It makes sense for none of the callers to have negative value as an
output and, fortunately, if anyone tried defining domain with negative
memory or any other value parsed by virDomainParseScaledValue(), the
resulting value was 0. That means we can error out during parsing as
it won't break anything.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1155843
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1146837
Resolve a crash in libvirtd resulting from commit id 'a4bd62ad' (1.0.6)
which added parentaddr and unique_id to allow unique identification of
a scsi_host, but assumed that all the pool entries and the incoming
definition would be similarly defined. If the existing pool uses the
'name' attribute and an incoming pool is using the parentaddr/unique_id,
then the code will attempt to compare the existing name string against
the incoming name string which doesn't exist (is NULL) and results in
a core (STREQ).
Conversely, if the existing pool used the parentaddr/unique_id and the
to be defined pool used the name, then the comparison would be against
the parentaddr, but since the incoming pool doesn't have one - that would
leave the comparison against a parentaddr of all 0's and a unique_id of 0,
which will always comparison to fail. This means someone could define the
same source adapter for two pools
In order to resolve this, adjust the code to get the 'host#' to be used
by the storage scsi backend in order to check/start the pool and make sure
the incoming definition doesn't match any of the existing pool defs.
The mode attribute is required for the source element of vhost-user.
Thus virDomainNetDefFormat should always generate a xml with it and not
only when the mode is server.
The commit fixes the issue. And it adds a vhostuser interface in
'client' mode to qemuxml2argv-net-vhostuser.(args|xml) to test this
usecase.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Allow the Xen drivers to determine default vram values. Sane
default vaules depend on the device model being used, so the
drivers are in the best position to determine the defaults.
For the legacy xen driver, it is best to maintain the existing
logic for setting default vram values to ensure there are no
regressions. The libxl driver currently does not support
configuring a video device. Support will be added in a
subsequent patch, where the benefit of this change will be
reaped.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This new attribute will control whether or not libvirt will pay
attention to guest notifications about changes to network device mac
addresses and receive filters. The default for this is 'no' (for
security reasons). If it is set to 'yes' *and* the specified device
model and connection support it (currently only macvtap+virtio) then
libvirt will watch for NIC_RX_FILTER_CHANGED events, and when it
receives one, it will issue a query-rx-filter command, retrieve the
result, and modify the host-side macvtap interface's mac address and
unicast/multicast filters accordingly.
The functionality behind this attribute will be in a later patch. This
patch merely adds the attribute to the top-level of a domain's
<interface> as well as to <network> and <portgroup>, and adds
documentation and schema/xml2xml tests. Rather than adding even more
test files, I've just added the net attribute in various applicable
places of existing test files.
This patch implements support for the ivshmem device in QEMU.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch adds parsing/formatting code as well as documentation for
shared memory devices. This will currently be only accessible in QEMU
using it's ivshmem device, but is designed as generic as possible to
allow future expansion for other hypervisors.
In the devices section in the domain XML users may specify:
- For shmem device using a server:
<shmem name='shmem0'>
<server path='/tmp/socket-ivshmem0'/>
<size unit='M'>32</size>
<msi vectors='32' ioeventfd='on'/>
</shmem>
- For ivshmem device not using an ivshmem server:
<shmem name='shmem1'>
<size unit='M'>32</size>
</shmem>
Most of the configuration is made optional so it also allows
specifications like:
<shmem name='shmem1/>
<shmem name='shmem2'>
<server/>
</shmem>
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If you use public api virConnectListAllDomains() with second parameter
set to NULL to get only the number of domains you will lock out all
other operations with domains.
Introduced by commit 2c680804.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When virConnectDomainQemuMonitorEventRegister is called with the
VIR_CONNECT_DOMAIN_QEMU_MONITOR_EVENT_REGISTER_REGEX flag,
ignore the flag instead of crashing.
https://bugzilla.redhat.com/show_bug.cgi?id=1144920
Add options for tuning segment offloading:
<driver>
<host csum='off' gso='off' tso4='off' tso6='off'
ecn='off' ufo='off'/>
<guest csum='off' tso4='off' tso6='off' ecn='off' ufo='off'/>
</driver>
which control the respective host_ and guest_ properties
of the virtio-net device.
