There's no need to install sysconf files when init script installation
was not requested, i.e. when configured with init_script=none.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The logic to disable Ceph on 32-bit was protected by a Fedora
conditional. This is redundant as RHEL hasn't shipped any
32-bit platforms for years.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When using [virtiofs], libvirtd must launch [virtiofsd] to provide
filesystem access on the host. When a guest is configured with
virtiofs, such as:
<filesystem type='mount' accessmode='passthrough'>
<driver type='virtiofs'/>
<source dir='/path'/>
<target dir='mount_tag'/>
</filesystem>
Attempting to start the guest fails with:
internal error: virtiofsd died unexpectedly
/var/log/libvirt/qemu/$name-fs0-virtiofsd.log contains (as a single
line, wrapped below):
libvirt: error : cannot execute binary /usr/lib/qemu/virtiofsd:
Permission denied
dmesg contains (as a single line, wrapped below):
audit: type=1400 audit(1598229295.959:73): apparmor="DENIED"
operation="exec" profile="libvirtd" name="/usr/lib/qemu/virtiofsd"
pid=46007 comm="rpc-worker" requested_mask="x" denied_mask="x"
fsuid=0 ouid=0
To avoid this, allow execution of virtiofsd from the libvirtd AppArmor
profile.
[virtiofs]: https://libvirt.org/kbase/virtiofs.html
[virtiofsd]: https://www.qemu.org/docs/master/interop/virtiofsd.html
Signed-off-by: Kevin Locke <kevin@kevinlocke.name>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Driver module loaders current hardcode ".so" as the file
extension. On MacOS, meson uses ".dylib" as a module file extension.
This patch adds VIR_FILE_MODULE_EXT to virfile.h defined as the
hosts module extension, and updates driver module loaders to make
use of it.
Signed-off-by: Scott Shambarger <scott-libvirt@shambarger.net>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Previous patch handled the runtime case where a non-x86 host is
fetching /proc/cpuinfo data for a microcode info that we know
it doesn't exist. This change alone speeded everything by a
bit for non-x86, but there is at least one major culprit left.
qemuxml2argvtest does several arch-specific tests, and a good
chunk of them are x86 exclusive. This means that 'hostArch'
will be seen as x86 for these tests, even when running in
non-x86 hosts. In a Power 9 server with 128 CPUs, qemuxml2argvtest
takes 298 seconds to complete in average, and 'perf record'
indicates that 95% of the time is spent in
virHostCPUGetMicrocodeVersion().
This patch mocks virHostCPUGetMicrocodeVersion() to always return
0 in the tests, avoiding /proc/cpuinfo reads. This will make all
tests behave arch-agnostic, and the microcode value being 0 has no
impact on any existing test.
This is a CI speed across the board for all archs, including x86,
given that we're not reading /proc/cpuinfo in the tests. For
a Thinkpad T480 laptop with 8 Intel i7 CPUs, qemuxml2argvtest
went from 15.50 sec to 12.50 seconds. The performance gain is even
more noticeable for huge servers with lots of CPUs. For the
Power 9 server mentioned above, this patch speeds qemuxml2argvtest
to 9 seconds, down from 298 sec.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Non-x86 archs does not have a 'microcode' version like x86. This is
covered already inside the function - just return 0 if no microcode
is found. Regardless of that, a read of /proc/cpuinfo is always made.
Each read will invoke the kernel to fill in the CPU details every time.
Now let's consider a non-x86 host, like a Power 9 server with 128 CPUs.
Each /proc/cpuinfo read will need to fetch data for each CPU and it
won't even matter because we know beforehand that PowerPC chips don't
have microcode information.
We can do better for non-x86 hosts by skipping this process entirely.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_autofree and remove the cleanup label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that all the users have been converted or silenced,
let's enable this warning.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some test rely too much on declaring variables in the middle
of the function. Use the macro to locally suppress the warning
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the macro no longer includes the 'ignore_value'
statement, stop putting another empty statement after it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The VIR_XPATH_NODE_AUTORESTORE contains an ignore_value
statement to silence an unused variable warning on clang.
Use a pragma instead, which is not a statement.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The ScanTargets testing code declares some variables
in the middle of main.
Split it out into a separate function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
VIR_CGROUP_BACKEND_CALL is exclusively used at the end
of a function, but it declares a variable.
Wrap it in a do..while block.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Declare the variables at the beginning of the function,
then fill them up.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Declare it at the beginning of the function
instead of right before use.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Many of our functions start with a DEBUG statement.
Move the statements after declarations to appease
our coding style.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Split those initializations that depend on a statement
above them.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree and move the declarations to the beginning
of the block.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Repeat the whole function header instead of mixing #ifdefs
in the code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support qemu commandline passthrough in the domXML to native config
converter. Add tests to check the conversion.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Xen supports passing arbitrary arguments to the QEMU device model via
the 'extra' member of the public libxl_domain_build_info structure.
This patch adds a 'xen' namespace extension, similar to the QEMU and
bhyve drivers, to map arbitrary arguments to the 'extra' member. Only
passthrough of arguments is supported. Passthrough of environment
variables or capabilities adjustments is not supported.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit <c9ec7088c7a3f4cd26bb471f1f243931fff6f4f9> introduced a support
to fully allocate qcow2 images when <allocation> matches <capacity> but
it doesn't work as expected.
The issue is that info.size_arg is in KB but the info.allocation
introduced by the mentioned commit is in B. This results in using
"preallocation=falloc," in cases where "preallocation=metadata," should
be used.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These leaks were introduced in commit 15d280fa97, use g_autofree for all
cert_path pointers.
