Commit Graph

101 Commits

Author SHA1 Message Date
Daniel P. Berrange
16658da4e7 Convert PCI device assignment over to -device
The old syntax is

  -pcidevice host=BUS:SLOT:FUNCTION

The new syntax is

  -device pci-assign,host=BUS:SLOT:FUNCTION,addr=<PCI SLOT>,id=host0
2010-01-18 13:55:56 +00:00
Daniel P. Berrange
e8d43d0687 Convert USB input devices to -device 2010-01-18 13:55:56 +00:00
Daniel P. Berrange
42ce352c13 Convert USB hostdevices over to -device
The old syntax was

   -usbdevice host:PRODUCT:VENDOR

Or

   -usbdevice host:BUS.DEV

The new syntax is

   -device usb-host,product=PRODUCT,vendor=VENDOR

Or

   -device usb-host,hostbus=BUS,hostaddr=DEV
2010-01-18 13:55:56 +00:00
Daniel P. Berrange
73370e9868 Convert USB disks over to -device
The previous syntax was severely limited in its options

  -usbdevice disk:/home/berrange/output.img

The new syntax is the same as for other disk types

  -drive file=/home/berrange/output.img,if=none,id=usb-1,index=1
  -device usb-storage,drive=usb-1

Again, the index= arg is wrong here, and will be removed in a
later merge
2010-01-18 13:55:56 +00:00
Daniel P. Berrange
1dd6f855c3 Convert NICs over to use -device & -netdev where possible
The current syntax uses a pair of args

   -net nic,macaddr=52:54:00:56:6c:55,vlan=3,model=pcnet,name=pcnet.0
   -net user,vlan=3,name=user.0

The new syntax does not  need the vlan craziness anymore, and
so has a simplified pair of args

   -netdev user,id=user.0
   -device pcnet,netdev=user.0,id=pcnet.0,mac=52:54:00:56:6c:55,addr=<PCI SLOT>
2010-01-18 13:55:56 +00:00
Daniel P. Berrange
6237e9c89b Convert disk drive over to use -device where available
The current preferred syntax for disk drives uses

  -drive file=/vms/plain.qcow,if=virtio,index=0,boot=on,format=qcow

The new syntax splits this up into a pair of linked args

  -drive file=/vms/plain.qcow,if=none,id=drive-virtio-0,format=qcow2
  -device virtio-blk-pci,drive=drive-virtio-0,id=virtio-0,addr=<PCI SLOT>

SCSI/IDE devices also get a bus property linking them to the
controller

  -device scsi-disk,drive=drive-scsi0-0-0,id=scsi0-0-0,bus=scsi0.0,scsi-id=0
  -device ide-drive,drive=drive-ide0-0-0,id=ide0-0-0,bus=ide0,unit=0
2010-01-18 13:55:56 +00:00
Daniel P. Berrange
4886cba76a Convert audio devices over to -device syntax
The current syntax for audio devices is a horrible multiplexed
arg

    -soundhw sb16,pcspk,ac97

The new syntax is

    -device sb16,id=sound0

or

    -device AC97,id=sound1,addr=<PCI SLOT>

NB, pcspk still uses the old -soundhw syntax
2010-01-18 13:55:56 +00:00
Daniel P. Berrange
38a22fbfaa Convert watchdog to -device
The current syntax for watchdogs is

    -watchdog i6300esb

The new syntax will now be

    -device i6300esb,id=watchdogNN,addr=<PCI-SLOT>
2010-01-18 13:55:56 +00:00
Daniel P. Berrange
7b2f8cdd7c Convert character devices over to use -device
The current character device syntax uses either

  -serial tty,path=/dev/ttyS2

Or

  -chardev tty,id=serial0,path=/dev/ttyS2 -serial chardev:serial0

With the new -device support, we now prefer

  -chardev file,id=serial0,path=/tmp/serial.log -device isa-serial,chardev=serial0

This patch changes the existing -chardev syntax to use this new
scheme, and fallbacks to the old plain -serial syntax for old
QEMU.