If you have a bridge network in running domain and libvirtd is restarted
the information about host bridge interface is lost from live xml.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140085
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This new event will use typedParameters to expose what has been actually
updated and the reason is that we can in the future extend any tunable
values or add new tunable values. With typedParameters we don't have to
worry about creating some other events, we will just use this universal
event to inform user about updates.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Cleanup virDomanDef structure from other nested structure and create
separate type definition for them.
Fix a typo in virDomainHugePage.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
- Provide an implementation for buildPool and deletePool operations
for the ZFS storage backend.
- Add VIR_STORAGE_POOL_SOURCE_DEVICE flag to ZFS pool poolOptions
as now we can specify devices to build pool from
- storagepool.rng: add an optional 'sourceinfodev' to 'sourcezfs' and
add an optional 'target' to 'poolzfs' entity
- Add a couple of tests to storagepoolxml2xmltest
Check to see if the UEFI binary mentioned in qemu.conf actually
exists, and if so expose it in domcapabilities like
<loader ...>
<value>/path/to/ovmf</value>
</loader>
We introduce some generic domcaps infrastructure for handling
a dynamic list of string values, it may be of use for future bits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As of 542899168c we learned libvirt to use UEFI for domains.
However, management applications may firstly query if libvirt
supports it. And this is where virConnectGetDomainCapabilities()
API comes handy.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For tuning the network, alternative devices
for creating tap and vhost devices can be specified via:
<backend tap='/dev/net/tun' vhost='/dev/net-vhost'/>
Instead of checking upfront if the <driver> element will be needed
in a big condition, just format all the attributes into a string
and output the <driver> element if the string is not empty.
We already are checking for negative value, reporting an error, but
using wrong function and the check only succeeds when a value that
cannot be converted to number successfully is encountered. This patch
provides just a minor change in call of the right version
of function virStrToLong.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138539
https://bugzilla.redhat.com/show_bug.cgi?id=1101574
Add an option 'iothreadpin' to the <cpuset> to allow for setting the
CPU affinity for each IOThread.
The iothreadspin will mimic the vcpupin with respect to being able to
assign each iothread to a specific CPU, although iothreads ids start
at 1 while vcpu ids start at 0. This matches the iothread naming scheme.
When spanning tree protocol is allowed in bridge settings, forward delay
value is set as well (default is 0 if omitted). Until now, there was no
check for delay value validity. Delay makes sense only as a positive
numerical value.
Note: However, even if you provide positive numerical value, brctl
utility only uses values from range <2,30>, so the number provided can
be modified (kernel most likely) to fall within this range.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1125764
Seems when commit id 'ea130e3b' added the checks to ensure each of
the hard_limit, soft_limit, and swap_hard_limit wasn't set at
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED - a copy/paste error of using
the 'hard_limit' for each comparison was done. Adjust the code.
If a (floppy) drive isn't selected for snapshot explicitly and is empty
don't try to snapshot it. For external snapshots this would fail as we
can't generate a name for the snapshot from an empty drive.
Reported-by: Pavel Hrdina <phrdina@redhat.com>
The code compares def->forwarders when deciding to return 0 at a
couple of points, then uses "def->nfwds" as a way to index into
the def->forwarders array. That reference results in Coverity
complaining that def->forwarders being NULL was checked as part
of an arithmetic OR operation where failure could be any one 5
conditions, but that is not checked when entering the loop to
dereference the array. Changing the comparisons to use nfwds
will clear the warnings
Signed-off-by: John Ferlan <jferlan@redhat.com>
When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.
Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.
Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files
The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The new blockcopy API wants to reuse only a subset of the disk
hotplug parser - namely, we only care about the embedded
virStorageSourcePtr inside a <disk> XML. Strange as it may
seem, it was easier to just parse an entire disk definition,
then throw away everything but the embedded source, than it
was to disentangle the source parsing code from the rest of
the overall disk parsing function. All that I needed was a
couple of tweaks and a new internal flag that determines
whether the normally-mandatory target element can be
gracefully skipped, since everything else was already optional.
