Commit Graph

99 Commits

Author SHA1 Message Date
Daniel P. Berrange
fc8c1787d8 Enable full RELRO mode
By passing the flags -z relro -z now to the linker, we can force
it to resolve all library symbols at startup, instead of on-demand.
This allows it to then make the global offset table (GOT) read-only,
which makes some security attacks harder.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-03 16:19:35 +01:00
Daniel P. Berrange
1150999ca4 Build all binaries with PIE
PIE (position independent executable) adds security to executables
by composing them entirely of position-independent code (PIC. The
.so libraries already build with -fPIC. This adds -fPIE which is
the equivalent to -fPIC, but for executables. This for allows Exec
Shield to use address space layout randomization to prevent attackers
from knowing where existing executable code is during a security
attack using exploits that rely on knowing the offset of the
executable code in the binary, such as return-to-libc attacks.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-03 16:19:35 +01:00
Jiri Denemark
b8a32e0e94 build: Regenerate man pages on version bump
Whenever libvirt version changes in configure.ac, we need to regenerate
man pages so that they contain correct version info.
2013-01-29 13:23:19 +01:00
Daniel P. Berrange
509eb51e7c Implement the RPC protocol for the libvirt-lxc.la library
Add the infrastructure for the libvirt-lxc.la library to
the remote protocol client and daemon

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-15 18:16:53 +00:00
Daniel P. Berrange
cf7ac00ebd Rename HAVE_POLKIT to WITH_POLKIT 2013-01-14 13:29:55 +00:00
Daniel P. Berrange
321a7d53f3 Convert HAVE_SASL to WITH_SASL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:23 +00:00
Eric Blake
7cc522beb6 maint: distribute libvirtd.service.in
I did a build --without-libvirtd, then ran 'make dist'.  The
resulting tarball was broken, with a complaint that make did not
know how to create libvirtd.service.in.  I traced it to a use
of EXTRA_DIST inside a conditional.

* daemon/Makefile.am (EXTRA_DIST): Hoist libvirtd.service.in
outside of WITH_LIBVIRTD conditional.
2013-01-09 14:36:25 -07:00
Eric Blake
a1fd56cb30 build: install libvirt sysctl file correctly
https://bugzilla.redhat.com/show_bug.cgi?id=887017 reports that
even though libvirt attempts to set fs.aio-max-nr via sysctl,
the file was installed with the wrong name and gets ignored by
sysctl.  Furthermore, 'man systcl.d' recommends that packages
install into hard-coded /usr/lib/sysctl.d (even when libdir is
/usr/lib64), so that sysadmins can use /etc/sysctl.d for overrides.

* daemon/Makefile.am (install-sysctl, uninstall-sysctl): Use
correct location.
* libvirt.spec.in (network_files): Reflect this.
2013-01-07 08:56:37 -07:00
Eric Blake
5ec4b22b77 build: .service files don't need to be executable
See also commit 66ff2dd, where we avoided installing these files
as executables.

* daemon/Makefile.am (libvirtd.service): Drop chmod.
* tools/Makefile.am (libvirt-guests.service): Likewise.
* src/Makefile.am (virtlockd.service, virtlockd.socket):
Likewise.
2013-01-07 08:56:36 -07:00
Eric Blake
462a69621e build: use common .in replacement mechanism
We had several different styles of .in conversion in our Makefiles:
ALLCAPS, @ALLCAPS@, @lower@, ::lower::
Canonicalize on one form, to make it easier to copy and paste
between .in files.

Also, we were using some non-portable sed constructs: \@ is an
undefined escape sequence (it happens to be @ itself in GNU sed,
but POSIX allows it to mean something else), as well as risky
behavior (failure to consistently quote things means a space
in $(sysconfdir) could throw things off; also, Autoconf recommends
using | rather than , or ! in the s||| operator, because | has to
be quoted in shell and is therefore less likely to appear in file
names than , or !).

Fix all of these uses to follow the same syntax.

