network>
Ignore any template strings that do not have exactly one %d conversion,
like we do in various drivers before calling virNetDevTapCreateInBridgePort.
Since some people use the same naming convention as libvirt for bridge
devices they create outside the context of libvirt, it is much nicer
if we check for those devices when looking for a bridge device name to
auto-assign to a new network.
We already check that any auto-assigned bridge device name for a
virtual network (e.g. "virbr1") doesn't conflict with the bridge name
for any existing libvirt network (via virNetworkSetBridgeName() in
conf/network_conf.c).
We also want to check that the name doesn't conflict with any bridge
device created on the host system outside the control of libvirt
(history: possibly due to the ploriferation of references to libvirt's
bridge devices in HOWTO documents all around the web, it is not
uncommon for an admin to manually create a bridge in their host's
system network config and name it "virbrX"). To add such a check to
virNetworkBridgeInUse() (which is called by virNetworkSetBridgeName())
we would have to call virNetDevExists() (from util/virnetdev.c); this
function calls ioctl(SIOCGIFFLAGS), which everyone on the mailing list
agreed should not be done from an XML parsing function in the conf
directory.
To remedy that problem, this patch removes virNetworkSetBridgeName()
from conf/network_conf.c and puts an identically functioning
networkBridgeNameValidate() in network/bridge_driver.c (because it's
reasonable for the bridge driver to call virNetDevExists(), although
we don't do that yet because I wanted this patch to have as close to 0
effect on function as possible).
There are a couple of inevitable changes though:
1) We no longer check the bridge name during
virNetworkLoadConfig(). Close examination of the code shows that
this wasn't necessary anyway - the only *correct* way to get XML
into the config files is via networkDefine(), and networkDefine()
will always call networkValidate(), which previously called
virNetworkSetBridgeName() (and now calls
networkBridgeNameValidate()). This means that the only way the
bridge name can be unset during virNetworkLoadConfig() is if
someone edited the config file on disk by hand (which we explicitly
prohibit).
2) Just on the off chance that somebody *has* edited the file by hand,
rather than crashing when they try to start their malformed
network, a check for non-NULL bridge name has been added to
networkStartNetworkVirtual().
(For those wondering why I don't instead call
networkValidateBridgeName() there to set a bridge name if one
wasn't present - the problem is that during
networkStartNetworkVirtual(), the lock for the network being
started has already been acquired, but the lock for the network
list itself *has not* (because we aren't adding/removing a
network). But virNetworkBridgeInuse() iterates through *all*
networks (including this one) and locks each network as it is
checked for a duplicate entry; it is necessary to lock each network
even before checking if it is the designated "skip" network because
otherwise some other thread might acquire the list lock and delete
the very entry we're examining. In the end, permitting a setting of
the bridge name during network start would require that we lock the
entire network list during any networkStartNetwork(), which
eliminates a *lot* of parallelism that we've worked so hard to
achieve (it can make a huge difference during libvirtd startup). So
rather than try to adjust for someone playing against the rules, I
choose to instead give them the error they deserve.)
3) virNetworkAllocateBridge() (now removed) would leak any "template"
string set as the bridge name. Its replacement
networkFindUnusedBridgeName() doesn't leak the template string - it
is properly freed.
Rename it to virNetDevGetIPv4AddressIoctl and make
virNetDevGetIPAddress a wrapper around it, allowing
other ways of getting the address to be implemented,
and still falling back to the old method.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This function does not make any sense now, that network driver is
(almost) dropped. I mean, previously, when threads were
serialized, this function was there to check, if no other network
with the same name or UUID exists. However, nowadays that threads
can run more in parallel, this function is useless, in fact it
gives misleading return values. Consider the following scenario.
Two threads, both trying to define networks with same name but
different UUID (e.g. because it was generated during XML parsing
phase, whatever). Lets assume that both threads are about to call
networkValidate() which immediately calls
virNetworkObjIsDuplicate().
T1: calls virNetworkObjIsDuplicate() and since no network with
given name or UUID exist, success is returned.
T2: calls virNetworkObjIsDuplicate() and since no network with
given name or UUID exist, success is returned.
T1: calls virNetworkAssignDef() and successfully places its
network into the virNetworkObjList.
T2: calls virNetworkAssignDef() and since network with the same
name exists, the network definition is replaced.
Okay, this is mainly because virNetworkAssignDef() does not check
whether name and UUID matches. Well, lets make it so! And drop
useless function too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's no need to lock the network driver, as network driver
initialization is done prior accepting any client. There's nobody
to hop in and do something over partially initialized driver. Nor
qemu driver is doing that.
