This revealed that GuestDefaultEmulator was a bit buggy, capable
of returning an emulator that didn't match the passed domain type. Fix
up the test suite input to continue to pass.
https://bugzilla.redhat.com/show_bug.cgi?id=1209948
So we have this bug. The virConnectGetDomainCapabilities() API
performs a couple of checks before it produces any result. One of
the checks is if the architecture requested by user can be run by
the binary (again user provided). However, the check is pretty
dumb. It merely compares if the default binary architecture
matches the one provided by user. However, a qemu binary can run
multiple architectures. For instance: qemu-system-ppc64 can run:
ppc, ppcle, ppc64, ppc64le and ppcemb. The default is ppc64, so
if user requested something else, like ppc64le, the check would
have failed without obvious reason.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When a qemu domain is to be rebooted, from outside, at libvirt
level it looks like regular shutdown. To really restart the
domain, libvirt needs to issue reset command on the monitor once
SHUTDOWN event appeared. So, in order to differentiate bare
shutdown and reboot libvirt uses a variable within domain private
data. It's called fakeReboot. When the reboot API is called, the
variable is set, but when the shutdown API is called it must be
cleared out. But it was not for every possible case. So if user
called virDomainReboot(), and there was no ACPI daemon running
inside the guest (so guest didn't initiated shutdown sequence)
and then virDomainShutdown(mode=agent) was called bad thing
happened. We remembered the fakeReboot and instead of shutting
the domain down, we just rebooted it.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Among all the monitor APIs some where checking if mon is NULL and some
were not. Since it's possible to have mon equal to NULL in case a second
call is attempted once entered the monitor. This requires that every
single API checks for the monitor.
This patch adds a macro that helps checking the state of the monitor and
either refactors existing checking code to use the macro or adds it in
case it was missing.
Rather than erroring out make the best attempt to retrieve other data if
disks are inaccessible or missing. The failure will still be logged
though.
Since the bulk stats API is called on multiple domains an error like
this makes the API unusable. This regression was introduced by commit
596a137134
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1209394
Commit f6563bc3 introduced HMP impl of the function (so that a different
uglier function could be removed). Before the HMP code is called there's
a leftover check that the monitor is JSON which inhibits the code from
working.
Changing the prototype to not have "int *index" since we'll soon be
disallowing index as a name. Curiously the original commit (a4504ac)
for the function used 'int idx' in the function - so they didn't match.
Now they do.
It is there even with -nodefaults and -no-user-config, so count with
that so we can start sparc domains.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
1. 'last_good_net' indicates the index of last successfully configured
net. so def->nets[last_good_net] should also be clean up if error occurs.
2. if error occurs in 'virNetDevMacVLanVPortProfileRegisterCallback'
(second 'goto err_exit' in loop), we should also do
'virNetDevVPortProfileDisassociate' cleanup for the
'virNetDevVPortProfileAssociate'(first code block in loop). So we should
consider the net is successfully configured after first code block in
loop finishes.
Signed-off-by: Huanle Han <hanxueluo@gmail.com>
After set memory parameters for running domain, save the change to live
xml is needed otherwise it will disappear after restart libvirtd.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1211548
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Apparently for Xen-devel 'index' is a global and causes a build failure,
so just use the shortened 'idx' instead to avoid the conflict.
Signed-off-by: John Ferlan <jferlan@redhat.com>
QEMU does not abandon the mirror. The job carries on in the synchronised
phase and it might be either pivoted again or cancelled. The commit
hints that the described behavior was happening in a downstream version.
If the command returns false there are two possible options:
1) qemu did not reach the point where it would ask the block job to
pivot
2) pivotting failed in the actual qemu coroutine
If either of those would happen we return failure and reset the
condition that waits for the block job to complete. This makes the API
fail but in case where qemu would actually abandon the mirror the fact
is notified via the event and handled asynchronously.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1202704
qemuDomainBlockJobImpl become an unmaintainable mess over the years of
adding new stuff to it. This patch starts splitting up individual
functions from it until it can be killed entirely.
