For dead domains that have no memtune limits, we return 0 instead of
"unlimited", this patch fixes it to return PARAM_UNLIMITED.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1035108
When attempting to enable more vCPUs in the guest than is currently
enabled in the guest but less than the maximum count for the VM we
currently reported an unhelpful message:
error: internal error: guest agent reports less cpu than requested
This patch changes it to:
error: invalid argument: requested vcpu count is greater than the count
of enabled vcpus in the domain: 3 > 2
Ever since the subcpusets(vcpu,emulator) were introduced, the parent
cpuset cannot be modified to remove the nodes that are in use by the
subcpusets.
The fix is to break the memory node modification into three steps:
1. assign new nodes into the parent,
2. change the nodes in the child nodes,
3. remove the old nodes on the parent node.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1009880
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1035188
Commit f094aaac48 changed the PCI device assignment in qemu domains
to default to using VFIO rather than legacy KVM device assignment
(when VFIO is available). It didn't change which driver was used by
default for virNodeDeviceDetachFlags(), though, so that API (and the
virsh nodedev-detach command) was still binding to the pci-stub
driver, used by legacy KVM assignment, by default.
This patch publicizes (only within the qemu module, though, so no
additions to the symbol exports are needed) the functions that check
for presence of KVM and VFIO device assignment, then uses those
functions to decide what to do when no driver is specified for
virNodeDeviceDetachFlags(); if the vfio driver is loaded, the device
will be bound to vfio-pci, or if legacy KVM assignment is supported on
this system, the device will be bound to pci-stub; if neither method
is available, the detach will fail.
Currently the snapshot code did not check if it actually supports
snapshots on various disk backends for domains. To avoid future problems
add checkers that whitelist the supported configurations.
When doing an internal snapshot on a VM with sheepdog or RBD disks we
would not set a flag to mark the domain is using internal snapshots and
might end up creating a mixed snapshot. Move the setting of the variable
to avoid this problem.
The virsh command 'domxml-to-native' (virConnectDomainXMLToNative())
converts all network devices to "type='ethernet'" in order to make it
more likely that the generated command could be run directly from a
shell (other libvirt network device types end up referencing file
descriptors for tap devices assumed to have been created by libvirt,
which can't be done in this case).
During this conversion, all of the netdev parameters are cleared out,
then specific items are filled in after changing the type. The MAC
address was not one of these preserved items, and the result was that
mac addresses in the generated commandlines were always
00:00:00:00:00:00.
This patch saves the mac address before the conversion, then
repopulates it afterwards, so the proper mac addresses show up in the
commandline.
Signed-off-by: Bing Bu Cao <mars@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
For attach/detach of controller devices, we rename the functions to
remove 'PCI' from their title. The actual separation of PCI-specific
operations will be handled in the next patch.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/qemu/qemu_cgroup.c: Consistently use commas.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/qemu/qemu_monitor.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
If the managedsave image is corrupted, e.g. the XML part is, we fail to
parse it and throw an error, e.g.:
error: Failed to start domain jms8
error: XML error: missing security model when using multiple labels
This is okay, as we can't really start the machine and avoid undefined
qemu behaviour. On the other hand, the error message doesn't give a
clue to users what should they do. The consensus here would be to thrown
a warning to logs saying "Hey, you've got a corrupted file".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The following sequence
1. Define a persistent QMEU guest
2. Start the QEMU guest
3. Stop libvirtd
4. Kill the QEMU process
5. Start libvirtd
6. List persistent guests
At the last step, the previously running persistent guest
will be missing. This is because of a race condition in the
QEMU driver startup code. It does
1. Load all VM state files
2. Spawn thread to reconnect to each VM
3. Load all VM config files
Only at the end of step 3, does the 'virDomainObjPtr' get
marked as "persistent". There is therefore a window where
the thread reconnecting to the VM will remove the persistent
VM from the list.
The easy fix is to simply switch the order of steps 2 & 3.
In addition to this though, we must only attempt to reconnect
to a VM which had a non-zero PID loaded from its state file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1019053
When we migrate vms concurrently, there's a chance that libvirtd on
destination assigns the same port for different migrations, which will
lead to migration failure during prepare phase on destination. So we use
virPortAllocator here to solve the problem.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/qemu.
* src/qemu/qemu_bridge_filter.h (networkAllowMacOnPort)
(networkDisallowMacOnPort): Use intended type.
* src/qemu/qemu_bridge_filter.c (networkAllowMacOnPort)
(networkDisallowMacOnPort): Likewise.
* src/qemu/qemu_command.c (qemuBuildTPMBackendStr)
(qemuBuildTPMDevStr, qemuBuildCpuArgStr)
(qemuBuildObsoleteAccelArg, qemuBuildMachineArgStr)
(qemuBuildSmpArgStr, qemuBuildNumaArgStr): Likewise.
* src/qemu/qemu_conf.c (qemuSharedDeviceEntryCopy): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSaveImageStartVM): Likewise.
* src/qemu/qemu_hostdev.c
(qemuDomainHostdevNetConfigVirtPortProfile): Likewise.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONAttachCharDevCommand): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The regular save image code has the support to compress images using a
specified algorithm. This was not implemented for external checkpoints
although it shares most of the backend code.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1017227
The regular save image code has the support to compress images using a
specified algorithm. This was not implemented for managed save although
it shares most of the backend code.