==30532== Observed (incorrect) order is: acquisition of lock at 0x1439EF50
==30532== at 0x4C31A26: pthread_mutex_lock (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532== by 0x5324895: virMutexLock (virthread.c:88)
==30532== by 0x5307E86: virObjectLock (virobject.c:323)
==30532== by 0x5396440: virNetworkObjListForEach (network_conf.c:4511)
==30532== by 0x19B29308: networkStateInitialize (bridge_driver.c:686)
==30532== by 0x53E1CCC: virStateInitialize (libvirt.c:777)
==30532== by 0x11DEB7: daemonRunStateInit (libvirtd.c:906)
==30532== by 0x5324B6A: virThreadHelper (virthread.c:197)
==30532== by 0x4C30456: ??? (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532== by 0xA1EC1F2: start_thread (in /lib64/libpthread-2.19.so)
==30532== by 0xA4EDC8C: clone (in /lib64/libc-2.19.so)
==30532==
==30532== followed by a later acquisition of lock at 0x1439CD60
==30532== at 0x4C31A26: pthread_mutex_lock (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532== by 0x5324895: virMutexLock (virthread.c:88)
==30532== by 0x19B27B2C: networkDriverLock (bridge_driver.c:102)
==30532== by 0x19B27B60: networkGetDnsmasqCaps (bridge_driver.c:113)
==30532== by 0x19B2856A: networkUpdateState (bridge_driver.c:389)
==30532== by 0x53963E9: virNetworkObjListForEachHelper (network_conf.c:4488)
==30532== by 0x52E2224: virHashForEach (virhash.c:521)
==30532== by 0x539645B: virNetworkObjListForEach (network_conf.c:4512)
==30532== by 0x19B29308: networkStateInitialize (bridge_driver.c:686)
==30532== by 0x53E1CCC: virStateInitialize (libvirt.c:777)
==30532== by 0x11DEB7: daemonRunStateInit (libvirtd.c:906)
==30532== by 0x5324B6A: virThreadHelper (virthread.c:197)
==30532==
==30532== Required order was established by acquisition of lock at 0x1439CD60
==30532== at 0x4C31A26: pthread_mutex_lock (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532== by 0x5324895: virMutexLock (virthread.c:88)
==30532== by 0x19B27B2C: networkDriverLock (bridge_driver.c:102)
==30532== by 0x19B28DF9: networkStateInitialize (bridge_driver.c:609)
==30532== by 0x53E1CCC: virStateInitialize (libvirt.c:777)
==30532== by 0x11DEB7: daemonRunStateInit (libvirtd.c:906)
==30532== by 0x5324B6A: virThreadHelper (virthread.c:197)
==30532== by 0x4C30456: ??? (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532== by 0xA1EC1F2: start_thread (in /lib64/libpthread-2.19.so)
==30532== by 0xA4EDC8C: clone (in /lib64/libc-2.19.so)
==30532==
==30532== followed by a later acquisition of lock at 0x1439EF50
==30532== at 0x4C31A26: pthread_mutex_lock (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532== by 0x5324895: virMutexLock (virthread.c:88)
==30532== by 0x5307E86: virObjectLock (virobject.c:323)
==30532== by 0x538A09C: virNetworkAssignDef (network_conf.c:527)
==30532== by 0x5391EB2: virNetworkLoadState (network_conf.c:3008)
==30532== by 0x53922D4: virNetworkLoadAllState (network_conf.c:3128)
==30532== by 0x19B2929A: networkStateInitialize (bridge_driver.c:671)
==30532== by 0x53E1CCC: virStateInitialize (libvirt.c:777)
==30532== by 0x11DEB7: daemonRunStateInit (libvirtd.c:906)
==30532== by 0x5324B6A: virThreadHelper (virthread.c:197)
==30532== by 0x4C30456: ??? (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532== by 0xA1EC1F2: start_thread (in /lib64/libpthread-2.19.so)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Wikipedia's list of common misspellings [1] has a machine-readable
version. This patch fixes those misspellings mentioned in the list
which don't have multiple right variants (as e.g. "accension", which can
be both "accession" and "ascension"), such misspellings are left
untouched. The list of changes was manually re-checked for false
positives.
[1] https://en.wikipedia.org/wiki/Wikipedia:Lists_of_common_misspellings/For_machines
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The following is a long winded way to say this patch is avoiding a
false positive.
Coverity complains that calling networkPlugBandwidth() could eventually
end up with a NULL dereference on iface->bandwidth because in the
networkAllocateActualDevice there's a check of 'iface->bandwidth'
before deciding to try to use the 'portgroup' if it exists or to not
perferm the virNetDevBandwidthCopy if 'bandwidth' is not NULL.
