Total time of a migration and total downtime transfered from a source to
a destination host do not count with the transfer time to the
destination host and with the time elapsed before guest CPUs are
resumed. Thus, source libvirtd remembers when migration started and when
guest CPUs were paused. Both timestamps are transferred to destination
libvirtd which uses them to compute total migration time and total
downtime. Obviously, this requires the time to be synchronized between
the two hosts. The reported times are useless otherwise but they would
be equally useless if we didn't do this recomputation so don't lose
anything by doing it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When migrating a transient domain or with VIR_MIGRATE_UNDEFINE_SOURCE
flag, the domain may disappear from source host. And so will migration
statistics associated with the domain. We need to transfer the
statistics at the end of a migration so that they can be queried at the
destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virDomainGetJobStats gains new VIR_DOMAIN_JOB_STATS_COMPLETED flag that
can be used to fetch statistics of a completed job rather than a
currently running job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Job statistics data were tracked in several structures and variables.
Let's make a new qemuDomainJobInfo structure which can be used as a
single source of statistics data as a preparation for storing data about
completed a job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The new blockcopy API wants to reuse only a subset of the disk
hotplug parser - namely, we only care about the embedded
virStorageSourcePtr inside a <disk> XML. Strange as it may
seem, it was easier to just parse an entire disk definition,
then throw away everything but the embedded source, than it
was to disentangle the source parsing code from the rest of
the overall disk parsing function. All that I needed was a
couple of tweaks and a new internal flag that determines
whether the normally-mandatory target element can be
gracefully skipped, since everything else was already optional.
* src/conf/domain_conf.h (virDomainDiskSourceParse): New
prototype.
* src/conf/domain_conf.c (VIR_DOMAIN_XML_INTERNAL_DISK_SOURCE):
New flag.
(virDomainDiskDefParseXML): Honor flag to make target optional.
(virDomainDiskSourceParse): New function.
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu now checks for invalid address type for a panic device, which is
currently implemented only to use ISA address type, thus rejecting
any other options, except for leaving XML attributes blank, in that case,
defaults are used (this behaviour remains the same from earlier verions).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138125
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When QEMU fails during incoming migration after we successfully started
it (i.e., during Perform or Finish phase), we report a rather unhelpful
message
Unable to read from monitor: Connection reset by peer
We already have a code that takes error messages from QEMU's error
output but we disable it once QEMU successfully starts. This patch
postpones this until the end of Finish phase during incoming migration
so that we can report a much better error message:
internal error: early end of file from monitor: possible problem:
Unknown savevm section or instance '0000:00:05.0/virtio-balloon' 0
load of migration failed
https://bugzilla.redhat.com/show_bug.cgi?id=1090093
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Return failure right away when the domain object can't be looked up
instead of jumping to cleanup. This allows to remove the condition
before unlocking the domain object.
The code would lookup the snapshot object before acquiring the job. This
could lead to a crash as one thread could delete the snapshot object,
while a second thread already had the reference.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Creating snapshots modifies the domain state. Currently we wouldn't
enter the job for certain operations although they would modify the
state. Refactor job handling so that everything is covered by an async
job.
For security type='none' libvirt according to the docs should not
generate seclabel be it for selinux or any model. So, skip the
reservation of labels when type is none.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Fairly straightforward - I got lucky that the generated functions
worked out of the box :)
* src/remote/remote_protocol.x (remote_domain_block_copy_args):
New struct.
(REMOTE_PROC_DOMAIN_BLOCK_COPY): New RPC.
* src/remote/remote_driver.c (remote_driver): Wire it up.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
The usual portability fixes; and this includes a fix that adds
a new syntax check for double semicolons (commit 28de556 fixed
some, but gnulib found a better check).
* .gnulib: Update to latest.
* src/xenconfig/xen_common.c (xenFormatConfigCommon): Fix offender.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since 9f781da69de02745acb719e78982df9aeccfcd7b
Resolve a libvirtd crash in virStoragePoolSourceFindDuplicate()
when there is an existing SCSI pool defined with adapter type as
'scsi_host' and defining a new SCSI pool with adapter type as
'fc_host' and parent attribute missing or vice versa.