This configuration knob is there to override default listen address for
-incoming for all qemu domains.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=994364
Whenever we check for ABI stability, we have new xml (e.g. provided by
user, or obtained from snapshot, whatever) which we compare to old xml
and see if ABI won't break. However, if the new xml was produced via
virDomainGetXMLDesc(..., VIR_DOMAIN_XML_MIGRATABLE) it lacks some
devices, e.g. 'pci-root' controller. Hence, the ABI stability check
fails even though it is stable. Moreover, we can't simply fix
virDomainDefCheckABIStability because removing the correct devices is
task for the driver. For instance, qemu driver wants to remove the usb
controller too, while LXC driver doesn't. That's why we need special
qemu wrapper over virDomainDefCheckABIStability which removes the
correct devices from domain XML, produces MIGRATABLE xml and calls the
check ABI stability function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virConnectPtr is passed around loads of nwfilter code in
order to provide it as a parameter to the callback registered
by the virt drivers. None of the virt drivers use this param
though, so it serves no purpose.
Avoiding the need to pass a virConnectPtr means that the
nwfilterStateReload method no longer needs to open a bogus
QEMU driver connection. This addresses a race condition that
can lead to a crash on startup.
The nwfilter driver starts before the QEMU driver and registers
some callbacks with DBus to detect firewalld reload. If the
firewalld reload happens while the QEMU driver is still starting
up though, the nwfilterStateReload method will open a connection
to the partially initialized QEMU driver and cause a crash.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1011330 (case A)
While activeScsiHostdevs and webSocketPorts were allocated in
qemuStateInitialize, they were not freed in qemuStateCleanup.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The return value of virDomainControllerFind >=0 means that
the specific controller was found.
But some functions invoke it and treat 0 as not found.
This patch fix these incorrect invocation.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
virDomainSetBlockIoTuneEnsureACL was incorrectly called after we already
started a job. As a result of this, the job was not cleaned up when an
access driver had forbidden the action.
If the ABI compatibility check with the "migratable" user XML is
successful, we would leak the originally parsed XML from the user that
would not be used in this case.
Reported by Ján Tomko.
The function implemented common behavior that can be reused for other
hypervisor drivers that use the virDomainObj data structures. Factor out
the core into a separate helper func.
The function implemented common behavior that can be reused for other
hypervisor drivers that use the virDomainObj data structures. Factor out
the core into a separate helper func.
In the original implementation of external checkpoints I've mistakenly
used the live definition to be stored in the save image. The normal
approach is to use the "migratable" definition. This was discovered when
commit 07966f6a8b changed the behavior to
use a converted XML from the user to do the compatibility check to fix
problem when using the regular machine saving.
As the previous patch added a compatibility layer, we can now change the
type of the XML in the image.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1008340
External checkpoints have a bug in the implementation where they use the
normal definition instead of the "migratable" one. This causes errors
when the snapshot is being reverted using the workaround method via
qemuDomainRestoreFlags() with a custom XML. This issue was introduced
when commit 07966f6a8b changed the code to
compare "migratable" XMLs from the user as we should have used
migratable in the image too.
This patch adds a compatibility layer, so that fixing the snapshot code
won't make existing snapshots fail to load.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1008340
When reverting a live internal snapshot with a live guest the ABI
compatiblity check was comparing a "migratable" definition with a normal
one. This resulted in the check failing with:
revert requires force: Target device address type none does not match source pci
This patch generates a "migratable" definition from the actual one to
check against the definition from the snapshot to avoid this problem.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1006886
Osier Yang pointed out that ever since commit 31cb030, the
signature of qemuDomainObjEndJob was changed to return a bool.
While comparison against 0 or > 0 still gives the right results,
it looks fishy; we also had one place that was comparing < 0
which is effectively dead code.
* src/qemu/qemu_migration.c (qemuMigrationPrepareAny): Fix dead
code bug.
(qemuMigrationBegin): Use more canonical form of bool check.
* src/qemu/qemu_driver.c (qemuAutostartDomain)
(qemuDomainCreateXML, qemuDomainSuspend, qemuDomainResume)
(qemuDomainShutdownFlags, qemuDomainReboot, qemuDomainReset)
(qemuDomainDestroyFlags, qemuDomainSetMemoryFlags)
(qemuDomainSetMemoryStatsPeriod, qemuDomainInjectNMI)
(qemuDomainSendKey, qemuDomainGetInfo, qemuDomainScreenshot)
(qemuDomainSetVcpusFlags, qemuDomainGetVcpusFlags)
(qemuDomainRestoreFlags, qemuDomainGetXMLDesc)
(qemuDomainCreateWithFlags, qemuDomainAttachDeviceFlags)
(qemuDomainUpdateDeviceFlags, qemuDomainDetachDeviceFlags)
(qemuDomainBlockResize, qemuDomainBlockStats)
(qemuDomainBlockStatsFlags, qemuDomainMemoryStats)
(qemuDomainMemoryPeek, qemuDomainGetBlockInfo)
(qemuDomainAbortJob, qemuDomainMigrateSetMaxDowntime)
(qemuDomainMigrateGetCompressionCache)
(qemuDomainMigrateSetCompressionCache)
(qemuDomainMigrateSetMaxSpeed)
(qemuDomainSnapshotCreateActiveInternal)
(qemuDomainRevertToSnapshot, qemuDomainSnapshotDelete)
(qemuDomainQemuMonitorCommand, qemuDomainQemuAttach)
(qemuDomainBlockJobImpl, qemuDomainBlockCopy)
(qemuDomainBlockCommit, qemuDomainOpenGraphics)
(qemuDomainGetBlockIoTune, qemuDomainGetDiskErrors)
(qemuDomainPMSuspendForDuration, qemuDomainPMWakeup)
(qemuDomainQemuAgentCommand, qemuDomainFSTrim): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Failure to attach to a domain during 'virsh qemu-attach' left
the list of domains in an odd state:
$ virsh qemu-attach 4176
error: An error occurred, but the cause is unknown
$ virsh list --all
Id Name State
----------------------------------------------------
2 foo shut off
$ virsh qemu-attach 4176
error: Requested operation is not valid: domain is already active as 'foo'
$ virsh undefine foo
error: Failed to undefine domain foo
error: Requested operation is not valid: cannot undefine transient domain
$ virsh shutdown foo
error: Failed to shutdown domain foo
error: invalid argument: monitor must not be NULL
It all stems from leaving the list of domains unmodified on
the initial failure; we should follow the lead of createXML
which removes vm on failure (the actual initial failure still
needs to be fixed in a later patch, but at least this patch
gets us to the point where we aren't getting stuck with an
unremovable "shut off" transient domain).
