This function has several calls to increase the buffer indent by 6,
then decrease it again, then increase, then decrease. Additionally,
there were several printfs that had 6 spaces at the beginning of the
line.
virDomainActualNetDefFormat, which is called by virDomainNetDefFormat,
had similar ugliness.
This patch changes both functions to just increase the indent at the
beginning, decrease it at (well, just before*) the end, and remove all
of the occurences of 6/8 spaces at the beginning of lines.
*The indent had to be reset before the end of the function because
virDomainDeviceInfoFormat assumes a 0 indent and is called from many
other places, and I didn't want to do an overhaul of every caller of
that function. A separate patch to switch all of domain_conf.c would
be a useful exercise, but my current goal is unrelated to that, so
I'll leave it for another day.
There was an error: label that simply did "return ret", but ret was
defaulted to -1, and was never used other than setting it manually to
0 just before a non-error return. Aside from this, some of the error
return paths used "goto error" and others used "return ret".
This patch removes ret and the error: label, and makes all error
returns just consistently do "return -1".
virtPortProfile is now used by 4 different types of network devices
(NETWORK, BRIDGE, DIRECT, and HOSTDEV), and it's getting cumbersome to
replicate so much code in 4 different places just because each type
has the virtPortProfile in a slightly different place. This patch puts
a single virtPortProfile in a common place (outside the type-specific
union) in both virDomainNetDef and virDomainActualNetDef, and adjusts
the parse and format code (and the few other places where it is used)
accordingly.
Note that when a <virtualport> element is found, the parse functions
verify that the interface is of a type that supports one, otherwise an
error is generated (CONFIG_UNSUPPORTED in the case of <interface>, and
INTERNAL in the case of <actual>, since the contents of <actual> are
always generated by libvirt itself).
virNetDevVPortProfile has (had) a type field that can be set to one of
several values, and a union of several structs, one for each
type. When a domain's interface object is of type "network", the
domain config may not know beforehand which type of virtualport is
going to be provided in the actual device handed down from the network
driver at runtime, but may want to set some values in the virtualport
that may or may not be used, depending on the type. To support this
usage, this patch replaces the union of structs with toplevel fields
in the struct, making it possible for all of the fields to be set at
the same time.
As the consensus in:
https://www.redhat.com/archives/libvir-list/2012-July/msg01692.html,
this patch is to destroy conf/virdomainlist.[ch], folding the
helpers into conf/domain_conf.[ch].
* src/Makefile.am:
- Various indention fixes incidentally
- Add macro DATATYPES_SOURCES (datatypes.[ch])
- Link datatypes.[ch] for libvirt_lxc
* src/conf/domain_conf.c:
- Move all the stuffs from virdomainlist.c into it
- Use virUnrefDomain and virUnrefDomainSnapshot instead of
virDomainFree and virDomainSnapshotFree, which are defined
in libvirt.c, and we don't want to link to it.
- Remove "if" before "free" the object, as virObjectUnref
is in the list "useless_free_options".
* src/conf/domain_conf.h:
- Move all the stuffs from virdomainlist.h into it
- s/LIST_FILTER/LIST_DOMAINS_FILTER/
* src/libxl/libxl_driver.c:
- s/LIST_FILTER/LIST_DOMAINS_FILTER/
- no (include "virdomainlist.h")
* src/libxl/libxl_driver.c: Likewise
* src/lxc/lxc_driver.c: Likewise
* src/openvz/openvz_driver.c: Likewise
* src/parallels/parallels_driver.c: Likewise
* src/qemu/qemu_driver.c: Likewise
* src/test/test_driver.c: Likewise
* src/uml/uml_driver.c: Likewise
* src/vbox/vbox_tmpl.c: Likewise
* src/vmware/vmware_driver.c: Likewise
* tools/virsh-domain-monitor.c: Likewise
* tools/virsh.c: Likewise
The meat of this patch is just moving the calls to
virNWFilterRegisterCallbackDriver from each hypervisor's "register"
function into its "initialize" function. The rest is just code
movement to allow that, and a new virNWFilterUnRegisterCallbackDriver
function to undo what the register function does.
