Block job QMP commands with underscores rather than dashes were never
released in upstream qemu, (they were added, but modified in the same
release [1]), but a certain distro managed to backport the version in the
middle.
The change also slightly modified semantics for the abort command, which
made us have a lot of code which was only ever present in certain
downstream distros.
Clean the upstream code from the legacy cruft and support only the
upstream implementations.
[1] See qemu commit v1.0-2176-gdb58f9c060
Reviewed-by: Eric Blake <eblake@redhat.com>
No need to pass a @driver parameter since all that's done is deref
the @cfg especially since the only caller can just pass an already
referenced @cfg.
Also, looks like commit id '0298531b' at one time had a different
name for the API, so I took the liberty of fixing the comments too
since I would already be updating them for the @cfg variable.
The VIR_SECURITY_MANAGER_MOUNT_NAMESPACE flag informs the DAC driver
if mount namespaces are in use for the VM. Will be used for future
changes.
Wire it up in the qemu driver
Commit 703abf1d7 changed the logic so that we don't attempt to re-create
the image if it's a block device. This was done by modifying the
'reuse' variable. Unfortunately after modifying it one of the uses was
to infer whether we should probe the disk format. After changes in the
commit mentioned above we would attempt the probe if the target of the
copy is a block device and the format was not provided explicitly rather
than using the format of the disk.
Fix it by explicitly checking whether the user requested a reuse of the
disk rather than the modified boolean flag.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1490826
https://bugzilla.redhat.com/show_bug.cgi?id=1447169
With this patch users can cold plug a watchdog. Things are pretty
simple because a domain can have at most one watchdog device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If there was an error when constructing the buffer, NULL is
returned. The buffer is never freed though.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When destroying a domain libvirt marks it internally with a
beingDestroyed flag to make sure the qemuDomainDestroyFlags API itself
cleans up after the domain rather than letting an uninformed EOF handler
do it. However, when the domain is being started at the moment libvirt
was asked to destroy it, only the starting thread can properly clean up
after the domain and thus it ignores the beingDestroyed flag. Once
qemuDomainDestroyFlags finally gets a job, the domain may not be running
anymore, which should not be reported as an error if the domain has been
starting up.
https://bugzilla.redhat.com/show_bug.cgi?id=1445600
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add a 'cleanup' label and improve the readability of one of the
checks by making it conform to our formatting standard and moving
the corresponding comment.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
In case of real migration (not migrating to file on save, dump etc)
migration info is not complete at time qemu finishes migration
in normal (non postcopy) mode. We need to update disks stats,
downtime info etc. Thus let's not expose this job status as
completed.
To archive this let's set status to 'qemu completed' after
qemu reports migration is finished. It is not visible as complete
job to clients. Cookie code on confirm phase will finally turn
job into completed. As we don't need more things to do when
migrating to file status is set to 'completed' as before
in this case.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When getting job info in case mirror does not reach ready phase
fetch mirror stats from qemu. Otherwise mirror stats are already
saved in current job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Looks like it is more simple to drop this optimization as we are
going to add getting disks stats during migration via quering qemu
process and checking if we have to acquire job condition becomes
more complicate.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of checking stat.status let's set status to migrating
as soon as migrate command is send (waiting for completion
is a good place too).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Setting status to none has little value - getting job status
will not return even elapsed time.
After this patch getting job stats stays correct in a sence
it will not fetch migration stats because it consults
stats.status before doing the fetch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Querying destination migration statistics may result in getting
a failure or getting a elapsed time value depending on stats.status
value which is odd. Instead let's always fail. Clients should
be ready to handle this as currently getting failure period
can be considerable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuMigrationFetchJobStatus is rather inconvinient. Some of its
callers don't need status to be updated, some don't need to update
elapsed time right away. So let's update status or elapsed time
in callers instead.
This patch drops updating job status on getting job stats by
client. This way we will not provide status 'completed' while
it is not yet updated by migration routine.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This way we get stats only in one place. The former code waits for
complete/postcopy status basically and don't need to mess with stats.
The patch drops raising an error on stats updates failure. This
does not make much sense anyway.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Let's introduce QEMU_DOMAIN_JOB_STATUS_POSTCOPY state for job.current->status
instead of checking job.current->stats.status. The latter can be changed
when fetching migration statistics. Moving state function from the variable
and leave only store function seems more managable.