The monitor device changes to

  -chardev socket,id=monitor,path=/tmp/test-monitor,server,nowait -mon chardev=monitor

In addition, this patch adds --nodefaults, which kills off the
default serial, parallel, vga and nic devices. THis avoids the
need for us to explicitly turn each off
2010-01-18 13:55:56 +00:00
Daniel P. Berrange
053307175c Assign device aliases for all devices at startup
When starting a guest, give every device a unique alias. This will
be used for the 'id' parameter in -device args in later patches.
It can also be used to uniquely identify devices in the monitor

For old QEMU without -device, assign disk names based on QEMU's
historical naming scheme.

* src/qemu/qemu_conf.c: Assign unique device aliases
* src/qemu/qemu_driver.c: Remove obsolete qemudDiskDeviceName
  and use the device alias in eject & blockstats commands
2010-01-18 13:55:56 +00:00
Daniel P. Berrange
1ed1bf3a38 Probe for -device and use -nodefaults
Probe for the new -device flag and if available set the -nodefaults
flag, instead of using -net none, -serial none or -parallel none.
Other device types will be converted to use -device in later patches.
The -nodefaults flag will help avoid unwelcome surprises from future
QEMU releases

* src/qemu/qemu_conf.c: Probe for -device. Add -nodefaults flag.
  Remove -net none, -serial none or -parallel none
* src/qemu/qemu_conf.h: Define QEMU_CMD_FLAG_DEVICE
* tests/qemuhelpdata/qemu-0.12.1: New data file for 0.12.1 QEMU
* tests/qemuhelptest.c: Test feature extraction from 0.12.1 QEMU
2010-01-18 13:39:14 +00:00
Daniel P. Berrange
5da9c98067 Introduce device aliases
This patch introduces the support for giving all devices a short,
unique name, henceforth known as a 'device alias'.  These aliases
are not set by the end user, instead being assigned by the hypervisor
if it decides it want to support this concept.

The QEMU driver sets them whenever using the -device arg syntax
and uses them for improved hotplug/hotunplug. it is the intent
that other APIs (block / interface stats & device hotplug) be
able to accept device alias names in the future.

The XML syntax is

   <alias name="video0"/>

This may appear in any type of device that supports device info.

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add a 'alias'
  field to virDomainDeviceInfo struct & parse/format it in XML
* src/libvirt_private.syms: Export virDomainDefClearDeviceAliases
* src/qemu/qemu_conf.c: Replace use of "nic_name" field with the
  standard device alias
* src/qemu/qemu_driver.c: Clear device aliases at shutdown
2010-01-18 13:38:47 +00:00
Daniel P. Berrange
b030084f07 Auto-add disk controllers based on defined disks
Existing applications using libvirt are not aware of the disk
controller concept. Thus, after parsing the <disk> definitions
in the XML, it is neccessary to create <controller> elements
to satisfy all requested disks, as per their defined drive
addresses

* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/libvirt_private.syms: Add virDomainDefAddDiskControllers()
  method for populating disk controllers, and call it after
  parsing disk definitions.
* src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers()
  when doing ARGV -> XML conversion
* tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller
  data to all data files which don't have it already
2010-01-18 13:35:40 +00:00
Daniel P. Berrange
d78554d884 Specify bus/unit instead of index for disks with QEMU
The current code for using -drive simply sets the -drive 'index'
parameter. QEMU internally converts this to bus/unit depending
on the type of drive. This does not give us precise control over
the bus/unit assignment though. This change switches over to make
libvirt explicitly calculate the bus/unit number.

In addition bus/unit/index are actually irrelevant for VirtIO
disks, since each virtio disk is a separate PCI device. No disk
controller is involved.

Doing the conversion to bus/unit in libvirt allows us to correctly
attach SCSI controllers when required.

