Currently qemuMonitorOpen() requires an address of the QEMU
monitor. When doing QMP based capabilities detection it is
easier if a pre-opened FD can be provided, since then the
monitor can be run on the STDIO console. Add a new API
qemuMonitorOpenFD() for such usage
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Historically, the first <console> element is treated as the
alias of a <serial> device. In the virDomainDeviceInfoIterate,
This situation is not considered. It still handles the first <console>
element as another devices, which means that for console[0] with
serial targetType, it calls callback function another time.
It will cause the problem of address conflicts when assigning
spapr-vio address for serial device on pSeries guest.
For pSeries guest, the serial configuration in the xml file
is as the following:
<serial type='pty'>
<target port='0'/>
<address type='spapr-vio'/>
</serial>
Console configuration is default, the dumped xml file is as the following:
<serial type='pty'>
<source path='/dev/pts/5'/>
<target port='0'/>
<alias name='serial0'/>
<address type='spapr-vio' reg='0x30000000'/>
</serial>
<console type='pty' tty='/dev/pts/5'>
<source path='/dev/pts/5'/>
<target type='serial' port='0'/>
<alias name='serial0'/>
<address type='spapr-vio' reg='0x30000000'/>
</console>
It shows that the <console> device is the alias of serial device.
So its address is the same as the serial device. When detecting
the conflicts in the qemuAssignSpaprVIOAddress the first console
and the serial device conflicts because virDomainDeviceInfoIterate()
still handle these as two different devices, and in the qemuAssignSpaprVIOAddress(),
it will compare these two devices' addressed. If they have same address,
it will report address conflict error.
So this patch is to handle the first console which targetType is serial
as the alias of serial device to avoid address conflicts error reported.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
The implementation is done manually as the generator does not support
wrapping lists of C pointers into Python objects.
python/libvirt-override-api.xml: Document
python/libvirt-override-virConnect.py:
* New file, includes implementation of listAllInterfaces.
python/libvirt-override.c: Implementation for the wrapper.
tools/virsh-interface.c:
* vshInterfaceSorter to sort interfaces by name
* vshInterfaceListFree to free the interface objects list.
* vshInterfaceListCollect to collect the interface objects, trying
to use new API first, fall back to older APIs if it's not supported.
This is not that ideal as API for other objects, as it's still
O(n). Because interface driver uses netcf APIs to manage the
stuffs, instead of by itself. And netcf APIs don't return a object.
It provides APIs like old libvirt APIs:
ncf_number_of_interfaces
ncf_list_interfaces
ncf_lookup_by_name
......
Perhaps we should further improve netcf to let it provide an API
to return the object, but it could be a later patch. And anyway,
we will still benefit from the new API for the simplification,
and no race like the old APIs.
src/interface/netcf_driver.c: Implement listAllInterfaces
The RPC generator doesn't support returning list of object yet, this patch
do the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchConnectListAllInterfaces.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllInterfaces.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_INTERFACES and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
This is to list the interface objects, supported filtering flags
are: active|inactive.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllInterfaceFlags
and virConnectListAllInterfaces.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllInterfaces)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
The new_params variable must be initialized in case the
virDomainGetSchedulerParameters call fails and we hit the cleanup
section before actually allocating the new parameters.
Signed-off-by: Federico Simoncelli <fsimonce@redhat.com>
Links to the FAQ didn't work on pages in subdirectories, like
devhelp/libvirt-virterror.html or internals/command.html, because
they have had href_base prepended to them.
The remote driver first looks at the libvirt auth config file to
fill in any credentials. It then invokes the auth callback for
any remaining credentials. It was accidentally invoking the
auth callback even if there were not any more credentials
required.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
All public API functions must call virResetLastError to clear
out any previous error. The virConnectOpen* functions forgot
to do this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When deciding whether to provide an auth function callback
in openAuth(), credcb was checked against NULL, when it
really needs to be checked against Py_None
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If an exception occurs in the python callback for openAuth()
the stack trace isn't seen by the apps, since this code is
called from libvirt context. To aid diagnostics, print the
error to stderr at least
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If passing a 'credtype' parameter which was an empty list
to the python openAuth() API, the 'credtype' field in
the virConnectAuth struct would not be initialized. This
lead to a crash when later trying to free that field.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The implementation is done manually as the generator does not support
wrapping lists of C pointers into Python objects.
python/libvirt-override-api.xml: Document
python/libvirt-override-virConnect.py: Implement listAllNetworks.
python/libvirt-override.c: Implementation for the wrapper.
tools/virsh-network.c:
* vshNetworkSorter to sort networks by name
* vshNetworkListFree to free the network objects list.
