Now that xenconfig supports parsing and formatting Xen's
XL config format, integrate it into the libxl driver's
connectDomainXML{From,To}Native functions.
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
Now that xenconfig supports parsing and formatting Xen's
XL config format, integrate it into the libxl driver's
connectDomainXML{From,To}Native functions.
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This patch contains three domain cleanup improvements in the migration
finish phase, ensuring a domain is properly disposed when a failure is
detected or the migration is cancelled.
The check for virDomainObjIsActive is moved to libxlDomainMigrationFinish,
where cleanup can occur if migration failed and the domain is inactive.
The 'cleanup' label was missplaced in libxlDomainMigrationFinish, causing
a migrated domain to remain in the event of an error or cancelled migration.
In cleanup, the domain was not removed from the driver's list of domains.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Moving data reception of the perform phase of migration to a
thread introduces a race with the finish phase, where checking
if the domain is active races with the thread finishing the
perform phase. The race is easily solved by acquiring a job in
the finish phase, which must wait for the perform phase job to
complete.
While wrapping the finish phase in a job, noticed the virDomainObj
was being unlocked in a callee - libxlDomainMigrationFinish. Move
the unlocking to libxlDomainMigrateFinish3Params, where the lock
is acquired.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()
There is no need to acquire the driver-wide lock in
libxlDomainDefineXML. When switching to jobs in the libxl
driver, most driver-wide locks were removed. The locking here
was preserved since I mistakenly thought virDomainObjListAdd
needed protection. This is not the case, so remove the
unnecessary locking.
Test suites using the port allocator don't want to have different
behaviour depending on whether a port is in use on the host. Add
a VIR_PORT_ALLOCATOR_SKIP_BIND_CHECK which test suites can use
to skip the bind() test. The port allocator will thus only track
ports in use by the test suite process itself. This is fine when
using the port allocator to generate guest configs which won't
actually be launched
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Code logic in libxlDomainAttachDeviceFlags and libxlDomainDetachDeviceFlags
is wrong with return value in error cases.
'ret' was being set to 0 if 'flags & VIR_DOMAIN_DEVICE_MODIFY_CONFIG' was
false. Then if something like virDomainDeviceDefParse() failed in the
VIR_DOMAIN_DEVICE_MODIFY_LIVE logic, the error would be reported but the
function would return success.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
During migration, the libxl driver starts a modify job in the
begin phase, ending the job in the confirm phase. This is
essentially VIR_MIGRATE_CHANGE_PROTECTION semantics, but the
driver does not support that flag. Without CHANGE_PROTECTION
support, the job would never be terminated in error conditions
where migrate confirm phase is not executed. Further attempts
to modify the domain would result in failure to acquire a job
after LIBXL_JOB_WAIT_TIME.
Similar to the qemu driver, end the job in the begin phase.
Protecting the domain object across all phases of migration can
be done in a future patch adding CHANGE_PROTECTION support.
In libxlDomainMigrationPrepare(), a new virDomainObj is created
from the incoming domain def and added to the driver's domain
list, but never removed if there are subsequent failures during
the prepare phase.
targethost# virsh list --all
sourcehost# virsh migrate --live dom xen+ssh://targethost/system
error: operation failed: Fail to create socket for incoming migration.
targethost# virsh list --all
error: Failed to list domains
error: name in virGetDomain must not be NULL
After adding code to remove the domain on prepare failure, noticed
that libvirtd crashed due to double free of the virDomainDef. Similar
to the qemu driver, pass a pointer to virDomainDefPtr so it can be set
to NULL once a virDomainObj is created from it.
Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
So far, we only report an error if formatting the siblings bitmap
in NUMA topology fails.
Be consistent and always report error in virCapabilitiesFormatXML.
libxl does not support save, restore, or migrate on all architectures,
notably ARM. Detect whether libxl supports these operations using
LIBXL_HAVE_NO_SUSPEND_RESUME. If not supported, drop advertisement of
<migration_features>.
Found by Ian Campbell while improving Xen's OSSTEST infrastructure
http://lists.xen.org/archives/html/xen-devel/2014-06/msg02171.html
This simplifies the usage in {libxl,qemu}DomainGetNumaParameters
and it's needed for consistent error reporting in virBitmapFormat.
Also remove the forgotten ATTRIBUTE_NONNULL marker.
This patch adds initial migration support to the libxl driver,
using the VIR_DRV_FEATURE_MIGRATION_PARAMS family of migration
functions.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
To allow the test suite to creat the XML option object,
move the virDomainXMLOptionNew call into a libxlCreateXMLConf
method.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With xend on the way out, installations may not even have
/usr/sbin/xend, which results in the following error when the
drivers are probed
2014-04-28 18:21:19.271+0000: 22129: error : virCommandWait:2426 :
internal error: Child process (/usr/sbin/xend status) unexpected exit
status 127: libvirt: error : cannot execute binary /usr/sbin/xend:
No such file or directory
Check for existence of /usr/sbin/xend before trying to run it with
the 'status' option.
Currently the driver only exposes the ability to connect to the serial console
of a Xen guest, which doesn't work for a PV guest. Since for an HVM guest the
serial devices are duplicated as consoles it is sufficient to just use the
console devices unconditionally.
Tested with the following bit of config XML:
<domain type='xen'>
...
<devices>
<console type='pty'>
<target type='xen'/>
</console>
</devices>
</domain>
I have observed and tested this on ARM but I believe it also applies to x86 PV
guests.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Clark Laughlin <clark.laughlin@linaro.org>
Since it is an abbreviation, PCI should always be fully
capitalized or full lower case, never Pci.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There is a domain id in the virDomain structure as well as in the
virDomainObj structure. While the former can become stale the latter
is kept up to date. So it is safer to always (virDomainObjPtr)->def->id
internally.
This will fix issues seen when managing Xen guests through libvirt from
virt-manager (not being able to get domain info after define or reboot).
This was caused both though libxlDomainGetInfo() only but there were
a lot of places that might potentially cause issues, too.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit d9f19c30d0 moved a lot of the
configuration setup into libxlDriverConfigNew().
However that tries to create the libxl/libxl-driver.log before the
libxl directory gets created in libxlStateInitialize().
This causes the daemon to fail on systems that have not had the directory
created before.
Move the code to create the libxl directory into libxlDriverConfigNew().
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Part of a series of cleanups to use new accessor methods.
* src/libxl/libxl_conf.c (libxlMakeDisk): Use accessors.
* src/libxl/libxl_driver.c (libxlDomainChangeEjectableMedia)
(libxlDomainAttachDeviceDiskLive): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Move the domain event handler and shutdown thread out of the main
driver module and into libxl_domain module
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Include a pointer to the libxl driver in libxlDomainObjPrivate
object so it can be used in the domain event handler and
shutdown thread.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlVmStart from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainStart.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlFreeMem from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainFreeMem.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlDoNodeGetInfo from libxl_driver to libxl_conf
for use by other libxl modules. For consistency, rename to
libxlDriverNodeGetInfo.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlDomEventsRegister from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainEventsRegister.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlVmCleanup and libxlVmCleanupJob from libxl_driver to
libxl_domain for use by other libxl modules. For consistency,
rename to libxlDomainCleanup and libxlDomainCleanupJob.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlSaveImageOpen from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainSaveImageOpen.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
