Specify the memory size by using '-m size=2048k' instead of just '-m 2'.
The new syntax is used when memory hotplug is enabled. To preserve
memory sizing, if memory hotplug is disabled the size is rounded down to
the nearest mebibyte.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These are allegedly necessary to keep the output consistent,
but now that we're using a privileged config for the driver we
get the desired behavior out of the box, and as a bonus the
paths match what you would actually see on a regular host.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The QEMU binary is built from the v7.0.0-rc2 tag.
Some of the additional capabilities that show up are a
consequence of more features being enabled in this build than
in the one used to generate the replies initially.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Changes in all 'ppc64-latest.ags' files were needed due to the
JSONification of command line devices.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When -device is configured via JSON a bug [1] is triggered in qemu were
the DEVICE_DELETED event for the removal of the device frontend is no
longer delivered to libvirt. Without the DEVICE_DELETED event we don't
remove the corresponding entries in the VM XML.
Until qemu will be fixed we must stop using the JSON syntax for -device.
This patch removes the detection of the capability. The capability is
used only during startup of a fresh VM so we don't need to consider any
compaitibility steps for existing VMs.
For users who wish to use 'libvirt-7.9' and 'libvirt-7.10' with
'qemu-6.2' there are two possible workarounds:
- filter out the 'device.json' qemu capability '/etc/libvirt/qemu.conf':
capability_filters = [ "device.json" ]
- filter out the 'device.json' qemu capability via qemu namespace XML:
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
[...]
<qemu:capabilities>
<qemu:del capability='device.json'/>
</qemu:capabilities>
</domain>
We must never again use the same capability name as we are now
instructing users to filter it as a workaround so once qemu is fixed
we'll need to pick a new capability value for it.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=2036669
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2035237
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We currently use -machine accel=XXX which is just a syntax sugar
for -accel XXX. The former doesn't allow specifying arguments for
accelerator, because all arguments passed to -machine are
treated as arguments of machine itself.
The -accel argument was introduced in QEMU commit
v2.9.0-rc0~70^2~19 and since our minimum required version is
newer (2.11.0) we can safely assume its existence and use it
without any capability.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/233
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'-audiodev' as a modern implementation based on QAPI already takes JSON
as the argument. Convert our code to use it directly.
The declaration of the QAPI types can be found in
'qemu.git/qapi/audio.json'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch updates domaincapsdata and qemucapabilitiesdata for ppc64
with qemu commit v6.1.0-1714-gc5b2f55981.
Changes in all 'ppc64-latest.ags' files were needed. The changes are
mundane despite the volume. For all 'ppc64-latest.args' files the
changes are:
- removing '-sandbox' command line;
- 'secret' and 'memory-backend-ram' objects are now using qom-type format;
- '-device' is now using qom-type format.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Build commandlines for character devices via JSON.
For devices using 'VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_SERIAL' address
type 'qemuBuildDeviceAddressProps' will now generate the address. The
only special property is 'nr'. QEMU declares it as:
nr=<uint32> - (default: 4294967295)
The test fallout is caused by formatting addresses as decimal numbers
instead of hex as described in the commit which added
'qemuBuildDeviceAddressProps'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virCommandToString has the possibility to return an already wrapped
string with better format than what we get from the test wrapper script.
The main advantage is that arguments for an option are always on the
same line which makes it more easy to see what changed in a diff and
prevents re-wrapping of the line if a wrapping point moves over the
threshold.
Additionally the used output is the same we have in the VM log file when
a VM is starting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The -audiodev argument is replacing the QEMU_AUDIO_DRV env variable (and
its relations).
Sadly we still have to use the SDL_AUDIODRIVER env variable because that
wasn't mapped into QAPI schema.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.
The long format has been supported with -chardev since at least 1.5.3,
so we don't need to check for it.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The property was deprecated. Don't format it based on the new capability
if the user didn't explicitly request it.
https://bugzilla.redhat.com/show_bug.cgi?id=1829550
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The churn in the output files is caused primarily by the fact that
replies were generated on a POWER9 machine, which is good because
we didn't have coverage of that before.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update ppc64 capabilities to pick up the new NVDIMM capability
support for ppc64.
Since the ppc64 capabilities weren't updated for some time, the
bulk of the changes here are related to the blockdev support
(see commit c6a9e54ce3 for info) that we are picking up just
now.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The previous approac of just purging the alias combined with the fact
that we filled in fake machine types in the test data meant that if a
test case used an alias machine type such as 'pc' or 'q35' it would not
properly resolve to the actual data returned by qemu.
This started to be a problem since the CPU driver now looks at the
default CPU reported with the machine type.
This patch replaces the original approach of just removing the alias by
replacing it with a copy of the machine type data which the type would
alias to. This means that we are using the real data while we don't
modify the test output after every qemu upgrade.
Additionally this change will allow us to drop adding the fake machine
types later.
The test fallout is from actually excercising the CPU driver with
actual data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The latter is deprecated and will be removed soon. The advised
replacement is '-overcommit mem-lock=on|off'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By default, qemu user's home dir points to '/' which shouldn't be used
at all. We therefore pass the HOME variable from the current variable
iff not running as SUID, which means that for systemd we never set it.
This patch makes sure, that for system QEMU this is always set to
libDir/<driver>, session mode is left untouched.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For session mode, only XDG_CACHE_HOME is set, because we want to remain
integrating with services in user session, but for system mode, this
would have become reading/writing to '/' which carries the obvious issue
with permissions (also, '/' is the wrong location in 99.9% cases anyway).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The existing behavior for ppc64 guests is to always add a USB
keyboard and mouse combo if graphics are present; unfortunately,
this means any attempt to use a USB tablet will cause both pointing
devices to show up in the guest, which in turn will result in poor
user experience.
We can't just stop adding the USB mouse or start adding a USB tablet
instead, because existing applications and users might rely on the
current behavior; however, we can avoid adding the USB mouse if a USB
tablet is already present, thus allowing users and applications to
create guests that contain a single pointing device.
https://bugzilla.redhat.com/show_bug.cgi?id=1683681
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
These are similar to the existing simple headless guests, but
also include a graphical output and some input devices.
Input files were generated by running
$ virt-install \
--name guest --os-variant fedora29 \
--vcpus 4 --memory 4096 --disk size=5 \
--graphics vnc \
--print-xml
followed by minor tweaks.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
