If the learning thread is configured to learn on all ethernet frames
(which is hardcoded) then chances are high that there is a packet on
every iteration of inspecting frames loop. As result we will hang on
shutdown because we don't check threadsTerminate if there is packet.
Let's just check termination conditions on every iteration. Since
we'll check each iteration, the check after pcap_next essentially
is unnecessary since on failure we'd loop back to the top and timeout
and then fail.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1632833
When doing a SCSI passthrough we don't put format= onto the
command line. This causes qemu to probe the format automatically
which ends up in a warning in the domain log and possible qemu
disabling writes to the first block (according to the warning
message).
Based-on-work-of: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The @alloc object returned by virDomainResctrlVcpuMatch is not
properly referenced and un-referenced in virDomainCachetuneDefParse.
This patch fixes this problem.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit ed5aa85f37
qemu: don't use chardev FD passing for vhostuser backend
altered the legacy DO_TEST macro.
Run the test against capabilities of QEMU 2.5.0 (which did not
support QEMU_CAPS_CHARDEV_FD_PASS) as well as the latest version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Test CCID smartcard passthrough from a unix listen socket.
Use the capabilities of QEMU 2.5.0 which did not support
chardev FD passing and the latest one, which (at the time
of this commit) it does.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The URI parser used by libvirt does not populate uri->path if the
trailing slash is missing. The code virStorageSourceParseBackingURI
would then not populate src->path.
As only NBD network disks are allowed to have the 'name' field in the
XML defining the disk source omitted we'd generate an invalid XML which
we'd not parse again.
Fix it by populating src->path with an empty string if the uri is
lacking slash.
As pointed out above NBD is special in this case since we actually allow
it being NULL. The URI path is used as export name. Since an empty
export does not make sense the new approach clears the src->path if the
trailing slash is present but nothing else.
Add test cases now to cover all the various cases for NBD and non-NBD
uris as there was to time only 1 test abusing the quirk witout slash for
NBD and all other URIs contained the slash or in case of NBD also the
export name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The name is misleading. Change it to 'uristr' so that 'path' can be
reused in the proper context later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Commit 4f4c3b13 (v3.3) fixed an issue where performing cleanup of
libvirt objects could sometimes lose error messages, by adding code
to copy the libvirt error into last_error prior to cleanup paths.
However, it caused a regression: on other paths, some errors are now
printed twice, if libvirt still remembers in its thread-local
storage that an error was set even after virsh cleared last_error.
For example:
$ virsh -c test:///default snapshot-delete test blah
error: Domain snapshot not found: no domain snapshot with matching name 'blah'
error: Domain snapshot not found: no domain snapshot with matching name 'blah'
Fix things by telling libvirt to discard any thread-local errors at
the same time virsh prints an error message (whether or not the libvirt
error is the same as what is stored in last_error).
Update the virsh-undefine testsuite (partially reverting portions of
commit b620bdee, by removing -q, to more easily pinpoint which commands
are causing which messages), now that there is only one error message
instead of two.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the same source gets built twice ('build same source on different
hosts at different times') the resulting files may differ.
Fix this by sorting the hash keys before usage.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
The mock is built on Linux only. Therefore we should load it only
on Linux too. This fixes the FreeBSD build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are couple of things wrong with the current implementation.
The first one is that in the first loop the code tries to build a
list of fuse.glusterfs mount points. Well, since the strings are
allocated in a temporary buffer and are not duplicated this
results in wrong decision made later in the code.
The second problem is that the code does not take into account
subtree mounts. For instance, if there's a fuse.gluster mounted
at /some/path and another FS mounted at /some/path/subdir the
code would not recognize this subdir mount.
Reported-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
If the given path is already a mount point (e.g. a bind mount of
a file, or simply a direct mount point of a FS), then our code
fails to detect that because the first thing it does is cutting
off part after last slash '/'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Introduce some basic test cases for virFileIsSharedFS(). More
will be added later. In order to achieve desired result, mocks
for setmntent() and statfs() need to be invented because the
first thing that virFileIsSharedFS() does is calling the latter.
If it finds a FUSE mount it'll call the former.
The mock might look a bit complicated, but in fact it's quite
simple. The test sets LIBVIRT_MTAB env variable to hold the
absolute path to a file containing mount table. Then, statfs()
returns matching FS it finds, and setmntent() is there just to
replace /proc/mounts with the file the test wants to load.
