Commit Graph

756 Commits

Author SHA1 Message Date
Cole Robinson
d30d572650 qemu: Fix -chardev udp if parameters are omitted
The following XML:

    <serial type='udp'>
      <source mode='connect' service='9999'/>
    </serial>

is accepted by domain_conf.c but maps to the qemu command line:

-chardev udp,host=127.0.0.1,port=2222,localaddr=(null),localport=(null)

qemu can cope with everything omitting except the connection port, which
seems to also be the intent of domain_conf validation, so let's not
generate bogus command lines for that case.
The defaults are empty strings for addresses and 0 for the localport

Additionally, tweak the qemu cli parsing to handle omitted host
parameters
for -serial udp
2011-08-11 15:19:51 +08:00
Matthias Bolte
099d30a825 Fix detection of GnuTLS 1.x.y
Detection based on gnutls_session doesn't work because GnuTLS 2.x.y
comes with a compat.h that defines gnutls_session to gnutls_session_t.

Instead detect this based on LIBGNUTLS_VERSION_MAJOR. Move this from
configure/config.h to gnutls_1_0_compat.h and make sure that all users
include gnutls_1_0_compat.h properly.

Also fix header guard in gnutls_1_0_compat.h.
2011-08-03 19:22:29 +02:00
Laine Stump
513122ae93 network: don't forward DNS requests from isolated networks
This is in response to:

  https://bugzilla.redhat.com/show_bug.cgi?id=723862

which points out that a guest on an "isolated" network could
potentially exploit the DNS forwarding provided by dnsmasq to create a
communication channel to the outside.

This patch eliminates that possibility by adding the "--no-resolv"
argument to the dnsmasq commandline, which tells dnsmasq to not
forward on any requests that it can't resolve itself (by looking at
its own static hosts files and runtime list of dhcp clients), but to
instead return a failure for those requests.

This shouldn't cause any undesirable change from current
behavior, even in the case where a guest is currently configured with
multiple interfaces, one of them being connected to an isolated
network, and another to a network that does have connectivity to the
outside. If the isolated network's DNS server is queried for a name
it doesn't know, it will return "Refused" rather than "Unknown", which
indicates to the guest that it should query other servers, so it then
queries the connected DNS server, and gets the desired response.
2011-07-29 17:23:55 -04:00
Eric Blake
343ab98229 build: avoid non-portable shell in test setup
POSIX states that 'a=1; a=2 b=$a command' has unspecified results
for the value of $b visible within command.  In particular, on
BSD, this resulted in PATH not picking up the in-test ssh.

* tests/Makefile.am (lv_abs_top_builddir): New macro.
(path_add, TESTS_ENVIRONMENT): Use it to avoid referring to an
environment variable set previously within the same command line.
Reported by Matthias Bolte.
2011-07-29 11:47:18 -06:00
Matthias Bolte
f2ac5807b9 tests: Don't use bash if we don't have to
This tested failed on FreeBSD because it was using bash, that might
not be installed.
2011-07-29 17:17:21 +02:00
Matthias Bolte
b590866bdb freebsd: Fix build problem due to picking up the wrong libvirt.h
Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location.  But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.

Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first.  Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.

Signed-off-by: Eric Blake <eblake@redhat.com>
2011-07-29 07:35:54 -06:00
Matthias Bolte
c0e5994aef freebsd: Avoid /bin/true in commandtest
Rely on PATH and use just true, because on FreeBSD it's /usr/bin/true.
2011-07-29 12:12:58 +02:00
Matthias Bolte
cffba7ea3e tests: Unify style of test skipping code
Prefer 'return EXIT_AM_SKIP' over 'exit(EXIT_AM_SKIP)'.

Prefer 'int main(void)' over 'int main(int argc, char **argv)'.

Fix mymain signature in commandtest and nodeinfotest.
2011-07-29 12:12:58 +02:00
Eric Blake
ff81956ac6 maint: add missing copyright notices
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.

* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
2011-07-28 15:01:17 -06:00
Laine Stump
ef79fb5b5f conf: add <listen> subelement to domain <graphics> element
Once it's plugged in, the <listen> element will be an optional
replacement for the "listen" attribute that graphics elements already
have. If the <listen> element is type='address', it will have an
attribute called 'address' which will contain an IP address or dns
name that the guest's display server should listen on. If, however,
type='network', the <listen> element should have an attribute called
'network' that will be set to the name of a network configuration to
get the IP address from.

