When the <bandwidth> of an interface is changed with update-device,
the old settings are cleared with tc, then new settings added with
tc. But if the <bandwidth has been removed, the old settings weren't
being removed, so the bandwidth restrictions would still be active on
the interface although the interface status in libvirt showed that
they had been removed.
This patch fixes it by calling virNetDevBandwidthClear() if the
"modification" to the interface bandwidth was to completely clear
it.
An alternative could have been to modify virNetDevBandwidthSet() to
always clear existing bandwith settings at the beginning of the
function (currently it short circuits in that case, doing nothing),
but that would have led to cases where virNetDevBandwidthClear() was
now being called in cases where it previously wasn't, and while many
of those cases would be NOPs, there could be cases where it would
cause an error. The way this patch works, the ...Clear() function is
only called in cases where the ...Set() function had previously been
called successfully, so the risk of regression is minimized.
Resolves: https://bugzilla.redhat.com/1454709
Also call qemuDomainRemoveInputDevice if we receive the
event after the Detach API ends.
Commit 67486bb failed to include this.
https://bugzilla.redhat.com/show_bug.cgi?id=1524837
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
VM drivers may need to store additional private data to the status XML
so that it can be restored after libvirtd restart. Since not everything
is needed add a callback infrastructure, where VM drivers can add only
stuff they need.
Note that the private data is formatted as a <privateData> sub-element
of the <disk> or <backingStore> <source> sub-element. This is done since
storing it out of band (in the VM private data) would require a complex
matching process to allow to put the data into correct place.
https://bugzilla.redhat.com/show_bug.cgi?id=1523564
If the vhost-scsi device file cannot be found, the generic error
"error: An error occurred, but the cause is unknown"
is returned. Let's add a real error message to make it clear
why the failure occurred.
We cannot be sure someone initialized the passed *vhostfd and we
certainly don't want or need to be calling VIR_FORCE_CLOSE on what
probably is -1. So let's just return -1 immediately.
Commit id '70249927b' neglected to cover this case because the test
had taken the "shortcut" to already add the <address>; however, when
the PCI address assignment code was adjusted by commit id '70249927'
the vhost-scsi (VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST) wasn't
covered thus returning a 0 for pciFlags. So I altered the tests too
to make sure it doesn't happen again.
Previously the qemuxml2xmloutdata was a softlink to the source
qemuxml2argvdata, so I unlinked and recreated the output file to
force generation of the adddress. Without the test changes, an
address generation returns:
libvirt: Domain Config error : internal error: Cannot automatically
add a new PCI bus for a device with connect flags 00
if an address was supplied in the test, a restart of libvirtd or
edit of a guest would display the following opaque message:
warning : qemuDomainCollectPCIAddress:1237 :
qemuDomainDeviceCalculatePCIConnectFlags() thinks that the device
with PCI address 0000:00:09.0 should not have a PCI address
where the address is related to the guest PCI address provided.
virStringSplit may return NULL, so we must handle that.
Cc: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Remove the unnecessary clearing of address_array as VIR_ALLOC_N
initialized the array already.
Cc: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Commit id 'c5c96545' neglected to validate that the srcPriv was
non-NULL before dereferencing. Similar problem to what was fixed
by commit id '8056721c' but missed during multiple rebases and
code reworks.
Now that we have a private storage pool list, we can take the next
step and convert to using objects. In this case, we're going to use
RWLockable objects (just like every other driver) with two hash
tables for lookup by UUID or Name.
Along the way the ForEach and Search API's will be adjusted to use
the related Hash API's and the various FindBy functions altered and
augmented to allow for HashLookup w/ and w/o the pool lock already
taken.
After virStoragePoolObjRemove we will need to virObjectUnref(obj)
after to indicate the caller is "done" with it's reference. The
Unlock occurs during the Remove.
The NumOf, GetNames, and Export functions all have their own callback
functions to return the required data and the FindDuplicate code
can use the HashSearch function callbacks.
Commit id '5ab746b8' introduced the function as perhaps a copy
of storageVolLookupByPath; however, it did not use the @cleanpath
variable even though it used the virFileSanitizePath. So in essance
the only "check" being done for failure is whether it was possible
to strdup the path.