For example, if there is an existing SCSI pool with adapter type
as 'scsi_host' defined using the following XML
<pool type='scsi'>
<name>TEST_SCSI_POOL</name>
<source>
<adapter type='scsi_host' name='scsi_host1'/>
</source>
<target>
<path>/dev/disk/by-path</path>
</target>
</pool>
When defining another SCSI pool with adapter type as 'fc_host' using the
following XML will crash libvirtd
<pool type='scsi'>
<name>TEST_SCSI_FC_POOL</name>
<source>
<adapter type='fc_host' wwnn='1234567890abcdef' wwpn='abcdef1234567890'/>
</source>
<target>
<path>/dev/disk/by-path</path>
</target>
</pool>
Same is true for the reverse case as well where there exists a SCSI pool
with adapter type as 'fc_host' and another SCSI pool is defined with
adapter type as 'scsi_host'.
This happens because for fc_host 'name' is optional attribute whereas for
scsi_host its mandatory. However the check in libvirt for finding duplicate
storage pools didn't take that into account while comparing
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
To date, anyone performing a block copy and pivot ends up with
the destination being treated as <disk type='file'>. While this
works for data access for a block device, it has at least one
noticeable shortcoming: virDomainGetBlockInfo() reports allocation
differently for block devices visited as files (the size of the
device) than for block devices visited as <disk type='block'>
(the maximum sector used, as reported by qemu); and this difference
is significant when trying to manage qcow2 format on block devices
that can be grown as needed.
Of course, the more powerful virDomainBlockCopy() API can already
express the ability to set the <disk> type. But a new API can't
be backported, while a new flag to an existing API can; and it is
also rather inconvenient to have to resort to the full power of
generating XML when just adding a flag to the older call will do
the trick. So this patch enhances blockcopy to let the user flag
when the resulting XML after the copy must list the device as
type='block'.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_REBASE_COPY_DEV):
New flag.
* src/libvirt.c (virDomainBlockRebase): Document it.
* tools/virsh-domain.c (opts_block_copy, blockJobImpl): Add
--blockdev option.
* tools/virsh.pod (blockcopy): Document it.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Allow new flag.
(qemuDomainBlockCopy): Remember the flag, and make sure it is only
used on actual block devices.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
While reviewing the new virDomainBlockCopy API, Peter Krempa
pointed out that our existing design of using MiB/s for block
job bandwidth is rather coarse, especially since qemu tracks
it in bytes/s; so virDomainBlockCopy only accepts bytes/s.
But once the new API is implemented for qemu, we will be in
the situation where it is possible to set a value that cannot
be accurately reflected back to the user, because the existing
virDomainGetBlockJobInfo defaults to the coarser units.
Fortunately, we have an escape hatch; and one that has already
served us well in the past: we can use the flags argument to
specify which scale to use (see virDomainBlockResize for prior
art). This patch fixes the query side of the API; made easier
by previous patches that split the query side out from the
modification code. Later patches will address the virsh
interface, as well retrofitting all other blockjob APIs to
also accept a flag for toggling bandwidth units.
* include/libvirt/libvirt.h.in (_virDomainBlockJobInfo)
(VIR_DOMAIN_BLOCK_COPY_BANDWIDTH): Document sizing issues.
(virDomainBlockJobInfoFlags): New enum.
* src/libvirt.c (virDomainGetBlockJobInfo): Document new flag.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJobInfo): Add parameter.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJobInfo): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJobInfo):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJobInfo)
(qemuMonitorJSONGetBlockJobInfoOne): Likewise. Don't scale here.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror): Update
callers.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
(qemuDomainGetBlockJobInfo): Likewise, and support new flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous patch hoisted some bounds checks to the callers;
but someone that is not aware of the hoisted check could now
try passing an integer between LLONG_MAX and ULLONG_MAX. As a
safety measure, add new json conversion modes that let libvirt
error out early instead of pass bad numbers to qemu, if the
caller ever makes a mistake due to later refactoring.
Convert the various blockjob QMP calls to use the new modes,
and switch some of them to be optional (QMP has always supported
an omitted "speed" the same as "speed":0, for everything except
block-job-set-speed).