* docs/schemas/domain.rng: updated to allow the <listen> element

* docs/formatdomain.html.in: document the <listen> element and its
  attributes.

* src/conf/domain_conf.[hc]:

  1) The domain parser, formatter, and data structure are modified to
     support 0 or more <listen> subelements to each <graphics>
     element. The old style "legacy" listen attribute is also still
     accepted, and will be stored internally just as if it were a
     separate <listen> element. On output (i.e. format), the address
     attribute of the first <listen> element of type 'address' will be
     duplicated in the legacy "listen" attribute of the <graphic>
     element.

  2) The "listenAddr" attribute has been removed from the unions in
     virDomainGRaphicsDef for graphics types vnc, rdp, and spice.
     This attribute is now in the <listen> subelement (aka
     virDomainGraphicsListenDef)

  3) Helper functions were written to provide simple access
     (both Get and Set) to the listen elements and their attributes.

* src/libvirt_private.syms: export the listen helper functions

* src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c,
  src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c,
  src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c

  Modify all these files to use the listen helper functions rather
  than directly referencing the (now missing) listenAddr
  attribute. There can be multiple <listen> elements to a single
  <graphics>, but the drivers all currently only support one, so all
  replacements of direct access with a helper function indicate index
  "0".

* tests/* - only 3 of these are new files added explicitly to test the
  new <listen> element. All the others have been modified to reflect
  the fact that any legacy "listen" attributes passed in to the domain
  parse will be saved in a <listen> element (i.e. one of the
  virDomainGraphicsListenDefs), and during the domain format function,
  both the <listen> element as well as the legacy attributes will be
  output.
2011-07-28 13:46:39 -04:00
Daniel P. Berrange
4d349ef7be Fix build with gnutls 1.0.x branch 2011-07-26 14:51:03 +01:00
Laine Stump
d6354c1696 util: change virFile*Pid functions to return < 0 on failure
Although most functions in libvirt return 0 on success and < 0 on
failure, there are a few functions lingering around that return errno
(a positive value) on failure, and sometimes code calling those
functions incorrectly assumes the <0 standard. I noticed one of these
the other day when auditing networkStartDhcpDaemon after Guido Gunther
found a place where success was improperly returned on failure (that
patch has been acked and is pending a push). The problem was that it
expected the return value from virFileReadPid to be < 0 on failure,
but it was actually positive (it was also neglected to set the return
code in this case, similar to the bug found by Guido).

This all led to the fact that *all* of the virFile*Pid functions in
util.c are returning errno on failure. This patch remedies that
problem by changing them all to return -errno on failure, and makes
any necessary changes to callers of the functions. (In the meantime, I
also properly set the return code on failure of virFileReadPid in
networkStartDhcpDaemon).
2011-07-25 16:56:26 -04:00
Daniel P. Berrange
677258ab02 Fix import of private key with older gnutls
With older GNUTLS the gnutls_x509_privkey_import function is
unable to import our private key. Instead we must use the
alternative gnutls_x509_privkey_import_pkcs8() (as certtool
does).

* virnettlscontexttest.c: Fix import of private key with
  older gnutls. Also add missing newlines to key
2011-07-25 13:47:11 -06:00
Daniel P. Berrange
567b8d69b9 Fix TLS context tests with expired certs
commit 5283ea9b1d changed the
semantics of the 'expire_offset' field in the test case struct
so that instead of being an absolute timestamp, it was a delta
relative to the current time. This broke the test cases which
were testing expiry of certificates, by putting the expiry
time into the future, instead of in the past.

Fix this by changing the expiry values to be negative, so that
the delta goes into the past again.

* virnettlscontexttest.c: Fix expiry tests
2011-07-25 16:21:19 +01:00
Eric Blake
d1f144d6fe tests: detect gnutls errors
* tests/virnettlscontexttest.c (testTLSLoadKey): Report errors.
2011-07-25 13:51:50 +08:00
Michal Privoznik
2b9efcb3df bandwidth: Add domain schema and xml2xml tests 2011-07-25 13:50:20 +08:00
Michal Privoznik
e5f1f9de77 bandwidth: Add test cases for network 2011-07-25 13:50:06 +08:00
Eric Blake
5283ea9b1d tests: fix compilation failures
Even though gnutls is a hard-req for libvirt, and gnutls depends
on libtasn1, that does not mean that you have to have the libtasn1
development files installed.  Skip the test rather than failing
compilation in that case.

