Commit Graph

6 Commits

Author SHA1 Message Date
Michal Privoznik
ec6474b245 bandwidth: add new 'floor' attribute
This is however supported only on domain interfaces with
type='network'. Moreover, target network needs to have at least
inbound QoS set. This is required by hierarchical traffic shaping.

From now on, the required attribute for <inbound/> is either 'average'
(old) or 'floor' (new). This new attribute can be used just for
interfaces type of network (<interface type='network'/>) currently.
2012-12-11 18:35:12 +01:00
Laine Stump
3f9274a524 conf: add <vlan> element to network and domain interface elements
The following config elements now support a <vlan> subelements:

within a domain: <interface>, and the <actual> subelement of <interface>
within a network: the toplevel, as well as any <portgroup>

Each vlan element must have one or more <tag id='n'/> subelements.  If
there is more than one tag, it is assumed that vlan trunking is being
requested. If trunking is required with only a single tag, the
attribute "trunk='yes'" should be added to the toplevel <vlan>
element.

Some examples:

  <interface type='hostdev'/>
    <vlan>
      <tag id='42'/>
    </vlan>
    <mac address='52:54:00:12:34:56'/>
    ...
  </interface>

  <network>
    <name>vlan-net</name>
    <vlan trunk='yes'>
      <tag id='30'/>
    </vlan>
    <virtualport type='openvswitch'/>
  </network>

  <interface type='network'/>
    <source network='vlan-net'/>
    ...
  </interface>

  <network>
    <name>trunk-vlan</name>
    <vlan>
      <tag id='42'/>
      <tag id='43'/>
    </vlan>
    ...
  </network>

  <network>
    <name>multi</name>
    ...
    <portgroup name='production'/>
      <vlan>
        <tag id='42'/>
      </vlan>
    </portgroup>
    <portgroup name='test'/>
      <vlan>
        <tag id='666'/>
      </vlan>
    </portgroup>
  </network>

  <interface type='network'/>
    <source network='multi' portgroup='test'/>
    ...
  </interface>

IMPORTANT NOTE: As of this patch there is no backend support for the
vlan element for *any* network device type. When support is added in
later patches, it will only be for those select network types that
support setting up a vlan on the host side, without the guest's
involvement. (For example, it will be possible to configure a vlan for
a guest connected to an openvswitch bridge, but it won't be possible
to do that for one that is connected to a standard Linux host bridge.)
2012-08-15 13:10:57 -04:00
Laine Stump
4af3cbafdd conf: support partially-specified <virtualport> in parser and formatter
Until now, all attributes in a <virtualport> parameter list that were
acceptable for a particular type, were also required. There were no
optional attributes.

One of the aims of supporting <virtualport> in libvirt's virtual
networks and portgroups is to allow specifying the group-wide
parameters in the network's virtualport, and merge that with the
interface's virtualport, which will have the instance-specific info
(i.e. the interfaceid or instanceid).

Additionally, the guest's interface XML shouldn't need to know what
type of network connection will be used prior to runtime - it could be
openvswitch, 802.1Qbh, 802.1Qbg, or none of the above - but should
still be able to specify instance-specific info just in case it turns
out to be applicable.

Finally, up to now, the parser for virtualport has always generated a
random instanceid/interfaceid when appropriate, making it impossible
to leave it blank (which is what's required for virtualports within a
network/portprofile definition).

This patch modifies the parser and formatter of the <virtualport>
element in the following ways:

* because most of the attributes in a virNetDevVPortProfile are fixed
  size binary data with no reserved values, there is no way to embed a
  "this value wasn't specified" sentinel into the existing data. To
  solve this problem, the new *_specified fields in the
  virNetDevVPortProfile object that were added in a previous patch of
  this series are now set when the corresponding attribute is present
  during the parse.

* allow parsing/formatting a <virtualport> that has no type set. In
  this case, all fields are settable, but all are also optional.

* add a GENERATE_MISSING_DEFAULTS flag to the parser - if this flag is
  set and an instanceid/interfaceid is expected but not provided, a
  random one will be generated. This was previously the default
  behavior, but is now done only for virtualports inside an
  <interface> definition, not for those in <network> or <portgroup>.

* add a REQUIRE_ALL_ATTRIBUTES flag to the parser - if this flag is
  set the parser will call the new
  virNetDevVPortProfileCheckComplete() functions at the end of the
  parser to check for any missing attributes (based on type), and
  return failure if anything is missing. This used to be default
  behavior. Now it is only used for the virtualport defined inside an
  interface's <actual> element (by the time you've figured out the
  contents of <actual>, you should have all the necessary data to fill
  in the entire virtualport)

* add a REQUIRE_TYPE flag to the parser - if this flag is set, the
  parser will return an error if the virtualport has no type
  attribute. This also was previously the default behavior, but isn't
  needed in the case of the virtualport for a type='network' interface
  (i.e. the exact type isn't yet known), or the virtualport of a
  portgroup (i.e. the portgroup just has modifiers for the network's
  virtualport, which *does* require a type) - in those cases, the
  check will be done at domain startup, once the final virtualport is
  assembled (this is handled in the next patch).
2012-08-14 15:47:50 -04:00
Michal Novotny
973af2362c Implement DNS SRV record into the bridge driver
Hi,
this is the fifth version of my SRV record for DNSMasq patch rebased
for the current codebase to the bridge driver and libvirt XML file to
include support for the SRV records in the DNS. The syntax is based on
DNSMasq man page and tests for both xml2xml and xml2argv were added as
well. There are some things written a better way in comparison with
version 4, mainly there's no hack in tests/networkxml2argvtest.c and
also the xPath context is changed to use a simpler query using the
virXPathInt() function relative to the current node.

Also, the patch is also fixing the networkxml2argv test to pass both
checks, i.e. both unit tests and also syntax check.

Please review,
Michal

Signed-off-by: Michal Novotny <minovotn@redhat.com>
2012-01-02 23:05:55 +08:00
Michal Privoznik
a8923162c9 bandwidth: Define schema and create documentation
Define new 'bandwidth' element with possible child element 'inbound'
and 'outbound' addressing incoming and outgoing traffic respectively:

<bandwidth>
  <inbound average='1000' peak='2000' burst='5120'/>
  <outbound average='500'/>
</bandwidth>

Leaving any element out means not to shape traffic in that
direction.
The units for average and peak (rate) are in kilobytes per second,
for burst (size) are just in kilobytes.
This element can be inserted into domain's 'interface' and
'network'.
2011-07-25 13:49:06 +08:00
Laine Stump
a3d95b550b conf: put virtPortProfile struct / functions in a common location
virtPortProfiles are currently only used in the domain XML, but will
soon also be used in the network XML. To prepare for that change, this
patch moves the structure definition into util/network.h and the parse
and format functions into util/network.c (I decided that this was a
better choice than macvtap.h/c for something that needed to always be
available on all platforms).
2011-07-21 14:46:33 -04:00