While investigating, I also found a leak in qemuDomainCreateXML;
the two functions should behave similarly. Note that there are
still two unusual paths: if dom is not allocated, the user will
see an OOM error even though the vm remains registered (but oom
errors already indicate tricky cleanup); and if the vm starts
and then quits again all before the job ends, it is possible
to return a non-NULL dom even though the dom will no longer be
useful for anything (but this at least lets the user know their
short-lived vm ran).
* src/qemu/qemu_driver.c (qemuDomainCreateXML): Don't leak vm on
failure to obtain job.
(qemuDomainQemuAttach): Match cleanup of qemuDomainCreateXML.
Signed-off-by: Eric Blake <eblake@redhat.com>
The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=999352
Since commit v1.0.5-56-g449e6b1 (Pull parsing of migration xml up into
QEMU driver APIs) any attempt to rename a domain during migration fails
with the following error message:
internal error Incoming cookie data had unexpected name DOM vs DOM2
This is because migration cookies always use the original domain name
and the mentioned commit failed to propagate the name back to
qemuMigrationPrepareAny.
When cpu hotplug fails without reporting an error, we would fail the
command but update the count of vCPUs anyways.
Commit 761fc48136 fixed the case when CPU
hot-unplug failed silently, but forgot to fix up the value in this case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1000357
The virDomainOpenGraphics method accepts a UNIX socket FD from
the client app. It must set the label on this FD otherwise QEMU
will be prevented from receiving it with recvmsg.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Re-arrange the code so that the returned bitmap is always initialized to
NULL even on early failures and return an error message as some callers
are already expecting it. Fix up the rest not to shadow the error.
Currently the virConnectBaselineCPU API does not expose the CPU features
that are part of the CPU's model. This patch adds a new flag,
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES, that causes the API to explicitly
list all features that are part of that model.
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Function qemuOpenFile() haven't had any idea about seclabels applied
to VMs only, so in case the seclabel differed from the "user:group"
from configuration, there might have been issues with opening files.
Make qemuOpenFile() VM-aware, but only optionally, passing NULL
argument means skipping VM seclabel info completely.
However, all current qemuOpenFile() calls look like they should use VM
seclabel info in case there is any, so convert these calls as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=869053
Due to a goto statement missed when refactoring in 2771f8b74c
when acquiring of a domain job failed the error path was not taken. This
resulted into a crash afterwards as an extra reference was removed from a
domain object leading to it being freed. An attempt to list the domains
leaded to a crash of the daemon afterwards.
https://bugzilla.redhat.com/show_bug.cgi?id=928672
Convert the remaining methods in vircgroup.c to report errors
instead of returning errno values.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In case libvirtd is asked to unplug a device but the device is actually
unplugged later when libvirtd is not running, we need to detect that and
remove such device when libvirtd starts again and reconnects to running
domains.
Implement the new API that will handle setting the balloon driver statistics
collection period in order to enable or disable the collection dynamically.
If users haven't configured guest agent then qemuAgentCommand() will
dereference a NULL 'mon' pointer, which causes crash of libvirtd when
using agent based cpu (un)plug.
With the patch, when the qemu-ga service isn't running in the guest,
a expected error "error: Guest agent is not responding: Guest agent
not available for now" will be raised, and the error "error: argument
unsupported: QEMU guest agent is not configured" is raised when the
guest hasn't configured guest agent.
GDB backtrace:
(gdb) bt
#0 virNetServerFatalSignal (sig=11, siginfo=<value optimized out>, context=<value optimized out>) at rpc/virnetserver.c:326
#1 <signal handler called>
#2 qemuAgentCommand (mon=0x0, cmd=0x7f39300017b0, reply=0x7f394b090910, seconds=-2) at qemu/qemu_agent.c:975
#3 0x00007f39429507f6 in qemuAgentGetVCPUs (mon=0x0, info=0x7f394b0909b8) at qemu/qemu_agent.c:1475
#4 0x00007f39429d9857 in qemuDomainGetVcpusFlags (dom=<value optimized out>, flags=9) at qemu/qemu_driver.c:4849
#5 0x00007f3957dffd8d in virDomainGetVcpusFlags (domain=0x7f39300009c0, flags=8) at libvirt.c:9843
How to reproduce?
# To start a guest without guest agent configuration
# then run the following cmdline
# virsh vcpucount foobar --guest
error: End of file while reading data: Input/output error
error: One or more references were leaked after disconnect from the hypervisor
error: Failed to reconnect to the hypervisor
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=984821
Signed-off-by: Alex Jia <ajia@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
There are two levels on which a device may be hotplugged: config
and live. The config level requires just an insert or remove from
internal domain definition structure, which is exactly what this
patch does. There is currently no implementation for a chardev
update action, as there's not much to be updated. But more
importantly, the only thing that can be updated is path or socket
address by which chardevs are distinguished. So the update action
is currently not supported.
With current code, error reporting for unsupported devices for hot plug,
unplug and update is total mess. The VIR_ERR_CONFIG_UNSUPPORTED error
code is reported instead of VIR_ERR_OPERATION_UNSUPPORTED. Moreover, the
error messages are not helping to find the root cause (lack of
implementation).