* daemon/libvirtd.8.in: Switch to @var@.
* tools/virt-xml-validate.in: Likewise.
* tools/virt-pki-validate.in: Likewise.
* src/locking/virtlockd.init.in: Likewise.
* daemon/Makefile.am: Prefer | over ! in sed.
(libvirtd.8): Prefer consistent substitution.
(libvirtd.init, libvirtd.service): Avoid non-portable sed.
* tools/Makefile.am (libvirt-guests.sh, libvirt-guests.init)
(libvirt-guests.service): Likewise.
(virt-xml-validate, virt-pki-validate, virt-sanlock-cleanup):
Prefer consistent capitalization.
* src/Makefile.am (virtlockd.init, virtlockd.service)
(virtlockd.socket): Prefer consistent substitution.
2013-01-07 08:56:36 -07:00
Eric Blake
2639949abe build: check for pod errors
Patch 61299a1c fixed a long-standing pod error in the man page.
But we should be preventing these up front.
See also https://bugzilla.redhat.com/show_bug.cgi?id=870273

* tools/Makefile.am (virt-xml-validate.1, virt-pki-validate.1)
(virt-host-validate.1, virt-sanlock-cleanup.8, virsh.1): Reject
pod conversion errors.
* daemon/Makefile.am ($(srcdir)/libvirtd.8.in): Likewise.
2012-10-26 15:13:39 -06:00
Cole Robinson
e1019e9e84 Only keep one polkit rules file
Just tweak it at build time depending on what polkit version we are
building for.
2012-10-14 15:21:18 -04:00
Cole Robinson
0801c14908 daemon: Use $(AM_V_GEN) in a few more places 2012-10-14 13:35:17 -04:00
Doug Goldstein
b95ad92e05 build: define WITH_INTERFACE for the driver
Based exclusively on work by Eric Blake in a patch posted with the same
subject. However some modifications related to comments and my plans to
add another backend.

Added WITH_INTERFACE as the only automake variable deciding whether to
build the driver and using WITH_NETCF to identify that we're wanting to
use the netcf library as the backend.

* configure.ac: Added with_interface
* src/interface/netcf_driver.c: Renamed..
* src/interface/interface_backend_netcf.c: ..to this to match storage.
* src/interface/netcf_driver.h: Renamed..
* src/interface/interface_driver.h: ..to this.
* daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF.
* libvirt.spec.in: Add RPM support for --with-interface
2012-09-19 08:27:01 -06:00
Jim Fehlig
f781e27653 Fix xen driver following changes to make it stateful
Recent work to improve support for loadable driver modules introduced
a regression in the xen driver.  The legacy xen driver is now a
stateful, libvirtd driver but was not being registered when building
without driver modules.

A slight behavior change was also noted in the xen drivers when
built as driver modules.  Previously, explicitly specifying a
connection URI was not necessary, but now

Compiled against library: libvirt 0.10.0
Using library: libvirt 0.10.0
Using API: QEMU 0.10.0
error: failed to get the hypervisor version
error: internal error Cannot find suitable emulator for x86_64

The xen drivers need to be registered before the qemu driver since
the qemu driver will return success with a null connection URI.
This ordering is safe since the xen drivers will decline when not
running the xen kernel.
2012-08-31 10:28:55 +08:00
Doug Goldstein
910041bac8 Replace unset REMOTE_PID_FILE with proper value
REMOTE_PID_FILE is no longer used in the source or the build process but
the man page still used it resulting in no file name being displayed.
The same value that the libvirtd daemon code uses is now used in the man
page.
2012-08-15 21:40:38 +08:00
Doug Goldstein
9cdd73a245 Fix man page file paths to real paths
Currently the man page has paths that start with @sysconfdir@,
@localstatedir@ and @remote_pid_file@. The sed command attempts to
replace these during the build but unfortunately pod2man gets to the
files first and escapes the @ character resulting in the sed not
working. This removes the @ character and makes the paths correct.
2012-08-15 21:40:38 +08:00
Jiri Denemark
2f2ca02195 build: Link security manager into libvirt.so
Security manager is not a dynamically loadable driver, it's a common
infrastructure similar to util, conf, cpu, etc. used by individual
drivers. Such code is allowed to be linked into libvirt.so.

