Assume that QEMU_CAPS_BLOCKDEV is present and remove all code executed
when it's not.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The migration code was using few blockdev bits before blockdev was
fully integrated to allow TLS with NBD.
Since we now always use blockdev we can remove the check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We no longer need the arguments which were conditionally filled based on
presence of the QEMU_CAPS_BLOCKDEV feature.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume that QEMU_CAPS_BLOCKDEV is present and remove all code executed
when it's not.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In one of early iterations of the gluster driver 'tcp' was used instead
of 'inet' and 'socket' instead of 'path' for unix sockets. All of this
can be now removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that QEMU_CAPS_BLOCKDEV_HOSTDEV_SCSI is always set we can remove the
code which handled cases when the capability was not set.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device_id' property of 'scsi_disk' was added in qemu-4.0 and it's
unconditionally present, thus we can now always assume its presence.
Update some fake-caps test which didn't yet assert the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code which fills 'qomName' does so only when the blockdev capability
is enabled so we don't have to check it separately as it can be only
non-NULL when blockdev is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cleanup of the code to always assume support for QEMU_CAPS_BLOCKDEV
will not be simple, so for now we hardcode the support and the code will
be cleaned up gradually.
We also disallow users to clear the flags via the namespace property or
qemu.conf configuration.
The change to the PPC64 test data originates from the fact that the
capability dump is not from the release version but is lacking one of
the necessary flags to enable -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
luks-encrypted QCOW2 files were introduced in qemu-2.6 unconditionally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Discard and zero-detection for disk sources is supported since qemu-2.1
so we can always assume it's supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The debug level of gluster backend became configurable in qemu-2.8.
This also removes the only old-style syntax for the 'blockdev-add'
command prior to stabilization.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'debug' level for the gluster driver was added in qemu-2.8
unconditionally so libvirt can always assume it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Active block commit is supported since qemu-2.0
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Active layer block commit is unconditionally supported since qemu-2.0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'change-backing-file' command is unconditionally supported since
qemu-2.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'change-backing-file' command was added in qemu-2.1 and doesn't have
any dependencies. We use it as witness for using blockjobs with relative
backing paths. Always assume it's supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now only support qemu versions which already have the capability so
we can remove this now unused code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename qemuBuildAudioCommandLineArgs to qemuBuildAudioCommandLine and
fix the arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the old now unused code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Generate only new version of the '-audiodev' commandline. The leftover
old code and validation will be removed in subsequent patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Per [1] the Debian 10 reaches EOL in August of 2022. This allows us to
bump the minimum supported qemu version to qemu-4.2 which will also
allow us to do significant cleanups.
This commit bumps the minimum qemu verison and updates the corresponding
docs.
[1]: https://wiki.debian.org/DebianReleases
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller doesn't check the return value and actually doesn't have
one either. Remove the return value and adjust return statements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we started handling the monitor EOF event inside a job any code
which uses virDomainObjWait would no longer properly abort in case when
the VM crashed during the wait.
This is because virDomainObjWait uses virDomainObjIsActive which checks
'vm->def->id' to see if the VM is still active. Unfortunately the domain
id is cleared in qemuProcessStop which is run only inside the job.
To fix this we can use the 'beingDestroyed' flag stored in the VM
private data which is set to true around the time when the condition is
signalled.
Reported-by: Pavel Hrdina <phrdina@redhat.com>
Fixes: 8c9ff9960b29d4703a99efdd1cadcf6f48799cc0
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemu code will need to check other qemu-private conditions when
reporting success for waiting. Thus we must replace all use of it with a
qemu-specific helper. For now the helper forwards directly to
virDomainObjWait.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It would be nice to be able to test the mediated device capabilities
without having physical hardware which supports it. The 'mtty' kernel
module presents a virtual parent device which is capable of creating
'fake' mediated devices, and as such it would be useful for testing.
However, the 'mtty' device is not part of an existing device subsystem
(e.g. PCI, etc), so libvirt ignores it and it does not get added to the
node device list. And because it does not get added to the node device
list, it cannot be used to create child mdevs using `virsh
nodedev-create`.
There is already a node device type capability
VIR_NODE_DEV_CAP_MDEV_TYPES that indicates whether a device supports
creating child mediated devices, but libvirt assumes that this is a
nested capability (in other words, it assumes that the primary
capability of a device is something like PCI). If we allow this
MDEV_TYPES capability to be a primary device capability, then we can
support virtual devices like 'mtty' as a parent for mediated devices.
See https://bugzilla.redhat.com/show_bug.cgi?id=2107031
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We need to do this so that we can mock it in the test suite.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Tested-by: Christophe de Dinechin <dinechin@redhat.com>
We need this callback structure for qemu driver only, but it
makes more sense to include it in the virDomainJobObj in case of
other future additions than as a parameter of a beginJob
functions.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch adds a new variable maxQueuedJobs into the job object
as it is the last hypervisor-based part of the begin job. Since
this patch, it will not be necessary to propagate driver
structure into the job functions.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
It makes sense to move this to other hypervisor-based functions
into the private job callback structure to make begin job
general.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The virMacMap module is used only for libvirt_guests NSS module
as it records list of MAC addresses used by certain guest. But
the module itself is usable if and only if the network assigns IP
addresses (i.e. has dnsmasq running). If it's some other
authority that assigns IP addresses then we do not need the
virMacMap module at all.
For instance, a network with no <forward/> type and no DHCP set
won't create /var/lib/libvirt/dnsmasq/ dir which is what the
module expects to exist. But there's no need for the module to
even care about such network.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/348
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, whenever virNetworkObjSetMacMap() is called the same
pattern is used:
1) call virMacMapFileName() to generate a filename,
2) pass this filename to virMacMapNew(), and finally
3) pass retval from previous step to virNetworkObjSetMacMap().
Move this code into a helper (networkSetMacMap()) and replace
both pattern occurrences with its call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virNetworkObjSetMacMap() API effectively steals passed
@macmap argument. However, the argument is a plain, first order
pointer. This requires every caller to set the argument to NULL
after the function was called. Let's make the function take
double pointer instead to make it obvious that the argument is
consumed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's annotate virMacMap variables in bridge_driver.c with
g_autoptr() so that they are automatically freed upon error. This
may look like a needless commit, since there's no memory leak
currently, but it simplifies the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The networkStartNetworkVirtual() function handles starting of
networks of different forward types (none, nat, route, open).
And as a part of startup process dnsmasq might be spawned but
doesn't have to be (depending on the network configuration). The
@dnsmasqStarted variable is supposed to track whether dnsmasq was
started or not (so that it can be killed when starting network
fails after it was started). But the variable is set even when
the code decided not to start it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of duplicating the list of attributes that are not
allowed for some of the IOMMU models, use two separate switch
statements: one for the attributes and one for the address.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The query-cpus-fast command was introduced in 2.12, therefore
query-cpus is never used on supported versions of QEMU. Remove
the logic to parse its output, as well as the parameters to
choose between the two commands.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently, it's possible to pass various attributes to an IOMMU's
<driver/> element hoping that we enable them in underlying
hypervisor. However, depending on the IOMMU model, some of these
attributes can't be enabled and are simply ignored. This is
suboptimal and we should reject such configuration in the
validate phase.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2101633
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