* src/qemu/qemu_conf.c: Specify bus/unit instead of index for
  disks
* tests/qemuxml2argvdata/qemuxml2argv-disk*.args: Switch over from
  using index=NNNN, to bus=NN, unit=NN for SCSI/IDE/Floppy disks
2010-01-15 17:55:59 +00:00
Daniel P. Berrange
2982d73a11 Split code for building QEMU -drive arg in separate method
To enable it to be called from multiple locations, split out
the code for building the -drive arg string. This will be needed
by later patches which do drive hotplug, the conversion to use
-device, and the conversion to controller/bus/unit addressing

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add qemuBuildDriveStr
  for building -drive arg string
2010-01-15 17:55:58 +00:00
Daniel P. Berrange
776e37e1eb Set default disk controller/bus/unit props
When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.

* src/conf/domain_conf.h, src/conf/domain_conf.c,
  src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
  for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
  generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
  to all XML files
2010-01-15 16:38:29 +00:00
Daniel Veillard
edcae5a7c4 Qemu: ask for memory preallocation with large pages
The -mem-prealloc flag should be used when using large pages
This ensures qemu tries to allocate all required memory immediately,
rather than when first used. The latter mode will crash qemu
if hugepages aren't available when accessed, while the former
should gracefully fallback to non-hugepages.

* src/qemu/qemu_conf.c: add -mem-prealloc flag to qemu command line
  when using large pages
2010-01-08 12:17:35 +01:00
Adam Litke
7a90f21655 qemu: Always enable the virtio balloon driver
The behavior for the qemu balloon device has changed.  Formerly, a virtio
balloon device was provided by default.  Now, '-balloon virtio' must be
specified on the command line to enable it.  This patch causes libvirt to
add '-balloon virtio' to the command line whenever the -balloon option is
available.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: check for the new flag and
  add "-baloon vitio" to qemu command when needed
* tests/qemuhelptest.c: add the new flag for detection
2010-01-06 18:01:51 +01:00
Daniel P. Berrange
27c357bcfa Disable JSON mode monitor until QEMU is more mature
* src/qemu/qemu_conf.h: Remove QEMU_CMD_FLAG_0_12 and just leave
  the lone JSON flag
* src/qemu/qemu_conf.c: Enable JSON on QEMU 0.13 or later, but
  leave it disabled for now
2009-12-22 11:43:48 +00:00
Jiri Denemark
8153c72b97 Only probe for CPU models if required
* src/qemu/qemu_conf.c: CPU models should be probed only if the
  a guest's XML contains CPU model, not each time a qemu command line
  is generated.
2009-12-22 12:23:56 +01:00
Jiri Denemark
ffb13b1115 Implement CPU selection in QEMU driver
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h src/qemu/qemu_driver.c:
  add the new entry point, extend capabilities and code to interract
  with qemu
2009-12-18 16:24:14 +01:00
Matthias Bolte
2b844f1614 Fix memory leak in qemudBuildCommandLine 2009-12-15 22:53:45 +01:00
Matthew Booth
a8eb010ea2 Make QEMU driver use -chardev everywhere if available
Change -monitor, -serial and -parallel output to use -chardev if it is
available.
* src/qemu/qemu_conf.c: Update qemudBuildCommandLine to use -chardev where
  available.
* tests/qemuxml2argvtest.c tests/qemuxml2argvdata/: Add -chardev equivalents
  for all current serial and parallel tests.
2009-12-14 10:38:44 +01:00
Matthias Bolte
1b9d074493 Add virBufferFreeAndReset() and replace free()
Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.
2009-12-10 00:00:50 +01:00
Daniel P. Berrange
3a4f172fdd Support for JSON mode monitor
Initial support for the new QEMU monitor protocol  using JSON
as the data encoding format instead of plain text

* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
  mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}
2009-12-08 13:46:54 +00:00
Daniel P. Berrange
8f147d16f1 Fix default disk type when parsing QEMU argv
* src/qemu/qemu_conf.c: Fix default disk type to be 'FILE'
  again, after previous commit accidentally changed it
2009-11-24 10:59:05 +00:00
Daniel P. Berrange
e7c78b0a94 Support QEMU's virtual FAT block device driver
Introduce a new type="dir"  mode for <disks> that allows use of
QEMU's  virtual FAT block device driver. eg

    <disk type='dir' device='floppy'>
      <source dir='/tmp/test'/>
      <target dev='fda' bus='fdc'/>
      <readonly/>
    </disk>

gets turned into

  -drive file=fat:floppy:/tmp/test,if=floppy,index=0

Only read-only disks are supported with virtual FAT mode

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
  unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
  empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
  tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
  disk args
* src/security/security_selinux.c: Temporarily skip labelling
  of directory based disks
2009-11-23 12:17:16 +00:00
Steve Yarmie
b827338a72 qemu-kvm needs -enable-kvm flag for VT optimization
Recent qemu releases require command option '-enable-qemu' in order
for the kvm functionality be activated. Libvirt needs to pass this flag
to qemu when starting a domain. Note that without the option,
even if both the kernel and qemu support KVM, KVM will not be activated
and VMs will be very slow.

* src/qemu/qemu_conf.h src/qemu/qemu_conf.c: parse the extra command
  line option from help and add it when running kvm
* tests/qemuhelptest.c: this modified the flags output for qemu-0.10.5
  and qemu-kvm-0.11.0-rc2 regression tests
2009-11-20 15:41:05 +01:00
Matthew Booth
da82b03fb0 Small guestfwd code cleanup
* src/qemu/qemu_conf.c: Remove and inline qemudBuildCommandLineChrDevTargetStr
2009-11-13 16:05:27 +01:00
pritesh
2e23607448 Support for SATA Disks in virDomainDiskBus
* src/conf/domain_conf.h src/conf/domain_conf.c: add the new entry in
  the enum and lists of virDomainDiskBus
* src/qemu/qemu_conf.c: same for virDomainDiskQEMUBus
2009-11-12 15:45:18 +01:00
Ryota Ozaki
6008cfc7c0 Prevent initializing ebtables if disabled in qemu.conf
* src/qemu/qemu_conf.c: don't initialize ebtables if
  disabled
2009-11-11 12:59:54 +01:00
Matthias Bolte
790f0b3057 Add missing OOM error checks, reports and cleanups 2009-11-09 23:17:45 +01:00
Matthew Booth
bb4ec5550b Use virBuffer when building QEMU char dev command line
* src/qemu/qemu_conf.c: Update qemudBuildCommandLineChrDevStr to use a
  virBuffer
2009-11-06 14:44:25 +01:00
Matthew Booth
8f67f6448b Cleanup virBuffer usage in qemdBuildCommandLine
* src/qemu_qemu_conf.c: Cleanup usage of virBuffer in qemudBuildCommandLine
2009-11-06 12:19:21 +01:00
Matthew Booth
af249ea468 Support for <channel> in domain and QEmu backend
allows the following to be specified in a domain:
<channel type='pipe'>
  <source path='/tmp/guestfwd'/>
  <target type='guestfwd' address='10.0.2.1' port='4600'/>
</channel>

* proxy/Makefile.am: add network.c as dep of domain_conf.c
* docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain
  schemas and the parsing/serialization side for the new construct

QEmu support will add the following on the qemu command line:
 -chardev pipe,id=channel0,path=/tmp/guestfwd
 -net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0

* src/qemu/qemu_conf.c: Add argument output for channel
* tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax
2009-11-05 15:31:03 +01:00
Matthew Booth
7400396801 Detect availability of QEMU -chardev CLI option
* src/qemu/qemu_conf.h: defines a new QEMUD_CMD_FLAG_CHARDEV flag
* src/qemu/qemu_conf.c: parse the output for -chardev and set flag
  appropriately
2009-11-05 14:41:24 +01:00
Matthew Booth
89d549c3eb Allow character devices to have different target types
A character device's target (it's interface in the guest) had only a
single property: port. This patch is in preparation for adding targets
which require other properties.
Since this changes the conf type for character devices this affects
a number of drivers:

