Trying to delete the non-existent TLS objects results in ugly error
messages in the log, which could easily confuse users. Let's avoid this
confusion by not trying to delete the objects if we were not asked to
enable TLS migration and thus we didn't created the objects anyway.
This patch restores the behavior to the state before "qemu: Reset all
migration parameters".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We store the flags passed to the API which started the migration. Let's
use them instead of a separate bool to check if post-copy migration was
requested.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When an async job is running, we sometimes need to know how it was
started to distinguish between several types of the job, e.g., post-copy
vs. normal migration. So far we added a specific bool item to
qemuDomainJobObj for such cases, which doesn't scale very well and
storing such bools in status XML would be painful so we didn't do it.
A better approach is to store the flags passed to the API which started
the async job, which can be easily stored in status XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When an always-on migration capability is supposed to be enabled on both
sides of migration, each side can only enable the feature if it is
enabled by the other side.
Thus the source host sends a list of supported migration capabilities in
the migration cookie generated in the Begin phase. The destination host
consumes the list in the Prepare phase and decides what capabilities can
be enabled when starting a QEMU process for incoming migration. Once
done the destination sends the list of supported capabilities back to
the source where it is used during the Perform phase to determine what
capabilities can be automatically enabled.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some migration capabilities may be enabled automatically, but only if
both sides of migration support them. Thus we need to be able transfer
the list of supported migration capabilities in migration cookie.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since every parameter or capability set in qemuMigrationCompression
structure is now reflected in qemuMigrationParams structure, we can
replace qemuMigrationAnyCompressionDump with a new API which will work
on qemuMigrationParams.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to call this API explicitly in the migration code. We
can pass the compression parameters to qemuMigrationParamsFromFlags and
it can internally call qemuMigrationParamsSetCompression to apply them
to the qemuMigrationParams structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Propagate the calls up the stack to the point where
qemuMigrationParamsFromFlags is called. The end goal achieved in the
following few patches is to merge compression parameters into the
general migration parameters code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most migration capabilities are directly connected with
virDomainMigrateFlags so qemuMigrationParamsFromFlags can automatically
enable them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some migration capabilities are always enabled if QEMU supports them. We
can just drop the explicit code for them and let
qemuMigrationParamsCheck automatically set such capabilities.
QEMU_MONITOR_MIGRATION_CAPS_EVENTS would normally be one of the always
on features, but it is the only feature we want to enable even for other
jobs which internally use migration (such as save and snapshot). Hence
this capability is set very early after libvirtd connects to QEMU
monitor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's just a tiny wrapper around qemuMigrationParamsSetCapability and
setting priv->job.postcopyEnabled is not something qemuMigrationParams
code should be doing anyway so let the callers do it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every migration entry point in qemu_driver is supposed to call
qemuMigrationParamsFromFlags to transform flags and parameters into
qemuMigrationParams structure and pass the result to qemuMigration*
APIs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of checking each capability at the time we want to set it in
qemuMigrationParamsSetCapability we can check all of them at once in
qemuMigrationParamsCheck.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We reached the point when qemuMigrationParamsApply is the only API which
sends migration parameters and capabilities to QEMU. Thus all but the
TLS parameters can be set before we ask QEMU for the current values of
all parameters in qemuMigrationParamsCheck.
Supported migration capabilities are queried as soon as libvirt connects
to QEMU monitor so we can check them anytime.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We reached the point when qemuMigrationParamsApply is the only API which
sends migration parameters and capabilities to QEMU. Thus all but the
TLS parameters can be set before we ask QEMU for the current values of
all parameters in qemuMigrationParamsCheck.
Supported migration capabilities are queried as soon as libvirt connects
to QEMU monitor so we can check them anytime.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prefer xbzrle-cache-size migration parameter over the special
migrate-set-cache-size QMP command.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Migration capabilities are closely related to migration parameters and
it makes sense to keep them in a single data structure. Similarly to
migration parameters the capabilities are all send to QEMU at once in
qemuMigrationParamsApply, all other APIs operate on the
qemuMigrationParams structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new name is qemuMigrationParamsApply and it will soon become the
only API which will send all requested migration parameters and
capabilities to QEMU. All other qemuMigrationParams* APIs will just
operate on the qemuMigrationParams structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no real reason for qemuMigrationParamsEnableTLS to require the
callers to pass a valid virQEMUDriverConfigPtr, it can just call
virQEMUDriverGetConfig.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function checks whether QEMU supports TLS migration and stores the
original value of tls-creds parameter to priv->migTLSAlias. This is no
longer needed because we already have the original value stored in
priv->migParams.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code can be merged directly in qemuMigrationParamsAddTLSObjects.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Restore the original values of all migration parameters we store in
qemuDomainJobObj instead of explicitly resting only a limited set of
them.