* vshNetworkListCollect to collect the network objects, trying
to use new API first, fall back to older APIs if it's not supported.
* New options --persistent, --transient, --autostart, --no-autostart,
for net-list, and new field 'Persistent' for its output.
tools/virsh.pod:
* Add documents for the new options.
src/conf/network_conf.c: Add virNetworkMatch to filter the networks;
and virNetworkList to iterate over all the networks with the filter.
src/conf/network_conf.h: Declare virNetworkList and define the macros
for filters.
src/libvirt_private.syms: Export virNetworkList.
The RPC generator doesn't support returning list of object, this patch
do the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchConnectListAllNetworks.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllNetworks.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_NETWORKS and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
This is to list the network objects, supported filtering flags
are: active|inactive, persistent|transient, autostart|no-autostart.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllNetworkFlags
and virConnectListAllNetworks.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNetworks)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
e5a1bee07 introduced a regression in Boxes: when Boxes is left idle
(it's still doing some libvirt calls in the background), the
libvirt connection gets closed after a few minutes. What happens is
that this code in virNetClientIOHandleOutput gets triggered:
if (!thecall)
return -1; /* Shouldn't happen, but you never know... */
and after the changes in e5a1bee07, this causes the libvirt connection
to be closed.
Upon further investigation, what happens is that
virNetClientIOHandleOutput is called from gvir_event_handle_dispatch
in libvirt-glib, which is triggered because the client fd became
writable. However, between the times gvir_event_handle_dispatch
is called, and the time the client lock is grabbed and
virNetClientIOHandleOutput is called, another thread runs and
completes the current call. 'thecall' is then NULL when the first
thread gets to run virNetClientIOHandleOutput.
After describing this situation on IRC, danpb suggested this:
11:37 < danpb> In that case I think the correct thing would be to change
'return -1' above to 'return 0' since that's not actually an
error - its a rare, but expected event
which is what this patch is doing. I've tested it against master
libvirt, and I didn't get disconnected in ~10 minutes while this
happens in less than 5 minutes without this patch.
The implementation is done manually as the generator does not support
wrapping lists of C pointers into Python objects.
python/libvirt-override-api.xml: Document
python/libvirt-override-virStoragePool.py:
* New file, includes implementation of listAllVolumes.
python/libvirt-override.c: Implementation for the wrapper.
tools/virsh-volume.c:
* vshStorageVolSorter to sort storage vols by name
* vshStorageVolumeListFree to free the volume objects list
* vshStorageVolumeListCollect to collect the volume objects, trying
to use new API first, fall back to older APIs if it's not supported.
The RPC generator doesn't returning support list of object, this
patch do the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchStoragePoolListAllVolumes
* src/remote/remote_driver.c:
Add remote driver handler remoteStoragePoolListAllVolumes
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_STORAGE_POOL_LIST_ALL_VOLUMES and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
Simply returns the storage volume objects. No supported filter
flags.
include/libvirt/libvirt.h.in: Declare the API
python/generator.py: Skip the function for generating. virStoragePool.py
will be added in later patch.
src/driver.h: virDrvStoragePoolListVolumesFlags
src/libvirt.c: Implementation for the API.
src/libvirt_public.syms: Export the symbol to public
An email came to libvir-list wondering why the git send-email command
was missing in spite of having git installed; this is due to the
send-email command being in a sub-package of the main git package.
While touching the hacking file, I thought it would be useful to 1)
indicate the location of the source (docs/hacking.html.in) in the
message at the top of HACKING, and also to make the note about running
"make check" and "make syntax-check" a bit more stern.
On RHEL 6.2, gcc 4.4.6 complains:
cc1: warning: command line option "-Wenum-compare" is valid for C++/ObjC++ but not for C
which in turn breaks a -Werror build.
Meanwhile, in Fedora 17, gcc 4.7.0, -Wenum-compare has been enhanced
to also work on C, but at the same time, it is documented that -Wall
now implicitly includes -Wenum-compare.
Therefore, it is sufficient to remove explicit checks for this option,
avoiding the warning from older gcc while still getting the
compile-time safety from newer gcc.
* m4/virt-compile-warnings.m4 (-Wenum-compare): Omit explicit check.