With newer gcc, the test consumed too much stack space.  Move
things to static storage to fix that.

* configure.ac (AC_CHECK_HEADERS): Check for libtasn1.h.
(HAVE_LIBTASN1): New automake conditional.
* tests/Makefile.am (virnettlsconvirnettlscontexttest_SOURCES)
(virnettlscontexttest_LDADD): Allow compilation without libtasn1.
* tests/virnettlscontexttest.c: Skip test if headers not present.
(struct testTLSCertReq): Alter time members.
(testTLSGenerateCert): Reflect the change.
(mymain): Reduce stack usage.
2011-07-25 13:48:26 +08:00
Daniel P. Berrange
bd789dff80 Add a test case for certificate validation
This test case checks certification validation rules for

 - Basic constraints
 - Key purpose
 - Key usage
 - Start/expiry times

It checks initial context creation sanity checks, and live
session validation
2011-07-22 15:18:32 +01:00
Oskari Saarenmaa
6b01c83a63 remote/ssh: optional "keyfile" parameter.
New optional parameter "keyfile" for ssh transport allows the user to select
the private key to be used to authenticate to the remote host.
2011-07-22 07:49:49 -06:00
Laine Stump
04711a0f32 network: internal API functions to manage assignment of physdev to guest
The network driver needs to assign physical devices for use by modes
that use macvtap, keeping track of which physical devices are in use
(and how many instances, when the devices can be shared). Three calls
are added:

networkAllocateActualDevice - finds a physical device for use by the
domain, and sets up the virDomainActualNetDef accordingly.

networkNotifyActualDevice - assumes that the domain was already
running, but libvirtd was restarted, and needs to be notified by each
already-running domain about what interfaces they are using.

networkReleaseActualDevice - decrements the usage count of the
allocated physical device, and frees the virDomainActualNetDef to
avoid later accidentally using the device.

bridge_driver.[hc] - the new APIs. When WITH_NETWORK is false, these
functions are all #defined to be "0" in the .h file (effectively
becoming a NOP) to prevent link errors.

qemu_(command|driver|hotplug|process).c - add calls to the above APIs
    in the appropriate places.

tests/Makefile.am - we need to include libvirt_driver_network.la
    whenever libvirt_driver_qemu.la is linked, to avoid unreferenced
    symbols (in functions that are never called by the test
    programs...)
2011-07-21 14:47:19 -04:00
Laine Stump
40fd7073be conf: support abstracted interface info in network XML
The network XML is updated in the following ways:

1) The <forward> element can now contain a list of forward interfaces:

     <forward .... >
       <interface dev='eth10'/>
       <interface dev='eth11'/>
       <interface dev='eth12'/>
       <interface dev='eth13'/>
     </forward>

   The first of these takes the place of the dev attribute that is
   normally in <forward> - when defining a network you can specify
   either one, and on output both will be present. If you specify
   both on input, they must match.

2) In addition to forward modes of 'nat' and 'route', these new modes
   are supported:

     private, passthrough, vepa - when this network is referenced by a
     domain's interface, it will have the same effect as if the
     interface had been defined as type='direct', e.g.:

        <interface type='direct'>
          <source mode='${mode}' dev='${dev}>
          ...
        </interface>

     where ${mode} is one of the three new modes, and ${dev} is an interface
     selected from the list given in <forward>.

     bridge - if a <forward> dev (or multiple devs) is defined, and
     forward mode is 'bridge' this is just like the modes 'private',
     'passthrough', and 'vepa' above. If there is no forward dev
     specified but a bridge name is given (e.g. "<bridge
     name='br0'/>"), then guest interfaces using this network will use
     libvirt's "host bridge" mode, equivalent to this:

       <interface type='bridge'>
          <source bridge='${bridge-name}'/>
          ...
       </interface>

3) A network can have multiple <portgroup> elements, which may be
   selected by the guest interface definition (by adding
   "portgroup='${name}'" in the <source> element along with the
   network name). Currently a portgroup can only contain a
   virtportprofile, but the intent is that other configuration items
   may be put there int the future (e.g. bandwidth config). When
   building a guest's interface, if the <interface> XML itself has no
   virtportprofile, and if the requested network has a portgroup with
   a name matching the name given in the <interface> (or if one of the
   network's portgroups is marked with the "default='yes'" attribute),
   the virtportprofile from that portgroup will be used by the
   interface.

