Keeping the list of build dependencies sorted alphabetically
makes it way easier to visually scan it for issues.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1439991
Whenever a device is being updated via
virDomainUpdateDeviceFlags() API, we parse the device XML and
ideally run some generic checks to validate the configuration
(e.g. if device defines per-device boot order but the domain has
os/boot element already). Well, that's the theory - due to a
missing check we've jumped early from that check function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
After b4f7793ce2, qemuxml2xmltest has apparently become big enough
to trigger a compilation error when using --enable-test-coverage on
aarch64:
CC qemuxml2xmltest.o
qemuxml2xmltest.c: In function 'mymain':
qemuxml2xmltest.c:1216:1: error: const/copy propagation disabled: 4361 basic blocks and 99285 registers [-Werror=disabled-optimization]
}
^
qemuxml2xmltest.c:1216:1: error: PRE disabled: 4361 basic blocks and 99285 registers [-Werror=disabled-optimization]
qemuxml2xmltest.c:1216:1: error: const/copy propagation disabled: 4361 basic blocks and 99285 registers [-Werror=disabled-optimization]
qemuxml2xmltest.c:1216:1: error: const/copy propagation disabled: 4361 basic blocks and 99285 registers [-Werror=disabled-optimization]
However, as the GCC documentation states, this warning is not really
caused by issues in our code, so it makes sense to disable it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Neither @cfg nor (now) @driver is used in the API, so remove them
and mark @opaque as UNUSED.
NB: Commit id 'fa3c558596' dropped the unused @qemuCaps which was the
last consumer of @driver other than @cfg, but even @cfg was never used
even in the original implementation from commit id 'd987f63a'.
arm/aarch64 -M virt on KVM doesn't and will never work with standard
VGA card emulation. The recommended method is to use type=virtio, so
let's make it the default for video devices without an explicit type
set by the user.
https://bugzilla.redhat.com/show_bug.cgi?id=1404112
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This allows drivers to set their own default. But if a driver neglects
to fill one in, we still error like we previously would at parse time.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Will be needed for future patches to pull the default video type
setting out of XML parsing routines.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
There were a few places in our code where the following pattern in 'if'
condition occurred:
if ((foo = bar() < 0))
do something;
This patch adjusts the conditions to the expected format:
if ((foo = bar()) < 0)
do something;
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1488192
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
According to the comments in the file and the git history, the
list of forbidden symbols was originally built against Fedora 9
in 2009 (!) and pretty much never refreshed afterwards.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Suggested-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Although not previously explicitly documented, the expectation for
the libvirt event loop is that an implementation is registered early
in application startup, before calling any libvirt APIs and then
run forever after. Replacing a previously registered event loop is
not safe & subject to races even if virConnectClose has been called
on open handles, due to delayed deregistration of callbacks during
conenction close.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libxslt package is needed since:
commit 94d2d6429d
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jul 26 17:40:44 2017 +0100
docs: make xmllint & xsltproc compulsory
The native RPM had it already, but mingw build was missing it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Funny thing. So when initializing LXC driver's capabilities,
firstly the virLXCDriverGetCapabilities() is called. This creates
new capabilities, stores them under driver->caps, ref() them and
return them. However, the return value is ignored. Secondly, the
function is called yet again and since we have driver->caps set,
they are ref()-ed again an returned. So in the end, driver's
capabilities have refcount of three when in fact they should have
refcount of one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If you use the VDDK library to access virtual machines remotely, you
really need to know the Managed Object Reference ("moref") of the VM.
This must be passed each time you connect to the API.
For example nbdkit's VDDK plugin requires a moref to be passed to
mount up a VM's disk remotely:
nbdkit vddk user=root password=+/tmp/rootpw \
server=esxi.example.com thumbprint=xx:xx:xx:... \
vm=moref=2 \
file="[datastore1] Fedora/Fedora.vmdk"
Getting the moref is a huge pain. To get some idea of what it is, why
it is needed, and how much trouble it is to get it, see:
https://blogs.vmware.com/vsphere/2012/02/uniquely-identifying-virtual-machines-in-vsphere-and-vcloud-part-1-overview.htmlhttps://blogs.vmware.com/vsphere/2012/02/uniquely-identifying-virtual-machines-in-vsphere-and-vcloud-part-2-technical.html
However the moref is available conveniently in the internals of the
libvirt VMX driver. This patch exposes it as a custom XML element
using the same "vmware:" namespace which was previously used for the
datacenterpath (see libvirt commit 636a990587).
It appears in the XML like this:
<domain type='vmware' xmlns:vmware='http://libvirt.org/schemas/domain/vmware/1.0'>
<name>Fedora</name>
...
<vmware:datacenterpath>ha-datacenter</vmware:datacenterpath>
<vmware:moref>2</vmware:moref>
</domain>
Note that the moref can appear as either a simple ID (for esx://
connections) or as a "vm-<ID>" (for vpx:// connections). It should be
treated by users as an opaque string.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
commit '96e55048' caused make check failure for virschematest:
1929) Checking ../docs/news.xml against ../news.rng ... libvirt: XML Util error : XML document failed to validate against schema: Unable to validate doc against /home/jferlan/git/libvirt.work/docs/schemas/../news.rng
Datatype element summary has child elements
Element summary failed to validate content
Datatype element summary has child elements
Element summary failed to validate content
^[[31m^[[1mFAILED^[[0m
That's because <code> elements don't appear to be allowed in the schema.