This reverts commit ec5b7bd2ec and most of
aae5cfb699.

This patch is supposed to fix virdrivermoduletest failures for qemu and
lxc drivers as well as libvirtd's ability to load qemu and lxc drivers.
2012-08-02 16:17:00 +02:00
Jiri Denemark
ec5b7bd2ec build: Link security driver into daemon
Commit aae5cfb699 removed security driver
from libvirt_la but forgot to link it into libvirtd in case libvirt is
built without modules.
2012-08-01 13:08:51 +02:00
Daniel P. Berrange
ca5ab84073 Make RPC code generator a little more flexible
Update the gendispatch.pl script to get a little closer to
being able to generate code for the LXC monitor, by passing
in the struct prefix separately from the procedure prefix.
Also allow method names using virCapitalLetters instead
of vir_underscore_separator

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-07-30 12:50:23 +01:00
Laine Stump
bc80977144 Fixup manpage names and copyright dates
The copyright dates in the manpages haven't been updated in awhile.

Also, when pod2man converts a pod file into a manpage, it will only
remove the extension from the filename if it is ".pod". Some of the
libvirt pod files are named *.pod.in, and that filename is placed
unchanged into the manpage. This patch uses pod2man's --name option to
fix that.

Believe it or not, there's even a BZ for this:

  https://bugzilla.redhat.com/show_bug.cgi?id=819364
2012-07-25 12:46:29 -04:00
Doug Goldstein
90fcbb9f7c Fix libnl CFLAGS/LIBS inclusion
When using libnl, use the variables pkg-config provides in case there are
additional libraries or CFLAGS required to build it. Specifically if
the libnl headers are not directly in /usr/include.
2012-07-24 14:59:48 -06:00
Guido Günther
78bf84f4cf Don't install systemd service files executable
since they aren't. Detected by Debian's lintian.
2012-06-26 18:12:10 +02:00
Eric Blake
3c3644d30f build: ensure storage driver is used
Commit 1c275e9a accidentally dropped the storage driver from
libvirtd, because it depended on a C preprocessor macro that
was not defined.  Furthermore, if you do './configure
--without-storage-dir --with-storage-disk' or any other combination
where you explicitly build a subset of storage backends excluding
the dir backend, then the build is broken.

Based on analysis by Osier Yang.

* configure.ac (WITH_STORAGE): Define top-level conditional.
* src/Makefile.am (mod_LTLIBRARIES): Build driver even when
storage_dir is disabled.
* daemon/libvirtd.c: Pick up storage driver for any backend, not
just dir.
* daemon/Makefile.am (libvirtd_LDADD): Likewise.
2012-06-06 12:16:07 +08:00
Eric Blake
13af87f23c build: use same perl binary throughout build
Some of our rules used $(PERL), while others used 'perl'.  Always
using the variable allows a developer to point to a different (often
better) perl than the default one found on $PATH.

* daemon/Makefile.am ($(srcdir)/remote_dispatch.h): s/perl/$(PERL).
* src/Makefile.am ($(srcdir)/remote/remote_client_bodies.h)
(PDWTAGS, %protocol.c, %_probes.stp): Likewise.
2012-05-30 09:33:55 -06:00
Eric Blake
fb59cf7a58 build: fix testing of augeas files in VPATH builds
Without this fix, a VPATH build (such as used by ./autobuild.sh)
fails with messages like:

make[3]: Entering directory `/home/remote/eblake/libvirt-tmp2/build/daemon'
../../build-aux/augeas-gentest.pl libvirtd.conf ../../daemon/test_libvirtd.aug.in test_libvirtd.aug
cannot read libvirtd.conf: No such file or directory at ../../build-aux/augeas-gentest.pl line 38.

Since the test files are not part of the tarball, we can generate
them into the build dir, but rather than create a subdirectory
just for the test file, it is easier to test them directly in
libvirt.git/src.