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMakeCommandRaw):
Add 'j'/'y' and 'J'/'Y' to error out on negative input.
(qemuMonitorJSONDriveMirror, qemuMonitorJSONBlockCommit)
(qemuMonitorJSONBlockJob): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu treats blockjob bandwidth as a 64-bit number, in the units
of bytes/second. But we stupidly modeled block job bandwidth
after migration bandwidth, which in turn was an 'unsigned long'
and therefore subject to 32-bit vs. 64-bit interpretations, and
with a scale of MiB/s. Our code already has to convert between
the two scales, and report overflow as appropriate; although
this conversion currently lives in the monitor code. In fact,
our conversion code limited things to 63 bits, because we
checked against LLONG_MAX and reject what would be negative
bandwidth if treated as signed.
On the bright side, our use of MiB/s means that even with a
32-bit unsigned long, we still have no problem representing a
bandwidth of 2GiB/s, which is starting to be more feasible as
10-gigabit or even faster interfaces are used. And once you
get past the physical speeds of existing interfaces, any larger
bandwidth number behaves the same - effectively unlimited.
But on the low side, the granularity of 1MiB/s tuning is rather
coarse. So the new virDomainBlockJob API decided to go with
a direct 64-bit bytes/sec number instead of the scaled number
that prior blockjob APIs had used. But there is no point in
rounding this number to MiB/s just to scale it back to bytes/s
for handing to qemu.
In order to make future code sharing possible between the old
virDomainBlockRebase and the new virDomainBlockCopy, this patch
moves the scaling and overflow detection into the driver code.
Several of the block job calls that can set speed are fed
through a common interface, so it was easier to adjust all block
jobs at once, for consistency. This patch is just code motion;
there should be no user-visible change in behavior.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob)
(qemuMonitorBlockCommit, qemuMonitorDriveMirror): Change
parameter type and scale.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob)
(qemuMonitorBlockCommit, qemuMonitorDriveMirror): Move scaling
and overflow detection...
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl)
(qemuDomainBlockRebase, qemuDomainBlockCommit): ...here.
(qemuDomainBlockCopy): Use bytes/sec.
Signed-off-by: Eric Blake <eblake@redhat.com>
Another layer of overly-multiplexed code that deserves to be
split into obviously separate paths for query vs. modify.
This continues the cleanup started in commit cefe0ba.
In the process, make some tweaks to simplify the logic when
parsing the JSON reply. There should be no user-visible
semantic changes.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob): Drop parameter.
(qemuMonitorBlockJobInfo): New prototype.
(BLOCK_JOB_INFO): Drop enum.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJob)
(qemuMonitorJSONBlockJobInfo): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Split...
(qemuMonitorBlockJobInfo): ...into second function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Move
block info portions...
(qemuMonitorJSONGetBlockJobInfo): ...here, and rename...
(qemuMonitorJSONBlockJobInfo): ...and export.
(qemuMonitorJSONGetBlockJobInfoOne): Alter return semantics.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl, qemuDomainGetBlockJobInfo): Adjust
callers.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror)
(qemuMigrationCancelDriveMirror): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit fba6bc4 introduced support for the 'invtsc' feature,
which blocks migration. We should not include it in the
host-model CPU by default, because it's intended to be used
with migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1138221
https://bugzilla.redhat.com/show_bug.cgi?id=1027096#c8
There are two ways in which security model can make it way into
<seclabel/>. One is as the @model attribute, the second one is
via security_driver knob in qemu.conf. Then, while parsing
<seclabel/> several checks and fix ups of old, stale combinations
are performed. However, iff @model is specified. They are not
done in the latter case. So it's still possible to feed libvirt
with senseless combinations (if qemu.conf is adjusted correctly).