4) A network can have a virtportprofile defined at the top level,
   which will be used by a guest interface when connecting in one of
   the 'direct' modes if the guest interface XML itself hasn't
   specified any virtportprofile, and if there are also no matching
   portgroups on the network.
2011-07-21 14:46:53 -04:00
Laine Stump
07f4136993 conf: support abstracted interface info in domain interface XML
the domain XML <interface> element is updated in the following ways:

1) <virtualportprofile> can be specified when source type='network'
(previously it was only valid for source type='direct')

2) A new attribute "portgroup" has been added to the <source>
element. When source type='network' (the only time portgroup is
recognized), extra configuration information will be taken from the
<portgroup> element of the given name in the network definition.

3) Each virDomainNetDef now also potentially has a
virDomainActualNetDef which is a private object (never
exported/imported via the public API, and not defined in the RNG) that
is used to maintain information about the physical device that was
actually used for a NetDef of type VIR_DOMAIN_NET_TYPE_NETWORK.

The virDomainActualNetDef will only be parsed/formatted if the
parse/format function is called with the
VIR_DOMAIN_XML_INTERNAL_ACTUAL_NET flag set (which is only needed when
saving/loading a running domain's state info to the stateDir).
2011-07-21 14:46:44 -04:00
Eric Blake
8e22e08935 build: rename files.h to virfile.h
In preparation for a future patch adding new virFile APIs.

* src/util/files.h, src/util/files.c: Move...
* src/util/virfile.h, src/util/virfile.c: ...here, and rename
functions to virFile prefix.  Macro names are intentionally
left alone.
* *.c: All '#include "files.h"' uses changed.
* src/Makefile.am (UTIL_SOURCES): Reflect rename.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_close): Likewise.
* src/libvirt_private.syms: Likewise.
* docs/hacking.html.in: Likewise.
* HACKING: Regenerate.
2011-07-21 10:34:51 -06:00
Wen Congyang
c4441fee10 qemu: Implement period and quota tunable XML configuration and parsing
This patch implements period and quota tunable XML configuration and parsing.
A quota or period of zero will be simply ignored.
2011-07-21 17:11:12 +08:00
Osier Yang
fff9d71a65 tests: Fix virshtest failure after dominfo changed
Caused by the new changed "dominfo" command.
2011-07-19 20:48:15 +08:00
Jiri Denemark
f580a33ffd virsh: fix previous patch
The last patch breaks make check for two reasons. First, it reverses the
condition but leaves default level unchanged, so instead of not printing
anything but errors before the patch it now prints all debug messages by
default. Second, you forgot to change -d5 option passed to virsh in
tests/virsh-optparse to -d0; the script wants to see all debug messages.
2011-07-14 07:14:05 -06:00
Daniel P. Berrange
ebbae359ff Change extract pidfile & monitor config from QEMU command line
When converting QEMU argv into a virDomainDefPtr, also extract
the pidfile, monitor character device config and the monitor
mode.

* src/qemu/qemu_command.c, src/qemu/qemu_command.h: Extract
  pidfile & monitor config from QEMU argv
* src/qemu/qemu_driver.c, tests/qemuargv2xmltest.c: Add extra
  params when calling qemuParseCommandLineString
2011-07-12 15:39:04 +01:00
Oskari Saarenmaa
9a0e6a8fae remote/ssh: support for no_verify.
Set StrictHostKeyChecking=no to auto-accept new ssh host keys if the
no_verify extra parameter was specified.  This won't disable host key
checking for already known hosts.  Includes a test and documentation.
2011-07-12 15:09:05 +02:00
Matthias Bolte
aa14709a47 Add domain type checking
The drivers were accepting domain configs without checking if those
were actually meant for them. For example the LXC driver happily
accepts configs with type QEMU.

Add a check for the expected domain types to the virDomainDefParse*
functions.
2011-07-11 19:38:51 +02:00
Eric Blake
9693e29395 tests: simplify formatting
The shell version would output 40 extra spaces for a test with
a multiple of 40 sub-tests, and the C version can use the same
printf optimization for avoiding a loop over single space output
as the shell version.

* tests/testutils.c (virtTestMain): Avoid loop for alignment.
* tests/test-lib.sh: Fix formatting when counter is multiple of 40.
2011-07-11 09:21:37 -06:00
Jim Fehlig
eb3143154e Do not drop kernel cmdline for xen pv domains
Kernel cmdline args can be passed to xen pv domains even when a
bootloader is specified.  The current config-to-sxpr mapping
ignores cmdline when bootloader is present.

