After this commit, all man pages are generated using the same two
steps:
1. Process a source $command.pod file with pod2man(1) to obtain
a valid man page in $command.$section.in
2. Process $command.$section.in with sed(1) to obtain the final
man page in $command.$section
The values are currently limited to LLONG_MAX which causes some
problems. QEMU conveniently changed their maximum to 1e15 (1 PB) which
is enough for some time and we need to adapt to that so that we don't
throw "Unknown error" messages. Strictly limiting these values actually
fixes some corner case values (off-by-one checks in QEMU probably).
Since values out of the new specified range do not overflow anything,
change the type of error as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1317531
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
$ echo -n 'log_level=1' > ~/.config/libvirt/libvirtd.conf
$ libvirtd --timeout=10
2014-10-10 10:30:56.394+0000: 6626: info : libvirt version: 1.1.3.6, package: 1.fc20 (Fedora Project, 2014-09-08-17:50:42, buildvm-05.phx2.fedoraproject.org)
2014-10-10 10:30:56.394+0000: 6626: error : main:1261 : Can't load config file: configuration file syntax error: /home/rjones/.config/libvirt/libvirtd.conf:1: expecting a value: /home/rjones/.config/libvirt/libvirtd.conf
Rather than try to fix this in the depths of the parser, just catch
the case when a config file doesn't end in a newline, and manually
append a newline to the content before parsing
https://bugzilla.redhat.com/show_bug.cgi?id=1151409
According to the dnsmasq manpage, the netmask for IPv4 address ranges
will be auto-deteremined from the interface dnsmasq is listening on,
but it can't do this for IPv6 for some reason - it instead assumes a
network prefix of 64 for all IPv6 address ranges. If this is
incorrect, dnsmasq will refuse to give out an address to clients,
instead logging this message:
dnsmasq-dhcp[2380]: no address range available for DHCPv6 request via virbr0
The solution is for libvirt to add ",$prefix" to all IPv6 dhcp-range
arguments when building the dnsmasq.conf file.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1033739
FreeBSD's sed(1) doesn't support using "\n" to insert a newline,
so the installed default.xml file ends up containing a literal
"n" between tags; to work around this problem, add a tr(1)
invocation as suggested by the sed FAQ[1].
[1] http://sed.sourceforge.net/sedfaq4.html (4.1 c)
The stream serial number is the serial number of the RPC call
that initiated a data transfer. And as such can never be
negative. Moreover, when looking up internal state for a stream,
the serial numbers are compared. But hey, the serial number in
message header is unsigned too!
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
According to the autoconf manual, using '$(LN_S) -f' is not
portable; remove the target explicitly beforehand to work around
this limitation.
Adjust some slightly awkward indentation while at it.
My commit 0d1579572 crashes on a URI without a scheme, like via
'virsh --connect frob'
Add a check on uri->server too while we are at it, and centralize
them all
The current rule fails if the target already exists:
cd /home/jenkins/build/libvirt/lib && \
ln -s libnss_libvirt.so.1 nss_libvirt.so.1
ln: nss_libvirt.so.1: File exists
Makefile:3357: recipe for target 'install-exec-hook' failed
However, all other rules concerned with installation are
idempotent and will happily overwrite an existing target,
so this one should as well.
We don't have input devices in SDK thus for define/dumpxml
operations to be consistent we need to:
1. on dumpxml: infer input devices from other parts of config.
It is already done in prlsdkLoadDomain.
2. on define: check that input devices are the same that
will be infer back on dumpxml operation.
The second part should be fixed.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Remove all the plumbing needed for the different qcow-create/kvm-img
non-raw file creation.
We can drop the error messages because CreateQemuImg will thrown an
error for us but with slightly less fidelity (unable to find qemu-img),
which I think is acceptable given the unlikeliness of that error in
practice.
This an ubuntu/debian packaging convention. At one point it may have
been an actually different binary, but at least as of ubuntu precise
(the oldest supported ubuntu distro, released april 2012) kvm-img is
just a symlink to qemu-img for back compat.
I think it's safe to drop support for it
qcow-create was a crippled qemu-img impl that shipped with xen. I
think supporting this was only relevant for really old distros
that didn't have a proper qemu package, like early RHEL5. I think
it's fair to drop support
VIR_ERR_NO_SUPPORT maps to the error string
this function is not supported by the connection driver
and is largely only used for when a driver doesn't have any
implementation for a public API. So its usage with invalid
net-update requests is a bit out of place. Instead use
VIR_ERR_OPERATION_UNSUPPORTED which maps to:
Operation not supported
And is what qemu's hotplug routines use in similar scenarios
QEMU introduced the query-gic-capabilities QMP command
with commit 4468d4e0f383: use the command, if available,
to probe available GIC capabilities.
The information obtained is stored in a virQEMUCaps
instance, and will be later used to fill in a
virDomainCaps instance.
The struct contains a single boolean field, 'supported':
the meaning of this field is too generic to be limited to
devices only, and in fact it's already being used for
other things like loaders and OSs.
Instead of trying to come up with a more generic name just
get rid of the struct altogether.
libvirt handles empty source as NULL, while vz sdk as
"" thus we need a bit of conversion.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Current implementation does not detect all incompatible configurations.
For example if we have in vzsdk bootorder "cdrom1, cdrom0" (that is
"hdb, hda" in case of ide cdroms) and cdroms do not have disk
images inserted. In this case boot order check code fails to
distiguish them at all as for both PrlVmDev_GetFriendlyName gives "".
Well the consequences are only missing warnings but as
we just have introduced all the necessary tools to face the problem -
let's fix it.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Actually using disk PrlVmDev_GetFriendlyName as id on
detaching volumes is not a problem. We can only detach
hard disks and these can not have empty friendly names.
But upcoming update device functionality for cdroms
can not use disk source as id at all as update operation
typically change this same source value. Thus we will need
to use cdrom bus and cdrom target name as cdrom id. So in attempt
to use same id scheme for all purpuses lets fix hard disk
detach function to use new id.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Our intention is to use disk bus and disk target name pair
as disk id instead of name returned by PrlVmDev_GetFriendlyName.
We already have the code that extracts this pair from vzsdk
data. Let's factor it out into a function.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
