QEMU_BLOCK_STORAGE_SOURCE_BACKEND_PROPS_SKIP_UNMAP is no longer
referenced inside the code.
QEMU_BLOCK_STORAGE_SOURCE_BACKEND_PROPS_AUTO_READONLY is passed from
various code paths to the qemuBlockStorageSourceGetBackendProps helper,
but it's no longer used.
Both thus can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code was refactored to format the 'read-only' and 'auto-read-only'
flags via the common helper, so the logic determining their values can
be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the qemuBlockStorageSourceAddBlockdevCommonProps helper when
formatting protocol layer both when it's used as backing for a format
node and when it's used as the effective node.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The resulting properties are identical, as the hostdev backend code
doesn't set any of the extra properties.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a mode where the protocol layer -blockdev will be formatted
so that it can be used as the effective node (used to access data from
the device). For this new mode we'll use
qemuBlockStorageSourceAddBlockdevCommonProps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new helper in qemuBlockStorageSourceGetBlockdevStorageSliceProps
to format the common bits.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new helper replaces qemuBlockStorageSourceGetBlockdevFormatCommonProps
and the two inline instances generating the common properties for a
blockdev layer.
The new helper is to be used for both the format layer and the storage
backing layer, thus a new parameter 'effective' switches between the
modes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the same ordering of the relevant fields as we do for the format
layer -blockdev so that later they can be refactored without test
fallout.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the return value type to 'virDomainDiskGetDetectZeroes'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At this point only a single code path (for formatting -drive for legacy
SD cards) uses the 'legacy' output and that code path doesn't populate
the node name. Thus we can unify the code block and simplify the JSON
formatters.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'systemd-analyze security' command looks at the unit file
configuration and reports on any settings which increase the
attack surface for the daemon. Since most systemd units are
fairly minimalist, this is generally informing us about settings
that we never put any thought into using before.
In its current configuration it reports
# systemd-analyze security virtlogd.service
...snip...
→ Overall exposure level for virtlogd.service: 9.6 UNSAFE 😨
which is pretty terrible as a score.
If we apply all of the recommendations that appear possible
without (knowingly) breaking functionality it reports:
# systemd-analyze security virtlogd.service
...snip...
→ Overall exposure level for virtlogd.service: 2.2 OK 🙂
which is a pretty decent improvement.
Some of the settings we would like to enable require a systemd
version that is newer than that available in our oldest distro
target - RHEL-8 at v239.
NB, RestrictSUIDSGID is technically newer than 239, but RHEL-8
backported it, and other distros we target have it by default.
Remaining recommendations are
✗ CapabilityBoundingSet=~CAP_(DAC_*|FOWNER|IPC_OWNER)
We block FOWNER/IPC_OWNER, but can't block the two DAC
capabilities. Historically apps/users might point QEMU
to log files in $HOME, pre-created with their own user
ID.
✗ IPAddressDeny=
Not required since RestrictAddressFamilies blocks IP
usage. Ignoring this avoids the overhead of creating
a traffic filter than will never be used.
✗ NoNewPrivileges=
Highly desirable, but cannot enable it yet, because it
will block the ability to transition to the virtlogd_t
SELinux domain during execve. The SELinux policy needs
fixing to permit this transition under NNP first.
✗ PrivateTmp=
There is a decent chance people have VMs configured
with a serial port logfile pointing at /tmp. We would
cause a regression to use private /tmp for logging
✗ PrivateUsers=
This would put virtlogd inside a user namespace where
its root is in fact unprivileged. Same problem as the
User= setting below
✗ ProcSubset=
Libraries we link to might read certain non-PID related
files from /proc
✗ ProtectClock=
Requires v245
✗ ProtectHome=
Same problem as PrivateTmp=. There's a decent chance
that someone has a VM configured to write a logfile
to /home
✗ ProtectHostname=
Requires v241
✗ ProtectKernelLogs
Requires v244
✗ ProtectProc
Requires v247
✗ ProtectSystem=
We only set it to 'full', as 'strict' is not viable for
our required usage
✗ RootDirectory=/RootImage=
We are not capable of running inside a custom chroot
given needs to write log files to arbitrary places
✗ RestrictAddressFamilies=~AF_UNIX
We need AF_UNIX to communicate with other libvirt daemons
✗ SystemCallFilter=~@resources
We link to libvirt.so which links to libnuma.so which has
a constructor that calls set_mempolicy. This is highly
undesirable todo during a constructor.
