The xenUnifiedDomainGetXMLDesc driver can assume that
the XM and XenD drivers are always present
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make the xenUnifiedDomainGetInfo and xenUnifiedDomainGetState drivers
call the correct sub-driver APIs directly.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make xenUnifiedDomainGetOSType directly call either the
xenHypervisorDomainGetOSType or xenDaemonDomainGetOSType
method depending on whether the domain is active or not.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditionally call the xenDaemonDomainDestroyFlags API
since the XenD driver is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make the xenUnifiedDomainShutdownFlags and xenUnifiedDomainReboot
driver methods unconditionally call the XenD APIs for shutdown
and reboot. Delete the unreachable impls in the XenStore driver.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update xenUnifiedDomainSuspend and xenUnifiedDomainResume to
unconditionally invoke the XenD APIs for suspend/resume. Delete
the impls in the hypervisor driver which was unreachable.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditionally invoke the xenHypervisorLookupDomainByID,
xenHypervisorLookupDomainByUUID or xenDaemonLookupByName
for looking up domains. Fallback to xenXMDomainLookupByUUID
and xenXMDomainLookupByName for legacy XenD without inactive
domain support
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditionally call xenDaemonCreateXML in the
xenUnifiedDomainCreateXML driver, since the XenD
driver is always present.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The XenStore driver is mandatory, so it can be used unconditonally
for the xenUnifiedConnectListDomains & xenUnifiedConnectNumOfDomains
drivers. Delete the unused XenD and Hypervisor driver code for
listing / counting domains
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The hypervisor driver is mandatory, so the the call to
xenHypervisorGetVersion must always succeed. Thus there
is no need to ever run xenDaemonGetVersion
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since the Xen driver was changed to only execute inside libvirtd,
there is no scenario in which it will be opened from a non-privileged
context. Thus all the code dealing with opening the sub-drivers can
be simplified to assume that they are always privileged.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virGetHostname() API has a bogus virConnectPtr
parameter. This is because virtualization drivers directly
reference this API in their virDriverPtr tables, tieing its
API design to the public virConnectGetHostname API design.
This also causes problems for access control checks since
these must only be done for invocations from the public
API, not internal invocation.
Remove the bogus virConnectPtr parameter, and make each
hypervisor driver provide a dedicated function for the
driver API impl. This will allow access control checks
to be easily inserted later.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
There will soon be other items related to pci hostdevs that need to be
in the same part of the hostdevsubsys union as the pci address (which
is currently a single member called "pci". This patch replaces the
single member named pci with a struct named pci that contains a single
member named "addr".
This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.
With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.
Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
- called for a single device parsed and for every single device in a
domain config. A virDomainDeviceDefPtr is passed along with the
domain definition and virCaps.
* virDomainDefPostParseCallback, (domainPostParseCallback)
- A callback that is meant to process the domain config after it's
parsed. A virDomainDefPtr is passed along with virCaps.
Both types of callbacks support arbitrary opaque data passed for the
callback functions.
Errors may be reported in those callbacks resulting in a XML parsing
failure.
This patch is the result of running:
for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done
and a few manual tweaks.
Format the address using the helper instead of having similar code in
multiple places.
This patch also fixes leak of the MAC address string in
ebtablesRemoveForwardAllowIn() and ebtablesAddForwardAllowIn() in
src/util/virebtables.c
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.
This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:
1) Get rid of the stuff from virCaps
2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.
This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
'virsh capabilities' will now include a new <memory> element
per <cell> of the topology, as in:
<topology>
<cells num='2'>
<cell id='0'>
<memory unit='KiB'>12572412</memory>
<cpus num='12'>
...
</cell>
Signed-off-by: Eric Blake <eblake@redhat.com>
Arguments for driver entry points are checked in libvirt.c, so no need to
check again. Make function entry points consistent. Don't type caste the
privateData.
Way back when I started making changes for Coverity messages my first set
were to a bunch of CHECKED_RETURN errors. In particular virAsprintf() had
a few callers that Coverity noted didn't check their return (although some
did check if the buffer being printed to was NULL or not).
It was suggested at the time as a further patch an ATTRIBUTE_RETURN_CHECK
should be added to virAsprintf(), see:
https://www.redhat.com/archives/libvir-list/2013-January/msg00120.html
This patch does that and fixes a few more instances not found by Coverity
that failed the check.
Commit 87b4c10c6c added code that may call
the virCapabilitiesClearHostNUMACellCPUTopology function with
uninitialized second argument. Although the value wouldn't be used some
compilers whine about that.
This will allow storing additional topology data in the NUMA topology
definition.
This patch changes the storage type and fixes fallout of the change
across the drivers using it.
This patch also changes semantics of adding new NUMA cell information.
Until now the data were re-allocated and copied to the topology
definition. This patch changes the addition function to steal the
pointer to a pre-allocated structure to simplify the code.
Make cpuset local to the while loop and free it once done with it each
time through the loop. Add a sa_assert() to virBitmapParse() to keep Coverity
from believing there could be a negative return and possible resource leak.
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The final patch in Hu Tao's series to enhance virBitmap actually
removes virDomainCpuSetParse and virDomainCpuSetFormat as "no longer
used", and the rest of the series hadn't taken care of two uses of
virDomainCpuSetParse in the xen code.
This patch replaces those with appropriate virBitmap functions. It
should be pushed prior to the patch removing virDomainCpuSetParse.
virDomainVcpuPinAdd does a realloc on vcpupin_list if the new vcpu pin
definition doesn't fit into the array. The list is an array of pointers
but the function definition didn't support returning the changed pointer
to the caller if it was realloced. This caused segfaults if realloc
would change the base pointer.
Move the functions the parse/format, and validate PCI addresses to
their own file so they can be conveniently used in other places
besides device_conf.c
Refactoring existing code without causing any functional changes to
prepare for new code.
This patch makes the code reusable.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
This converts the following public API datatypes to use the
virObject infrastructure:
virConnectPtr
virDomainPtr
virDomainSnapshotPtr
virInterfacePtr
virNetworkPtr
virNodeDevicePtr
virNWFilterPtr
virSecretPtr
virStreamPtr
virStorageVolPtr
virStoragePoolPtr
The code is significantly simplified, since the mutex in the
virConnectPtr object now only needs to be held when accessing
the per-connection virError object instance. All other operations
are completely lock free.
* src/datatypes.c, src/datatypes.h, src/libvirt.c: Convert
public datatypes to use virObject
* src/conf/domain_event.c, src/phyp/phyp_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_migration.c,
src/qemu/qemu_process.c, src/storage/storage_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
tests/qemuxml2argvtest.c, tests/qemuxmlnstest.c,
tests/sexpr2xmltest.c, tests/xmconfigtest.c: Convert
to use virObjectUnref/virObjectRef
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the legacy Xen drivers to use virReportError instead of
the statsError, virXenInotifyError, virXenStoreError,
virXendError, xenUnifiedError, xenXMError custom macros
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
On newer xend (v3.x and after) there is no state and domid reported
for inactive domains. When initially creating connections this is
handled in various places by assigning domain->id = -1.
But once an instance has been running, the id is set to the current
domain id. And it does not change when the instance is shut down.
So when querying the domain info, the hypervisor driver, which gets
asked first will indicate it cannot find information, then the
xend driver is asked and will set the status to NOSTATE because it
checks for the -1 domain id.
Checking domain/status for 0 seems to be more reliable for that.
One note: I am not sure whether the domain->id also should get set
back to -1 whenever any sub-driver thinks the instance is no longer
running.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=746007
BugLink: http://bugs.launchpad.net/bugs/929626
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