* daemon/Makefile.am (AUG_GENTEST): Factor out definition.
(test_libvirtd.aug): Look for correct file.
* src/Makefile.am (AUG_GENTEST): Use $(PERL).
(qemu/test_libvirtd_qemu.aug, lxc/test_libvirtd_lxc.aug)
(locking/test_libvirt_sanlock.aug): Rename to avoid subdirectories.
(check-augeas-qemu, check-augeas-lxc, check-augeas-sanlock): Reflect
location of built tests.
* configure.ac (PERL): Substitute perl.
2012-05-30 09:29:32 -06:00
Daniel P. Berrange
1e8ecfedeb Fix linking to DTrace probes file
There was no rule forcing libvirt_qemu_probes.o to be built
before libvirt_qemu_probes.lo was used. Also libvirtd was
still referencing the .o file, rather than the .lo file.

Both the .lo and .o file must be listed as DEPENDENCIES,
otherwise libtool will unhelpfully delete the .o file
once the .lo file is created.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-05-28 12:35:39 +01:00
Daniel P. Berrange
de9758ae9b Autogenerate augeas test case from default config files
When adding new config file parameters, the corresponding
additions to the augeas lens' are constantly forgotten.
Also there are augeas test cases, these don't catch the
error, since they too are never updated.

To address this, the augeas test cases need to be auto-generated
from the example config files.

* build-aux/augeas-gentest.pl: Helper to generate an
  augeas test file, substituting in elements from the
  example config files
* src/Makefile.am, daemon/Makefile.am: Switch to
  auto-generated augeas test cases
* daemon/test_libvirtd.aug, daemon/test_libvirtd.aug.in,
  src/locking/test_libvirt_sanlock.aug,
  src/locking/test_libvirt_sanlock.aug.in,
  src/lxc/test_libvirtd_lxc.aug,
  src/lxc/test_libvirtd_lxc.aug.in,
  src/qemu/test_libvirtd_qemu.aug,
  src/qemu/test_libvirtd_qemu.aug.in: Remove example
  config file data, replacing with a ::CONFIG:: placeholder

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-05-28 11:07:12 +01:00
Daniel P. Berrange
a4e45a06c0 Split QEMU dtrace probes into separate file
When building as driver modules, it is not possible for the QEMU
driver module to reference the DTrace/SystemTAP probes linked into
the main libvirt.so. Thus we need to move the QEMU probes into a
separate file 'libvirt_qemu_probes.d'. Also rename the existing
file from 'probes.d' to 'libvirt_probes.d' while we're at it

* daemon/Makefile.am, src/internal.h: Include libvirt_probes.h
  instead of probes.h
* src/Makefile.am: Add rules for libvirt_qemu_probes.d
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor_json.c,
  src/qemu/qemu_monitor_text.c: Include libvirt_qemu_probes.h
* src/libvirt_probes.d: Rename from probes.d
* src/libvirt_qemu_probes.d: QEMU specific probes formerly
  in probes.d

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-05-24 13:18:01 +01:00
Daniel P. Berrange
2223ea984c The policy kit and HAL node device drivers both require a
DBus connection. The HAL device code further requires that
the DBus connection is integrated with the event loop and
provides such glue logic itself.

The forthcoming FirewallD integration also requires a
dbus connection with event loop integration. Thus we need
to pull the current event loop glue out of the HAL driver.

Thus we create src/util/virdbus.{c,h} files. This contains
just one method virDBusGetSystemBus() which obtains a handle
to the single shared system bus instance, with event glue
automagically setup.
2012-04-19 17:03:10 +01:00
Daniel P. Berrange
db46f3cefe Split libvirtd config file loading out into separate files
To enable creation of unit tests, split the libvirtd config file
loading code out into separate files.

* daemon/libvirtd.c: Delete config loading code / structs
* daemon/libvirtd-config.c, daemon/libvirtd-config.h: Config
  file loading APIs

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-04-10 11:08:51 +01:00
Daniel P. Berrange
e7eca6e4be Don't install sysctl file on non-Linux hosts
* configure.ac: Set WITH_SYSCTL only on Linux hosts
* daemon/Makefile.am: Conditionalize install-sysctl using WITH_SYSCTL

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Cc: Jason Helfman <jhelfman@e-e.com>
2012-04-04 19:31:40 +01:00
Daniel P. Berrange
1d4c4d9d4f Workaround python header file insanity
The /usr/include/python/pyconfig.h file pollutes the global
namespace with a huge number of HAVE_XXX and WITH_XXX
defines. These change what we detected in our own config.h
In particular if you try to build without DTrace, python's
headers turn it back on with predictable fail.