* src/conf/domain_conf.[ch] src/esx/esx_vmx.c src/qemu/qemu_conf.c
  src/qemu/qemu_driver.c src/uml/uml_conf.c src/uml/uml_driver.c
  src/vbox/vbox_tmpl.c src/xen/xend_internal.c src/xen/xm_internal.c:
  target properties are moved into a union in virDomainChrDef, and a
  targetType field is added to identify which union member should be
  used. All current code which touches a virDomainChrDef is updated both
  to use the new union field, and to populate targetType if necessary.
2009-11-05 14:28:39 +01:00
Gerhard Stenzel
0aa72ac6fd add MAC address based port filtering to qemu
* src/qemu/qemu.conf src/qemu/qemu_conf.c src/qemu/qemu_conf.h: there is
  a new config type option for mac filtering
* src/qemu/qemu_bridge_filter.[ch]: new module for the ebtable entry points
* src/qemu/qemu_driver.c: plug the MAC filtering at the right places
  in the domain life cycle
* src/Makefile.am po/POTFILES.in: add the new module
2009-11-03 23:44:48 +01:00
Cole Robinson
4c44cdcce3 Various error reporting fixes
- Don't duplicate SystemError
- Use proper error code in domain_conf
- Fix a broken error call in qemu_conf
- Don't use VIR_ERR_ERROR in security driver (isn't a valid code in this case)
2009-11-03 16:46:54 -05:00
Daniel P. Berrange
46992453b9 Annotate many methods with ATTRIBUTE_RETURN_CHECK & fix problems
Nearly all of the methods in src/util/util.h have error codes that
must be checked by the caller to correct detect & report failure.
Add ATTRIBUTE_RETURN_CHECK to ensure compile time validation of
this

* daemon/libvirtd.c: Add explicit check on return value of virAsprintf
* src/conf/domain_conf.c: Add missing check on virParseMacAddr return
  value status & report error
* src/network/bridge_driver.c: Add missing OOM check on virAsprintf
  and report error
* src/qemu/qemu_conf.c: Add missing check on virParseMacAddr return
  value status & report error
* src/security/security_selinux.c: Remove call to virRandomInitialize
  that's done in libvirt.c already
* src/storage/storage_backend_logical.c: Add check & log on virRun
  return status
* src/util/util.c: Add missing checks on virAsprintf/Run status
* src/util/util.h: Annotate all methods with ATTRIBUTE_RETURN_CHECK
  if they return an error status code
* src/vbox/vbox_tmpl.c: Add missing check on virParseMacAddr
* src/xen/xm_internal.c: Add missing checks on virAsprintf
* tests/qemuargv2xmltest.c: Remove bogus call to virRandomInitialize()
2009-11-02 11:09:03 -05:00
Matthias Bolte
dfdfc601ac Fix error message in qemudLoadDriverConfig()
* src/qemu/qemu_conf.c: change the error message to refer to
  'cgroup_controllers' instead of 'cgroup_device_acl'
2009-10-26 23:30:19 +01:00
Richard Jones
08bed02515 Support QEMU watchdog device.
This adds simple support for configuring a guest with a QEMU/KVM
virtual hardware watchdog device.
2009-10-21 16:37:44 +01:00
Mark McLoughlin
2210f8a3a8 Don't copy old machines from a domain which has none
If the the qemu and kvm binaries are the same, we don't include machine
types in the kvm domain info.

However, the code which refreshes the machine types info from the
previous capabilities structure first looks at the kvm domain's info,
finds it matches and then copies the empty machine types list over
for the top-level qemu domain.

That doesn't make sense, we shouldn't copy an empty machin types list.