Looking at the virStoragePoolDefParseXML one will note that the
target.path is stored using the result of virFileSanitizePath.
Therefore, this function should sanitize and use the input @path
for the argument to storagePoolLookupByTargetPathCallback which
is comparing against stored target.path values.
Additionally, if there was an error we should use the proper error
of VIR_ERR_NO_STORAGE_POOL (instead of VIR_ERR_NO_STORAGE_VOL).
Replace the error message during startup of libvirtd with an info
message if audit_level < 2 and audit is not supported by the
kernel. Audit is not supported by the current kernel if the kernel
does not have audit compiled in or if audit is disabled (e.g. by the
kernel cmdline).
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
==25251== 5 bytes in 1 blocks are definitely lost in loss record 7 of 81
==25251== at 0x4C2BEDF: malloc (vg_replace_malloc.c:299)
==25251== by 0x967E379: strdup (in /lib64/libc-2.25.so)
==25251== by 0x5366F9F: virStrdup (virstring.c:941)
==25251== by 0x538BF1D: virDomainCapsNew (domain_capabilities.c:121)
==25251== by 0x10EACE: test_virDomainCapsFormat (domaincapstest.c:295)
==25251== by 0x10FBD2: virTestRun (testutils.c:180)
==25251== by 0x10F192: mymain (domaincapstest.c:457)
==25251== by 0x111C7F: virTestMain (testutils.c:1119)
==25251== by 0x10FA3C: main (domaincapstest.c:528)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
==32171== 32 bytes in 1 blocks are definitely lost in loss record 44 of 107
==32171== at 0x4C2DEF6: calloc (vg_replace_malloc.c:711)
==32171== by 0x55744A9: virAllocN (viralloc.c:191)
==32171== by 0x12CED2: xenMakeIPList (xen_common.c:1186)
==32171== by 0x12D0BE: xenFormatNet (xen_common.c:1221)
==32171== by 0x12F0D2: xenFormatVif (xen_common.c:1889)
==32171== by 0x12F2B4: xenFormatConfigCommon (xen_common.c:1944)
==32171== by 0x13BA32: xenFormatXL (xen_xl.c:1971)
==32171== by 0x1186CA: testCompareParseXML (xlconfigtest.c:105)
==32171== by 0x118A64: testCompareHelper (xlconfigtest.c:205)
==32171== by 0x119E36: virTestRun (testutils.c:180)
==32171== by 0x11970E: mymain (xlconfigtest.c:301)
==32171== by 0x11BEE3: virTestMain (testutils.c:1119)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
==30399== 180 (144 direct, 36 indirect) bytes in 3 blocks are definitely lost in loss record 91 of 111
==30399== at 0x4C2E0FF: realloc (vg_replace_malloc.c:785)
==30399== by 0x5574572: virReallocN (viralloc.c:245)
==30399== by 0x5574668: virExpandN (viralloc.c:294)
==30399== by 0x55747AB: virResizeN (viralloc.c:352)
==30399== by 0x560074D: virStringSplitCount (virstring.c:115)
==30399== by 0x137A59: xenParseXLVnuma (xen_xl.c:442)
==30399== by 0x13952B: xenParseXL (xen_xl.c:1064)
==30399== by 0x11884D: testCompareFormatXML (xlconfigtest.c:152)
==30399== by 0x118A87: testCompareHelper (xlconfigtest.c:207)
==30399== by 0x119E36: virTestRun (testutils.c:180)
==30399== by 0x119186: mymain (xlconfigtest.c:274)
==30399== by 0x11BEE3: virTestMain (testutils.c:1119)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
ncpus would be -1 on error and the cleanup for loop would not be skipped
in this case.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1522706
If domain is active, but the undefine API was called without the
VIR_DOMAIN_UNDEFINE_KEEP_NVRAM flag set, the following incorrect
error message is produced:
error: Requested operation is not valid: cannot delete inactive domain with nvram
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Move the IDE controller check from command line building to
controller def validation. Also explicitly include the avoidance
check for the implicit IDE controller from qemuBuildSkipController.