Rather than attempt to fix the schema, figured it was simpler to just
remove them and let the schema fix happen later.
Documents some changes that have slipped through the cracks
during the development cycle.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch documents support for managedsave-dumpxml,
managedsave-define and managedsave-edit commands.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1487322
In ace45e67ab I tried to fix a problem that we get the reply to
a D-Bus call while we were sleeping. In that case the callback
was never set. So I changed the code that the callback is called
directly in this case. However, I hadn't realized that since the
callback is called out of order it locks the virNetDaemon.
Exactly the very same virNetDaemon object that we are dealing
with right now and that we have locked already (in
virNetDaemonAddShutdownInhibition())
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We call qemuDomainGetMachineName on domain start. On first
start (after daemon start) pid is 0 and virSystemdGetMachineNameByPID
don't get called. But after domain shutting down pid became -1 so
on next start virSystemdGetMachineNameByPID is called and returned an error.
Error is ignored so it is not critical. But at least on my system
(systemd-219 with extra patches) systemd-machined is crashed on
this request.
This behaviour is triggered by eaf2c9f89.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1484230
When updating a virtio enabled vNIC and trying to change either
of rx_queue_size or tx_queue_size success is reported although no
operation is actually performed. Moreover, there's no way how to
change these on the fly. This is due to way we check for changes:
explicitly for each struct member. Therefore it's easy to miss
one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1437797
Rather than using refreshVol which essentially only updates the
allocation, capacity, and permissions for the volume, but not
the format which does get updated in a pool refresh - let's use
the same helper that pool refresh uses in order to update the
volume target.
Currently while parsing domain XML we clear the UNIX path if it matches
one of the auto-generated paths by libvirt. After that when the guest
is started new path is generated but the mode is also changed to "bind".
In the real-world use-case the mode should not change, it only happens
if a user provides a mode='connect' and path that matches one of the
auto-generated path or not provides a path at all.
Before *reconnect* feature was introduced there was no issue, but with
the new feature we need to make sure that it's used only with "connect"
mode, therefore we need to move the mode change into parsing in order
to have a proper error reported by validation code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The test was introduced by 60135b22db.
The auto-generated path is removed by post-parse callback which
also changes the mode from "connect" to "bind" since the auto-generated
path makes sense only for "bind" mode.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
With gnutls 3.6.0, SHA1 is no longer accepted for certificate
signatures. We must usw SHA256 instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit e4cb850081 changed the way ssh command line is created by
adding '--' before the hostname in order to fix a potential security
flaw. However it failed to modify the tests, so let's do that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Inspired by the recent GIT / Mercurial security flaws
(http://blog.recurity-labs.com/2017-08-10/scm-vulns),
consider someone/something manages to feed libvirt a bogus
URI such as:
virsh -c qemu+ssh://-oProxyCommand=gnome-calculator/system
In this case, the hosname "-oProxyCommand=gnome-calculator"
will get interpreted as an argument to ssh, not a hostname.
Fortunately, due to the set of args we have following the
hostname, SSH will then interpret our bit of shell script
that runs 'nc' on the remote host as a cipher name, which is
clearly invalid. This makes ssh exit during argv parsing and
so it never tries to run gnome-calculator.
We are lucky this time, but lets be more paranoid, by using
'--' to explicitly tell SSH when it has finished seeing
command line options. This forces it to interpret
"-oProxyCommand=gnome-calculator" as a hostname, and thus
see a fail from hostname lookup.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When recreating folders with namespaces, the directory type was not
being handled at all. It's not special, we probably just didn't know
that that can be used as a volume path as well. The code failed
gracefully, but we want to allow that so that we can use <disk
type='dir'> in domains again.
Partially-resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1443434
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Our backing probing code handles directory file types properly in
virStorageFileGetMetadataRecurse(), by that I mean it leaves them
alone. However its caller, the virStorageFileGetMetadata() resets the
type to raw before probing, without even checking the type. We need
to special-case TYPE_DIR in order to achieve desired results.
Also, in order to properly test this, we need to stop resetting format
of volumes in tests for TYPE_DIR (probably the reason why we didn't
catch that and why the test data didn't need to be modified).
Partially-resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1443434
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This commit adds qemu driver implementation to edit xml
configuration of managed save state file of a domain.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
This commit adds qemu driver implementation to get xml description
for managed save state domain.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
Similar to domainSaveImageDefineXML this commit adds domainManagedSaveDefineXML
API which allows to edit domain's managed save state xml configuration.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
Similar to domainSaveImageGetXMLDesc this commit adds domainManagedSaveGetXMLDesc
API which allows to get the xml of managed save state domain.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1476866
For some reason, we completely ignore <on_reboot/> setting for
domains. The implementation is simply not there. It never was.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This API is definitely modifying state of @vm. Therefore it
should grab a job.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
At some places we either already have synchronous job or we just
released it. Also, some APIs might want to use this code without
having to release their job. Anyway, the job acquire code is
moved out to qemuDomainRemoveInactiveJob so that
qemuDomainRemoveInactive does just what it promises.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
