Commit Graph

512 Commits

Author SHA1 Message Date
Ján Tomko
6dbe6e4cec virsh: initialize info in cmdIOThreadInfo
Although it is not needed at the moment, do not rely on a value being
set before the first jump to cleanup.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-13 13:58:56 +01:00
Ján Tomko
4c44c9f456 virsh: remove redundant virshNodeGetCPUCount
Since commit 4c4b821e it is not used for anything.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-13 13:58:55 +01:00
Ján Tomko
4834c9a4bd virsh: do not assign negative values to niothreads
Use a temporary 'rc' variable to avoid comparing signed
and unsigned integers in the cleanup section.

Bug introduced by commit 3072ded which added the comparison against
the unsigned 'i'.

Also make niothreads size_t to mark that it should be unsigned.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-13 13:58:55 +01:00
Ján Tomko
3ce86316a8 virsh: reduce the optimism in cmdIOThreadInfo
Instead of using niothreads which defaults to zero, use the common
pattern with a ret varaible set to true just before the cleanup label.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-13 13:58:55 +01:00
Ján Tomko
0f87356c51 virsh: allow empty targets in cmdDomFSInfo
Ever since the introduction of the guest-get-fsinfo command
in QEMU commit 46d4c572 qga/qapi-schema.json says that
the 'disks' array can possibly be empty. For example when getting
the target list is unsupported:
https://bugzilla.redhat.com/show_bug.cgi?id=1567041

Pass an empty string instead of NULL to vshTableRowAppend to prevent
a mismatched column number.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 13:50:10 +01:00
Ján Tomko
0e7707d830 virsh: use virBufferTrim in cmdDomFSInfo
Add comma after every string and trim the final one.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 10:14:53 +01:00
Ján Tomko
066d91ec79 virsh: do not report error on zero filesystems in cmdDomFSInfo
Use vshPrintExtra to report this message. It is a human-readable
explanation rather than an error.

Also, it is a very special system that runs with no filesystems.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 10:14:53 +01:00
Ján Tomko
023f0672d4 virsh: introduce 'ret' in cmdDomFSInfo
Failing to print the table is also a reason to return failure
and print the reported error.

Switch to the usual pattern where we fall through the cleanup
label right after setting ret to true instead of infering the
return value from the number of filesystems returned.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 10:14:53 +01:00
Ján Tomko
eb3f5a2c6d virsh: do not access uninitialized memory in cmdDomFSInfo
Initialize 'info' to prevent accessing random access memory.

Introduced by commit 3072ded released in 4.8.0.

https://bugzilla.redhat.com/show_bug.cgi?id=1676354

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 10:14:53 +01:00
Ján Tomko
44993d312d virsh: rename ret to rc in cmdDomFSInfo
Leave the 'ret' variable for the current function's return value.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 10:14:53 +01:00
Ján Tomko
443fc056a0 virsh: introduce ninfos variable in cmdDomFSInfo
Do not use 'ret' throughout the whole function to avoid confusion
and comparison of unsigned 'i' against signed 'ret'.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 10:14:53 +01:00
Jiri Denemark
f15789ecac virsh: Add support for setting post-copy migration bandwidth
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-02-07 16:25:59 +01:00
Cole Robinson
6a4d938dd3 Require a semicolon for VIR_ENUM_IMPL calls
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_IMPL calls.

Move the verify() statement to the end of the macro and drop
the semicolon, so the compiler will require callers to add a
semicolon.

While we are touching these call sites, standardize on putting
the closing parenth on its own line, as discussed here:
https://www.redhat.com/archives/libvir-list/2019-January/msg00750.html

Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-02-03 17:46:29 -05:00
Cole Robinson
7662194bf3 Require a semicolon to VIR_ENUM_DECL calls
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_DECL calls.

Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.

Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-02-03 17:46:29 -05:00
Michal Privoznik
5772885d28 lib: Use more of VIR_STEAL_PTR()
We have this very handy macro called VIR_STEAL_PTR() which steals
one pointer into the other and sets the other to NULL. The
following coccinelle patch was used to create this commit:

  @ rule1 @
  identifier a, b;
  @@

  - b = a;
    ...
  - a = NULL;
  + VIR_STEAL_PTR(b, a);

Some places were clean up afterwards to make syntax-check happy
(e.g. some curly braces were removed where the body become a one
liner).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2019-01-28 14:46:58 +01:00
Michal Privoznik
c99e954973 Remove even more Author(s): lines from source files
In 600462834f we've tried to remove Author(s): lines
from comments at the beginning of our source files. Well, in some
files while we removed the "Author" line we did not remove the
actual list of authors.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2019-01-03 13:24:18 +01:00
Luyao Huang
ae8484586c virsh: Fix vcpupin command output wrong vcpu pinning info
Commit 3072ded3 changed the waya to format the vcpu pinning info
and forget to get cpumap for each vcpu during the loop, that cause
vcpupin command will display vcpu 0 info for other vcpus.

Signed-off-by: Luyao Huang <lhuang@redhat.com>
2018-12-19 10:20:57 +01:00
Jiri Denemark
3f4914e03c qemu: Add support for postcopy-requests migration statistics
QEMU can report how many times during post-copy migration the domain
running on the destination host tried to access a page which has not
been migrated yet.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-17 16:16:30 +01:00
John Ferlan
11ceedcda0 tools: Add virsh iothreadset command
Add a command to allow for setting various dynamic IOThread polling
interval scope (poll-max-ns, poll-grow, and poll-shrink). Describe
the values in the virsh.pod in as generic terms as possible. The
more specific QEMU algorithm has been divulged in the previous patch.

Based heavily on code originally posted by Pavel Hrdina
<phrdina@redhat.com>, but altered to only provide one command
and to not managed a poll disabled state.

Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
2018-11-19 07:26:40 -05:00
Jiri Denemark
b7ccd0757d virsh: Require explicit --domain for domxml-to-native
The domxml-to-native virsh command accepts either --xml or --domain
option followed by a file or domain name respectively. The --domain
option is documented as required, which means an argument with no option
is treated as --xml. Commit v4.3.0-127-gd86531daf2 broke this by making
--domain optional and thus an argument with no option was treated as
--domain.

https://bugzilla.redhat.com/show_bug.cgi?id=1633077

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2018-09-26 17:22:38 +02:00
Michal Privoznik
4374900040 tools: Fix printf format
We're passing size_t but using format for unsigned long.
Introduced in latest vshTable rework patches.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-09-24 13:39:58 +02:00
Simon Kobyda
3072ded354 virsh: Implement vshTable API to vcpupin, iothreadinfo, domfsinfo
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
2018-09-24 09:09:14 +02:00
Han Han
e1b75dc500 virsh: Support alias in attach-interface
Add --alias to support custom alias in virsh attach-interface.

Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-07-23 12:04:49 +02:00
Han Han
64c579b705 virsh: Support alias in attach-disk
Add --alias to support custom disk alias in virsh attach-disk.

Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-07-23 12:02:32 +02:00
Simon Kobyda
728ad0e82b New virsh feature: domif-setlink --domain --interface --state completer
After you go through command mentioned above, completer
finds what state the device is currently in, and suggests
an opposite state.

Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-07-12 17:23:15 +02:00
Han Han
e11515ef8d virsh: sata support for virsh attach-disk --address
Adding sata bus address support to the optional address parameter of virsh
attach-disk. The address is used as controller.bus.unit. e.g.
sata:0.0.0

Signed-off-by: Han Han <hhan@redhat.com>
2018-07-09 17:19:20 +02:00
Han Han
31cd4dd8e7 virsh: usb support for virsh attach-disk --address
Adding usb bus address support to the optional address parameter
of virsh attach-disk. The address is used as bus:port. e.g. usb:1:1.

Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-07-09 17:13:16 +02:00
Michal Privoznik
01d1b535f8 virsh: Provide completer for detach-device-alias
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-07-03 04:56:29 +02:00
Ján Tomko
4a6e17038b virsh: fix help for detach-disk --print-xml
The help message was copied from attach-interface.
Introduced by commit <431e736>.

https://bugzilla.redhat.com/show_bug.cgi?id=1588295

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2018-06-07 09:21:14 +02:00
ramyelkest
2b6667abbf all: Replace virGetLastError with virGetLastErrorCode where we can
Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.

Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2018-06-05 18:44:05 +02:00
Jiri Denemark
361989bd18 virsh: Move cpu-{baseline,compare} commands
Similarly to cpu-models these two commands do not operate on a domain
and should be listed in the "Host and Hypervisor" commands section.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-05-28 15:54:10 +02:00
Michal Privoznik
856fb16492 virsh: Expose virDomainDetachDeviceAlias
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-05-28 13:08:42 +02:00
Lin Ma
66d6608148 virsh: Add event name completion to 'event' command
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-24 15:13:45 +02:00
Lin Ma
05642e8bd1 virsh: Move vshEventCallback structure definition to virsh-domain.h
The next patch will use it in virsh-completer.c for returning the
strings of domain event name. At the same time, rename it to
avoid possible name clashing.

Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-24 13:36:32 +02:00
Lin Ma
27e97d5c17 virsh: Add target name completion for block device options
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-17 17:06:11 +02:00
Lin Ma
a4bbd30400 virsh: Only return active domain names for block* command
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-17 17:06:11 +02:00
Lin Ma
84d660607d virsh: Only return active domain names for 'reset' command
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-17 17:06:11 +02:00
Lin Ma
7c07067c1d virsh: Remove 'id' text from help message for 'domrename' command
The inactive domains don't have any ID identifier, So adjust the help
message.

Signed-off-by: Lin Ma <lma@suse.com>
2018-05-17 17:06:11 +02:00
Lin Ma
d86531daf2 virsh: Apply macro for current VSH_OT_STRING "domain" options
These VSH_OT_STRING "domain" options support domain name completion now.

Signed-off-by: Lin Ma <lma@suse.com>
2018-05-10 09:21:13 +02:00
Lin Ma
f3097dc8b6 virsh: Add domain name completion to 'migrate-postcopy' command
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-10 07:51:50 +02:00
Lin Ma
8379895227 virsh: Move the definition of macro VIRSH_COMMON_OPT_DOMAIN_FULL to virsh.h
centralize the definition of macro VIRSH_COMMON_OPT_DOMAIN_FULL to virsh.h
to avoid unnecessary duplicated definition

Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-05-10 07:51:37 +02:00
Lin Ma
fea03bd31d virsh: Simplify control flow for 'qemu-agent-command' command
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-04 12:46:22 +02:00
Lin Ma
b9e3c8c5c0 virsh: Simplify control flow for 'desc' command
Just like the commit 8941c800, It does the similar thing.

Signed-off-by: Lin Ma <lma@suse.com>
2018-05-04 12:46:22 +02:00
Lin Ma
2273e408d9 virsh: Error out while domain not found for 'event' command
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-04 12:46:22 +02:00
Lin Ma
b925e6625c virsh: Error out while domain not found for 'qemu-monitor-event' command
Signed-off-by: Lin Ma <lma@suse.com>
2018-05-04 12:46:22 +02:00
Andrea Bolognani
ea9b0e580a keycodemapdb: Update submodule
This time around it's not enough to just pick the latest commit,
because with aed87bb2aa6ed83b49574eb982e3bdd4c36acf17 keycodemapdb
renamed the 'rfb' keycode to 'qnum' and we need to accept the new
name while maintaining backwards compatibility.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-03-12 16:30:49 +01:00
Ján Tomko
39a6df5334 virsh: use logical or for boolean values
Bitwise or just looks wrong here.
Introduced by <commit 69e0cd3>.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2018-03-08 16:51:39 +01:00
Peter Krempa
ca9aac53d3 virsh: Fix internal naming of some blockjob commands
The variable names for the options and information about a command
should have an underscore in places where the virsh command has a
hyphen. The function callback name should capitalize the letter after
the hyphen. This was not used in 'blockcommit', 'blockcopy', 'blockjob',
'blockpull', and 'blockresize' commands.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2018-02-19 15:25:00 +01:00
Peter Krempa
f2f4e96060 virsh: Remove <backingStore> sub-element in virshFindDisk
Previously we've removed the data only in virshUpdateDiskXML when
changing the disk source for the CDROM since the backing store would be
invalid. Move the code into a separate function and callit from
virshFindDisk which is also used when detaching disk.

The detaching code does not necessarily need to get the full backing
chain since it will need to act on the one managed by libvirt anyways
and this also takes care of problems when parts of the backing store
were invalid due to buggy RBD detection code.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2018-02-14 16:04:46 +01:00
Peter Krempa
431e73660e virsh: detach-disk: Add --print-xml switch
Similarly to other commands add an argument which allows to check the
XML which would be used to execute the operation instead.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2018-02-14 16:04:46 +01:00