The long explanation:
There is an array in nwfilter called callbackDrvArray that has
pointers to a table of functions for each hypervisor driver that are
called by nwfilter. One of those function pointers is to a function
that will lock the hypervisor driver. Entries are added to the table
by calling each driver's "register" function, which happens quite
early in libvirtd's startup.
Sometime later, each driver's "initialize" function is called. This
function allocates a driver object and stores a pointer to it in a
static variable that was previously initialized to NULL. (and here's
the important part...) If the "initialize" function fails, the driver
object is freed, and that pointer set back to NULL (but the entry in
nwfilter's callbackDrvArray is still there).
When the "lock the driver" function mentioned above is called, it
assumes that the driver was successfully loaded, so it blindly tries
to call virMutexLock on "driver->lock".
BUT, if the initialize never happened, or if it failed, "driver" is
NULL. And it just happens that "lock" is always the first field in
driver so it is also NULL.
Boom.
To fix this, the call to virNWFilterRegisterCallbackDriver for each
driver shouldn't be called until the end of its (*already guaranteed
successful*) "initialize" function, not during its "register" function
(which is currently the case). This implies that there should also be
a virNWFilterUnregisterCallbackDriver() function that is called in a
driver's "shutdown" function (although in practice, that function is
currently never called).
Otherwise, in locations like virobject.c where PROBE is used,
for certain configure options, the compiler warns:
util/virobject.c:110:1: error: 'intptr_t' undeclared (first use in this function)
As long as we are making this header always available, we can
clean up several other files.
* src/internal.h (includes): Pull in <stdint.h>.
* src/conf/nwfilter_conf.h: Rely on internal.h.
* src/storage/storage_backend.c: Likewise.
* src/storage/storage_backend.h: Likewise.
* src/util/cgroup.c: Likewise.
* src/util/sexpr.h: Likewise.
* src/util/virhashcode.h: Likewise.
* src/util/virnetdevvportprofile.h: Likewise.
* src/util/virnetlink.h: Likewise.
* src/util/virrandom.h: Likewise.
* src/vbox/vbox_driver.c: Likewise.
* src/xenapi/xenapi_driver.c: Likewise.
* src/xenapi/xenapi_utils.c: Likewise.
* src/xenapi/xenapi_utils.h: Likewise.
* src/xenxs/xenxs_private.h: Likewise.
* tests/storagebackendsheepdogtest.c: Likewise.
An ESX server has one or more PhysicalNics that represent the actual
hardware NICs. Those can be listed via the interface driver.
A libvirt virtual network is mapped to a HostVirtualSwitch. On the
physical side a HostVirtualSwitch can be connected to PhysicalNics.
On the virtual side a HostVirtualSwitch has HostPortGroups that are
mapped to libvirt virtual network's portgroups. Typically there is
HostPortGroups named 'VM Network' that is used to connect virtual
machines to a HostVirtualSwitch. A second HostPortGroup typically
named 'Management Network' is used to connect the hypervisor itself
to the HostVirtualSwitch. This one is not mapped to a libvirt virtual
network's portgroup. There can be more HostPortGroups than those
typical two on a HostVirtualSwitch.
+---------------+-------------------+
...---| | | +-------------+
| HostPortGroup | |---| PhysicalNic |
| VM Network | | | vmnic0 |
...---| | | +-------------+
+---------------+ HostVirtualSwitch |
| vSwitch0 |
+---------------+ |
| HostPortGroup | |
...---| Management | |
| Network | |
+---------------+-------------------+
The virtual counterparts of the PhysicalNic is the HostVirtualNic for
the hypervisor and the VirtualEthernetCard for the virtual machines
that are grouped into HostPortGroups.