One example of a seclabel that needs some adjustment (in case
security_driver=none in qemu.conf) is:
<seclabel type='dynamic' relabel='yes'/>
The fixup code is copied from virSecurityLabelDefParseXML
(covering the former case) into virSecurityLabelDefsParseXML
(which handles the latter case).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The qemu implementation for virDomainGetBlockJobInfo() has a
minor bug: it grabs the qemu job with intent to QEMU_JOB_MODIFY,
which means it cannot be run in parallel with any other
domain-modifying command. Among others, virDomainBlockJobAbort()
is such a modifying command, and it defaults to being
synchronous, and can wait as long as several seconds to ensure
that the job has actually finished. Due to the job rules, this
means a user cannot obtain status about the job during that
timeframe, even though we know that some client management code
exists which is using a polling loop on status to see when a job
finishes.
This bug has been present ever since blockpull support was first
introduced (commit b976165, v0.9.4 in Jul 2011), all because we
stupidly tried to cram too much multiplexing through a single
helper routine, but was made worse in 97c59b9 (v1.2.7) when
BlockJobAbort was fixed to wait longer. It's time to disentangle
some of the mess in qemuDomainBlockJobImpl, and in the process
relax block job query to use QEMU_JOB_QUERY, since it can safely
be used in parallel with any long running modify command.
Technically, there is one case where getting block job info can
modify domain XML - we do snooping to see if a 2-phase job has
transitioned into the second phase, for an optimization in the
case of old qemu that lacked an event for the transition. I
claim this optimization is safe (the jobs are all about modifying
qemu state, not necessarily xml state); but if it proves to be
a problem, we could use the difference between the capabilities
QEMU_CAPS_BLOCKJOB_{ASYNC,SYNC} to determine whether we even
need snooping, and only request a modifying job in the case of
older qemu.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Move info
handling...
(qemuDomainGetBlockJobInfo): ...here, and relax job type.
(qemuDomainBlockJobAbort, qemuDomainBlockJobSetSpeed)
(qemuDomainBlockRebase, qemuDomainBlockPull): Adjust callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
The existing virDomainBlockRebase code rejected the combination of
_RELATIVE and _COPY flags, but only by accident. It makes sense
to add support for the combination someday, at least for the case
of _SHALLOW and not _REUSE_EXT; but to implement it, libvirt would
have to pre-create the file with a relative backing name, and I'm
not ready to code that in yet.
Meanwhile, the code to forward on to the block copy code is getting
longer, and reorganizing the function to have the block pull done
early makes it easier to add even more block copy prep code.
This patch should have no semantic difference other than the quality
of the error message on the unsupported flag combination. Pre-patch:
error: unsupported flags (0x10) in function qemuDomainBlockCopy
Post-patch:
error: argument unsupported: Relative backing during copy not supported yet
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Reorder code,
and improve error message of relative copy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Our style overwhelmingly uses hanging braces (the open brace
hangs at the end of the compound condition, rather than on
its own line), with the primary exception of the top level function
body. Fix the few remaining outliers, before adding a syntax
check in a later patch.
* src/interface/interface_backend_netcf.c (netcfStateReload)
(netcfInterfaceClose, netcf_to_vir_err): Correct use of { in
compound statement.
* src/conf/domain_conf.c (virDomainHostdevDefFormatSubsys)
(virDomainHostdevDefFormatCaps): Likewise.
* src/network/bridge_driver.c (networkAllocateActualDevice):
Likewise.
* src/util/virfile.c (virBuildPathInternal): Likewise.
* src/util/virnetdev.c (virNetDevGetVirtualFunctions): Likewise.
* src/util/virnetdevmacvlan.c
(virNetDevMacVLanVPortProfileCallback): Likewise.
* src/util/virtypedparam.c (virTypedParameterAssign): Likewise.
* src/util/virutil.c (virGetWin32DirectoryRoot)
(virFileWaitForDevices): Likewise.
* src/vbox/vbox_common.c (vboxDumpNetwork): Likewise.
* tests/seclabeltest.c (main): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
I'm about to add a syntax check that enforces our documented
HACKING style of always using matching {} on if-else statements.
This patch focuses on drivers that had several issues.
* src/lxc/lxc_fuse.c (lxcProcGetattr, lxcProcReadMeminfo): Correct
use of {}.
* src/lxc/lxc_driver.c (lxcDomainMergeBlkioDevice): Likewise.