In bulk this will add lines of code rather than delete them but it will
be traded for maintainability.
My intention is to split qemuMonitorJSONBlockJob() into simpler separate
functions for every block job type. Since the error handling code is the
same for all block jobs, this patch extracts the code into a separate
function that will later be reused in more places.
With the new helper qemuMonitorJSONErrorIsClass we can save a few
function calls as we can extract the error object once.
Split out the function that checks the actual error class string into a
separate helper as it will be useful later and refactor
qemuMonitorJSONHasError to return bool type and remove few useless
checks.
Basically virJSONValueObjectHasKey are useless here since the next call
to virJSONValueObjectGet is checking the return value again (which can't
fail at that point). By removing the first check we save a function
call.
Previously we checked that the vcpu we are trying to set is in range of
the number of threads presented by qemu. The problem is that if the VM
is offline the count is 0. Since the condition subtracted 1 from the
count the number would overflow and the check would never trigger.
Change the condition for more sensible ones with specific error
messages.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1208434
This patch adds checks for empty bitmaps right after the calls of
virBitmapParse. These only include spots where set API's are called and
where domain's XML is parsed.
Also, it partially reverts commit 983f5a which added a check for
invalid nodeset "0,^0" into virBitmapParse function. This change broke
the logic, as an empty bitmap should not cause an error.
https://bugzilla.redhat.com/show_bug.cgi?id=1210545
On arm, we probe for virtio-*-pci devices, but use their
virtio-*-device variants.
Set the capabilities based on the -device variants as well,
to make them work with qemus with the PCI devices compiled out.
When pre-creating storage for domains, we need to find corresponding
disk in the XML on the destination (domain XML may differ there, e.g.
disk is accessible under different path). For better debugging, I'm
printing all info I received on a disk. But there was a typo when
printing the disk capacity: "%lluu" instead of "%llu".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The problem with the previous implementation is,
even when qemuMigrationUpdateJobStatus() detects a migration job
has completed, it will do a sleep for 50 ms (which is unnecessary
and only adds up to the VM pause time).
Signed-off-by: Xing Lin <xinglin@cs.utah.edu>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Future IOThread setting patches would copy the code anyway, so create
and generalize the adding of pindef for the vcpu and the pinning of the
thread into their own APIs.
We support VNC for containers to have the same
interface with VMs. At this moment it just renders
linux text console.
Of course we don't pass any physical devices and
don't emulate virtual devices. Our VNC server
renders text from terminal master and sends
input events from VNC client to terminal.
So add special video type VIR_DOMAIN_VIDEO_TYPE_PARALLELS
for these pseudo-devices.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Future IOThread setting patches would copy the code anyway, so create
and generalize a delete cgroup and pindef for the vcpu into its own API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Future IOThread setting patches would copy the code anyway, so create
and generalize the add the vcpu to a cgroup into its own API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Support for drive-reopen was never present in the upstream code so we
don't need to pause the VM when doing the block pivot. Kill all the
code related to this semi-upstream artifact.
131,088 bytes in 16 blocks are definitely lost in loss record 2,174 of 2,176
at 0x4C29BFD: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x4C2BACB: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x52A026F: virReallocN (viralloc.c:245)
by 0x52BFCB5: saferead_lim (virfile.c:1268)
by 0x52C00EF: virFileReadLimFD (virfile.c:1328)
by 0x52C019A: virFileReadAll (virfile.c:1351)
by 0x52A5D4F: virCgroupGetValueStr (vircgroup.c:763)
by 0x1DDA0DA3: qemuRestoreCgroupState (qemu_cgroup.c:805)
by 0x1DDA0DA3: qemuConnectCgroup (qemu_cgroup.c:857)
by 0x1DDB7BA1: qemuProcessReconnect (qemu_process.c:3694)
by 0x52FD171: virThreadHelper (virthread.c:206)
by 0x82B8DF4: start_thread (pthread_create.c:308)
by 0x85C31AC: clone (clone.S:113)
Signed-off-by: Luyao Huang <lhuang@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1198645
Once upon a time, there was a little domain. And the domain was pinned
onto a NUMA node and hasn't fully allocated its memory:
<memory unit='KiB'>2355200</memory>
<currentMemory unit='KiB'>1048576</currentMemory>
<numatune>
<memory mode='strict' nodeset='0'/>
</numatune>
Oh little me, said the domain, what will I do with so little memory.