✗ User=/DynamicUser=
This is highly desirable, but we currently read/write
logs as root, and directories we're told to write into
could be anywhere. So using a non-root user would have
a major risk of regressions for applications and also
have upgrade implications
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Setup the VDPA bits of the appropriate part of the image chain for block
copy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code which opens the VDPA device and prepares it for FD passing was
not called in the hotplug code path, preventing hotplug of VDPA disks
with:
error: internal error: argument key 'path' must not have null value
Use the new helper qemuProcessPrepareHostStorageDisk to setup the VDPA
definition.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/539
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently the code sets up only VDPA backends but will be used later in
hotplug code too.
This patch also uses normal forward iteration in the loop in
qemuProcessPrepareHostStorage as we don't need to remove disks from the
disk list at that point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Given that this variable now controls not just whether C tests
are built, but also whether any test at all is executed, the new
name is more appropriate.
Update the description for the corresponding meson option
accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently, passing -Dtests=disabled only disables a subset of
tests: those that are written in C and thus require compilation.
Other tests, such as the syntax-check ones and those that are
implemented as scripts, are always enabled.
There's a potentially dangerous consequence of this behavior:
when tests are disabled, 'meson test' will succeed as if they
had been enabled. No indication of this will be shown, so the
user will likely make the reasonable assumption that everything
is fine when in fact the significantly reduced coverage might
be hiding failures.
To solve this issues, disable *all* tests when asked to do so,
and inject an intentionally failing test to ensure that 'meson
test' doesn't succeed.
Best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Return whether a relevant cachemode was presented rather than returning
an error, so that callers can be simplified. Use the proper enum type as
argument rather than typecasting in the switch statement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aforementioned fields in virStorageSource struct are copies of the
disk properties, but were not converted to the proper type yet.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Certain disk config fields are mirrored between the disk and storage
source definitions, but the proper types are not available for use in
the virStorageSource definition. Move them so they can be used properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Formatting of the 'nbdkit' driven backend breaks out of the switch
statement so we don't need to have an unnecessary block and indentation
level for the case when nbdkit is not in use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuBuildDriveSourceStr' used to build the legacy -drive commandline
for SD cards is the only user of qemuDiskSourceGetProps. Move the helper
directly inline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'auto-read-only' blockdev option is available in all supported qemu
versions so we can remove the migration hack which disabled it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want at least one file to always be present, so that it can
serve as a pointer for users. Ensure that this is the case by
unconditionally using the value of the respective keys.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's somewhat confusing that some of the services have a
corresponding foo.service.extra.in and foo.socket.extra.in, some
have just one of the two, and some have neither.
In order to make things more approachable, make sure that both
files exists for each service.
In most cases the extra units are currently unused, so they will
just contain a comment briefly explaining their purpose and
pointing users to meson.build, where they can find more
information. The same comment is also added to the top of
extra units that already have some contents in them for
consistency.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the underlying script is able to merge an arbitrary
number of units into the base template, expose this possibility
in the build system.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It uses custom templates which already hardcode the correct
value.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Starting v18, cloud-hypervisor supports serial and console devices in
parallel. Drop related check based on ch version.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Starting with v28.0 cloud-hypervisor requires the use of "payload" api to pass
kernel, initramfs and cmdline options. Extend ch driver to use the new
api based on ch version.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function virHostCPUGetPhysAddrSize was introduced with commit be1b7d5b18
fails on architectures other than x86 and SuperH. The commit 8417c1394c
fixed the issue only for s390 but the problem is still seen on other
architectures like ppc which does not report Physical address size in their
cpuinfo output.
command:
systemctl restart libvirtd.service
Output :
<snip>
dnsmasq[2377]: read /var/lib/libvirt/dnsmasq/default.addnhosts - 0
addresses
dnsmasq-dhcp[2377]: read /var/lib/libvirt/dnsmasq/default.hostsfile
libvirtd[3163]: libvirt version: 9.8.0
libvirtd[3163]: hostname: xxxxxxxxxx
libvirtd[3163]: internal error: Missing or invalid CPU address size in
/proc/cpuinfo
libvirtd.service: Deactivated successfully.
