As of 1a50ba2cb0 we fail to connect to the
monitor instead of getting an exit status != 0 from qemu itself. This
breaks capabilities probing for the non QMP case.
The documentation to this API has some defects from
grammar and wording POV. These were raised after I've
pushed the patches, so they are in a separate commit.
It makes no sense to fail the whole getting command if there is
a parameter unsupported by the kernel. This patch fixes it by
omitting the unsupported parameter for getMemoryParameters.
And for setMemoryParameters, this checks if there is an unsupported
parameter up front of the setting, and just returns failure if not
all parameters are supported.
Replace the following names
* struct qemu_snap_remove with virQEMUSnapRemovePtr
* struct qemu_snap_reparent with virQEMUSnapReparentPtr
* struct qemu_save_header with virQEMUSaveHeaderPtr
* enum qemu_save_formats with virQEMUSaveFormat
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove the obsolete 'qemud' naming prefix and underscore
based type name. Introduce virQEMUDriverPtr as the replacement,
in common with LXC driver naming style
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=879473
The name attribute is required for portgroup elements (yes, the RNG
specifies that), and there is code in libvirt that assumes it is
non-null. Unfortunately, the portgroup parsing function wasn't
checking for lack of portgroup. One adverse result of this was that
attempts to update a network by adding a portgroup with no name would
cause libvirtd to segfault. For example:
virsh net-update default add portgroup "<portgroup default='yes'/>"
This patch causes virNetworkPortGroupParseXML to fail if no name is
specified, thus avoiding any later problems.
Throughout the code, we've always used VIR_DOMAIN_SHUTDOWN* flags
even for virDomainReboot() API and its implementation. Fortunately,
the appropriate macros has the same value. But if we want to keep
things consistent, we should be using the correct macros. This
patch doesn't break anything, luckily.
Commit cb022152 went overboard and introduced a dead conditional
while trying to get rid of a potential NULL dereference.
* src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopReqNew):
Remove redundant conditional.
In a few places, the return value could get passed to VIR_ALLOC_N without
being checked, resulting in a request to allocate a lot of memory if the
return value was negative.
This can't lead to a crash since virNWFilterSnoopReqNew is only called
with a static array as the argument, but if we check for NULL we should
do it right.
Error messages produced while dispatching guest agent commands didn't
have an apparent reference to the fact that they are dealing with guest
agent commands. This patch fixes up some of the messages to contain that
reference.
Just a little rewrite of the cmdDomDisplay function to make it
consistent and hopefully more readable. This also fixes a problem
with password not being displayed for vnc even with the
"--include-password" option.
using qemu guest agent. As said in previous patch,
@mountPoint must be NULL and @flags zero because
qemu guest agent doesn't support these arguments
yet. If qemu learns them, we can start supporting
them as well.
This will call FITRIM within guest. The API has 4 arguments,
however, only 2 will be used for now (@dom and @minumum).
The rest two are there if in future qemu guest agent learns them.
With QMP capability probing, the version was not set.
virsh version returns:
...
Cannot extract running QEMU hypervisor version
This is fixed by computing caps->version from QMP major,
minor, micro values.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
QMP Capability probing will fail if QEMU cannot bind to the
QMP monitor socket in the qemu_driver->libDir directory.
That's because the child process is stripped of all
capabilities and this directory is chown'ed to the configured
QEMU user/group (normally qemu:qemu) by the QEMU driver.
To prevent this from happening, the driver startup will now pass
the QEMU uid and gid down to the capability probing code.
All capability probing invocations of QEMU will be run with
the configured QEMU uid instead of libvirtd's.
Furter, the pid file handling is moved to libvirt, as QEMU
cannot write to the qemu_driver->runDir (root:root). This also
means that the libvirt daemonizing must be used.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
If qemuMonitorOpenUnix is called without a related pid, i.e. for
QMP probing, a connect failure can happen as the result of a race.
Without a pid there is no retry and thus we give up too early.
This changes the code to retry if no pid is supplied.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
we already have virtualize meminfo for container through fuse filesystem,
add function lxcContainerMountProcFuse to mount this meminfo file to
the container's /proc/meminfo.
So we can isolate container's /proc/meminfo from host now.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
with this patch,container's meminfo will be shown based on
containers' mem cgroup.
Right now,it's impossible to virtualize all values in meminfo,
I collect some values such as MemTotal,MemFree,Cached,Active,
Inactive,Active(anon),Inactive(anon),Active(file),Inactive(anon),
Active(file),Inactive(file),Unevictable,SwapTotal,SwapFree.
if I miss something, please let me know.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
because libvirt_lxc's cgroup mountpoint is what it shown
in /proc/self/cgroup.
we can get container's cgroup through virCgroupNew("/", &group),
add interface virCgroupGetAppRoot to help container to
get it's cgroup.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
virCgroupGetMemSwapUsage is used to get container's swap usage,
with this interface,we can get swap usage in fuse filesystem.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
this patch addes fuse support for libvirt lxc.
we can use fuse filesystem to generate sysinfo dynamically,
So we can isolate /proc/meminfo,cpuinfo and so on through
fuse filesystem.
we mount fuse filesystem for every container.
the mount name is libvirt,mount point is
localstatedir/run/libvirt/lxc/containername.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
This bug leads to getting incorrect vcpupin information via
qemudDomainGetVcpuPinInfo() API when the number of maximum
cpu on a host falls into a range such as 31 < ncpus < 64.
gcc warning:
left shift count >= width of type
The following bug is such the case
https://bugzilla.redhat.com/show_bug.cgi?id=876415
Change some legacy function names to use 'qemu' as their
prefix instead of 'qemud' which was a hang over from when
the QEMU driver ran inside a separate daemon
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When starting an LXC guest with a virNetwork based NIC device,
if the network was not active, the virNetworkPtr device would
be leaked
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In virNetDevVethDelete the virRun method will properly report
errors, but when checking the exit status for non-zero exit
code no error is reported
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When starting a container, newDef is initialized to a
copy of 'def', but when startup fails newDef is never
removed. This cause later attempts to use 'virDomainDefine'
to lose the new data being defined.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A mistaken initialization of 'ret' caused failure to create
macvtap devices to be ignored. The libvirt_lxc process
would later fail to start due to missing devices
Also make sure code checks '< 0' and not '!= 0' since only
-1 is considered an error condition
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the <interface> device did not contain any <target>
element, LXC would crash on a NULL pointer if starting
the container failed
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When failing to create a macvlan interface, make sure the
error message contains the name of the host interface
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC driver relies on use of cgroups to kill off LXC processes
in shutdown. If cgroups aren't available, we're unable to kill
off processes, so we must treat lack of cgroups as a fatal startup
error.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code setting up LXC cgroups used an 'rc' variable both
for capturing the return value of methods it calls, and
its own return status. The result was that several failures
in setting up cgroups would actually result in success being
returned.
Use a separate 'ret' for tracking return value as per normal
code design in other parts of libvirt
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The initpid will be required long term to enable LXC to
implement various hotplug operations. Thus it needs to be
persisted in the domain status XML. LXC has not used the
domain status XML before, so this introduces use of the
helpers.