Signed-off-by: Jin Yan <jinyan12@huawei.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For iscsi-direct pool, the initiator is necessary for pool defining:
<pool type="iscsi-direct">
...
<initiator>
<iqn name="iqn.2013-06.com.example:iscsi-initiator"/>
</initiator>
...
</pool>
Add --source-initiator to fill the initiator iqn for
pool-create-as/pool-define-as subcommands.
https://bugzilla.redhat.com/show_bug.cgi?id=1658082
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virJSONValueObjectCreate rather than creating the object
piece-by-piece and use new accessors for bitmap to simplify the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Consider a couple of misspelt emails in B-y tags.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
PLD Linux is a Linux distribution, so @pld-linux.org fits in the
opensource group with similar projects.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Document the new <audio> element which allows to specify
host audio backend for a guest <sound> device, and update
the <sound> element description with the new <audio>
sub-element which specifies the other end of the mapping.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow to map sound playback and recording devices to host devices
using "<audio type='oss'/>" OSS audio backend.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a new device element "<audio>" which allows
to map guest sound device specified using the "<sound>"
element to specific audio backend.
Example:
<sound model='ich7'>
<audio id='1'/>
</sound>
<audio id='1' type='oss'>
<input dev='/dev/dsp0'/>
<output dev='/dev/dsp0'/>
</audio>
This block maps to OSS audio backend on the host using
/dev/dsp0 device for both input (recording)
and output (playback).
OSS is the only backend supported so far.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
bhyve supports intel hda sound devices that could be specified
on the command like using "-1:0,hda,play=$play_dev,rec=$rec_dev",
where "1:0" is a PCI address, and "$play_dev" and "$rec_dev"
point to the playback and recording device on the host respectively.
Currently, schema of the 'sound' element doesn't allow specifying
neither playback nor recording devices, so for now hardcode
/dev/dsp0, which is the first audio device on the host.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add 'ich7' sound model. This is a preparation for sound support in
bhyve, as 'ich7' is the only model it supports.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Back when macvtap support was added in commit 315baab944 in Feb. 2010
(libvirt-0.7.7), it was setup to autogenerate a name for the device if
one wasn't supplied, in the pattern "macvtap%d" (or "macvlan%d"),
similar to the way an unspecified standard tap device name will lead
to an autogenerated "vnet%d".
As a matter of fact, in commit ca1b7cc8e4 added in May 2010, the code
was changed to *always* ignore a supplied device name for macvtap
interfaces by deleting *any* name immediately during the <interface>
parsing (this was intended to prevent one domain which had failed to
completely start from deleting the macvtap device of another domain
which had subsequently been provided the same device name (this will
seem mildly ironic later). This was later fixed to only clear the
device name when inactive XML was being parsed. HOWEVER - this was
only done if the xml was <interface type='direct'> - autogenerated
names were not cleared for <interface type='network'> (which could
also result in a macvtap device).
Although the names of "vnetX" tap devices had always been
automatically cleared when parsing <interface> (see commit d1304583d
from July 2008 (!)), at the time macvtap support was added, both vnetX
and macvtapX device names were always included when formatting the
XML.
Then in commit a8be259d0c (July 2011, libvirt-0.9.4), <interface>
formatting was changed to also clear out "vnetX" device names during
XML formatting as well. However the same treatment wasn't given to
"macvtapX".
Now in 2020, there has been a report that a failed migration leads to
the macvtap device of some other unrelated guest on the destination
host losing its network connectivity. It was determined that this was
due to the domain XML in the migration containing a macvtap device
name, e.g. "macvtap0", that was already in use by the other guest on
the destination. Normally this wouldn't be a problem, because libvirt
would see that the device was already in use, and then find a
different unused name. But in this case, other external problems were
causing the migration to fail prior to selecting a macvtap device and
successfully opening it, and during error recovery, qemuProcessStop()
was called, which went through all def->nets objects and (if they were
macvtap) deleted the device specified in net->ifname; since libvirt
hadn't gotten to the point of replacing the incoming "macvtap0" with
the name of a device it actually created for this guest, that meant
that "macvtap0" was deleted, *even though it was currently in use by a
different guest*!
Whew!
So, it turns out that when formatting "migratable" XML, "vnetX"
devices are omitted, just as when formatting "inactive" XML. By making
the code in both interface parsing and formatting consistent for
"vnetX", "macvtapX", and "macvlanX", we can thus make sure that the
autogenerated (and unneeded / completely *not* wanted) macvtap device
name will not be sent with the migration XML. This way when a
migration fails, net->ifname will be NULL, and libvirt won't have any
device to try and (erroneously) delete.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Back when the original version of this chunk of code was added (commit
41b087198 in libvirt-0.8.1 in April 2010), we used virExecDaemonize()
to start the qemu process, and would continue on in the function
(which at that time was called qemudStartVMDaemon()) even if a -1 was
returned. So it was possible to get to this code with rv == -1 (it was
called "ret" in that version of the code).
In modern libvirt code, qemu is started with virCommandRun(); then we
call virPidFileReadPath(); those are the only two ways of setting "rv"
prior to this code being removed, and in either case if the new value
of rv < 0, then we immediately skip over the rest of the code to the
cleanup: label.
This means that the code being removed by this patch is
unreachable.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Even if namespaces are disabled, then due to a missing check at the
beginning of qemuDomainBuildNamespace(), the domain startup code
still tries to populate (nonexistent) domain's namespace.
Fixes: 8da362fe62
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We do not auto-align down pSeries NVDIMMs anymore.
This reverts commit 8f474ceea0.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After the recent changes, this function is now always returning
zero. Turn it to 'void' to relieve callers from checking it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We don't need the auto-alignment now that the user is handling
it by hand.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
