SeaBIOS >= 1.11 has built-in support for outputting to the serial
console when QEMU sets -M graphics=off. Our minimum QEMU version
is 2.11.0, which bundled SeaBIOS 1.11. Thus we have no need to
use '-device sga' anymore.
This change results in a slight layout difference for option ROMs
in memory, however, it does not affect the migration data stream
format on the wire and once migration is complete the target QEMU
memory layout for ROMs matches the source QEMU once again.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Cover the case of missing disk target to cover the case fixed by
previous commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patches will modify how '-no-reboot' is handled when qemu
supports the 'set-action' QMP command. Add a test for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This one will be slightly unstable given that CPU features are being
modified frequently in qemu especially when used with a modern cpu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The host model expansion depends on the capability data, so in this case
it makes sense to have specific invocations of the test for all qemu
versions we have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to q35 in anticipation of using DO_TEST_CAPS* in further patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the larger number in the original test to avoid having two files.
Additionally this avoids use of 'host-model' with DO_TEST_CAPS_LATEST in
cases when it isn't necessary for the purpose of the test as the CPU
model tends to change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This essentially reverts:
commit ca5c8e1dc7
qemuxml2argvtest: Avoid conditions in test macro
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pass a pointer to the 'ret' variable to the test executor itself and
update it there to improve compile times of the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously we've ran into problems when 'testQemuInfoSetArgs' failed as
calling the actual test executor could lead to a crash if the data
wasn't prepared but reporting an error doesn't play nicely with our test
output which is handled by 'virTestRun'.
To avoid the issue (and as a side effect improve compilation times of
the test files) split up testQemuInfoSetArgs into two functions.
The first is still called 'testQemuInfoSetArgs' and just blindly
populates arguments into a sub-struct of testQemuInfo. This function no
longer reports errors
A new function 'testQemuInfoInitArgs' which is meant to be called from
the test executor then checks errors and prepares the test data. This
one can fail and the test will be marked as failed appropriately.
A nice side effect is that this vastly improves compile times of
qemuxml2xmltest and qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We pass multiple caching objects to individual tests which don't change.
To prevent always having to pass them individually to
'testQemuInfoSetArgs' introduce 'struct testQemuConf' which will hold
all of them and just the struct will be passed to the tests.
Additionally this will make the conf available from inside the test run.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a explicit version of our test invocation macro for tests which use
no capabilities.
This removes the usage of the somewhat anonymous 'NONE' macro and will
lead to simplification of the code later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a explicit version of our test invocation macro for tests which use
no capabilities.
This reduces the usage of the somewhat anonymous 'NONE' macro and will
lead to simplification of the code later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a explicit version of our test invocation macro for tests which use
no capabilities.
This reduces the usage of the somewhat anonymous 'NONE' macro and will
lead to simplification of the code later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'DO_TEST_FULL' isn't a useful wrapper any more. Use the better name for
the main macro and replace all uses.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'DO_TEST_FULL' macro was ending the argument list which was being
started in other macros. Move it so that 'ARG_QEMU_CAPS' and
'QEMU_CAPS_LAST' are always used in the same macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The string "aarch64" is passed in place of capability flags. We were lucky
that the pointer was always more than QEMU_CAPS_LAST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The string "ppc64" is passed in place of capability flags. We were lucky
that the pointer was always more than QEMU_CAPS_LAST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All modern qemus support sandboxing so this is covered by other tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The feature is supported by all supported qemu versions thus covered
thoroughly by other test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test is now pointless since we always assume that this option is
present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
They are no longer used as we now assume that all tuning caps are
present and in case some will be removed we'll need to use different
probing methods.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it more obvious that we care about passing FDs on the commandline
before startup of qemu, which is used to avoid startup monitor polling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming commit will always add the property so the negative tests would
stop working.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add launch security type 's390-pv' as well as some tests.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It is possible to define/edit(in shut off state) a domain XML with
same hostdev device repeated more than once, as shown below. This
behavior is not expected. So, this patch fixes it.
vser1:
<domain type='kvm'>
[...]
<devices>
[...]