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add monitor callback API domainGuestPanic, that implements
'destroy', 'restart' and 'preserve' events of the 'on_crash'
in the XML when domain crashed.
After abf75aea24 the compiler screams:
qemu/qemu_driver.c: In function 'qemuNodeDeviceDetachFlags':
qemu/qemu_driver.c:10693:9: error: 'domain' may be used uninitialized in this function [-Werror=maybe-uninitialized]
pci = virPCIDeviceNew(domain, bus, slot, function);
^
qemu/qemu_driver.c:10693:9: error: 'bus' may be used uninitialized in this function [-Werror=maybe-uninitialized]
qemu/qemu_driver.c:10693:9: error: 'slot' may be used uninitialized in this function [-Werror=maybe-uninitialized]
qemu/qemu_driver.c:10693:9: error: 'function' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Since the other functions qemuNodeDeviceReAttach and qemuNodeDeviceReset
looks exactly the same, I've initialized the variables there as well.
However, I am still wondering why those functions don't matter to gcc
while the first one does.
The driver arg to virPCIDeviceDetach is no longer used (the name of the stub driver is now set in the virPCIDevice object, and virPCIDeviceDetach retrieves it from there). Remove it.
virPCIDeviceDetach would previously sometimes consume the input device
object (to put it on the inactive list) and sometimes not. Avoiding
memory leaks required checking beforehand to see if the device was
already on the list, and freeing the device object in the caller only
if there wasn't already an identical object on the inactive list.
This patch makes it consistent - virPCIDeviceDetach will *never*
consume the input virPCIDevice object; if it needs to put one on the
inactive list, it will create a copy and put *that* on the list. This
way the caller knows that it is always their responsibility to free
the device object they created.
Previously stubDriver was always set from a string literal, so it was
okay to use a const char * that wasn't freed when the virPCIDevice was
freed. This will not be the case in the near future, so it is now a
char* that is allocated in virPCIDeviceSetStubDriver() and freed
during virPCIDeviceFree().
As a consequence of the cgroup layout changes from commit '632f78ca', the
qemuDomainGetSchedulerParameters[Flags]()' and qemuGetSchedulerType() APIs
failed to return data for a non running domain. This can be seen through
a 'virsh schedinfo <domain>' command which returns:
Scheduler : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted
Prior to that change a non running domain would return:
Scheduler : posix
cpu_shares : 0
vcpu_period : 0
vcpu_quota : 0
emulator_period: 0
emulator_quota : 0
This patch will restore the capability to return configuration only data
for a non running domain regardless of whether cgroups are available.
Paolo Bonzini pointed out that it's actually possible to migrate a qemu
instance that was paused due to I/O error and it will be able to work on
the destination if the storage is accessible.
This patch introduces flag VIR_MIGRATE_ABORT_ON_ERROR that cancels the
migration in case an I/O error happens while it's being performed and
allows migration without this flag. This flag can be possibly used for
other error reasons that may be introduced in the future.
Convert input XML to migratable before using it in
qemuDomainSaveImageOpen.
XML in the save image is migratable, i.e. doesn't contain implicit
controllers. If these controllers were in a non-default order in the
input XML, the ABI check would fail. Removing and re-adding these
controllers fixes it.
https://bugzilla.redhat.com/show_bug.cgi?id=834196
This patch fixes changes done in commit 29c1e913e4
that was pushed without implementing review feedback.
The flag introduced by the patch is changed to VIR_DOMAIN_VCPU_GUEST and
documentation makes the difference between regular hotplug and this new
functionality more explicit.
The virsh options that enable the use of the new flag are changed to
"--guest" and the documentation is fixed too.
Currently, there's a path to use the ncpuinfo variable uninitialized,
which leads to a compiler warning:
qemu/qemu_driver.c: In function 'qemuDomainGetVcpusFlags':
qemu/qemu_driver.c:4573:9: error: 'ncpuinfo' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
for (i = 0; i < ncpuinfo; i++) {
^
The work was done at the time of snapshot xmlstring parsing
if (offline && def->memory &&
def->memory != VIR_DOMAIN_SNAPSHOT_LOCATION_NONE) {
virReportError(...);
}
If snapshot creation failed for example due to invalid use of the
"REUSE_EXTERNAL" flag, libvirt killed access to the original image file
instead of the new image file. On machines with selinux this kills the
whole VM as the selinux context is enforced immediately.
* qemu_driver.c:qemuDomainSnapshotUndoSingleDiskActive():
- Kill access to the new image file instead of the old one.
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=906639
This is a recurring problem for cygwin :)
For example, see commit 23a4df88.
qemu/qemu_driver.c: In function 'qemuStateInitialize':
qemu/qemu_driver.c:691:13: error: format '%d' expects type 'int', but argument 8 has type 'uid_t' [-Wformat]
* src/qemu/qemu_driver.c (qemuStateInitialize): Add casts.
* daemon/remote.c (remoteDispatchAuthList): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Function qemuDomainSetBlockIoTune() was checking QEMU capabilities
even when !(flags & VIR_DOMAIN_AFFECT_LIVE) and the domain was
shutoff, resulting in the following problem:
virsh # domstate asdf; blkdeviotune asdf vda --write-bytes-sec 100
shut off
error: Unable to change block I/O throttle
error: unsupported configuration: block I/O throttling not supported with this QEMU binary
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=965016
Since 0d70656afd, it starts to access the sysfs files to build
the qemu command line (by virSCSIDeviceGetSgName, which is to find
out the scsi generic device name by adpater🚌target:unit), there
is no way to work around, qemu wants to see the scsi generic device
like "/dev/sg6" anyway.
And there might be other places which need to access sysfs files
when building qemu command line in future.
Instead of increasing the arguments of qemuBuildCommandLine, this
introduces a new callback for qemuBuildCommandLine, and thus tests
can register their own callbacks for sysfs test input files accessing.