THe hack to workaround this is to rename WITH_DTRACE to
WITH_DTRACE_PROBES to avoid the namespace clash
2012-02-24 16:43:27 +00:00
Eric Blake
cb33ee1fad build: clean up CPPFLAGS/INCLUDES usage
Our syntax checker missed all-lower-case variables (this will
be fixed by the next .gnulib update).  Additionally, anywhere
that we mix in-tree files with generated files, automake recommends
listing builddir prior to srcdir for VPATH builds.

* src/Makefile.am (*_la_CFLAGS): Favor $(top_srcdir).
(INCLUDES): Likewise, and follow automake recommendations on
builddir before srcdir.
* python/Makefile.am (INCLUDES): Swap directory order.
* tests/Makefile.am (INCLUDES): Likewise.
* tools/Makefile.am (INCLUDES): Likewise.
* daemon/Makefile.am (INCLUDES): Likewise.
(libvirtd.init, libvirtd.service): Favor $().
* examples/hellolibvirt/Makefile.am (hellolibvirt_LDADD):
Likewise.
* examples/openauth/Makefile.am (openauth_LDADD): Likewise.
* examples/dominfo/Makefile.am (INCLUDES): Drop dead include.
* examples/domsuspend/Makefile.am (INCLUDES): Likewise.
2012-02-03 10:36:02 -07:00
Eric Blake
104046712f build: follow directory install conventions
Commit 4d9e51f6 fixed a 'make uninstall' failure, but failed
to follow other conventions already present in src/Makefile.am.
In particular, we prefer MKDIR_P over mkdir -p, and should
have a matching rmdir during uninstall for every directory
created during install (the idea being that uninstall in a
DESTDIR should be clean, while installation in the final
system should not fail with non-empty directories left behind).

* tools/Makefile.am (install-sysconfig, install-initscript)
(install-systemd): Use MKDIR_P.
(uninstall-sysconfig, uninstall-initscript, uninstall-systemd):
Also remove directories.
* daemon/Makefile.am (install-data-local, install-data-polkit)
(install-logrotate, install-sysconfig, install-sysctl)
(install-init-redhat, install-init-upstart, install-init-systemd)
(install-data-sasl): Use MKDIR_P.
(uninstall-data-polkit, uninstall-sysconfig, uninstall-sysctl)
(uninstall-init-redhat, uninstall-init-upstart)
(uninstall-init-systemd): Also remove directory.
(uninstall-logrotate): New rule.
(uninstall-local): Add uninstall-logrotate.
2011-12-12 10:26:57 -07:00
Dave Allan
4d9e51f633 Fix make uninstall
Make uninstall currently fails with the following message:

rmdir /etc/sasl2/
rmdir: failed to remove `/etc/sasl2/': Directory not empty

That's fine (correct in fact) so force the command to return success
with || :
2011-12-12 11:19:45 +01:00
Daniel P. Berrange
4789fb2e4e Add support for systemd init service
This patch adds support for a systemd init service for libvirtd
and libvirt-guests. The libvirtd.service is *not* written to use
socket activation, since we want libvirtd to start on boot so it
can do guest auto-start.

The libvirt-guests.service is pretty lame, just exec'ing the
original init script for now. Ideally we would factor out the
functionality, into some shared tool.