Since the xend sub-driver is used with many xen toolstack versions,
this patch takes conservative approach of adding an else block to
existing !def->os.bootloader, and only appends sxpr if def->os.cmdline
is non-NULL.

V2: Fix existing testcase broken by this patch and add new testcases
2011-07-11 09:11:15 -06:00
Michal Privoznik
874e65aa15 bios: Add support for SGA
This patch creates new <bios> element which, at this time has only the
attribute useserial='yes|no'. This attribute allow users to use
Serial Graphics Adapter and see BIOS messages from the very first moment
domain boots up. Therefore, users can choose boot medium, set PXE, etc.
2011-07-11 11:47:14 +02:00
Matthias Bolte
c3ab6b2b53 tests: Improve output of tests that decide to skip at runtime
Don't print OK/FAIL for tests that decide to be skipped after
calling virtTestMain. Delay printing of the indentation before
the first test until we know that the test didn't decide to be
skipped.

Also make the reconnect test use VIRT_TEST_MAIN.
2011-07-09 15:47:57 +02:00
Matthias Bolte
b1c9bf27cb tests: Fix compressed test output padding logic
The current logic tries to count from 1 to 40 and ignores paddings
of 0 and 1 to 40. This doesn't work for counter + 1 mod 40 == 0
like here for counter value 159

TEST: virsh-all
      ........................................ 40
      ........................................ 80
      ........................................ 120
      ....................................... 159 OK
PASS: virsh-all

Also seq isn't portable. Therefore, calculate the correct padding
length directly and use printf to output it at once.
2011-07-09 15:40:23 +02:00
Matthias Bolte
4540f8d227 tests: Use EXIT_AM_SKIP instead of 77 directly 2011-07-09 10:14:38 +02:00
Michal Privoznik
30c43afd73 graphics: add support for action_if_connected in qemu
This option accepts 3 values:
-keep, to keep current client connected (Spice+VNC)
-disconnect, to disconnect client (Spice)
-fail, to fail setting password if there is a client connected (Spice)
2011-07-08 17:00:43 +02:00
John Williams
a1092070d4 microblaze: Add architecture support
Add libvirt support for MicroBlaze architecture as a QEMU target.  Based on mips/mipsel pattern.

Signed-off-by: John Williams <john.williams@petalogix.com>
2011-07-07 17:49:21 -06:00
Jim Fehlig
41828514bb Skip some xen tests if xend is not running
Currently, the xen statstest and reconnect tests are only compiled
if xend is running.  Compile them unconditionally if xen headers
are present, but skip the tests at runtime if xend is not running.

This is in response to Eric's suggestion here

https://www.redhat.com/archives/libvir-list/2011-July/msg00367.html
2011-07-07 17:23:09 -06:00
Jim Fehlig
a34e193fb7 Fix compilation of statstest.c during make check 2011-07-07 10:15:05 -06:00
Matthias Bolte
3ab1776b7f tests: Disable networkxml2argvtest when configured without network
Reported by Ruben Kerkhof.
2011-07-05 15:26:18 +02:00
Eric Blake
5d382c57a1 build: avoid 'make syntax-check' failure
* tests/utiltest.c (DO_TEST): Fix indentation for cppi.
2011-07-01 16:46:20 -06:00
Matthias Bolte
ab0b2c1996 tests: Add a general util test
Move non-esx specific tests from esxutilstest there and add a
test for virParseVersionString.
2011-07-01 19:58:15 +02:00
Eric Blake
6ae3052c06 build: consistently use CFLAGS
According to the automake manual, CPPFLAGS (aka INCLUDES, as spelled
in automake 1.9.6) should only include -I, -D, and -U directives; more
generic directives like -Wall belong in CFLAGS since they affect more
phases of the build process.  Therefore, we should be sticking CFLAGS
additions into a CFLAGS container, not a CPPFLAGS container.

* src/Makefile.am (libvirt_driver_vmware_la_CFLAGS): Use AM_CFLAGS.
(INCLUDES): Move CFLAGS items...
(AM_CFLAGS): ...to their proper location.
* python/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
* tests/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
(commandtest_CFLAGS, commandhelper_CFLAGS)
(virnetmessagetest_CFLAGS, virnetsockettest_CFLAGS): Use AM_CFLAGS.
2011-07-01 10:44:17 -06:00
Daniel P. Berrange
20ce065124 Remove bogus jsondata.h file reference which does not exist
* tests/Makefile.am: Remove jsondata.h
2011-07-01 10:16:33 +01:00
Daniel P. Berrange
06da1805bf Add test case for parsing JSON docs
While investigating some memory leaks it was unclear whether the
JSON code correctly free'd all memory during parsing. Add a test
case which can be run under valgrind to clearly demonstrate that
the parser is leak free.