* src/qemu/qemu_command.h: (New callback struct
qemuBuildCommandLineCallbacks;
extern buildCommandLineCallbacks)
* src/qemu/qemu_command.c: (wire up the callback struct)
* src/qemu/qemu_driver.c: (Use the new syntax of qemuBuildCommandLine)
* src/qemu/qemu_hotplug.c: Likewise
* src/qemu/qemu_process.c: Likewise
* tests/testutilsqemu.[ch]: (Helper testSCSIDeviceGetSgName;
callback struct testCallbacks;)
* tests/qemuxml2argvtest.c: (Use testCallbacks)
* src/tests/qemuxmlnstest.c: (Like above)
Commit 632f78c introduced a regression which causes schedinfo being
unable to set some parameters. When migrating to priv->cgroup there
was missing variable left out and due to passed NULL to underlying
function, the setting failed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=963592
This changes the helpers qemu{Add,Remove}SharedDisk into
qemu{Add,Remove}SharedDevice, as most of the code in the helpers
can be reused for scsi host device.
To track the shared scsi host device, first it finds out the
device path (e.g. /dev/s[dr]*) which is mapped to the sg device,
and use device ID of the found device path (/dev/s[dr]*) as the
hash key. This is because of the device ID is not unique between
between /dev/s[dr]* and /dev/sg*, e.g.
% sg_map
/dev/sg0 /dev/sda
/dev/sg1 /dev/sr0
% ls -l /dev/sda
brw-rw----. 1 root disk 8, 0 May 2 19:26 /dev/sda
%ls -l /dev/sg0
crw-rw----. 1 root disk 21, 0 May 2 19:26 /dev/sg0
"Shared disk" is not only the thing we should care about after "scsi
hostdev" is introduced. A same scsi device can be used as "disk" for
one domain, and as "scsi hostdev" for another domain at the same time.
That's why this patch renames qemu_driver->sharedDisks. Related functions
and structs are also renamed.
Adding a VNC WebSocket support for QEMU driver. This functionality is
in upstream qemu from commit described as v1.3.0-982-g7536ee4, so the
capability is being recognized based on QEMU version for now.
Although virtio-scsi supports SCSI PR (Persistent Reservations),
the device on host may do not support it. To avoid losing data,
Just like PCI and USB pass through devices, only one live guest
is allowed per SCSI host pass through device."
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
It is possible to build a kernel without swap cgroup controls
present. This causes a fatal error when querying memory
parameters. Treat missing swap controls as meaning "unlimited".
The fatal error remains if the user tries to actually change
the limit.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=851411https://bugzilla.redhat.com/show_bug.cgi?id=955500
The first problem was that virFileOpenAs was returning fd (-1) in one
of the error cases rather than ret (-errno), so the caller thought
that the error was EPERM rather than ENOENT.
The second problem was that some log messages in the general purpose
qemuOpenFile() function would always say "Failed to create" even if
the caller hadn't included O_CREAT (i.e. they were trying to open an
existing file).
This fixes virFileOpenAs to jump down to the error return (which
returns ret instead of fd) in the previously mentioned incorrect
failure case of virFileOpenAs(), removes all error logging from
virFileOpenAs() (since the callers report it), and modifies
qemuOpenFile to appropriately use "open" or "create" in its log
messages.
NB: I seriously considered removing logging from all callers of
virFileOpenAs(), but there is at least one case where the caller
doesn't want virFileOpenAs() to log any errors, because it's just
going to try again (qemuOpenFile()). We can't simply make a silent
variation of virFileOpenAs() though, because qemuOpenFile() can't make
the decision about whether or not it wants to retry until after
virFileOpenAs() has already returned an error code.
Likewise, I also considered changing virFileOpenAs() to return -1 with
errno set on return, and may still do that, but only as a separate
patch, as it obscures the intent of this patch too much.
The LXC, QEMU, and LibXL drivers have all merged their handling of
the attach/update/modify device APIs into one large
'xxxxDomainModifyDeviceFlags'
which then does a 'switch()' based on the actual API being invoked.
While this saves some lines of code, it is not really all that
significant in the context of the driver API impls as a whole.
This merger of the handling of different APIs creates pain when
wanting to automated analysis of the code and do things which
are specific to individual APIs. The slight duplication of code
from unmerged the API impls, is preferrable to allow for easier
automated analysis.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the parsing of XML is pushed down into the various
migration helper APIs. This makes it difficult to insert the
correct access control checks, since one helper API services
many public APIs. Pull the parsing of XML up to the top level
of the QEMU driver APIs
The individual hypervisor drivers were directly referencing
APIs in virnodesuspend.c in their virDriverPtr struct. Separate
these methods, so there is always a wrapper in the hypervisor
driver. This allows the unused virConnectPtr args to be removed
from the virnodesuspend.c file. Again this will ensure that
ACL checks will only be performed on invocations that are
directly associated with public API usage.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The individual hypervisor drivers were directly referencing
APIs in src/nodeinfo.c in their virDriverPtr struct. Separate
these methods, so there is always a wrapper in the hypervisor
driver. This allows the unused virConnectPtr args to be
removed from the nodeinfo.c file. Again this will ensure that
ACL checks will only be performed on invocations that are
directly associated with public API usage.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virGetHostname() API has a bogus virConnectPtr
parameter. This is because virtualization drivers directly
reference this API in their virDriverPtr tables, tieing its
API design to the public virConnectGetHostname API design.
This also causes problems for access control checks since
these must only be done for invocations from the public
API, not internal invocation.
Remove the bogus virConnectPtr parameter, and make each
hypervisor driver provide a dedicated function for the
driver API impl. This will allow access control checks
to be easily inserted later.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When attempting to generate the native command line from an XML file
that uses graphics port auto allocation, the generated commandline
wouldn't be valid.