Instead of

  ./configure --with-init-script=redhat

You can now do

  ./configure --with-init-script=systemd

Or better still:

  ./configure --with-init-script=systemd+redhat

We can also now support install of the upstart init script

* configure.ac: Add systemd, and systemd+redhat options to
  --with-init-script option
* daemon/Makefile.am: Install systemd services
* daemon/libvirtd.sysconf: Add note about unused env variable
  with systemd
* daemon/libvirtd.service.in: libvirtd systemd service unit
* libvirt.spec.in: Add scripts to installing systemd services
  and migrating from legacy init scripts
* tools/Makefile.am: Install systemd services
* tools/libvirt-guests.init.sh: Rename to tools/libvirt-guests.init.in
* tools/libvirt-guests.service.in: systemd service unit
2011-11-18 16:16:02 +00:00
Jim Fehlig
e86417e90c Revert commit 0f590c62
As noted by Daniel Berrange [1], the proper fix for the older
PolicyKit build issue is to add virNetServerGetDBusConn to
libvirt_private.syms.  Revert unnecessary changes to
daemon/Makefile.am

[1] https://www.redhat.com/archives/libvir-list/2011-November/msg00852.html
2011-11-16 14:11:59 -07:00
Jim Fehlig
0f590c62b2 Fix build with polkit0
I missed adding libvirt_driver_remote.la to libvirtd_LDADD in
commit b8adfcc6, which didn't cause a problem in 0.9.6 but
results in this build error in 0.9.7

libvirtd-remote.o: In function `remoteDispatchAuthPolkit':
remote.c:(.text+0x188dd): undefined reference to `virNetServerGetDBusConn'
2011-11-15 15:11:49 -07:00
Jiri Denemark
15d52307f9 build: Fix VPATH build with new probes 2011-10-11 21:41:51 +02:00
Daniel P. Berrange
ddf3bd32ce Rewrite all the DTrace/SystemTAP probing
The libvirtd daemon had a few crude system tap probes. Some of
these were broken during the RPC rewrite. The new modular RPC
code is structured in a way that allows much more effective
tracing. Instead of trying to hook up the original probes,
define a new set of probes for the RPC and event code.

The master probes file is now src/probes.d.  This contains
probes for virNetServerClientPtr, virNetClientPtr, virSocketPtr
virNetTLSContextPtr and virNetTLSSessionPtr modules. Also add
probes for the poll event loop.

The src/dtrace2systemtap.pl script can convert the probes.d
file into a libvirt_probes.stp file to make use from systemtap
much simpler.

The src/rpc/gensystemtap.pl script can generate a set of
systemtap functions for translating RPC enum values into
printable strings. This works for all RPC header enums (program,
type, status, procedure) and also the authentication enum

The PROBE macro will automatically generate a VIR_DEBUG
statement, so any place with a PROBE can remove any existing
manual DEBUG statements.

* daemon/libvirtd.stp, daemon/probes.d: Remove obsolete probing
* daemon/libvirtd.h: Remove probe macros
* daemon/Makefile.am: Remove all probe buildings/install
* daemon/remote.c: Update authentication probes
* src/dtrace2systemtap.pl, src/rpc/gensystemtap.pl: Scripts
  to generate STP files
* src/internal.h: Add probe macros
* src/probes.d: Master list of probes
* src/rpc/virnetclient.c, src/rpc/virnetserverclient.c,
  src/rpc/virnetsocket.c, src/rpc/virnettlscontext.c,
  src/util/event_poll.c: Insert probe points, removing any
  DEBUG statements that duplicate the info
2011-10-11 11:26:13 +01:00
Daniel P. Berrange
22af84dc52 Make libvirt.so include the RPC server code
To avoid static linking libvirtd to the RPC server code, which
then prevents sane introduction of DTrace probes, put it all
in the libvirt.so, and export it

* daemon/Makefile.am: Don't link to RPC libraries
* src/Makefile.am: Link all RPC libraries to libvirt.so
* src/libvirt_private.syms: Export all RPC functions
2011-10-11 11:11:52 +01:00
Eric Blake
5298551e07 init: raise default system aio limits
https://bugzilla.redhat.com/show_bug.cgi?id=740899 documents that
if qemu uses aio=native for its disks, then it consumes 128 aio
requests per disk.  On a host with multiple guests, this can quickly
run out of kernel aio requests with the default aio-max-nr of
65536.  Kernel developers have confirmed that there is no up-front
cost to raising this limit (a larger limit merely implies that more
aio requests can be issued in parallel, which in turn will result
in more kernel memory allocation, only if the system really does use
that many requests).  Since the system default limit prevents 256
disks, which is well within libvirt's current scalability, this
patch installs a file to raise the limit and document it in case a
system administrator has further cause to tune the limit.  The
install only works on platforms new enough to source /etc/sysctl.d/*
alongside /etc/sysctl.conf (F14 and RHEL 6).