+---------------------+ +---------------+---...
| VirtualEthernetCard |---| |
+---------------------+ | HostPortGroup |
+---------------------+ | VM Network |
| VirtualEthernetCard |---| |
+---------------------+ +---------------+
|
+---------------+
+---------------------+ | HostPortGroup |
| HostVirtualNic |---| Management |
+---------------------+ | Network |
+---------------+---...
The currently implemented network driver can list, define and undefine
HostVirtualSwitches including HostPortGroups for virtual machines.
Existing HostVirtualSwitches cannot be edited yet. This will be added
in a followup patch.
Switch virDomainObjPtr to use the virObject APIs for reference
counting. The main change is that virObjectUnref does not return
the reference count, merely a bool indicating whether the object
still has any refs left. Checking the return value is also not
mandatory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This converts the following public API datatypes to use the
virObject infrastructure:
virConnectPtr
virDomainPtr
virDomainSnapshotPtr
virInterfacePtr
virNetworkPtr
virNodeDevicePtr
virNWFilterPtr
virSecretPtr
virStreamPtr
virStorageVolPtr
virStoragePoolPtr
The code is significantly simplified, since the mutex in the
virConnectPtr object now only needs to be held when accessing
the per-connection virError object instance. All other operations
are completely lock free.
* src/datatypes.c, src/datatypes.h, src/libvirt.c: Convert
public datatypes to use virObject
* src/conf/domain_event.c, src/phyp/phyp_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_migration.c,
src/qemu/qemu_process.c, src/storage/storage_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
tests/qemuxml2argvtest.c, tests/qemuxmlnstest.c,
tests/sexpr2xmltest.c, tests/xmconfigtest.c: Convert
to use virObjectUnref/virObjectRef
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit ba226d334acbc49f6751b430e0c4e00f69eef6bf tried to fix crash of
the daemon when a domain with an open console was destroyed. The fix was
wrong as it tried to remove the callback also when the stream was
aborted, where at that point the fd stream driver was already freed and
removed.
This patch clears the callbacks with a helper right before the hash is
freed, so that it doesn't interfere with other codepaths where the
stream object is freed.
* src/conf/domain_conf.c:
- Add virDomainControllerFind to find controller device by type
and index.
- Add virDomainControllerRemove to remove the controller device
from maintained controler list.
* src/conf/domain_conf.h:
- Declare the two new helpers.
* src/libvirt_private.syms:
- Expose private symbols for the two new helpers.
* src/qemu/qemu_driver.c:
- Support attach/detach controller device persistently
* src/qemu/qemu_hotplug.c:
- Use the two helpers to simplify the codes.
The access, birth, modification and change times are added to
storage volumes and corresponding xml representations. This
shows up in the XML in this format:
<timestamps>
<atime>1341933637.027319099</atime>
<mtime>1341933637.027319099</mtime>
</timestamps>
Signed-off-by: Eric Blake <eblake@redhat.com>
capability.rng: Guest features can be in any order.
nodedev.rng: Added <driver> element, <capability> phys_function and
virt_functions for PCI devices.
storagepool.rng: Owner or group ID can be -1.
schema tests: New capabilities and nodedev files; changed owner and
group to -1 in pool-dir.xml.
storage_conf: Print uid_t and gid_t as signed to storage pool XML.
This patch adds helpers that validate domain's device configuration.
This will be needed later on to verify devices being hot-plugged to
guests. If the guest has no USB bus, then it's not valid to plug a USB
device to that guest.
Libvirt adds a USB controller to the guest even if the user does not
specify any in the XML. This is due to back-compat reasons.
To allow disabling USB for a guest this patch adds a new USB controller
type "none" that disables USB support for the guest.
Parallels Cloud Server is a cloud-ready virtualization
solution that allows users to simultaneously run multiple virtual
machines and containers on the same physical server.