This patch adds fake autoallocation of ports as done when starting the
actual machine.
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
virPCIDeviceReattach and virPCIDeviceUnbindFromStub (called by
virPCIDeviceReattach) had previously required the name of the stub
driver as input. This is unnecessary, because the name of the driver
the device is currently bound to can be found by looking at the link:
/sys/bus/pci/dddd:bb:ss.ff/driver
Instead of requiring that the name of the expected stub driver name
and only unbinding if that one name is matched, we no longer take a
driver name in the arglist for either of these
functions. virPCIDeviceUnbindFromStub just compares the name of the
currently bound driver to a list of "well known" stubs (right now
contains "pci-stub" and "vfio-pci" for qemu, and "pciback" for xen),
and only performs the unbind if it's one of those devices.
This allows virsh nodedevice-reattach to work properly across a
libvirtd restart, and fixes a couple of cases where we were
erroneously still hard-coding "pci-stub" as the drive name.
For some unknown reason, virPCIDeviceReattach had been calling
modprobe on the stub driver prior to unbinding the device. This was
problematic because we no longer know the name of the stub driver in
that function. However, it is pointless to probe for the stub driver
at that time anyway - because the device is bound to the stub driver,
we are guaranteed that it is already loaded, and so that call to
modprobe has been removed.
The differences from virNodeDeviceDettach are very minor:
1) Check that the flags are 0.
2) Set the virPCIDevice's stubDriver according to the driverName that
is passed in.
3) Call virPCIDeviceDetach with a NULL stubDriver, indicating it
should get the name of the stub driver from the virPCIDevice
object.
Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.
eg for the public API virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Refactoring done in 19c6ad9ac7 didn't
correctly take into account the order cgroup limit modification needs to
be done in. This resulted into errors when decreasing the limits.
The operations need to take place in this order:
decrease hard limit
change swap hard limit
or
change swap hard limit
increase hard limit
This patch also fixes the check if the hard_limit is less than
swap_hard_limit to print better error messages. For this purpose I
introduced a helper function virCompareLimitUlong to compare limit
values where value of 0 is equal to unlimited. Additionally the check is
now applied also when the user does not provide all of the tunables
through the API and in that case the currently set values are used.
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=950478
Wrong use of the parentheses causes "rc" always having a boolean value,
either "1" or "0", and thus we can't get the detailed error message
when it fails:
Before (I only have 1 node):
% virsh numatune f18 --nodeset 12
error: Unable to change numa parameters
error: unable to set numa tunable: Unknown error -1
After:
virsh numatune f18 --nodeset 12
error: Unable to change numa parameters
error: unable to set numa tunable: Invalid argument
Detected by a simple Shell script:
for i in $(git ls-files -- '*.[ch]'); do
awk 'BEGIN {
fail=0
}
/# *include.*\.h/{
match($0, /["<][^">]*[">]/)
arr[substr($0, RSTART+1, RLENGTH-2)]++
}
END {
for (key in arr) {
if (arr[key] > 1) {
fail=1
printf("%d %s\n", arr[key], key)
}
}
if (fail == 1)
exit 1
}' $i
if test $? != 0; then
echo "Duplicate header(s) in $i"
fi
done;
A later patch will add the syntax-check to avoid duplicate
headers.
Rename all the virCgroupForXXX methods to use the form
virCgroupNewXXX since they are all constructors. Also
make sure the output parameter is the last one in the
list, and annotate all pointers as non-null. Fix up
all callers, and make sure they use true/false not 0/1
for the boolean parameters
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of calling virCgroupForDomain every time we need
the virCgrouPtr instance, just do it once at Vm startup
and cache a reference to the object in qemuDomainObjPrivatePtr
until shutdown of the VM. Removing the virCgroupPtr from
the QEMU driver state also means we don't have stale mount
info, if someone mounts the cgroups filesystem after libvirtd
has been started
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Report the errors as:
Domain not found: no domain with matching uuid '41414141-4141-4141-4141-414141414141' (crashtest)
instead of:
Domain not found: no domain with matching uuid '41414141-4141-4141-4141-414141414141'
Use the helper to lookup the domain object in the remaining places.
This patch also fixes error reporting when the domain was not found in several
functions that were printing the raw UUID buffer instead of the formatted
string. The offending functions were:
qemuDomainGetInterfaceParameters
qemuDomainSetInterfaceParameters
qemuGetSchedulerParametersFlags
qemuSetSchedulerParametersFlags
qemuDomainGetNumaParameters
qemuDomainSetNumaParameters
qemuDomainGetMemoryParameters
qemuDomainSetMemoryParameters
qemuDomainGetBlkioParameters
qemuDomainSetBlkioParameters
qemuDomainGetCPUStats
To support "shareable" for volume type disk, we have to translate
the source before trying to add the shared disk entry. To achieve
the goal, this moves the helper qemuTranslateDiskSourcePool into
src/qemu/qemu_conf.c, and introduce an internal only member (voltype)
for struct _virDomainDiskSourcePoolDef, to record the underlying
volume type for use when building the drive string.
Later patch will support "shareable" volume type disk.
For both "live" and "config" changes of vcpupin and emulatorpin, an
all clear bitmap doesn't make sense, and it can just cause corruptions.
E.g (similar for emulatorpin).
% virsh vcpupin hame 0 8,^8 --config
% virsh vcpupin hame
VCPU: CPU Affinity
----------------------------------
0:
1: 0-63
2: 0-63
3: 0-63
% virsh dumpxml hame | grep cpuset
<vcpupin vcpu='0' cpuset=''/>
% virsh start hame
error: Failed to start domain hame
error: An error occurred, but the cause is unknown
When setting processor count for a domain using the API libvirt enforced
a maximum processor count, while it isn't enforced when taking the XML path.
