To avoid memory leak of the "backingStoreRaw" field when reparsing
backing chains a new function is being introduced by this patch that
shall be used to clear backing store information.
The memory leak was introduced in commit 8823272d41a259c1246c05d.
This commit provides the ability to virDomainMigrateToURI to
check for SASL credentials when attempts to migrate a domain
with the driver QEMU.
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@cloudwatt.com>
When EIO comes to qemu while it's replying to
qemuMigrationUpdateJobStatus(), qemu blocks, the migration of RAM can
complete in the meantime, and when qemu unblocks, it sends us
BLOCK_IO_ERROR plus migrations "status": "complete". Even though we
act upon the BLOCK_IO_ERROR by setting the proper state of the domain,
the call still waits for the proper reply on monitor for query_migrate
and after it gets it, it checks that migration is completed and the
migration is finished. This is what abort_on_error flag was meant for
(we can migrate with these errors, but this flag must inhibit such
behaviour). Changing the order of the steps guarantees the flag works
properly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1045833
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Convert all remaining clients of readdir to use the new
interface, so that we can ensure (unlikely) errors while
reading a directory are reported.
* src/openvz/openvz_conf.c (openvzAssignUUIDs): Use new
interface.
* src/parallels/parallels_storage.c (parallelsFindVolumes)
(parallelsFindVmVolumes): Report readdir failures.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Ignore readdir
failures.
* src/secret/secret_driver.c (loadSecrets): Likewise.
* src/qemu/qemu_hostdev.c
(qemuHostdevHostSupportsPassthroughVFIO): Report readdir failures.
* src/xen/xen_inotify.c (xenInotifyOpen): Likewise.
* src/xen/xm_internal.c (xenXMConfigCacheRefresh): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
When a snapshot operation finishes we have to recheck the backing chain
of all disks involved in the snapshot. And we need to do that even if
the operation failed because some of the disks might have changed if
QEMU did not support transactions.
The check for a network being active during interface attach was being
done individually in several places (by both the lxc driver and the
qemu driver), but those places were too specific, leading to it *not*
being checked when allocating a connection/device from a macvtap or
hostdev network.
This patch puts a single check in networkAllocateActualDevice(), which
is always called before the any network interface is attached to any
type of domain. It also removes all the other now-redundant checks
from the lxc and qemu drivers.
NB: the following patches are prerequisites for this patch, in the
case that it is backported to any branch:
440beeb network: fix virNetworkObjAssignDef and persistence
8aaa5b6 network: create statedir during driver initialization
b9e9549 network: change location of network state xml files
411c548 network: set macvtap/hostdev networks active if their state
file exists
This fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=880483
When a VM fails to launch due to error creating nwfilter
rules, we must avoid overwriting the original error when
tearing down the partially created rules.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit c4206d7 fixed the overflow for running domains. However, we need
a similar check when setting migration speed on inactive domains.
At first look, it may seem the check in c4206d7 is now redundant but
qemuDomainMigrateSetMaxSpeed is not the only caller of
qemuMonitorSetMigrationSpeed so we need to check the bandwidth in both
places.
https://bugzilla.redhat.com/show_bug.cgi?id=1083483
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Each backing store of a given disk is associated with a unique index
(which is also formatted in domain XML) for easier addressing of any
particular backing store. With this patch, any backing store can be
addressed by its disk target and the index. For example, "vdc[4]"
addresses the backing store with index equal to 4 of the disk identified
by "vdc" target. Such shorthand can be used in any API in place for a
backing file path:
virsh blockcommit domain vda --base vda[3] --top vda[2]
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virStorageFileChainLookup is able to give use virStorageSourcePtr which
contains the pointer to its canonical path. Let's use a more general
virStorageSourcePtr instead of just canonical path.
Former base_canon maps to baseSource->path.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virStorageFileChainLookup is able to give use virStorageSourcePtr which
contains the pointer to its canonical path. There's no need for the
caller to store both of them.
Former top_meta maps to topSource and top_canon maps to topSource->path.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Recent discussions around naming of 'pci' vs 'pci.0' for PPC
made me go back and look at the PPC emulator in every historical
version of QEMU since 1.0. The results were worse than I imagined.
