This commit enables libvirt users to use layered encryption
of RBD images, using the librbd encryption engine.
This allows opening of an encrypted cloned image
whose parent is encrypted with a possibly different encryption key.
To open such images, multiple encryption secrets are expected
to be defined under the encryption XML tag.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Some APIs (migration, save/restore, snapshot, ...) require a domain to
be suspended temporarily. In case resuming the domain fails, the domain
will be unexpectedly left paused when the API finishes. This situation
is reported via VIR_DOMAIN_EVENT_SUSPENDED event with
VIR_DOMAIN_EVENT_SUSPENDED_API_ERROR detail. But we do not have a
corresponding reason for VIR_DOMAIN_PAUSED state and the reason would
remain set to the value used when the domain was paused. So the state
reason would suggest the operation is still running.
This patch changes the state reason to a new VIR_DOMAIN_PAUSED_API_ERROR
to make it clear the API that paused the domain already finished, but
failed to resume the domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently it's only possible to set this parameter during domain
creation via QEMU commandline passthrough feature.
With the new delay attribute it's also possible to set this
parameter if you want to attach a new NBD disk
using "virsh attach-device domain device.xml" e.g.:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='nbd' name='foo'>
<host name='example.org' port='6000'/>
<reconnect delay='10'/>
</source>
<target dev='vdb' bus='virtio'/>
</disk>
Signed-off-by: Christian Nautze <christian.nautze@exoscale.ch>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than storing the video type as an integer, use the proper enum
type within the struct.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In virDomainVideoModelDefParseXML(), use the virXMLProp* functions
rather than reimplementing them with virXPath* functions.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function allows you to specify a default value to return if the
property is not found rather than always setting *result to 0.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Factor out a separate function to parse out the <model> element for
video devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ensure that new virDomainVideoDef objects have their 'type' set to
VIR_DOMAIN_VIDEO_TYPE_DEFAULT and remove places that this value is set
after construction. Since virDomainVideoDefNew() uses g_new0() allocate
the instance, all fields are initialized to 0.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make all callers always pass a valid pointer which in turn allows us to
remove return value check from the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make all callers always pass a valid pointer which in turn allows us to
remove return value check from the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function doesn't use XPath at all. Don't pass the context to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When fetching stats for a domain's <interface/>, or when setting
up its QoS, we can face two situations:
1) the device "shares" the host view, meaning each packet
sent/received on the interface by a domain is accounted for in
the same category on the host, or
2) the device is at the other side, and a packet send by a
domain, is in fact packet received on the host.
This fact affects whether we need to swap RX/TX values when
fetching stats, or setting up QoS. We have this convenient helper
function (virDomainNetTypeSharesHostView()), which returns to
which category given interface type falls into.
Now, for unmanaged type='ethernet' our options are quite limited,
because it's user's responsibility to set up the host side of the
interface. And it can be just anything. Fortunately, we have
another convenience function (virNetDevMacVLanIsMacvtap()), which
determines whether given interface is a macvtap (which is
notoriously known for falling into the first category).
Let's use it to help virDomainNetTypeSharesHostView() determine
the view more accurately.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2175449
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
All of the drivers will reject this value, at least for now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The default is raw, which corresponds to the historical
behavior and is also the only accepted value, at least for
now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now, this results in loader->nvram being NULL, which is
reasonable: loader->nvramTemplate is stored separately, so if
the <nvram> element doesn't contain a path there is really no
useful information inside it.
However, this is about to change, so we will find ourselves
needing to hold on to loader->nvram even when no path is
present. Change the firmware handling code so that such a
scenario is dealt with appropriately.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now we just allocate the object, so the only advantage is
that invocations are shorter and look a bit nicer.