This patch removes all state checking usage of stats except for
qemuDomainGetJobStatsInternal. This place will be handled separately.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch simply switches code from using VIR_DOMAIN_JOB_* to
introduced QEMU_DOMAIN_JOB_STATUS_*. Later this gives us freedom
to introduce states for postcopy and mirroring phases.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1439991
Whenever a device is being updated via
virDomainUpdateDeviceFlags() API, we parse the device XML and
ideally run some generic checks to validate the configuration
(e.g. if device defines per-device boot order but the domain has
os/boot element already). Well, that's the theory - due to a
missing check we've jumped early from that check function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Neither @cfg nor (now) @driver is used in the API, so remove them
and mark @opaque as UNUSED.
NB: Commit id 'fa3c558596' dropped the unused @qemuCaps which was the
last consumer of @driver other than @cfg, but even @cfg was never used
even in the original implementation from commit id 'd987f63a'.
arm/aarch64 -M virt on KVM doesn't and will never work with standard
VGA card emulation. The recommended method is to use type=virtio, so
let's make it the default for video devices without an explicit type
set by the user.
https://bugzilla.redhat.com/show_bug.cgi?id=1404112
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Will be needed for future patches to pull the default video type
setting out of XML parsing routines.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
There were a few places in our code where the following pattern in 'if'
condition occurred:
if ((foo = bar() < 0))
do something;
This patch adjusts the conditions to the expected format:
if ((foo = bar()) < 0)
do something;
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1488192
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We call qemuDomainGetMachineName on domain start. On first
start (after daemon start) pid is 0 and virSystemdGetMachineNameByPID
don't get called. But after domain shutting down pid became -1 so
on next start virSystemdGetMachineNameByPID is called and returned an error.
Error is ignored so it is not critical. But at least on my system
(systemd-219 with extra patches) systemd-machined is crashed on
this request.
This behaviour is triggered by eaf2c9f89.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1484230
When updating a virtio enabled vNIC and trying to change either
of rx_queue_size or tx_queue_size success is reported although no
operation is actually performed. Moreover, there's no way how to
change these on the fly. This is due to way we check for changes:
explicitly for each struct member. Therefore it's easy to miss
one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently while parsing domain XML we clear the UNIX path if it matches
one of the auto-generated paths by libvirt. After that when the guest
is started new path is generated but the mode is also changed to "bind".
In the real-world use-case the mode should not change, it only happens
if a user provides a mode='connect' and path that matches one of the
auto-generated path or not provides a path at all.
Before *reconnect* feature was introduced there was no issue, but with
the new feature we need to make sure that it's used only with "connect"
mode, therefore we need to move the mode change into parsing in order
to have a proper error reported by validation code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When recreating folders with namespaces, the directory type was not
being handled at all. It's not special, we probably just didn't know
that that can be used as a volume path as well. The code failed
gracefully, but we want to allow that so that we can use <disk
type='dir'> in domains again.
Partially-resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1443434
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This commit adds qemu driver implementation to edit xml
configuration of managed save state file of a domain.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
This commit adds qemu driver implementation to get xml description
for managed save state domain.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1476866
For some reason, we completely ignore <on_reboot/> setting for
domains. The implementation is simply not there. It never was.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This API is definitely modifying state of @vm. Therefore it
should grab a job.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
At some places we either already have synchronous job or we just
released it. Also, some APIs might want to use this code without
having to release their job. Anyway, the job acquire code is
moved out to qemuDomainRemoveInactiveJob so that
qemuDomainRemoveInactive does just what it promises.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Otherwise longer domain names might generate paths that are too long
to be created. This follows what other parts of the code do as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1453194
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The reconnect attribute for chardev devices in QEMU is used to
configure the reconnect timeout in seconds. Setting '0' value disables
the reconnect functionality thus we don't allow to set '0' for QEMU.
To disable the reconnect user should use <reconnect enabled='no'/>.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1254971
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We can't retrieve the isolation group of a device that's not present
in the system. However, it's very common for VFs to be created late
in the boot, so they might not be present yet when libvirtd starts,
which would cause the guests using them to disappear.
Moreover, for other architectures and even ppc64 before isolation
groups were introduced, it's considered perfectly fine to configure a
guest to use a device that's not yet (or no longer) available to the
host, with the obvious caveat that such a guest won't be able to
start before the device is available.
In order to be consistent, when a device's isolation group can't be
determined fall back to not isolating it rather than erroring out or,
worse, making the guest disappear.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1484254
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
To handle setting a default heads value. Convert callers that were
doing it by hand
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
And into DeviceDefValidate which is the expected place
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The ram/vram = 0 bits aren't needed, and PostParse will fill in the
needed QXL default
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Both of these are dead code: qemu_command.c explicitly rejects
VIRT_XEN earlier in the call chain, and qemu_parse_command.c
will never set VIRT_XEN anymore
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