This patch removes the check to match the XML.
Currently when getting an instance of virCgroupPtr we will
create the path in all cgroup controllers. Only at the virt
driver layer are we attempting to filter controllers. This
is bad because the mere act of creating the dirs in the
controllers can have a functional impact on the kernel,
particularly for performance.
Update the virCgroupForDriver() method to accept a bitmask
of controllers to use. Only create dirs in the controllers
that are requested. When creating cgroups for domains,
respect the active controller list from the parent cgroup
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch removes the defaultDiskDriverName from the virCaps
structure. This particular default value is used only in the qemu driver
so this patch uses the recently added callback to fill the driver name
if it's needed instead of propagating it through virCaps.
This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.
With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.
Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
- called for a single device parsed and for every single device in a
domain config. A virDomainDeviceDefPtr is passed along with the
domain definition and virCaps.
* virDomainDefPostParseCallback, (domainPostParseCallback)
- A callback that is meant to process the domain config after it's
parsed. A virDomainDefPtr is passed along with virCaps.
Both types of callbacks support arbitrary opaque data passed for the
callback functions.
Errors may be reported in those callbacks resulting in a XML parsing
failure.
This patch is the result of running:
for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done
and a few manual tweaks.
Mimic the fix done in 02b9097274 to fix crash by
accessing an already freed structure. Also copy the explaining comment why the
pointer can't be accessed any more.
The VIR_ERR_NO_SUPPORT error code is reserved for cases where an
API is not implemented in a driver. It definitely should not be
used when an API execution fails due to unsupported operation.
We should record the new disk src in the shared disk table for
updating disk (CD-ROM or Floppy) API. Fortunately, we only allow
to update the disk source now, otherwise we might also want to
set the unpriv_sgio setting.
Intend to reduce the redundant code,use virNumaSetupMemoryPolicy
to replace virLXCControllerSetupNUMAPolicy and
qemuProcessInitNumaMemoryPolicy.
This patch also moves the numa related codes to the
file virnuma.c and virnuma.h
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
We didn't yet expose the virtio device attach and detach functionality
for s390 domains as the device hotplug was very limited with the old
virtio-s390 bus. With the CCW bus there's full hotplug support for
virtio devices in QEMU, so we are adding this to libvirt too.
Since the virtio hotplug isn't limited to PCI anymore, we change the
function names from xxxPCIyyy to xxxVirtioyyy, where we handle all
three virtio bus types.
Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
With our recent patch (1715c83b5f) we thrive to get the correct
number of maximal VCPUs. However, we are using a constant from
linux/kvm.h which may be not defined in every distro. Hence, we
should guard usage of the constant with ifdef preprocessor
directive. This was introduced in kernel:
commit 8c3ba334f8588e1d5099f8602cf01897720e0eca
Author: Sasha Levin <levinsasha928@gmail.com>
Date: Mon Jul 18 17:17:15 2011 +0300
KVM: x86: Raise the hard VCPU count limit
The patch raises the hard limit of VCPU count to 254.
This will allow developers to easily work on scalability
and will allow users to test high VCPU setups easily without
patching the kernel.
To prevent possible issues with current setups, KVM_CAP_NR_VCPUS
now returns the recommended VCPU limit (which is still 64) - this
should be a safe value for everybody, while a new KVM_CAP_MAX_VCPUS
returns the hard limit which is now 254.
$ git desc 8c3ba334f
v3.1-rc7-48-g8c3ba33
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.
This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:
1) Get rid of the stuff from virCaps
2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.
This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
When there are two concurrent threads, we may dereference a NULL
pointer, even though it has been checked before:
1. Thread1: starts executing qemuDomainBlockStatsFlags() with nparams != 0.
It finds given disk and successfully pass check for disk->info.alias
not being NULL.
2. Thread2: starts executing qemuDomainDetachDeviceFlags() on the very same
disk as Thread1 is working on.
3. Thread1: gets to qemuDomainObjBeginJob() where it sets a job on a
domain.
4. Thread2: also tries to set a job. However, we are not guaranteed which
thread wins. So assume it's Thread2 who can continue.
5. Thread2: does the actual detach and frees disk->info.alias
6. Thread2: quits the job
7. Thread1: now successfully acquires the job, and accesses a NULL pointer.
19c6ad9a (qemu: Refactor qemuDomainSetMemoryParameters) introduced
a new macro, VIR_GET_LIMIT_PARAMETER(PARAM, VALUE). But if statement
in the macro is not correct and so set_XXXX flags are set to false
in the wrong. As a result, libvirt ignores all memtune parameters.
This patch fixes the conditional expression to work correctly.
Signed-off-by: Satoru Moriya <satoru.moriya@hds.com>
Currently, qemuDomainShutdownFlags() chooses the agent method of
shutdown whenever the agent is configured. However, this
assumption is not enough as the guest agent may be unresponsive
at the moment. So unless guest agent method has been explicitly
requested, we should fall back to the ACPI method.
The unitialized local variable qemuVersion can cause an random value
to be returned for the hypervisor version, observable with virsh version.
Introduced by commit b46f7f4a0b
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This change tried to fix a crash with changing CDROM media but
failed to actually do so
commit d0172d2b1b
Author: Osier Yang <jyang@redhat.com>
Date: Tue Feb 19 20:27:45 2013 +0800
qemu: Remove the shared disk entry if the operation is ejecting or updating
It was still accessing disk->src, when the entire 'disk' object
has been free'd already. Even if it weren't free'd, accessing
the 'src' value of virDomainDiskDef is not allowed without
first validating disk->type is file or block. Just remove the
broken code entirely.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The new TypedParam helper APIs allow to simplify this function
significantly.