Later on, its introduction will pay off by letting us change
things in a single spot instead of all over the library.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already handle the <nvram> element in a separate helper,
which is cleaner than having all the logic in the top-level
virDomainLoaderDefParseXML() function.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Outline what the function does, especially the return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Changing any of the attributes of an <interface>'s <backend> would
require removing and re-adding the interface for the new setting to
take effect, so fail any update-device that changes anything in
<backend>
Resolves: https://bugzilla.redhat.com/2169245
Signed-off-by: Laine Stump <laine@redhat.com>
It was used briefly and subsequently removed in 3592b81c4c.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Integrated PCI devices can be either PCIe (virtio-iommu) or
conventional PCI (pvpanic-pci). Right now libvirt will refuse
to assign an address on pcie.0 for the latter, but that's an
undesirable limitation that we can easily remove.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainDefAddConsoleCompat in post parsing step appends a stub console
of type VIR_DOMAIN_CHR_TYPE_NULL to ch VMs' Domain XML. Cloud-hypervisor's
deviceValidateCallback (chValidateDomainDeviceDef) checks that the type of
stub console is not of type VIR_DOMAIN_CHR_TYPE_PTY and throws an error.
This commit introduces NO_STUB_CONSOLE feature check to Domain features and
uses it to skip adding stub console to ch VMs.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virDomainDeviceType as type and update all switch statements which
didn't mention all possible values.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the code into a new function named virDomainDeviceDefParseType. The
separation will make it easier to change the type of the 'type' field in
side of virDomainDeviceDef.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the code to use a bitmap with an enum.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This also prevents a potential memleak when multiple elements would be
present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This also prevents a potential memleak when multiple elements would be
present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use the helper designed to find the subelement. A slight semantic
difference after this patch is that the first <zpci> element will be
considered instead of the last, but only one is expected in a valid XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Note that the schema doesn't allow us to represent the two branches of
optional <devnode type='dev'> and zero or more <devnode type='link'>
definitions, so I've merged them under the <zeroOrMore> case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'osxen' RNG type defines options for the <os> element in certain
modes. Allow interleaving of subelements recursively.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow interleave of the top level sub-elements as well as the
subelements in the 'host-certificates' mode. Note that '<interleave>'
doesn't work properly if there's multiple definitions of the same
sub-element in the interleave so for this patch I chose to '<group>' the
'certificate' subelements. Another options would require us to stop
enforcing that there's exactly 3 of them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virDomainNetDef struct has privateData (which is currently
used by QEMU driver to store FDs opened during cmd line building
phase and pass them onto cmd line).
Soon, we will need to store additional information that needs to
survive daemon restart. Let's introduce machinery for parsing and
formatting privateData.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In domain_conf.c there's virDomainChrSourceModeTypeFromString()
which is open coded. Let's rewrite it using VIR_ENUM_DECL() +
VIR_ENUM_IMPL() combo.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While it's true that the virDomainNetVhostuserMode enum is used
solely in virDomainNetDefParseXML(), its placement just above the
function is rather unfortunate. Let's put it at the beginning of
the file with the rest of the enum declarations/implementations.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The <source/> child element of <mac/> is formatted the old way.
Switch to virXMLFormatElement().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For VIR_DOMAIN_NET_TYPE_{SERVER,CLIENT,MCAST,UDP} we need to put
(optionally) 'address' attribute and 'port' attributes of
<source/> element. But the way we currently do that is
particularly verbose. It can be shortened using
virBufferEscapeString().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The <source/> child element of <interface/> is formatted the old
way. Switch to virXMLFormatElement().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The <guest/> child element of <interface/> is formatted the old
way. Switch to virXMLFormatElement(). Since this element is used
in LXC driver, this part of the function is tested by
lxcxml2xmltest (specifically lxc-ethernet* test cases).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The <tune/> child element of <interface/> is formatted the old
way. Switch to virXMLFormatElement().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The @attrBuf variable in virDomainNetDefFormat() is named too
broadly. It holds attribute buffer to the <target/> element.
Rename it to @targetAttrBuf then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