* src/qemu/qemu_conf.c: qemudGetOldMachinesFromInfo(): don't copy an
  empty machine types list.
2009-10-15 13:27:57 +01:00
Chris Lalancette
b013ebc3b2 Add a qemu feature flag for unix socket migration.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-09-30 14:06:12 +02:00
Daniel P. Berrange
b08e6d38ae Allow control over QEMU audio backend
When using VNC for graphics + keyboard + mouse, we shouldn't
then use the host OS for audio. Audio should go back over
VNC.

When using SDL for graphics, we should use the host OS for
audio since that's where the display is. We need to allow
certain QEMU env variables to be passed through to guest
too to allow choice of QEMU audio backend.

* qemud/libvirtd.sysconf: Mention QEMU/SDL audio env vars
* src/qemu_conf.c: Passthrough QEMU/SDL audio env for SDL display,
  disable host audio for VNC display
2009-09-29 15:53:10 +01:00
Daniel P. Berrange
4c10127b2c Add API for issuing 'host_net_add' monitor command
* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Remove prefix arg
  from qemuBuildHostNetStr which is no longer required
* src/qemu/qemu_driver.c: Refactor to use qemuMonitorAddHostNetwork()
  API for adding host network
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
  qemuMonitorAddHostNetwork() method for adding host networks
2009-09-29 12:20:56 +01:00
Daniel P. Berrange
f8d54e7c94 Add API for issuing 'pci_add nic' monitor command
* src/qemu/qemu_conf.c: Remove separator from qemuBuildNicStr()
  args, and remove hardcoded 'nic' prefix. Leave it upto callers
  instead
* src/qemu/qemu_driver.c: Switch over to using the new
  qemuMonitorAddPCINetwork() method for NIC hotplug
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
  qemuMonitorAddPCINetwork API for PCI network device hotplug
2009-09-29 12:20:56 +01:00
Chris Lalancette
03d777f345 Introduce virStrncpy.
Add the virStrncpy function, which takes a dst string, source string,
the number of bytes to copy and the number of bytes available in the
dest string.  If the source string is too large to fit into the
destination string, including the \0 byte, then no data is copied and
the function returns NULL.  Otherwise, this function copies n bytes
from source into dst, including the \0, and returns a pointer to the
dst string.  This function is intended to replace all unsafe uses
of strncpy in the code base, since strncpy does *not* guarantee that
the buffer terminates with a \0.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-09-22 20:10:00 +02:00
Daniel P. Berrange
b81a7ece97 Fix handling of Xen(ner) detection
Latest upstream QEMU can be built with Xen support, which introduces
a -xen-domid argument. This was  mistakenly detected as -domid due
to old Xenner support. Adapt to cope with both syntax. Also only
set domid if the virt type is xen, or the guest type is xen

* src/qemu_conf.c, src/qemu_conf.h: Detect new -xen-domid flag in
  preference to -domid.
* tests/qemuxml2argvdata/qemuxml2argv-bootloader.args,
  tests/qemuxml2argvdata/qemuxml2argv-input-xen.args: Add missing
  -domid param
* tests/qemuxml2argvdata/qemuxml2argv-misc-uuid.args: Remove bogus
  -boot param.
* tests/qemuxml2argvtest.c: Add missing QEMUD_CMD_FLAG_DOMID params
2009-09-22 16:13:33 +01:00
Chris Lalancette
aabafbea1d Simple fix of a comment in qemuStringToArgvEnv.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-09-21 18:15:31 +02:00
Daniel P. Berrange
58355a5bfb Move QEMU driver to src/qemu/
* src/qemu_conf.c, src/qemu_conf.h, src/qemu_driver.c,
  src/qemu_driver.h: Move to src/qemu/
* daemon/qemud.c, src/Makefile.am, tests/qemuargv2xmltest.c,
  tests/qemuhelptest.c, tests/qemuxml2argvtest.c,
  tests/qemuxml2xmltest.c: Adapt for changed paths
2009-09-21 14:41:43 +01:00