</snip>
This patch fixes this issue by returning the size=0 for architectures
other than x86 and SuperH.
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
vmDef->fss[i]->src->path may be NULL,
so check is needed before passing it to VIR_DEBUG.
Also removed checking vmDef->fss[i]->src for NULL, since it may not be NULL.
Fixes: 57487085dc ("lxc: don't try to reference NULL when mounting filesystems")
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, libvirt doesn't send events when devices are attached,
detached or updated. Thus, any services that listen to events are
unaware of the change to persistent config.
Signed-off-by: Fima Shevrin <efim.shevrin@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Considering that at the virSecuritySELinuxSetFilecon() function can only
return 0 or -1 and so does the virSecuritySELinuxFSetFilecon(), the check
for '1' at the end of virSecuritySELinuxSetImageLabelInternal() is
effectively a dead code. Drop it.
Co-developed-by: sdl.qemu <sdl.qemu@linuxtesting.org>
Signed-off-by: Sergey Mironov <mironov@fintech.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While the name itself doesn't matter, this rename is done to prove that
all places using 'nodeformat' were converted to the appropriate
accessors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The persistent bitmaps are stored in the format layer, using 'effective'
bitmap name is the most reasonable approach in this case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The blockjob, NBD export and setup of the cookie data all care about the
effective nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The frontend device needs to access the blocks directly so it cares
about the effective nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In most cases the bitmap operations are relevant only on qcow2 images
thus the 'format' layer will be present. Although in certain specific
cases temporary bitmaps can be created on top of other images as well,
thus we use the 'effective' bitmap name in all cases for bitmap
operations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I case of statistics we're interested in the statistics of the effective
bitmap whatever it happens to be.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The disk backend setup code is concerned only about the effective
nodename. Doing this conversion will also simplify further changes
needed to drop the 'raw' layer in cases when it's not really needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code setting the nodenames needs to use the 'true' nodename of the
format layer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the main -blockdev JSON object setup code to use the new
accessors. In these we use mainly the real 'format' layer node name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the effective nodename for naming the job as we use that one now.
It doesn't matter too much which one we pick, because it's used just for
the name of the job, which we preserve in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both modified cases in this patch require the effective nodename as they
deal with the data being backed up.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a set of accessors, which return node names based on
semantics. This will allow to us to modify how we setup the backing
chain in cases when e.g. the format driver can be omitted, without
breaking all the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the name itself doesn't matter, this rename is done to prove that
all places using 'nodestorage' were converted to the appropriate
accessors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to keep setting the block threshold on the real storage layer
per semantics of the API. Use the appropriate accessor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In all cases we want to probe stats from the 'storage' layer as we're
interested in the 'threshold' value, which we set there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new nodename accessors for any storage layer helper object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the code settin up data structures used to attach/detach disks
and SCSI hostdevs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the code which assigns the 'storage' layer nodenames for disks.
scsi hostdevs and pflash backend.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to use the 'effective' storage nodename (one which includes the
optional storage slice 'raw' intermediate layer) in the code which
formats the 'format' layer props.
All other cases need the real storage driver nodename as they either
generate the 'storage' layer props, or the storage slice, which refers
to the proper storage backend.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new accessors in the private XML formatters and parsers and the
recovery code.
Specifically in all instances we use the proper (not effective) storage
nodename. In the virStorageSource private data it is what we need to
store. In blockjobs status XML it simply serves us to find the
appropriate 'virStorageSource' struct so using the storage layer node
name is simpler.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'qemuBlockStorageSourceGetEffectiveStorageNodename' in all the JSON
props formatters for setting up a 'blockdev-create' job of a format
layer.