Cause the IDE case for command line building to generate a
failure if called to add an IDE since that shouldn't happen
if the Validate code did the right thing.
Move the call to qemuDomainCheckCCWS390AddressSupport from
qemuBuildControllerDevStr to qemuDomainDeviceDefValidateController.
This means we will get the qemuCaps from the driver opaque
variable passed to qemuDomainDeviceDefValidate.
Test conversion of multiple IP addresses to/from xl format and
domXML. Also test libxl_domain_config generator handling of
multiple IP addresses.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Xen's xl config format has long supported specifying multiple IP
addresses for virtual interfaces. E.g.
vif = [ "ip=10.0.0.1 10.1.1.1 2000::1, ..." ]
Add support for converting multiple IP addresses to/from domXML.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
vif-* scripts support it for a long time, and expect addresses to be
separated by spaces. Add appropriate support to libxl driver.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Migration never removes any configuration files on the destination host.
Thus when the domain is already defined on the destination, it will stay
persistent even after migration without --persist.
https://bugzilla.redhat.com/show_bug.cgi?id=1514930
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When reconnecting to a running domain started by old libvirt, which did
not change host-model into a custom CPU definition, we replace the CPU
definition with a specific CPU model from host capabilities. However,
that CPU model may not be supported by the running qemu process. We need
to translate the CPU model to one of the models which libvirt could have
used when starting the domain.
https://bugzilla.redhat.com/show_bug.cgi?id=1521202
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virQEMUCapsProbeQMPCPUDefinitions is now a small wrapper which fills in
qemuCaps with CPU models fetched by virQEMUCapsFetchCPUDefinitions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Since we are re-detecting the backing chain after pivoting to the active
block commit target (or block copy target) the disk index needs to be
reset to 0. This is necessary since we move a member of the backing
chain to disk->src but clear indexes only starting from
disk->src->backingStore. The freshly detected images have indexes
starting from 1, but since we've pivoted into an image which was
previously a backing store it would have a non-0 index.
The lookup function would then return the top of the chain for queries
like 'vda[1]' instead of the first backing store.
This problem will not be present once we keep the disk indexes stable.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1519745
Since commit 5e5019bf, we've no longer use
VIR_ERR_AGENT_UNSYNCED anymore.
Mark it as DEPRECATED.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virStorageFileReportBrokenChain uses data from the driver private data
pointer to print the user and group. This would lead to a crash in call
paths where we did not initialize the storage backend as recently added
in commit 24e47ee2b9 to qemuDomainDetermineDiskChain.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1522682
The Fedora mingw support is all merged in Fedora repos, so remove the
outdated link.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Change all links to https:// where the remote site supports it. Fix URLs for
a few packages that moved, and delete entries which appear to be dead.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently we only describe setting the CN field for server certs. This leads
to inevitable pain for users who set it to the fully qualified hostname and
then use a unqualified hostname or IP address to connect in the URI. Describe
the usage of Subject Alt Name extensions, to provide multiple hostnames and
IP addresses. This will help users avoid the classic mistake and is important
future proofing, since at least in browsers, TLS libraries no longer use the
CN field for validation, mandating use of SAN info instead.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Various example XML documents for arp/rarp filtering have a protocolid
XML attribute defined. This is never parsed or output by the libvirt XML
handling code, so shouldn't be present in example XML files either
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The contents of a <rule> are a choice of exactly one union member. The
RNG schema, however, was allowing an arbitrary number of instances of every
union member at once.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Adding an IDE controller for a machinetype that has no built-in IDE
controller, libvirt will log an error. Currently the machinetype list
which returns by qemuDomainMachineHasBuiltinIDE only includes 440fx,
malta, sun4u and g3beige.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Adding an IDE controller for a machinetype that has no built-in IDE
controller, libvirt will log an error. Currently the machinetype list
which returns by qemuDomainMachineHasBuiltinIDE only includes 440fx,
malta, sun4u and g3beige.
Remove the disk and the .args file since the expectation is the test
will fail in qemuxml2argvtest because floppy is not supported on pseries
and thus no disk is necessary and no .args file would be created to
compare against.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
