https://bugzilla.redhat.com/show_bug.cgi?id=1591561
For reasons I don't understand my original patch of 75f0fd5112
freed not only the chardev from domain but also the one from
passed virDomainDeviceDefPtr. This caused no troubles until now,
because those two pointers were separate, but after I've
introduced virDomainDetachDeviceAlias() they became the same
resulting in double free on detach.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We build on Fedora Rawhide, same as on the CentOS CI
environment.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we use pre-built Docker images, it's very easy
to extend our test matrix; adding CentOS 7 is a good start.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of starting from the minimal Ubuntu 18.04 base
image and installing all requirements at build time,
use a Docker image that has been specifically tailored
at building libvirt and thus already includes all
required packages.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will make further changes easier; all coverage
lost due to this will be reintroduced later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We only formatted the <sev> element when QEMU supported the feature when
in fact we should always format the element to make clear that libvirt
knows about the feature and the fact whether it is or isn't supported
depends on QEMU version, in other words if QEMU doesn't support the
feature we're going to format the following into the domain capabilities
XML:
<sev supported='no'/>
This patch also adjusts the RNG schema accordingly in order to reflect
the proposed change.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already perform a full build as part of distcheck, so
we can speed things up a bit by skipping the first
compilation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Without a proper separator, all commands in the error path
end up being interpreted as a single command, which is not
what we want.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The new name is arguably more informative, especially now
that we have MACOS_CMD and knowing that MINGW_CMD will
be introduced later on.
We still use DOCKER_CMD when calling Docker, and we assign
the actual script on a per-image basis. Having this
separation will help us when we introduce MinGW builds.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It mirrors the existing DOCKER_CMD, both in how it's defined
as part of the environment and how it's called by passing it
directly to the shell.
In addition to making the configuration more consistent, this
also allows us to move from having the macOS build script
divided into four steps, some of which have slightly different
semantics and the relationship between which is not immediately
obvious without consulting the documentation, to a single
straightforward shell invocation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
All variable parts are taken from the environment, so we
can exploit inheritance and avoid duplication. This will
become more important as we start building on additional
platforms.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Upgrading takes quite a bit of time, doesn't offer any
real value and causes a lot of grief. Let's just skip it.
We need to install xz explicitly now, since it's required
to make dist and no longer being dragged in by Python 3.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
xenParseVif() does a lot of stuff and, in order to make things cleaner,
let's split it in two new functions:
- xenParseVif(): it's a new function that keeps the old name. It's
responsible for the whole per-Vif logic from the old xenParseVif();
- xenParseVifList(): it's basically the old xenParsePCI(), but now it
just iterates over the list of Vifs, calling xenParsePCI() per each Vif.
This patch is basically preparing the ground for the future when
typesafe virConf acessors will be used.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When testing a domain XML with TPM we overwrite UNIX socket path
to mimic what qemuTPMEmulatorPrepareHost() is doing (because
*PrepareHost() functions are not called from the test). But we
are not doing it fully - we need to set the chardev's type too so
that virDomainTPMDefFree() can free the path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The query-sev-capabilities command fails if SEV is not compiled in,
even though both the command and -object sev-guest are present
in that case :/
Ignore the errors to avoid spamming the logs:
internal error: unable to execute QEMU command 'query-sev-capabilities': SEV feature is not available
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
USHRT_MAX is not good enough because the value is 65535 which specifies
the number of bits in bitmap. The allowed port range is 0-65535 so we
need to increase the number.
We could have USHRT_MAX + 1 but let's define the number explicitly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1590214
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Some identifiers use Sev, some SEV. Prefer the latter.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A common cleanup path for both the success and the error case.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Make the function prefix match the file it's in.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Free tmp even on failure.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It is only used in one place.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, this function changes node for relative XPaths but
doesn't restore the original one in case VIR_ALLOC(def) fails.
Secondly, @type is leaked. Thirdly, dh-cert and session
attributes are strdup()-ed needlessly, virXPathString already
does that so we can use the retval immediately.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The buffer is not freed anywhere. Nor in the error paths. Also
the usage virCommand with respect to buffer is very odd.