More information can be found here: http://www.parallels.com/products/pcs/
Also beta version of Parallels Cloud Server can be downloaded there.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Any time we have a string with no % passed through gettext, a
translator can inject a % to cause a stack overread. When there
is nothing to format, it's easier to ask for a string that cannot
be used as a formatter, by using a trivial "%s" format instead.
In the past, we have used --disable-nls to catch some of the
offenders, but that doesn't get run very often, and many more
uses have crept in. Syntax check to the rescue!
The syntax check can catch uses such as
virReportError(code,
_("split "
"string"));
by using a sed script to fold context lines into one pattern
space before checking for a string without %.
This patch is just mechanical insertion of %s; there are probably
several messages touched by this patch where we would be better
off giving the user more information than a fixed string.
* cfg.mk (sc_prohibit_diagnostic_without_format): New rule.
* src/datatypes.c (virUnrefConnect, virGetDomain)
(virUnrefDomain, virGetNetwork, virUnrefNetwork, virGetInterface)
(virUnrefInterface, virGetStoragePool, virUnrefStoragePool)
(virGetStorageVol, virUnrefStorageVol, virGetNodeDevice)
(virGetSecret, virUnrefSecret, virGetNWFilter, virUnrefNWFilter)
(virGetDomainSnapshot, virUnrefDomainSnapshot): Add %s wrapper.
* src/lxc/lxc_driver.c (lxcDomainSetBlkioParameters)
(lxcDomainGetBlkioParameters): Likewise.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML)
(virDomainDiskDefParseXML, virDomainGraphicsDefParseXML):
Likewise.
* src/conf/network_conf.c (virNetworkDNSHostsDefParseXML)
(virNetworkDefParseXML): Likewise.
* src/conf/nwfilter_conf.c (virNWFilterIsValidChainName):
Likewise.
* src/conf/nwfilter_params.c (virNWFilterVarValueCreateSimple)
(virNWFilterVarAccessParse): Likewise.
* src/libvirt.c (virDomainSave, virDomainSaveFlags)
(virDomainRestore, virDomainRestoreFlags)
(virDomainSaveImageGetXMLDesc, virDomainSaveImageDefineXML)
(virDomainCoreDump, virDomainGetXMLDesc)
(virDomainMigrateVersion1, virDomainMigrateVersion2)
(virDomainMigrateVersion3, virDomainMigrate, virDomainMigrate2)
(virStreamSendAll, virStreamRecvAll)
(virDomainSnapshotGetXMLDesc): Likewise.
* src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopReqLeaseDel)
(virNWFilterDHCPSnoopReq): Likewise.
* src/openvz/openvz_driver.c (openvzUpdateDevice): Likewise.
* src/openvz/openvz_util.c (openvzKBPerPages): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupCgroup): Likewise.
* src/qemu/qemu_command.c (qemuBuildHubDevStr, qemuBuildChrChardevStr)
(qemuBuildCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/rpc/virnetsaslcontext.c (virNetSASLSessionGetIdentity):
Likewise.
* src/rpc/virnetsocket.c (virNetSocketNewConnectUNIX)
(virNetSocketSendFD, virNetSocketRecvFD): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskBuildPool): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemProbe)
(virStorageBackendFileSystemBuild): Likewise.
* src/storage/storage_backend_rbd.c
(virStorageBackendRBDOpenRADOSConn): Likewise.
* src/storage/storage_driver.c (storageVolumeResize): Likewise.
* src/test/test_driver.c (testInterfaceChangeBegin)
(testInterfaceChangeCommit, testInterfaceChangeRollback):
Likewise.
* src/vbox/vbox_tmpl.c (vboxListAllDomains): Likewise.
* src/xenxs/xen_sxpr.c (xenFormatSxprDisk, xenFormatSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenXMConfigGetUUID, xenFormatXMDisk)
(xenFormatXM): Likewise.
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.
A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.
A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.
In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.
<disk type='network'>
...