This patch adds the logic required to make libvirt work with PPC
correctly with naming variations across all versions & machine
types.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To avoid having the root of a backing chain present twice in the list we
need to invert the working of virStorageFileGetMetadataRecurse.
Until now the recursive worker created a new backing chain element from
the name and other information passed as arguments. This required us to
pass the data of the parent in a deconstructed way and the worker
created a new entry for the parent.
This patch converts this function so that it just fills in metadata
about the parent and creates a backing chain element from those. This
removes the duplication of the first element.
To avoid breaking the test suite, virstoragetest now calls a wrapper
that creates the parent structure explicitly and pre-fills it with the
test data with same function signature as previously used.
Switch over to storing of the backing chain as a recursive
virStorageSource structure.
This is a string based move. Currently the first element will be present
twice in the backing chain as currently the retrieval function stores
the parent in the newly detected chain. This will be fixed later.
Remove the obsolete field replaced by data in "path".
The testsuite requires tweaking as the name of the backing file is now
stored one layer deeper in the backing chain linked list.
Currently, libvirt is using legacy USB controller as default. There
are problems with VGA which can't work correctly with USB Keyboard and
USB Mouse.
While providing -nodefaults, ppc64 should be specifying the usb
controller explicitly in place of using the legacy
controller(-usb). Qemu spapr initialization code when sees "-usb" adds a
USB Keyboard and USB Mouse by default. And libvirt has added a USB
keyboard and USB mouse.
A recent fix in the in qemu VGA code uncoverd this problem, which
resulted in addition of extra keyboard and mouse to the qemu machine.
This patch is to set pci-ohci as USB default controller.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Remove the pointer from def->cputune.vcpupin after unplugging
the CPU and also free the bitmap contained in the structure
by calling virDomainVcpuPinDel instead of VIR_FREE.
Introduced by commit 0df1a79.
This makes virDomainLookupVcpuPin redundant.
https://bugzilla.redhat.com/show_bug.cgi?id=1088165
When passing migration bandwidth to QEMU, we multiply it by 1024 * 1024
to convert the speed to B/s and the result still needs to fit in
int64_t.
https://bugzilla.redhat.com/show_bug.cgi?id=1083483
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The original chain lookup code had to pass in the starting name,
because it was not available in the chain. But now that we have
added fields to the struct, this parameter is redundant.
* src/util/virstoragefile.h (virStorageFileChainLookup): Alter
signature.
* src/util/virstoragefile.c (virStorageFileChainLookup): Adjust
handling of top of chain.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Adjust caller.
* tests/virstoragetest.c (testStorageLookup, mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The chain lookup function was inconsistent on whether it left
a message in the log when looking up a name that is not found
on the chain (leaving a message for OOM or if name was
relative but not part of the chain), and could litter the log
even when successful (when name was relative but deep in the
chain, use of virFindBackingFile early in the chain would complain
about a file not found). It's easier to make the function
consistently emit a message exactly once on failure, and to let
all callers rely on the clean semantics.
* src/util/virstoragefile.c (virStorageFileChainLookup): Always
report error on failure. Simplify relative lookups.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Avoid
overwriting error.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, virCgroupGetPercpuStats is only used by the LXC driver,
filling out the CPUTIME stats. qemuDomainGetPercpuStats does this
and also filles out VCPUTIME stats.
Extend virCgroupGetPercpuStats to also report VCPUTIME stats if
nvcpupids is non-zero. In the LXC driver, we don't have cpupids.
In the QEMU driver, there is at least one cpupid for a running domain,
so the behavior shouldn't change for QEMU either.
Also rename getSumVcpuPercpuStats to virCgroupGetPercpuVcpuSum.
Refactor the function to avoid multiple wrappers splitting identical
fields from the now common metadata struct.
The refactor is done by folding in the wrapper used for disk sources
which allows us to lookup secrets via the secret driver. This may allow
using stored secrets for snapshot disk images too in the future.
Now that we store all metadata about a storage image in a
virStorageSource struct let's use it also to store information needed by
the storage driver to access and do operations on the files.
