When you set metadata with type element like the following:
dom.setMetadata(libvirt.VIR_DOMAIN_METADATA_ELEMENT, "<test/>", 'abc', "HAHAH", 0)
Then for `virsh event --all`, then it will output this message:
event 'metadata-change' for domain 'rhel9': element HAHAH
The message is ambiguous since it looks like the params for
metadata-change event is the element HAHAH. Actually that means the type is
element while the url is HAHAH. Let's make it more clear.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
* XML serialization and deserialization of PCI VPD;
* PCI VPD capability flags added and used in relevant places;
* XML to XML tests for the added capability.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Issuing simple QMP commands is pain as they need to be wrapped by the
JSON wrapper:
{ "execute": "COMMAND" }
and optionally also:
{ "execute": "COMMAND", "arguments":...}
For simple commands without arguments we can add syntax sugar to virsh
which allows simple usage of QMP and additionally prepares also for
passing through of the 'arguments' section:
virsh qemu-monitor-command $VM query-status
is equivalent to
virsh qemu-monitor-command $VM '{"execute":"query-status"}'
and
virsh qemu-monitor-command $VM query-named-block-nodes '{"flat":true}'
or
virsh qemu-monitor-command $VM query-named-block-nodes '"flat":true'
is equivalent to
virsh qemu-monitor-command $VM '{"execute":"query-named-block-nodes", "arguments":{"flat":true}}'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virt-host-validate checks if AMD SEV is enabled by verifying
/sys/module/kvm_amd/parameters/sev is set to '1'. On a system
running kernel 5.13, the parameter is reported as 'Y'. To be
extra paranoid, add a check for 'y' along with 'Y' to complement
the existing check for '1'.
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1188715
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are few places where we can replace explicit
VIR_FORCE_CLOSE() with VIR_AUTOCLOSE annotation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Currently the order of virshXXXFree functions in the header file
does not correspond to the order in the corresponding .c file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
The --nvram and --keep-nvram options of the undefine command can
be used regardless of the domain status (the only consumer so far
- qemuDomainUndefineFlags() doesn't care about the domain
status). Yet, their corresponding help strings say something
about inactive domains while manpage says nothing. Remove the
reference to domain state.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2007659
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
New 'update-memory-device' command is introduced which aims on
making it user friendly to change <memory/> device. So far I just
need to change <requested/> so I'm introducing --requested-size
only; but the idea is that this is extensible for other cases
too. For instance, want to change <myElement/>? A new
--my-element argument can be easily introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As advertised in previous commit, this event is delivered to us
when virtio-mem module changes the allocation inside the guest.
It comes with one attribute - size - which holds the new size of
the virtio-mem (well, allocated size), in bytes.
Mind you, this is not necessarily the same number as 'requested
size'. It almost certainly will be when sizing the memory up, but
it might not be when sizing the memory down - the guest kernel
might be unable to free some blocks.
This current size is reported in the domain XML as an output
element only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I removed else branches after return/break as they are not
necessary and the code looks cleaner without them.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch also includes use of an early return in case of an
error. I think the changes make the functions more readable.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If there was added a new return value indicating success to the
function virDomainMigrateSetMaxDowntime() in the future, because
of the way the function is called it would be treated it as an
error state and would return false (indicating failure). This
patch fixes it, so that the call of the function follows the same
pattern as is currently set in libvirt.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Both function description and function itself mention check for
OOM which can't happen really. There was a bug in glib where
g_strdup_*() might have not aborted on OOM, but we have our own
implementation when dealing with broken glib (see
vir_g_strdup_printf()). Therefore, checking for OOM is redundant
and can never be true.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's check whether a boolean --option doesn't have completer or
completer_flags set. These options are just flags and don't
accept any value, thus they can't have any completer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a command is an alias, then it can only have .name, .flags and
.alias set and .flags should contain just VSH_CMD_FLAG_ALIAS.
Check if that's the case in self-test.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The vol-download command takes mandatory --file argument which
points to a local (possibly non-existent) path. If the file
exists then it's overwritten. Set the argument's completer so
that self-test doesn't report it as missing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The screenshot command takes optional --file argument which can
point to an existing local path (in which case the file is
overwritten). Set the argument's completer so that self-test
doesn't report it as missing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch includes:
* removal of dead code
* simplifying nested if conditions
* removal of unnecessary variables
* usage of "direct" boolean return
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's now also used in vshCompleteHelpCommand which is outside of the
conditionally compiled code.
Fixes: 80f70c74a7
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Complete with the indexed targets (e.g. vda[3]) based on existing
indexes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now this serves just as an annotation because readline and also the
bash completion script insist on completing local paths when an empty
list is returned.
This will serve for future reference once we'll be able to properly
refuse to suggest anything.
The completer is used for fields such as names for new objects,
description strings, password strings etc, URIs and hostnames which we
can't feasibly autocomplete.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now the completion does the correct thing of completing a local path
if NULL is returned.
Introduce 'virshCompletePathLocalExisting' and use it in the
'VIRSH_COMMON_OPT_FILE' macro.
This for now serves as an annotation for the function which want to read
a file on the host running virsh. In the future this can be used with a
more sophisticated implementation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In cases such as the APIs for managed save management, the file path
provided via the '--file' option is passed to the API.
We'll need to make them distinct from cases for when virsh is using the
file so that different completers can be used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