<source protocol="sheepdog" name="vdi_name">
<host name="localhost" port="7000"/>
</source>
</disk>
To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
When the guest changes its memory balloon applications may want
to know what the new value is, without having to periodically
poll on XML / domain info. Introduce a "balloon change" event
to let apps see this
* include/libvirt/libvirt.h.in: Define the
virConnectDomainEventBalloonChangeCallback callback
and VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE constant
* python/libvirt-override-virConnect.py,
python/libvirt-override.c: Wire up helpers for new event
* daemon/remote.c: Helper for serializing balloon event
* examples/domain-events/events-c/event-test.c,
examples/domain-events/events-python/event-test.py: Add
example of balloon event usage
* src/conf/domain_event.c, src/conf/domain_event.h: Handling
of balloon events
* src/remote/remote_driver.c: Add handler of balloon events
* src/remote/remote_protocol.x: Define wire protocol for
balloon events
* src/remote_protocol-structs: Likewise.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Per the typical use of libvirt is to fork the qemu process with
qemu:qemu. Setting the pool permission mode as 0700 by default
will prevent the guest start with permission reason.
Define macro for the default pool and vol permission modes
incidentally.
The s390(x) architecture doesn't feature a PCI bus. For the purpose of
supporting virtio devices a virtual bus called virtio-s390 is used.
A new address type VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_S390 is used to
distinguish the virtio devices on s390 from PCI-based virtio devices.
V3 Change: updated QEMU_CAPS_VIRTIO_S390 to fit upstream.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reported by Jason Helfman as a build-breaker on FreeBSD.
* src/conf/domain_conf.c (virDomainFSDefParseXML): Use POSIX
spelling.
* src/openvz/openvz_conf.c (openvzReadFSConf): Likewise.
Below patch fixes this coverity report:
/libvirt/src/conf/nwfilter_conf.c:382:
leaked_storage: Variable "varAccess" going out of scope leaks the storage it points to.
If the user specified invalid protocol type in a network's SRV record
the error path ended up in freeing uninitialized pointers causing a
daemon crash.
*network_conf.c: virNetworkDNSSrvDefParseXML(): initialize local
variables
virConnectDomainEventRegisterAny() takes a domain as an argument.
So it should be possible to register the same event (be it
VIR_DOMAIN_EVENT_ID_LIFECYCLE for example) for two different domains.
That is, we need to take domain into account when searching for
duplicate event being already registered.
Currently you can configure LXC to bind a host directory to
a guest directory, but not to bind a guest directory to a
guest directory. While the guest container init could do
this itself, allowing it in the libvirt XML means a stricter
SELinux policy can be written
Introduce a new syntax for filesystems to allow use of a RAM
filesystem
<filesystem type='ram'>
<source usage='10' units='MiB'/>
<target dir='/mnt'/>
</filesystem>
The usage units default to KiB to limit consumption of host memory.
* docs/formatdomain.html.in: Document new syntax
* docs/schemas/domaincommon.rng: Add new attributes
* src/conf/domain_conf.c: Parsing/formatting of RAM filesystems
* src/lxc/lxc_container.c: Mounting of RAM filesystems
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Wraps the conversion from 'char *name' to virDomainSnapshotPtr in
a reusable manner.
* src/conf/virdomainlist.h (virDomainListSnapshots): New declaration.
* src/conf/virdomainlist.c (virDomainListSnapshots): Implement it.
* src/libvirt_private.syms (virdomainlist.h): Export it.
It turns out that one-bit filtering makes it hard to select the inverse
set, so it is easier to provide filtering groups. For back-compat,
omitting all bits within a group means the group is not used for
filtering, and by definition of a group (each snapshot matches exactly
one bit within the group, and the set of bits in the group covers all
snapshots), selecting all bits also makes the group useless.
Unfortunately, virDomainSnapshotListChildren defined the bit
VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS as an expansion rather than a
filter, so we cannot make it part of a filter group, so that bit
(and its counterpart VIR_DOMAIN_SNAPSHOT_LIST_ROOTS for
virDomainSnapshotList) remains a single control bit.