GNOME Boxes sometimes stops getting domain events from libvirtd, even
after restarting it. Further investigation in libvirtd shows that
events are properly queued with virDomainEventStateQueue, but the
timer virDomainEventTimer which flushes the events and sends them to
the clients never gets called. Looking at the event queue in gdb
shows that it's non-empty and that its size increases with each new
events.
virDomainEventTimer is set up in virDomainEventStateRegister[ID]
when going from 0 client connecte to 1 client connected, but is
initially disabled. The timer is removed in
virDomainEventStateRegister[ID] when the last client is disconnected
(going from 1 client connected to 0).
This timer (which handles sending the events to the clients) is
enabled in virDomainEventStateQueue when queueing an event on an
empty queue (queue containing 0 events). It's disabled in
virDomainEventStateFlush after flushing the queue (ie removing all
the elements from it). This way, no extra work is done when the queue
is empty, and when the next event comes up, the timer will get
reenabled because the queue will go from 0 event to 1 event, which
triggers enabling the timer.
However, with this Boxes bug, we have a client connected (Boxes), a
non-empty queue (there are events waiting to be sent), but a disabled
timer, so something went wrong.
When Boxes connects (it's the only client connecting to the libvirtd
instance I used for debugging), the event timer is not set as expected
(state->timer == -1 when virDomainEventStateRegisterID is called),
but at the same time the event queue is not empty. In other words,
we had no clients connected, but pending events. This also explains
why the timer never gets enabled as this is only done when an event
is queued on an empty queue.
I think this can happen if an event gets queued using
virDomainEventStateQueue and the client disconnection happens before
the event timer virDomainEventTimer gets a chance to run and flush
the event. In this situation, virDomainEventStateDeregister[ID] will
get called with a non-empty event queue, the timer will be destroyed
if this was the only client connected. Then, when other clients connect
at a later time, they will never get notified about domain events as
the event timer will never get enabled because the timer is only
enabled if the event queue is empty when virDomainEventStateRegister[ID]
gets called, which will is no longer the case.
To avoid this issue, this commit makes sure to remove all events from
the event queue when the last client in unregistered. As there is
no longer anyone interested in receiving these events, these events
are stale so there is no need to keep them around. A client connecting
later will have no interest in getting events that happened before it
got connected.
When building RPMs the host kernel cannot be assumed to match
the target OS kernel. Thus auto-detecting /selinux vs
/sys/fs/selinux based on the host kernel can result in the
wrong choice (eg F18 builds on a RHEL6 host kernel)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The introduction of /sys/fs/cgroup came in fairly recent kernels.
Prior to that time distros would pick a custom directory like
/cgroup or /dev/cgroup. We need to auto-detect where this is,
rather than hardcoding it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Take advantage of the previously added monitor helpers to
create a test suite for the QEMU JSON monitor impl. As a
proof of concept, this tests the 'qemuMonitorGetStatus'
implementation
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To be able to test the QEMU monitor code, we need to have a fake
QEMU monitor server. This introduces a simple (dumb) framework
that can do this. The test case registers a series of items to
be sent back as replies to commands that will be executed. A
thread runs the event loop looking for incoming replies and
sending back this pre-registered data. This allows testing all
QEMU monitor code that deals with parsing responses and errors
from QEMU, without needing QEMU around
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add some non-null annotations to qemuMonitorOpen and also
check that the error callback is set, since it is mandatory
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If there is only one detail string for a particular event, we need to pu
comma after the string otherwise the string itself will be taken as a
list and only its first character will be printed out. For example,
myDomainEventCallback1 EVENT: Domain fedora17(12) Shutdown F
instead of the desired
myDomainEventCallback1 EVENT: Domain fedora17(12) Shutdown Finished
The unused reason parameter of PM{Suspend,Wakeup} event callbacks was
completely ignored in lot of places and those events were not actually
working at all.
When setting the cpu tunables in virsh you are able to update only a
subset of them. Virsh while doing the update updated all of the
tunables, changed ones with new values and unchanged with old ones.
This is unfortunate as it:
a) might overwrite some other change by a race condition (unprobable)
b) fails with range checking as some of the old values saved might be
out of range
This patch changes the update procedure so that only the changed value
is updated on the host.
This patch also fixes a very unprobable memory leak if the daemon would
return a string tunable parameter, as the typed parameter array was not
cleared.
