Commit Graph

15 Commits

Author SHA1 Message Date
Matt Coleman
fdca940619 Fix a typo in compiling.html.in: that -> from
The original author intended to write "different than".
"Different" is commonly followed by "from", "than", and "to".
Globally, "from" is the most common.

Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-09-10 09:13:52 +02:00
Pavel Hrdina
942d377d25 meson: adjust our documentation to mention meson instead of autoconf
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
2020-08-03 09:27:09 +02:00
Daniel P. Berrangé
a4da0b2ac6 docs: fix compilation instructions to use separate build dir
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-07-17 17:34:30 +01:00
Daniel P. Berrangé
2621d48f00 gnulib: delete all gnulib integration
This deletes all trace of gnulib from libvirt. We still
have the keycodemapdb submodule to deal with. The simple
solution taken was to update it when running autogen.sh.

Previously gnulib could auto-trigger refresh when running
'make' too. We could figure out a solution for this, but
with the pending meson rewrite it isn't worth worrying
about, given how infrequently keycodemapdb changes.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-02-07 15:03:54 +00:00
Pavel Hrdina
f96395e78e build: mandate use of a build dir != src dir
Historically we've allowed builds in the main src dir, but meson does
not support this. Explicitly force separate build dir in autotools to
align with meson. We must re-enable dependency tracking which the RPM
%configure macro turns off. Without this, the build dir doesn't get
the source directory tree mirrored.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-08 17:07:35 +01:00
Michal Privoznik
cfdc0c771a Forget last daemon/ dir artefacts
The most important part is LIBVIRTD_PATH env var fix. It is used
in virFileFindResourceFull() from tests. The libvirtd no longer
lives under daemon/.

Then, libvirtd-fail test was still failing (as expected) but not
because of missing config file but because it was trying to
execute (nonexistent) top_builddir/daemon/libvirtd which
fulfilled expected outcome and thus test did not fail.

Thirdly, lcov was told to generate coverage for daemon/ dir too.

Fourthly, our compiling documentation was still suggesting to run
daemonn/libvirtd.

And finally, some comments in a systemtap file and a probes file
were still referring to daemon/libvirtd.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-07-27 15:44:38 +02:00
Daniel P. Berrange
b1c81567c7 docs: switch to using HTML5 doctype declaration
The HTML5 doctype is simply

  <!DOCTYPE html>

no DTD is present because HTML5 is no longer defined as an
extension of SGML.

XSL has no way to natively output a doctype without a public
or system identifier, so we have to use an <xsl:text> hack
instead.

See also

  https://dev.w3.org/html5/html-author/#doctype-declaration

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-08-02 17:00:11 +01:00
Daniel P. Berrange
4e42ff6b7e docs: switch to using 'id' attribute instead of 'name' for links
The 'name' attribute on <a...> elements is deprecated in favour
of the 'id' attribute which is allowed on any element. HTML5
drops 'name' support entirely.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-08-02 17:00:11 +01:00
Michal Privoznik
6a0043cdd8 compiling.html.in: Kill useless spaces in <pre/>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-11-14 11:03:34 +01:00
Andrea Bolognani
2c51fa6ec4 maint: Switch to xz compressed PAX release archives
This allows us to produce releases that are roughly a third in
size, have no limitation on path length, and are still readable
by all supported platforms.
2016-06-15 18:53:34 +02:00
Eric Blake
1e503ee534 build: honor autogen.sh --no-git
Based on a report by Chandrashekar Shastri, at
https://bugzilla.redhat.com/show_bug.cgi?id=979360

On systems where git cannot access the outside world, a developer
can instead arrange to get a copy of gnulib at the right commit
via side channels (such as NFS share drives), set GNULIB_SRCDIR,
then use ./autogen.sh --no-git.  In this setup, we will now
avoid direct use of git.  Of course, this means no automatic
gnulib updates when libvirt.git updates its submodule, but it
is expected that any developer in such a situation is already
prepared to deal with the fallout.

* .gnulib: Update to latest, for bootstrap.
* bootstrap: Synchronize from gnulib.
* autogen.sh (no_git): Avoid git when requested.
* cfg.mk (_update_required): Skip automatic rerun of bootstrap if
we can't use git.
* docs/compiling.html.in: Document this setup.
* docs/hacking.html.in: Mention this.
* HACKING: Regenerate.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-07-09 16:15:29 -06:00
Daniel P. Berrange
f2f9742d4d Fix multiple formatting problems in HTML docs
The rule generating the HTML docs passing the --html flag
to xsltproc. This makes it use the legacy HTML parser, which
either ignores or tries to fix all sorts of broken XML tags.
There's no reason why we should be writing broken XML in
the first place, so removing --html and adding the XHTML
doctype to all files forces us to create good XML.

This adds the XHTML doc type and fixes many, many XML tag
problems it exposes.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-03 15:56:15 +01:00
Richard W.M. Jones
5090c576e3 Add a ./run script for running programs from the local directory.
With this script you can run libvirt programs without needing to
install them first.  You just have to do for example:

  ./run ./tools/virsh [args ...]

If you are already in the tools/ subdirectory, then the following
command will also work:

  ../run ./virsh [...]

You can also run the C programs under valgrind like this:

  ./run valgrind [valgrind opts...] ./program

or under gdb:

  ./run gdb --args ./program

This also works with sudo (eg. if you need root access for libvirt):

  sudo ./run ./tools/virsh list --all

Derived from libguestfs and simplified.  The ./run script in
libguestfs is much more sophisticated:

https://github.com/libguestfs/libguestfs/blob/master/run.in
2012-09-18 10:59:16 +01:00
Daniel P. Berrange
4878a33125 Improve docs about compiling libvirt from GIT
Add a note about setting the LIBVIRT_DRIVER_DIR env variable,
explain --system and fix example to use --disable-werror
2012-05-25 13:55:12 +01:00
Justin Clift
2954eb7b35 docs: added compiling page and significantly expanded windows page
Also added an additional menu placement for the windows page, in
order to attract further potential testers.
2010-12-21 20:55:10 +11:00