Adding this test also exposed a bug we have - because we assume
the given path points to a file we cut off what we assume is a
file name to obtain directory path and only then we call
statfs(). This is buggy because the passed path could be already
a mount point.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Because of lacking virTestCounterReset() call, the old test cases
name was preserved.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
On s390x the struct member f_type of statsfs is hard coded to 'unsigned
int'. Change virFileIsSharedFixFUSE() to take a 'long long int' and use
a temporary to avoid pointer-casting.
This fixes the following error:
../../src/util/virfile.c:3578:38: error: cast increases required alignment of target type [-Werror=cast-align]
virFileIsSharedFixFUSE(path, (long *) &sb.f_type);
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
virFileReadValueUint does not log errors for non-existient files,
it merely returns -2.
Commit 12093f1 introduced this.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
-net name= will be deprecated in QEMU 3.1:
commit 101625a4d4ac7e96227a156bc5f6d21a9cc383cd
net: Deprecate the "name" parameter of -net
git describe: v3.0.0-791-g101625a4d4
Use the id option instead, supported since QEMU 1.2:
commit 6687b79d636cd60ed9adb1177d0d946b58fa7717
convert net_client_init() to OptsVisitor
git describe: v1.0-3564-g6687b79d63 contains: v1.2.0-rc0~142^2~8
Thankfully, libvirt only uses -net for non-PCI, non-virtio NICs
on ARM.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
We now explicitly handle media change elsewhere so we can drop the
switch statement. This will also make it more intuitive once CDROM
device hotplug might be supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Disk hotplug has slightly different semantics from media changing. Move
the media change code out and add proper initialization of the new
source object and proper cleanups if something fails.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The disk hotplug code also overloads media change which is not ideal.
This will allow splitting out of the media change code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The disk storage source needs to be prepared if we want to use -blockdev
or secrets for the new media image. It does not hurt to do the same for
the legacy hotplug code as well.
Unfortunately helpers like qemuDomainPrepareDiskSource take
virDomainDiskDef as an argument and it would be hard to fix them to take
an explicit source, so the function also temporarily replaces disk->src
for the new source in this function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Some functions require us to replace disk->src with the new source for
them to work properly. To avoid confusion all places which allow
explicit virStorageSource should get the appropriate definition.
The legacy code fortunately does not need anything from the old source
so that does not require modifications.
Blockdev does require the old definition so we'll pass it explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since the code is also used when changing media we need to allow
specifying explicit source for which we are going to prepare. With this
change callers don't have to replace disk->src with the new source
definition for generating these.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
qemu media changing code tried to assume old media's format for the new
one if that was not specified. Since the format will always be present
it does not make sense to keep the code around.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Old media changing code does not bother setting up the secrets for new
media or actually removing/adding of the corresponding objects.
Additionally it uses secrets setup for the old image to be removed as
the secret for the new image which is wrong.
Remove the support for secrets while changing media for the legacy
approach. The only reasonable way to fix it is when using blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
While the idea was good the implementation not so much as we need to
take into account the old disk data and the new source. The code will be
consolidated later in a different way.
This reverts commit 663b1d55de.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Preparing the storage source prior to assigning the alias will not work
as the names of the certain objects depend on the alias for the legacy
hotplug case as we generate the object names for the secrets based on
the alias.
This reverts commit 192fdaa614.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
For non-Linux platforms we have
virHostValidateCGroupControllers() stub which only reports an
error. But we are not marking the ignored arguments the way we
should.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This removes code duplication and simplifies cgroup detection.
As a drawback we will not have separate messages to enable cgroup
controller in kernel or to mount it. On the other side the rewrite
adds support for cgroup v2.
The kernel config support was wrong because it was parsing
'/proc/self/cgroup' instead of '/proc/cgroups/' file.
The mount suggestion is removed as well because it will not work
with cgroup v2.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We need to configure multiple env variables for each set of tests so
create helper functions to do that.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We need to create the cgroup v2 sysfs the same way as we do for
cgroup v1.
This introduces new VIR_CGROUP_MOCK_MODE env variable which will
configure which cgroup mode each test requires. There are three
different modes:
- legacy: only cgroup v1 is available and it's the default mode
- hybrid: both cgroup v1 and cgroup v2 are available and have some
controllers
- unified: only cgroup v2 is available
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Remove the trailing '/' from prefix. This change is required in order
to introduce tests for unified cgroups. They are usually mounted in
'/sys/fs/cgroup'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This enables to use both cgroup v1 and v2 at the same time together
with libvirt. It is supported by kernel and there is valid use-case,
not all controllers are implemented in cgroup v2 so there might be
configurations where administrator would enable these missing
controllers in cgroup v1.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