Later in networkPlugBandwidth the 'iface->bandwidth' is sourced from
virDomainNetGetActualBandwidth - which would be either iface->bandwidth
or (preferably) iface->data.network.actual->bandwidth which would have
been filled in from either 'iface->bandwidth' or 'portgroup->bandwidth'
back in networkAllocateActualDevice
There *is* a check in networkCheckBandwidth for the result of the
virDomainNetGetActualBandwidth being NULL and a return 1 based on
that which would cause networkPlugBandwidth to exit properly and thus
never hit the condition that Coverity complains about.
However, since Coverity checks all paths - it somehow believes that
a return of 0 by networkCheckBandwidth in this condition would end
up causing the possible NULL dereference. The "fix" to silence Coverity
is to not have networkCheckBandwidth also call virDomainNetGetActualBandwidth
in order to get the ifaceBand, but rather have it accept it as an argument
which causes Coverity to "see" that it's the exit condition of 1 that won't
have the possible NULL dereference. Since we're passing that, I added the
passing of iface->mac rather than passing iface as well. This just hopefully
makes sure someone doesn't undo this in the future...
Valgrind detected a leak:
==17820== 102 (56 direct, 46 indirect) bytes in 1 blocks are definitely lost in loss record 479 of 646
==17820== at 0x4A08946: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==17820== by 0x508521A: virAllocVar (viralloc.c:560)
==17820== by 0x50D9FCA: virObjectNew (virobject.c:193)
==17820== by 0x50A4FD9: dnsmasqCapsNewEmpty (virdnsmasq.c:784)
==17820== by 0x50A514E: dnsmasqCapsNewFromBinary (virdnsmasq.c:830)
==17820== by 0x1B508287: networkStateInitialize (bridge_driver.c:666)
It looks like commit 172acef introduced the problem, because
networkGetDnsmasqCaps() increments the reference count but an
early exit never does a matching decrement.
* src/network/bridge_driver.c (networkStateCleanup): Plug leak.
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that the network driver lock is ash heap of history,
we can use more of networkObjFromNetwork().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have fine grained locks, there's no need to
lock the whole driver. We can rely on self-locking APIs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In order to drop network driver lock, lets annotate which
structure items are immutable, which have self-locking
APIs and so on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is not an immutable pointer and can change during lifetime.
Therefore, in order to drop network driver lock, we must use an
internal accessor which does not lock the network driver yet, but
it will soon. Now it merely returns an referenced object.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Well, network driver code has the driver accessible as a global
variable. This makes any rework hard, as it's unclear where the
variable is accessed and/or modified. Lets just pass the driver
as a parameter to all functions where needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch turns both virNetworkObjFindByUUID() and
virNetworkObjFindByName() to return an referenced object so that
even if caller unlocks it, it's for sure that object won't
disappear meanwhile. Especially if the object (in general) is
locked and unlocked during the caller run.
Moreover, this commit is nicely small, since the object unrefing
can be done in virNetworkObjEndAPI().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far, this is pure code replacement. But once we introduce
reference counting to virNetworkObj this will be more handy as
there'll be only one function to change: virNetworkObjEndAPI().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far it's just a structure which happens to have 'Obj' in its
name, but otherwise it not related to virObject at all. No
reference counting, not virObjectLock(), nothing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Undefining a running, autostarted domain removes the autostart link, but
dom->autostart is not cleared. If the domain is subsequently redefined,
libvirt thinks it is already autostarted and will not create the link
even if requested:
# virsh dominfo example | grep Autostart
Autostart: enable
# ls /etc/libvirt/qemu/autostart/example.xml
/etc/libvirt/qemu/autostart/example.xml
# virsh undefine example
Domain example has been undefined
# virsh define example.xml
Domain example defined from example.xml
# virsh dominfo example | grep Autostart
Autostart: enable
# virsh autostart example
Domain example marked as autostarted
# ls /etc/libvirt/qemu/autostart/example.xml
ls: cannot access /etc/libvirt/qemu/autostart/example.xml: No such file or directory
This commit ensures dom->autostart is cleared whenever the config and
autostart link (if present) are removed.
The bridge network driver cleared this flag itself in networkUndefine.
This commit moves this into virNetworkDeleteConfig for symmetry with
virDomainDeleteConfig, and to ensure it is not missed in future network
drivers.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Well, one day this will be self-locking object, but not today.
But lets prepare the code for that! Moreover,
virNetworkObjListFree() is no longer needed, so turn it into
virNetworkObjListDispose().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In order to hide the object internals (and use just accessors
everywhere), lets store a pointer to the object, instead of object
itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
