This was introduced in QEMU 2.2.0, and is visible by -vnc appearing in
the "query-command-line-options" data.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU 9pfs 'fmode' and 'dmode' options have existed since QEMU 2.10.
Probe QEMU's command line set to check whether these options are
available, and if yes, enable this new QEMU_CAPS_FSDEV_CREATEMODE
capability on libvirt side.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use of the -enable-fips option is being deprecated in QEMU >= 5.2.0. If
FIPS compliance is required, QEMU must be built with libcrypt which will
unconditionally enforce it.
Thus there is no need for libvirt to pass -enable-fips to modern QEMU.
Unfortunately there was never any way to probe for -enable-fips in the
first instance, it was enabled by libvirt based on version number
originally, and then later unconditionally enabled when libvirt dropped
support for older QEMU. Similarly we now use a version number check to
decide when to stop passing -enable-fips.
Note that the qemu-5.2 capabilities are currently from the pre-release
version and will be updated once qemu-5.2 is released.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These parameters were originally set via dedicated commands which are
now deprecated. We want to use migrate-set-parameters instead if
possible.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This capability tracks whether QEMU supports -fw_cfg command line
option, more specifically whether it allows specifying filename.
There are some releases of QEMU which support -fw_cfg but not
filename. If this is ever a problem we can refine the capability
later on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is 'numa-mem-supported' machine attribute which specifies
whether '-numa mem=' is supported. Store it in our capabilities
as it will be used in later commits when building the command
line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since QEMU 2.10 it is possible to disable TCG when building
QEMU. Introduce a capability that reflects this.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Detect the werror property on SCSI and virtio disks.
But clear it if the QEMU supports usb-storage device without it
also supporting this option for usb-storage.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We don't need this for any functional purpose, but when debugging hosts
it is useful to know what binary a given capabilities XML document is
associated with.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This capability tracks if qemu is capable of:
-drive file.driver=nvme
The feature was added in QEMU's commit of v2.12.0-rc0~104^2~2.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Some specifics of machine types may depend on the accelerator and thus
the data should be moved to virQEMUCapsAccel. The TCG machine types are
just copied from the ones probed for KVM to simplify the changes to
qemucapabilitiestest data files.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In preparation for making machine types dependent on the accelerator,
the <machine> elements are formatted between <cpu type='kvm'> and
<cpu type='tcg'>.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to create a mapping between CPU model names and their
corresponding QOM types.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now we're passing a "base" string that contains both,
separated by an underscore. Some changes that we're going to
introduce later will require us to have the version number on its
own, and instead of delegating the task of splitting the two apart
to the callback it make more sense to perform it upfront.
This change results in quite a bit of churn because we're now
using the version number only, without the prefix, to calculate
the dummy microcodeVersion.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add a qemu capbility to see if the standalone ramfb device is available.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
This capability enables comparison of CPU models via QMP.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielh413@gmail.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Message-Id: <1568924706-2311-13-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This capability enables baselining of CPU models via QMP.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielh413@gmail.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Message-Id: <1568924706-2311-9-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The '-realtime mlock' cmd line argument was introduced in QEMU
commit v1.5.0-rc0~190 which matches minimal QEMU version we
require. Therefore, the capability will always be present.
Apparently, nearly none of our xml2argv test cases had the
capability hence slightly bigger change under qemuxml2argvdata/.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'blockdev-snapshot-sync' is present in QEMU since v0.14.0-rc0 and
'transaction' since v1.1.0 (52e7c241ac766406f05fa)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu added the 'drive-mirror' command in v1.3.0 (d9b902db3fb71fdc)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu added the 'block-commit' command in v1.3.0 (ed61fc10e8c8d2)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This was detected by the presence of 'block-stream' which is present in
qemu since v1.1 (db58f9c0605fa151b8c4)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since commit a7424faff QMP is always used.
Also, commit 932534e8 removed the last use of this apart from:
* parsing/formatting this in the caps cache
* using it as a temporary variable to know when to report an error
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The split of scsi-disk into the two separate devices was introduced by
qemu commit b443ae67 released in qemu v0.15.
All changes to test files are not really related to disk testing thanks
to previous refactors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
To avoid changes to the filled in microcode in case we change the caps
replies file for any reason make the number depend on the filename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This capability tracks if memory-backend-file has the align
attribute or not.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a capability check for IOThread polling (all were added at the
same time, so only one check is necessary).
Based on code originally posted by Pavel Hrdina <phrdina@redhat.com>
with the only changes to include the more recent QEMU releases.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU 3.1 should only expose the property if the host is actually
capable of creating hugetable-backed memfd. However, it may fail
at runtime depending on requested "hugetlbsize".
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Let's introduce zPCI capability.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It was already available in 1.5.0, so we can assume it's
present and avoid checking for it at runtime.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