* src/phyp/phyp_driver.c (phypConnectNumOfDomainsGeneric)
(phypUUIDTable_Init, openSSHSession, phypStoragePoolListVolumes)
(phypConnectListStoragePools, phypDomainSetVcpusFlags)
(phypStorageVolGetXMLDesc, phypStoragePoolGetXMLDesc)
(phypConnectListDefinedDomains): Likewise.
* src/vbox/vbox_common.c (vboxAttachSound, vboxDumpDisplay)
(vboxDomainRevertToSnapshot, vboxDomainSnapshotDelete): Likewise.
* src/vbox/vbox_tmpl.c (vboxStorageVolGetXMLDesc): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
We lacked of HOME environment variable,
set 'HOME=/' as default.
The kernel sets up $HOME for the init process.
Therefore any init can assume that $HOME is set.
libvirt currently violates that implicit rule.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
When FIPS mode is on, gnutls_dh_params_generate2 will fail if 1024 is
specified as the prime's number of bits, a bigger value works in both
cases.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Memory is allocated for 'mnt_src' by VIR_STRDUP in the loop. Next
loop it will be allocated again. So we need to free 'mnt_src'
before continue the loop.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Commit 0e1a1a8c introduced umask for virCommand, but the variables
used emit a warning on older compilers about shadowed global
declaration.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add umask to _virCommand, allow user to set umask to command.
Set umask(002) to qemu process to overwrite the default umask
of 022 set by many distros, so that unix sockets created for
virtio-serial has expected permissions.
Fix problem reported here:
https://sourceware.org/bugzilla/show_bug.cgi?id=13078#c11https://bugzilla.novell.com/show_bug.cgi?id=888166
To use virtio-serial device, unix socket created for chardev with
default umask(022) has insufficient permissions.
e.g.:
-device virtio-serial \
-chardev socket,path=/tmp/foo,server,nowait,id=foo \
-device virtserialport,chardev=foo,name=org.fedoraproject.port.0
srwxr-xr-x 1 qemu qemu 0 21. Jul 14:19 /tmp/somefile.sock
Other users in the same group (like real user, test engines, etc)
cannot write to this socket.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, there is one flag passed in during macvtap creation
(withTap) -- Let's convert this field to an unsigned int flag
field for future expansion.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The cleanup in commit cf976d9d used secdef->label to label the tap
FDs, but that is not possible since it's process-only label (svirt_t)
and not a object label (e.g. svirt_image_t). Starting a domain failed
with EPERM, but simply using secdef->imagelabel instead of
secdef->label fixes it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since 1b807f92, connecting with virsh to an already running session
libvirtd fails with:
$ virsh list --all
error: failed to connect to the hypervisor
error: no valid connection
error: Failed to connect socket to
'/run/user/1000/libvirt/libvirt-sock': Transport endpoint is already
connected
This is caused by a logic error in virNetSocketNewConnectUnix: even if
the connection to the daemon socket succeeded, we still try to spawn the
daemon and then connect to it.
This commit changes the logic to not try to spawn libvirtd if we
successfully connected to its socket.
Most of this commit is whitespace changes, use of -w is recommended to
look at it.
Currently, after calling commands to create a new volumes,
virStorageBackendZFSCreateVol calls virStorageBackendZFSFindVols that
calls virStorageBackendZFSParseVol.
virStorageBackendZFSParseVol checks if a volume already exists by
trying to get it using virStorageVolDefFindByName.
For a just created volume it returns NULL, so volume is reported as
new and appended to pool->volumes. This causes a volume to be listed
twice as storageVolCreateXML appends this new volume to the list as
well.
Fix that by passing a new volume definition to
virStorageBackendZFSParseVol so it could determine if it needs to add
this volume to the list.
In qemuDomainSnapshotCreateDiskActive() if we jumped to cleanup from a
failed actions = virJSONValueNewArray(), then 'cfg' would be NULL.
So just return -1, which in turn removes the need for cleanup:
Coverity complained about the following:
(3) Event ptr_arith:
Performing pointer arithmetic on "cur_fd" in expression "cur_fd++".
130 return virNetServerServiceNewFD(*cur_fd++,
The complaint is that pointer arithmetic taking place instead of the
expected auto increment of the variable... Adding some well placed
parentheses ensures our order of operation.