This patch integrates the fix in 75e5bec97b
by correctly ordering the setting functions instead of reordering the
parameters.
To avoid having to hold the qemu driver lock while iterating through
close callbacks and calling them. This fixes a real deadlock when a
domain which is being migrated from another host gets autodestoyed as a
result of broken connection to the other host.
The max value of number of cpus to compute(id) should not
be equal or greater than max cpu number.
The bug ocurrs when id value is equal to max cpu number which
leads to the off-by-one error in the following for loop.
# virsh cpu-stats guest --start 1
error: Failed to virDomainGetCPUStats()
error: internal error cpuacct parse error
Currently, if lzop decompression binary produces a warning, it
doesn't exit with zero status but 2 instead. Terrifying, but
true. However, warnings may be ignored using '--ignore-warn'
command line argument. Moreover, in which case, the exit status
will be zero.
For both AttachDevice and UpdateDevice APIs, if the disk device
is 'cdrom' or 'floppy', the operations could be ejecting, updating,
and inserting. For either ejecting or updating, the shared disk
entry of the original disk src has to be removed, because it's
not useful anymore.
And since the original disk def will be changed, new disk def passed
as argument will be free'ed in qemuDomainChangeEjectableMedia, so
we need to copy the orignal disk def before
qemuDomainChangeEjectableMedia, to use it for qemuRemoveSharedDisk.
The disk def could be free'ed by qemuDomainChangeEjectableMedia,
which can thus cause crash if we reference the disk pointer. On
the other hand, we have to remove the added shared disk entry from
the table on error codepath.
The hash entry is changed from "ref" to {ref, @domains}. With this, the
caller can simply call qemuRemoveSharedDisk, without afraid of removing
the entry belongs to other domains. qemuProcessStart will obviously
benifit from it on error codepath (which calls qemuProcessStop to do
the cleanup).
Based on moving various checking into qemuAddSharedDisk, this
avoids the caller using it in wrong ways. Also this adds two
new checking for qemuCheckSharedDisk (disk device not 'lun'
and kernel doesn't support unpriv_sgio simply returns 0).
With the majority of fields in the virQEMUDriverPtr struct
now immutable or self-locking, there is no need for practically
any methods to be using the QEMU driver lock. Only a handful
of helper APIs in qemu_conf.c now need it
Currently the APIs for managing the shared disk list take
a virHashTablePtr as the primary argument. This is bad
because it requires the caller to deal with locking of
the QEMU driver. Switch the APIs to take the full
virQEMUDriverPtr instance
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To enable locking to be introduced to the security manager
objects later, turn virSecurityManager into a virObjectLockable
class
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'driver->caps' pointer can be changed on the fly. Accessing
it currently requires the global driver lock. Isolate this
access in a single helper, so a future patch can relax the
locking constraints.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To avoid confusion between 'virCapsPtr' and 'qemuCapsPtr'
do some renaming of various fucntions/variables. All
instances of 'qemuCapsPtr' are renamed to 'qemuCaps'. To
avoid that clashing with the 'qemuCaps' typedef though,
rename the latter to virQEMUCaps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We are requesting for stderr catching for all cases in
virFileWrapperFdNew(). There is no need to have a separate
function just to report an error, esp. when we can do it in
virFileWrapperFdClose().
Currently the activePciHostdevs, inactivePciHostdevsd and
activeUsbHostdevs lists are all implicitly protected by the
QEMU driver lock. Now that the lists all inherit from the
virObjectLockable, we can make the locking explicit, removing
the dependency on the QEMU driver lock for correctness.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow modifications to the lists to be synchronized, convert
virPCIDeviceList and virUSBDeviceList into virObjectLockable
classes. The locking, however, will not be self-contained. The
users of these classes will have to call virObjectLock/Unlock
in the critical regions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QEMU driver struct has a 'qemuVersion' field that was previously
used to cache the version lookup from capabilities. With the recent
QEMU capabilities rewrite the caching happens at a lower level so
this field is pointless. Removing it avoids worries about locking
when updating it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The duplicate VM checking should be done atomically with
virDomainObjListAdd, so shoud not be a separate function.
Instead just use flags to indicate what kind of checks are
required.
This pair, used in virDomainCreateXML:
if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, false)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
NULL)))
goto cleanup;
This pair, used in virDomainRestoreFlags:
if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, true)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
VIR_DOMAIN_OBJ_LIST_ADD_LIVE |
VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
NULL)))
goto cleanup;
This pair, used in virDomainDefineXML:
if (virDomainObjListIsDuplicate(privconn->domains, def, 0) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, false)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
0, NULL)))
goto cleanup;
As a step towards making virDomainObjList thread-safe turn it
into an opaque virObject, preventing any direct access to its
internals.
As part of this a new method virDomainObjListForEach is
introduced to replace all existing usage of virHashForEach
Currently the virQEMUDriverPtr struct contains an wide variety
of data with varying access needs. Move all the static config
data into a dedicated virQEMUDriverConfigPtr object. The only
locking requirement is to hold the driver lock, while obtaining
an instance of virQEMUDriverConfigPtr. Once a reference is held
on the config object, it can be used completely lockless since
it is immutable.
NB, not all APIs correctly hold the driver lock while getting
a reference to the config object in this patch. This is safe
for now since the config is never updated on the fly. Later
patches will address this fully.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If a decompression binary prints something to stderr, currently
it is discarded. However, it can contain useful data from
debugging POV, so we should catch it.
https://bugzilla.redhat.com/show_bug.cgi?id=894723
Currently, if qemuProcessStart() succeeds, but it's decompression
binary that returns nonzero status, we don't kill the qemu process,
but remove it from internal domain list, leaving the qemu process
hanging around totally uncontrolled.