If I only had a few megabytes more. But the old admin noticed the
whimpering, barely audible to untrained human ear. And good admin he
was, he gave the domain yet more memory. But the old NUMA topology
witch forbade to allocate more memory on the node zero. So he
decided to allocate it on a different node:
virsh # numatune little_domain --nodeset 0-1
virsh # setmem little_domain 2355200
The little domain was happy. For a while. Until bad, sharp teeth
shaped creature came. Every process in the system was afraid of him.
The OOM Killer they called him. Oh no, he's after the little domain.
There's no escape.
Do you kids know why? Because when the little domain was born, her
father, Libvirt, called numa_set_membind(). So even if the admin
allowed her to allocate memory from other nodes in the cgroups, the
membind() forbid it.
So what's the lesson? Libvirt should rely on cgroups, whenever
possible and use numa_set_membind() as the last ditch effort.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently we check qemuCaps before starting the block job. But qemuCaps
isn't available on a stopped domain, which means we get a misleading
error message in this case:
# virsh domstate example
shut off
# virsh blockjob example vda
error: unsupported configuration: block jobs not supported with this QEMU binary
Move the qemuCaps check into the block job so that we are guaranteed the
domain is running.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
qemuMigrationCookieAddNBD is usually called from within an async
MIGRATION_OUT or MIGRATION_IN job, so it needs to start a nested job.
(The one exception is during the Begin phase when change protection
isn't enabled, but qemuDomainObjEnterMonitorAsync will behave the same
as qemuDomainObjEnterMonitor in this case.)
This bug was encountered with a libvirt client that repeatedly queries
the disk mirroring block job info during a migration. If one of these
queries occurs just as the Perform migration cookie is baked, libvirt
crashes.
Relevant logs are as follows:
6701: warning : qemuDomainObjEnterMonitorInternal:1544 : This thread seems to be the async job owner; entering monitor without asking for a nested job is dangerous
[1] 6701: info : qemuMonitorSend:972 : QEMU_MONITOR_SEND_MSG: mon=0x7fefdc004700 msg={"execute":"query-block","id":"libvirt-629"}
[2] 6699: info : qemuMonitorIOWrite:503 : QEMU_MONITOR_IO_WRITE: mon=0x7fefdc004700 buf={"execute":"query-block","id":"libvirt-629"}
[3] 6704: info : qemuMonitorSend:972 : QEMU_MONITOR_SEND_MSG: mon=0x7fefdc004700 msg={"execute":"query-block-jobs","id":"libvirt-630"}
[4] 6699: info : qemuMonitorJSONIOProcessLine:203 : QEMU_MONITOR_RECV_REPLY: mon=0x7fefdc004700 reply={"return": [...], "id": "libvirt-629"}
6699: error : qemuMonitorJSONIOProcessLine:211 : internal error: Unexpected JSON reply '{"return": [...], "id": "libvirt-629"}'
At [1] qemuMonitorBlockStatsUpdateCapacity sends its request, then waits
on mon->notify. At [2] the request is written out to the monitor socket.
At [3] qemuMonitorBlockJobInfo sends its request, and also waits on
mon->notify. The reply from the first request is received at [4].
However, qemuMonitorJSONIOProcessLine is not expecting this reply since
the second request hadn't completed sending. The reply is dropped and an
error is returned.
qemuMonitorIO signals mon->notify twice during its error handling,
waking up both of the threads waiting on it. One of them clears mon->msg
as it exits qemuMonitorSend; the other crashes:
qemuMonitorSend (mon=0x7fefdc004700, msg=<value optimized out>) at qemu/qemu_monitor.c:975
975 while (!mon->msg->finished) {
(gdb) print mon->msg
$1 = (qemuMonitorMessagePtr) 0x0
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