<hostdev mode='subsystem' type='mdev' managed='no' model='vfio-ccw'>
<source>
<address uuid='8e782fea-e5f4-45fa-a0f9-024cf66e5009'/>
</source>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0005'/>
</hostdev>
<hostdev mode='subsystem' type='mdev' managed='no' model='vfio-ccw'>
<source>
<address uuid='8e782fea-e5f4-45fa-a0f9-024cf66e5009'/>
</source>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0006'/>
</hostdev>
[...]
</devices>
</domain>
$ virsh define vser1
Domain 'vser1' defined from vser1
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already reject TPM 1.2 in a number of scenarios; let's add
ARM virt guests to the list.
https://bugzilla.redhat.com/show_bug.cgi?id=1970310
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Next commit will modify the code so that it validates whether
egl-headless is present. Certain tests need to get the egl-headless
capability to keep working properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Next commit will modify the code so that it validates whether SDL is
present. Certain tests need to get the SDL capability to keep working
properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Base the check on the logic from qemuDomainCheckCCWS390AddressSupport,
which will be removed later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flag isn't used by the code in any way so it can be dropped from the
legacy test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Give the test QEMU_CAPS_CCW instead of QEMU_CAPS_VIRTIO_S390 since the
latter can never be asserted any more. This preserves what the tests
wants to check so that QEMU_CAPS_VIRTIO_S390 can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 's390-virtio' machine was removed from qemu in the 2.6 release.
Use the more modern s390-ccw-virtio machine type and use
VIR_TEST_CAPS_ARCH_LATEST to invoke it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 's390-virtio' machine was removed from qemu in the 2.6 release.
Use the more modern s390-ccw-virtio machine type and use
VIR_TEST_CAPS_ARCH_LATEST to invoke it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the console, disk, and network test for the legacy s390 machine
which was removed in qemu 2.6. All of these have 'ccw' equivalents.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 's390-virtio' machine was removed from qemu in the 2.6 release.
Modernize the test for sclp console since there isn't any other test for
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 's390-virtio' machine was removed from qemu in the 2.6 release.
Modernize the test for diag288 since there isn't any other test for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The switch to internal linebreaking of arguments caused a problem when
generating .args files with VIR_TEST_REGENERATE_OUTPUT as the last
argument isn't terminated with a newline.
Switch to using virCommandToStringBuf and append a newline.
Fixes: 0046e0b1c2
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU 6.0.0 introduced `confidential-guest-support` -machine option as
a replacement for `memory-encryption`. In order to test it use 6.0.0
capabilities as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There were two negative tests for the keywrapping feature on s390 when
the feature flag was missing. For now both shared the error message thus
worked fine, but with the upcoming patch to move some disk validation
code from the command line formatter to validation code will change the
error message in case the disk capabilities are missing.
Drop the test cases which don't provide any capability and keep those
that have the disk capabilities present as they are sufficient to prove
the feature.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU is dropping sheepdog support in 6.1 so we need to limit the test
case to the latest version supporting sheepdog as it won't be described
by the QMP schema any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
A secret can be marked with the "private" attribute. The intent was that
it is not possible for any libvirt client to be able to read the secret
value, it would only be accesible from within libvirtd. eg the QEMU
driver can read the value to launch a guest.
With the modular daemons, the QEMU, storage and secret drivers are all
running in separate daemons. The QEMU and storage drivers thus appear to
be normal libvirt client's from the POV of the secret driver, and thus
they are not able to read a private secret. This is unhelpful.
With the previous patches that introduced a "system token" to the
identity object, we can now distinguish APIs invoked by libvirt daemons
from those invoked by client applications.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When fetching the value of a private secret, we need to use an elevated
identity otherwise the secret driver will deny access.
When using the modular daemons, the elevated identity needs to be active
before the secret driver connection is opened, and it will apply to all
APIs calls made on that conncetion.
When using the monolithic daemon, the identity at time of opening the
connection is ignored, and the elevated identity needs to be active
precisely at the time the virSecretGetValue API call is made.
After acquiring the secret value, the elevated identity should be
cleared.
This sounds complex, but is fairly straightfoward with the automatic
cleanup callbacks.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