In case of the blockjob name designator we're okay to use just the
storage layer nodename as that serves only to find the appropriate
entry.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The lookup by nodename requires the proper storage nodename which we use
also in status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a set of accessors, which return node names based on
semantics. This will allow to us to modify how we setup the backing
chain in cases when e.g. the format driver can be omitted, without
breaking all the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuBlockStorageSourceGetFormatProps as it formats the properties of
the 'format' driver in qemu. Adjust the comment which was hinting
otherwise.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Restructure the conditions so that we can use virJSONValueObjectAdd with
a clearer logic for backing store control.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the node name of the storage access driver to identify the block job
volumes. This will prepare the blockjob code for the possibility that the
format layer may be missing. Our lookup code can find either of them,
thus we can safely switch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'virt-aa-helper' process gets a XML of the VM it needs to create a
profile for. For a disk type='volume' this XML contained only the
pool and volume name.
The 'virt-aa-helper' needs a local path though for anything it needs to
label. This means that we'd either need to invoke connection to the
storage driver and re-resolve the volume. Alternative which makes more
sense is to pass the proper data in the XML already passed to it via the
new XML formatter and parser flags.
This was indirectly reported upstream in
https://gitlab.com/libvirt/libvirt/-/issues/546
The configuration in the issue above was created by Cockpit on Debian.
Since Cockpit is getting more popular it's more likely that users will
be impacted by this problem.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Re-translating the disk source pools when reconnecting to a VM makes no
sense as the volume might have changed or pool became inactive. The VM
still uses the original volume though. Failing to re-translate the pool
also causes the VM to be killed.
Fix this by storing the original translation in the status XML.
Resolves: https://issues.redhat.com/browse/RHEL-7345
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Re-translating a disk type='volume' definition from a storage pool is
not a good idea in cases when the volume might have changed or we might
not have access to the storage driver.
Specific cases are if a storage pool is not activated on daemon restart,
then re-connecting to a VM fails, or if the virt-aa-helper program tries
to setup labelling for apparmor.
Add a new flag which will preserve the translated data in the
definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a disk definition was already translated re-doing it makes no sense.
Skip the translation if the 'actualtype' is already populated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Register autoptr cleanup function for virStorageSourcePoolDef and
refactor the parser to simplify the logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use proper enum type and refactor the formatter accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When loading a secret value fails, the control jumps over to the
'cleanup' label where explicit call to virSecretDefFree()
happens. This is unnecessary as the corresponding variable can be
declared with g_autoptr() after which all error paths can just
return NULL instantly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When loading virSecret configs, the @path variable holds path to
individual config files. In each iteration it is freed explicitly
using VIR_FREE(). Switch it to g_autofree and remove those
explicit calls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanup the virBuildPathInternal() function is no
longer used. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our virBuildPath() constructs a path from given arguments.
Exactly like g_build_filename(), except the latter is more
generic as it uses backslashes on Windows. Therefore, replace the
former with the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In my recent commit of v9.8.0-rc1~7 I've introduced validation
wrt other memory devices. And mostly works, except when doing
memory device update ('virsh update-memory-device') because then
@mem is just parsed <memory/> device XML and thus its pointer is
not in the vm->def->mem, yet. Thus my algorithm which skips over
the same entry fails. Fortunately, we require full device XML on
device update and thus we can use device address and aliases to
detect duplicity.
Fixes: 3fd64fb0e2
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While qemu is still reporting the 'device' field in the tray even the
code was not ready for the possibility of it missing. Fix the condition
for clearing 'devAlias' if qemu doesn't report the 'device' field.
Signed-off-by: Sergey Mironov <mironov@fintech.ru>
Comparison "if (ret == -1)" is always false.