* include/libvirt/libvirt.h.in (virDomainSnapshotListFlags): Add a
couple more flags.
* src/libvirt.c (virDomainSnapshotNum)
(virDomainSnapshotNumChildren): Document them.
(virDomainSnapshotListNames, virDomainSnapshotListChildrenNames):
Likewise, and add thread-safety caveats.
* src/conf/virdomainlist.h (VIR_DOMAIN_SNAPSHOT_FILTERS_*): New
convenience macros.
* src/conf/domain_conf.c (virDomainSnapshotObjListCopyNames)
(virDomainSnapshotObjListCount): Support the new flags.
Until now, it was possible to crash libvirtd when defining domain with
channel device with missing source element.
When creating new virDomainChrDef, target.port is set to -1, but
unfortunately it is an union with addresses that virDomainChrDefFree
tries to free in case the deviceType is channel. Having the port set
to -1 is intended, however the cleanest way to get around the problems
with the crash seems to be renumbering the VIR_DOMAIN_CHR_CHANNEL_
target types to cover new NONE type (with value 0) being the default
(no target type yet).
Another case where we can do the same amount of work with fewer
lines of redundant code, which will make adding new filters easier.
* src/conf/domain_conf.c (virDomainSnapshotNameData): Adjust
struct.
(virDomainSnapshotObjListCount): Delete, now taken care of...
(virDomainSnapshotObjListCopyNames): ...here.
(virDomainSnapshotObjListGetNames): Adjust caller to handle
counting.
(virDomainSnapshotObjListNum): Simplify.
Now that domain listing is a thin wrapper around child listing,
it's easier to have a common entry point. This restores the
hashForEach optimization lost in the previous patch when there
are no snapshots being filtered out of the entire list.
* src/conf/domain_conf.h (virDomainSnapshotObjListGetNames)
(virDomainSnapshotObjListNum): Add parameter.
(virDomainSnapshotObjListGetNamesFrom)
(virDomainSnapshotObjListNumFrom): Delete.
* src/libvirt_private.syms (domain_conf.h): Drop deleted functions.
* src/conf/domain_conf.c (virDomainSnapshotObjListGetNames):
Merge, and (re)add an optimization.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags)
(qemuDomainSnapshotListNames, qemuDomainSnapshotNum)
(qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren): Update callers.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Likewise.
* src/conf/virdomainlist.c (virDomainListPopulate): Likewise.
This idea was first suggested by Daniel Veillard here:
https://www.redhat.com/archives/libvir-list/2011-October/msg00353.html
Now that I am about to add more complexity to snapshot listing, it
makes sense to avoid code duplication and special casing for domain
listing (all snapshots) vs. snapshot listing (descendants); adding
a metaroot reduces the number of code lines by having the domain
listing turn into a descendant listing of the metaroot.
Note that this has one minor pessimization - if we are going to list
ALL snapshots without filtering, then virHashForeach is more efficient
than recursing through the child relationships; restoring that minor
optimization will occur in the next patch.
* src/conf/domain_conf.h (_virDomainSnapshotObj)
(_virDomainSnapshotObjList): Repurpose some fields.
(virDomainSnapshotDropParent): Drop unused parameter.
* src/conf/domain_conf.c (virDomainSnapshotObjListGetNames)
(virDomainSnapshotObjListCount): Simplify.
(virDomainSnapshotFindByName, virDomainSnapshotSetRelations)
(virDomainSnapshotDropParent): Match new field semantics.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML)
(qemuDomainSnapshotReparentChildren, qemuDomainSnapshotDelete):
Adjust clients.
This patch adds common code to list domains in fashion used by
virListAllDomains with all currently supported flags. The header file
also contains macros that group filters together that are used to
shorten filter conditions.
This patch stores existence of the image in the object. At start of the
daemon the state is checked and then updated in key moments in domain
lifecycle.