* src/conf/domain_conf.h (virDomainDiskSourceParse): New
prototype.
* src/conf/domain_conf.c (VIR_DOMAIN_XML_INTERNAL_DISK_SOURCE):
New flag.
(virDomainDiskDefParseXML): Honor flag to make target optional.
(virDomainDiskSourceParse): New function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since 9f781da69d
Resolve a libvirtd crash in virStoragePoolSourceFindDuplicate()
when there is an existing SCSI pool defined with adapter type as
'scsi_host' and defining a new SCSI pool with adapter type as
'fc_host' and parent attribute missing or vice versa.
For example, if there is an existing SCSI pool with adapter type
as 'scsi_host' defined using the following XML
<pool type='scsi'>
<name>TEST_SCSI_POOL</name>
<source>
<adapter type='scsi_host' name='scsi_host1'/>
</source>
<target>
<path>/dev/disk/by-path</path>
</target>
</pool>
When defining another SCSI pool with adapter type as 'fc_host' using the
following XML will crash libvirtd
<pool type='scsi'>
<name>TEST_SCSI_FC_POOL</name>
<source>
<adapter type='fc_host' wwnn='1234567890abcdef' wwpn='abcdef1234567890'/>
</source>
<target>
<path>/dev/disk/by-path</path>
</target>
</pool>
Same is true for the reverse case as well where there exists a SCSI pool
with adapter type as 'fc_host' and another SCSI pool is defined with
adapter type as 'scsi_host'.
This happens because for fc_host 'name' is optional attribute whereas for
scsi_host its mandatory. However the check in libvirt for finding duplicate
storage pools didn't take that into account while comparing
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1027096#c8
There are two ways in which security model can make it way into
<seclabel/>. One is as the @model attribute, the second one is
via security_driver knob in qemu.conf. Then, while parsing
<seclabel/> several checks and fix ups of old, stale combinations
are performed. However, iff @model is specified. They are not
done in the latter case. So it's still possible to feed libvirt
with senseless combinations (if qemu.conf is adjusted correctly).
One example of a seclabel that needs some adjustment (in case
security_driver=none in qemu.conf) is:
<seclabel type='dynamic' relabel='yes'/>
The fixup code is copied from virSecurityLabelDefParseXML
(covering the former case) into virSecurityLabelDefsParseXML
(which handles the latter case).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Our style overwhelmingly uses hanging braces (the open brace
hangs at the end of the compound condition, rather than on
its own line), with the primary exception of the top level function
body. Fix the few remaining outliers, before adding a syntax
check in a later patch.
* src/interface/interface_backend_netcf.c (netcfStateReload)
(netcfInterfaceClose, netcf_to_vir_err): Correct use of { in
compound statement.
* src/conf/domain_conf.c (virDomainHostdevDefFormatSubsys)
(virDomainHostdevDefFormatCaps): Likewise.
* src/network/bridge_driver.c (networkAllocateActualDevice):
Likewise.
* src/util/virfile.c (virBuildPathInternal): Likewise.
* src/util/virnetdev.c (virNetDevGetVirtualFunctions): Likewise.
* src/util/virnetdevmacvlan.c
(virNetDevMacVLanVPortProfileCallback): Likewise.
* src/util/virtypedparam.c (virTypedParameterAssign): Likewise.
* src/util/virutil.c (virGetWin32DirectoryRoot)
(virFileWaitForDevices): Likewise.
* src/vbox/vbox_common.c (vboxDumpNetwork): Likewise.
* tests/seclabeltest.c (main): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a new disk "driver" attribute "iothread" to be parsed as the thread
number for the disk to use. In order to more easily facilitate the usage
and configuration of the iothread, a "zero" for the attribute indicates
iothreads are not supported for the device and a positive value indicates
the specific thread to try and use.
Introduce XML to allowing adding iothreads to the domain. These can be
used by virtio-blk-pci devices in order to assign a specific thread to
handle the workload for the device. The iothreads are the official
implementation of the virtio-blk Data Plane that's been in tech preview
for QEMU.