==2504== 1,100 bytes in 1 blocks are definitely lost in loss record 167 of 175
==2504== at 0x4C2CE3F: malloc (vg_replace_malloc.c:298)
==2504== by 0x4C2F1BF: realloc (vg_replace_malloc.c:785)
==2504== by 0x5D32EE2: virReallocN (viralloc.c:245)
==2504== by 0x5D37278: virBufferGrow (virbuffer.c:150)
==2504== by 0x5D3783E: virBufferVasprintf (virbuffer.c:408)
==2504== by 0x5D377A9: virBufferAsprintf (virbuffer.c:381)
==2504== by 0x57017C1: qemuBuildSevCommandLine (qemu_command.c:9707)
==2504== by 0x57030F7: qemuBuildCommandLine (qemu_command.c:10324)
==2504== by 0x575FA48: qemuProcessCreatePretendCmd (qemu_process.c:6644)
==2504== by 0x11351A: testCompareXMLToArgv (qemuxml2argvtest.c:564)
==2504== by 0x1392F7: virTestRun (testutils.c:180)
==2504== by 0x137895: mymain (qemuxml2argvtest.c:2900)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The variable points to a buffer not a domain object therefore its
current name is misleading.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adjust the documentation, parser and tests to change:
launch-security -> launchSecurity
reduced-phys-bits -> reducedPhysBits
dh-cert -> dhCert
Also fix the headline in formatdomain.html to be more generic,
and some leftover closing elements in the documentation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We have enough elements using underscores instead of camelCase,
do not bring dashes into the mix.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1588336
This API takes @source argument which tells it where to get
domain IP addresses from. However, not all sources are capable of
providing all the information we report, for instance ARP table
has no notion of IP address prefixes. Document this limitation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
And replace all calls with virObjectEventStateQueue such that:
umlDomainEventQueue(driver, event);
becomes:
virObjectEventStateQueue(driver->domainEventState, event);
And remove NULL checking from all callers.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
And replace all calls with virObjectEventStateQueue such that:
qemuDomainEventQueue(driver, event);
becomes:
virObjectEventStateQueue(driver->domainEventState, event);
And remove NULL checking from all callers.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
And replace all calls with virObjectEventStateQueue such that:
libxlDomainEventQueue(driver, event);
becomes:
virObjectEventStateQueue(driver->domainEventState, event);
And remove NULL checking from all callers.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
And replace all calls with virObjectEventStateQueue such that:
testObjectEventQueue(privconn, event);
becomes:
virObjectEventStateQueue(privconn->eventState, event);
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
At daemon startup we query logind for host PM support status. Without
a service dependency host startup can trigger libvirtd errors like:
error : virNodeSuspendSupportsTarget:336 : internal error: Cannot probe for
supported suspend types
warning : virQEMUCapsInit:949 : Failed to get host power management
capabilities
https://bugzilla.redhat.com/show_bug.cgi?id=1588288
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The base vfio has not much functionality but to provide a custom
container by opening this path.
See https://www.kernel.org/doc/Documentation/vfio.txt for more.
Systems with static hostdevs will get /dev/vfio/vfio by virt-aa-hotplug
right from the beginning. But if the guest initially had no hostdev at
all it will run into the following deny before the security module
labelling callbacks will make the actual vfio device (like /dev/vfio/93)
known.
Example of such a deny:
[ 2652.756712] audit: type=1400 audit(1491303691.719:25):
apparmor="DENIED" operation="open"
profile="libvirt-17a61b87-5132-497c-b928-421ac2ee0c8a"
name="/dev/vfio/vfio" pid=8486 comm="qemu-system-x86"
requested_mask="wr" denied_mask="wr" fsuid=64055 ouid=0
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1678322
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1775777
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The typedefs were present twice in the header file which causes failures
with some compilers, eg FreeBSD 10 CLang:
../../src/conf/domain_conf.h:2330:33: error: redefinition of typedef 'virDomainSevDef' is a C11 feature
+[-Werror,-Wtypedef-redefinition]
typedef struct _virDomainSevDef virDomainSevDef;
^
../../src/conf/domain_conf.h:145:33: note: previous definition is here
typedef struct _virDomainSevDef virDomainSevDef;
^
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As reported on https://bugs.debian.org/892431, without this rule, when launching
a QEMU KVM instance, an error occurs immediately upon launching the QEMU
process such as:
Could not open backing file: Could not open
'/var/lib/nova/instances/_base/affe96668a4c64ef380ff1c71b4caec17039080e':
Permission denied
The other instance disk images are already covered by the existing rule:
/**/disk{,.*} r
Signed-off-by: intrigeri <intrigeri@boum.org>
Use qemuMonitorTestNewFromFileFull which allows to test commands used
along with providing replies. This has two advantages:
1) It's easier to see which command was used when looking at the files
2) We check that the used commands are actually in the correct order
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Change the output of qemucapsprobe to record the commands used for
querying. This allows to easily identify which reply belongs to which
command and also will allow to test whether we use stable queries.
This change includes changing dropping of the QMP greeting from the file
and reformatting of the query and output to stdout.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The prettyfied output may sometimes contain empty lines which would
desynchonize the test monitor workers. The skipping code can be much
simplified though. Also a extract it so so that it's obvious what
it's doing and can be reused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The test file can be broken up by newlines and is automatically
concatenated back. Fix the control flow so that the concatenation code
'continues' the loop rather than branching out.
Also add an anotation to the concatenation code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
On EOF, the loop can be terminated right away since most of it is
skipped anyways and the handling of the last command is repeated after
the loop.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The test data for capabilities is obtained from two consecutive qemu
runs when the regular monitor object will be reset. Do the same for the
test monitor object which is not disposed between runs by calling
qemuMonitorResetCommandID.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemucapabilitiestest for simplicity uses one test monitor object for
simulating work of two separate inquiries of the qemu process. To allow
better testing in the future it will be required to reset the counter
so that it accurately simulates how qemu would behave.
This patch adds a private monitor API which allows to reset the counter
which will be usable only in tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since virConfGetValueBool() can return earlier, the parameter 'value'
might be not initialised properly inside this method. Another proof:
Valgrind is returning this error during the libvirtd daemon startup:
==16199== Conditional jump or move depends on uninitialised value(s)
==16199== at 0x27FFFEF4: virQEMUDriverConfigLoadFile (qemu_conf.c:809)
==16199== by 0x2807665C: qemuStateInitialize (qemu_driver.c:654)
==16199== by 0x5535428: virStateInitialize (libvirt.c:662)
==16199== by 0x12AED8: daemonRunStateInit (remote_daemon.c:802)
==16199== by 0x536DE18: virThreadHelper (virthread.c:206)
==16199== by 0x6CB36DA: start_thread (pthread_create.c:463)
==16199== by 0x6FEC88E: clone (clone.S:95)
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Formatting of 'driver' already used a separate buffer but was part of
the main function. Separate it and remove bunch of unnecessary temporary
variables.
Note that some checks are removed but they are not really necessary
anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