This statement was forgotten during switching to g_new0()
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0275b06a55 ("util: command: use g_new0")
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Now that deleting and reverting external snapshots is implemented we can
report that in capabilities so management applications can use that
information and start using external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Original code assumed that the memory state file is only migration
stream but it has additional metadata stored by libvirt. To correctly
load the memory state file we need to reuse code that is used when
restoring domain from saved image.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We need to skip all disks that have snapshot type other than 'external'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When used with internal snapshots there is no memory state file so we
have no data to load and decompression is not needed.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When called from snapshot code we will need to pass snapshot object in
order to make internal snapshots work correctly.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When called by snapshot code we will need to use different reason.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The function will no longer be used only when restoring VM as it will
be used when reverting snapshot as well so move it to qemu_process
and rename it accordingly.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These new helpers separates the code from the logic used to start new
QEMU process with memory state and will make it easier to move
qemuSaveImageStartProcess() into qemu_process.c file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Part of qemuSaveImageStartVM() function will be used when reverting
external snapshots. To avoid duplicating code and logic extract the
shared bits into separate function.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently, nbdkit support will automatically be enabled as long as
the pidfd_open(2) syscall is available. Optionally, libnbd is used
to generate more user-friendly error messages.
In theory this is all good, since use of nbdkit is supposed to be
transparent to the user. In practice, however, there is a problem:
if support for it is enabled at build time and the necessary
runtime components are installed, nbdkit will always be preferred,
with no way for the user to opt out.
This will arguably be fine in the long run, but right now none of
the platforms that we target ships with a SELinux policy that
allows libvirt to launch nbdkit, and the AppArmor policy that we
maintain ourselves hasn't been updated either.
So, in practice, as of today having nbdkit installed on the host
makes network disks completely unusable unless you're willing to
compromise the overall security of the system by disabling
SELinux/AppArmor.
In order to make the transition smoother, provide a convenient
way for users and distro packagers to disable nbdkit support at
compile time until SELinux and AppArmor are ready.
In the process, detection is completely overhauled. libnbd is
made mandatory when nbdkit support is enabled, since availability
across operating systems is comparable and offering users the
option to make error messages worse doesn't make a lot of sense;
we also make sure that an explicit request from the user to
enable/disable nbdkit support is either complied with, or results
in a build failure when that's not possible. Last but not least,
we avoid linking against libnbd when nbdkit support is disabled.
At the RPM level, we disable the feature when building against
anything older than Fedora 40, which still doesn't have the
necessary SELinux bits but will hopefully gain them by the time
it's released. We also allow nbdkit support to be disabled at
build time the same way as other optional features, that is, by
passing "--define '_without_nbdkit 1'" to rpmbuild. Finally, if
nbdkit support has been disabled, installing libvirt will no
longer drag it in as a (weak) dependency.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Wrap the macro body in a new block and move the declaration of 'tmp'
into it, to avoid the need to mix g_autofree with manual freeing.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The function is supposed to return the number of items filled into the
array and not zero. Also change the initialization of the "randomness"
to be based on the startCell so that the values are different for each
cell even for separate calls.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 208569b07b6479e0acd05c5a7e1978b0b641e188)
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virProcessKillPainfullyDelay() currently almost always returns 1 or -1,
even though the documentation indicates that it should return 0 if the
process was terminated gracefully. But the computation of the return
code is faulty and the only case where it currently returns 0 is when it
is called with the pid of a process that does not exist.
Since no callers ever even distinguish between the 0 and 1 response
codes, simply get rid of the distinction and return 0 for both cases.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Like the Description, these are intended to be displayed to the
user, so it makes sense to have them towards the top of the file
before all the information that systemd will parse to calculate
dependencies.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Hypervisors are referred to by their user-facing name rather
than the name of their libvirt driver, the monolithic daemon is
explicitly referred to as legacy, and a consistent format is
used throughout.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we only set this for the main sockets, which means
that
$ systemctl stop virtqemud.socket
will make the socket disappear from the filesystem while
$ systemctl stop virtqemud-ro.socket
won't. Get rid of this inconsistency.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This results in all sockets for a service being enabled when a
single one of them is.
The -tcp and -tls sockets are intentionally excluded, because
enabling them should require explicit action on the
administrator's part; moreover, disabling them should not result
in the local sockets being disabled too.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
systemd will automatically infer this dependency based on the
socket's Service=foo.service setting.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>