* daemon/libvirtd.sysctl: New file.
* daemon/Makefile.am (EXTRA_DIST): Ship it.
(install-init, uninstall-init): Install it.
* libvirt.spec.in (%files): Include it in rpm.
2011-10-05 14:49:35 -06:00
Matthias Bolte
b590866bdb freebsd: Fix build problem due to picking up the wrong libvirt.h
Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location.  But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.

Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first.  Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.

Signed-off-by: Eric Blake <eblake@redhat.com>
2011-07-29 07:35:54 -06:00
Eric Blake
ff81956ac6 maint: add missing copyright notices
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.

* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
2011-07-28 15:01:17 -06:00
Matthias Bolte
fbd5465a5b rpc: Make the dispatch generator handle 'void name(void)' style procedures
The only 'void name(void)' style procedure in the protocol is 'close' that
is handled special, but also programming errors like a missing _args or
_ret suffix on the structs in the .x files can create such a situation by
accident. Making the generator aware of this avoids bogus errors from the
generator such as:

  Use of uninitialized value in exists at ./rpc/gendispatch.pl line 967.

Also this allows to get rid of the -c option and the special case code for
the 'close' procedure, as the generator handles it now correctly.

Reported by Michal Privoznik
2011-07-21 17:00:59 +02:00
Daniel P. Berrange
df0b57a95a Convert libvirtd over to the new RPC handling APIs
This guts the libvirtd daemon, removing all its networking and
RPC handling code. Instead it calls out to the new virServerPtr
APIs for all its RPC & networking work

As a fallout all libvirtd daemon error reporting now takes place
via the normal internal error reporting APIs. There is no need
to call separate error reporting APIs in RPC code, nor should
code use VIR_WARN/VIR_ERROR for reporting fatal problems anymore.

* daemon/qemu_dispatch_*.h, daemon/remote_dispatch_*.h: Remove
  old generated dispatcher code
* daemon/qemu_dispatch.h, daemon/remote_dispatch.h: New dispatch
  code
* daemon/dispatch.c, daemon/dispatch.h: Remove obsoleted code
* daemon/remote.c, daemon/remote.h: Rewrite for new dispatch
  APIs
* daemon/libvirtd.c, daemon/libvirtd.h: Remove all networking
  code
* daemon/stream.c, daemon/stream.h: Update for new APIs
* daemon/Makefile.am: Link to libvirt-net-rpc-server.la
2011-06-28 17:33:19 +01:00
Daniel P. Berrange
b17b4afafd Move the RPC generator scripts into src/rpc
Move the daemon/remote_generator.pl to src/rpc/gendispatch.pl
and move the src/remote/rpcgen_fix.pl to src/rpc/genprotocol.pl

* daemon/Makefile.am: Update for new name/location of generator
* src/Makefile.am: Update for new name/location of generator
2011-06-24 11:48:49 +01:00
Eric Blake
5c991c8628 maint: use consistent file name for threading notes
* daemon/THREADING.txt: Rename...
* daemon/THREADS.txt: ...to match qemu thread notes.
* daemon/Makefile.am (EXTRA_DIST): Reflect rename.
2011-05-31 13:54:45 -06:00
Wen Congyang
7ed95b2c4f build: generate files when building without libvirtd
Steps to reproduce this problem:
1. # ./autogen.sh --without-libvirtd
2. # make dist
   ...
   make[1]: Entering directory `/home/wency/source/libvirt-nodaemon/daemon'
   make[1]: *** No rule to make target `remote_dispatch_prototypes.h', needed by `distdir'.  Stop.
   make[1]: Leaving directory `/home/wency/source/libvirt-nodaemon/daemon'
   make: *** [distdir] Error 1
2011-05-22 09:36:24 +08:00