Since it is an abbreviation, PCI should always be fully
capitalized or full lower case, never Pci.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since it is an abbreviation, USB should always be fully
capitalized or full lower case, never Usb.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since it is an abbreviation, SCSI should always be fully
capitalized or full lower case, never Scsi.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I almost wrote a hash value free function that just called
VIR_FREE, then realized I couldn't be the first person to
do that. Sure enough, it was worth factoring into a common
helper routine.
* src/util/virhash.h (virHashValueFree): New function.
* src/util/virhash.c (virHashValueFree): Implement it.
* src/util/virobject.h (virObjectFreeHashData): New function.
* src/libvirt_private.syms (virhash.h, virobject.h): Export them.
* src/nwfilter/nwfilter_learnipaddr.c (virNWFilterLearnInit): Use
common function.
* src/qemu/qemu_capabilities.c (virQEMUCapsCacheNew): Likewise.
* src/qemu/qemu_command.c (qemuDomainCCWAddressSetCreate):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorGetBlockInfo): Likewise.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Likewise.
* src/util/virclosecallbacks.c (virCloseCallbacksNew): Likewise.
* src/util/virkeyfile.c (virKeyFileParseGroup): Likewise.
* tests/qemumonitorjsontest.c
(testQemuMonitorJSONqemuMonitorJSONGetBlockInfo): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
nmdm is a FreeBSD driver which allows to create a pair of tty
devices one of which is passed to the guest and second is used
by the client.
This patch adds new 'nmdm' character device type. Its definition
looks this way:
<serial type='nmdm'>
<source master='/dev/nmdm0A' slave='/dev/nmdm0B'/>
</serial>
Master is passed to the hypervisior and slave is used for client
connection.
Also implement domainOpenConsole() for bhyve driver based on that.
Right now, virStorageFileMetadata tracks bool backingStoreIsFile
for whether the backing string specified in metadata can be
resolved as a file (covering both block and regular file
resources) or is treated as a network protocol. But when
merging this struct with virStorageSource, it will be easier
to just actually track which type of resource it is, as well
as have a reserved value for the case where the resource type
is unknown (or had an error during probing).
* src/util/virstoragefile.h (virStorageType): Add a placeholder
value, swap order to match similar public enum.
* src/util/virstoragefile.c (virStorage): Update string mapping.
* src/conf/domain_conf.c (virDomainDiskSourceParse)
(virDomainDiskDefParseXML, virDomainDiskDefFormat)
(virDomainDiskSourceFormat): Adjust clients.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefParseXML):
Likewise.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskExternalOverlayActive)
(qemuDomainSnapshotPrepareDiskExternalOverlayInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
* src/qemu/qemu_command.c (qemuGetDriveSourceString): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 5b3492fa aimed to fix this and caught one error but exposed
another one. When agent command is being executed and the thread
waiting for the reply is woken up by an event (e.g. EOF in case of
shutdown), the command finishes with no data (rxObject == NULL), but
no error is reported, since this might be desired by the caller
(e.g. suspend through agent). However, in other situations, when the
data are required (e.g. getting vCPUs), we proceed to getting desired
data out of the reply, but none of the virJSON*() functions works well
with NULLs. I chose the way of a new parameter for qemuAgentCommand()
function that specifies whether reply is required and behaves
according to that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1058149
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Every caller checked the return value and logged an error
- one if no device with the specified MAC was found,
other if there were multiple devices matching the MAC address
(except for qemuDomainUpdateDeviceConfig which logged the same
message in both cases).
Move the error reporting into virDomainNetFindIdx, since in both cases,
we couldn't find one single match - it's just the error messages that
differ.
On all the places where qemuAgentComand() was called, we did a check
for errors in the reply. Unfortunately, some of the places called
qemuAgentCheckError() without checking for non-null reply which might
have resulted in a crash.
So this patch makes the error-checking part of qemuAgentCommand()
itself, which:
a) makes it look better,
b) makes the check mandatory and, most importantly,
c) checks for the errors if and only if it is appropriate.
This actually fixes a potential crashers when qemuAgentComand()
returned 0, but reply was NULL. Having said that, it *should* fix the
following bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1058149
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