* tests/Makefile.am: Add 'jsontest'
* tests/jsontest.c: A few simple JSON parsing tests
2011-06-30 18:04:02 +01:00
Osier Yang
e5b9f355b0 tests: Add valgrind.supp into EXTRA_DIST 2011-06-30 23:23:23 +08:00
Osier Yang
a2753079da tests: Fix memory leak in virnetmessagetest
Detected when playing with "make -C tests valgrind".
2011-06-29 10:47:54 +08:00
Matthias Bolte
9523b3c320 network: Fix dnsmasq hostsfile creation logic and related tests
networkSaveDnsmasqHostsfile was added in 8fa9c22142 (Apr 2010).
It has a force flag. If the dnsmasq hostsfile already exists force
needs to be true to overwrite it. networkBuildDnsmasqArgv sets force
to false, networkDefine sets it to true. This results in the
hostsfile being written only in networkDefine in the common case.
If no error occurred networkSaveDnsmasqHostsfile returns true and
networkBuildDnsmasqArgv adds the --dhcp-hostsfile to the dnsmasq
command line.

networkSaveDnsmasqHostsfile was changed in 89ae9849f7 (24 Jun 2011)
to return a new dnsmasqContext instead of reusing one. This change broke
the logic of the force flag as now networkSaveDnsmasqHostsfile returns
NULL on error, but the early return -- if force was not set and the
hostsfile exists -- returns 0. This turned the early return in an error
case and networkBuildDnsmasqArgv didn't add the --dhcp-hostsfile option
anymore if the hostsfile already exists. It did because networkDefine
created the hostsfile already.

Then 9d4e2845d4 fixed the return 0 case in networkSaveDnsmasqHostsfile
but didn't apply the force option correctly to the new addnhosts file.
Now force doesn't control an early return anymore, but influences the
handling of the hostsfile context creation and dnsmasqSave is always
called now. This commit also added test cases that reveal several
problems. First, the tests now calls functions that try to write the
dnsmasq config files to disk. If someone runs this tests as root this
might overwrite actively used dnsmasq config files, this is a no-go. Also
the tests depend on configure --localstatedir, this needs to be fixed as
well, because it makes the tests fail when localstatedir is different
from /var.

This patch does several things to fix this:

1) Move dnsmasqContext creation and saving out of networkBuildDnsmasqArgv
to the caller to separate the command line generation from the config
file writing. This makes the command line generation testable without the
risk of interfering with system files, because the tests just don't call
dnsmasqSave.

2) This refactoring of networkSaveDnsmasqHostsfile makes the force flag
useless as the saving happens somewhere else now. This fixes the wrong
usage of the force flag in combination with then newly added addnhosts
file by removing the force flag.

3) Adapt the wrong test cases to the correct behavior, by adding the
missing --dhcp-hostsfile option. Both affected tests contain DHCP host
elements but missed the necessary --dhcp-hostsfile option.

4) Rename networkSaveDnsmasqHostsfile to networkBuildDnsmasqHostsfile,
because it doesn't save the dnsmasqContext anymore.

5) Move all directory creations in dnsmasq context handling code from
the *New functions to dnsmasqSave to avoid directory creations in system
paths in the test cases.

6) Now that networkBuildDnsmasqArgv doesn't create the dnsmasqContext
anymore the test case can create one with the localstatedir that is
expected by the tests instead of the configure --localstatedir given one.
2011-06-29 01:59:34 +02:00
Laine Stump
25171f607c network: add domain to unqualified names defined with <host>
If a domain name is defined for a network, add the --expand-hosts
option to the dnsmasq commandline. This results in the domain being
added to any hostname that is defined in a dns <host> element and
contains no '.' characters (i.e. it is an "unqualified"
hostname). Since PTR records are automatically created for any name
defined in <host>, the result of a PTR request will change from the
unqualified name to the qualified name.

This also has the same effect on any hostnames that dnsmasq reads
from the host's /etc/hosts file.

(In the case of guest hostnames that were learned by dnsmasq via DHCP
requests, they were already getting the domain name added on, even
without --expand-hosts).
2011-06-28 12:57:14 -04:00