The result is not strictly equivalent to the previous code wrt reseting
TLS state because the previous code would only reset it if we changed it
before while the new code will reset it always if QEMU supports TLS
migration. This is not a problem for the parameters themselves, but it
can cause spurious errors about missing TLS objects being logged at the
end of non-TLS migration. This issue will be fixed ~50 patches later.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Any job which touches migration parameters will first store their
original values (i.e., QEMU defaults) to qemuDomainJobObj to make it
easier to reset them back once the job finishes.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When connection to the client which controls a non-p2p migration gets
closed between Perform and Confirm phase, we don't know whether the
domain was successfully migrated or not. Thus, we have to leave the
domain paused and just cleanup the migration job and reset migration
parameters.
Previously we didn't reset the parameters and future save or snapshot
operations would see wrong environment (and could fail because of it) in
case the domain stayed running on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently migration parameters are stored in a structure which mimics
the QEMU migration parameters handled by query-migrate-parameters and
migrate-set-parameters. The new structure will become a libvirt's
abstraction on top of QEMU migration parameters, capabilities, and
related stuff.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It will get a bit more complicated soon and storing it on a stack with
{0} initializer will no longer work. We need a proper constructor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is connected with the code which handles migration
parameters and capabilities, let's move it to qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the end, this will allow us to have most of the logic around
migration parameters and capabilities done in one place.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is now called qemuMigrationParamsFromFlags to better
reflect what it is doing: taking migration flags and params and
producing a struct with QEMU migration parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since virCloseCallbacksRun was ignoring the value anyway, let's
just change it to be a void function.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
In qemuMigrationSrcRun, we already checked for non-NULL mig
and then dereferenced it. It's only possible for mig to be
NULL in the error section.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This partially reverts 82592551cb8c4112cfa2264d50b8dce5349533d5.
When migrating a domain, qemuMigrationDstPrepareAny() is called
which eventually calls qemuProcessLaunch(conn = NULL, flags =
VIR_QEMU_PROCESS_START_AUTODESTROY); But the very first thing
that qemuProcessLaunch does is check if AUTODESTROY flag is set
and @conn is not NULL. Well, it is.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1494454
If a domain disk is stored on local filesystem (e.g. ext4) but is
not being migrated it is very likely that domain is not able to
run on destination. Regardless of share/cache mode.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Range check in virPortAllocatorSetUsed is not useful anymore
when we manage ports for entire unsigned short range values.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Ensure all enum cases are listed in switch statements, or cast away
enum type in places where we don't wish to cover all cases.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is very difficult while reading the migration code trying to
understand whether a particular function is being called on the src side
or the dst side, or either. Putting "Src" or "Dst" in the method names will
make this much more obvious. "Any" is used in a few helpers which can be
called from both sides.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
These APIs are not required anywhere outside the migration code so need
not be exported to the rest of the QEMU driver.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The qemuMigrationPrecreateStorage method needs a connection
to access the storage driver. Instead of passing it around,
open it at time of use.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When setting up graphics, we sometimes need to resolve networks,
requiring the caller to pass in a virConnectPtr, except sometimes they
pass in NULL. Use virGetConnectNetwork() to acquire the connection to
the network driver when it is needed.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
During domain startup there are many places where we need to acquire
secrets. Currently code passes around a virConnectPtr, except in the
places where we pass in NULL. So there are a few codepaths where ability
to start guests using secrets will fail. Change to acquire a handle to
the secret driver when needed.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is a long standing hack to pass a virConnectPtr into the
qemuMonitorStartCPUs method, so that when the text monitor prompts
for a disk password, we can lookup virSecretPtr objects. This causes
us to have to pass a virConnectPtr around through countless methods
up the call chain....except some places don't have any virConnectPtr
available so have always just passed NULL. We can finally fix this
disastrous design by using virGetConnectSecret() to open a connection
to the secret driver at time of use.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Loadable drivers must never depend on each other. Over time some usage
mistakenly crept in for the storage and network drivers, but now this is
eliminated the syntax-check rules can enforce this separation once more.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The storagePoolLookupByTargetPath() method in the storage driver is used
by the QEMU driver during block migration. If there's a valid use case
for this in the QEMU driver, then external apps likely have similar
needs. Exposing it in the public API removes the direct dependancy from
the QEMU driver to the storage driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the stats field in _qemuDomainJobInfo to be a union. This
will allow for the collection of various different types of stats
in the same field.
When starting the async job that will end up being used for stats,
set the @statsType value appropriately. The @mirrorStats are
special and are used with stats.mig in order to generate the
returned job stats for a migration.
Using the NONE should avoid the possibility that some random
async job would try to return stats for migration even though
a migration is not in progress.
For now a migration and a save job will use the same statsType
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In my first approach in 4b480d10768c I overlooked the comment in
qemuMigrationRunIncoming stating that during actual migration the
qemuMigrationRunIncoming does not wait until the migration is complete
but rather offloads that to the Finish phase of migration.
This means that during actual migration qemuProcessRefreshState was
called prior to qemu actually transferring the full state and thus the
queries did not get the correct information. The approach worked only
for restore, where we wait for the migration to finish during qemu
startup.
Fix the issue by calling qemuProcessRefreshState both from
qemuProcessStart if there's no incomming migration and from
qemuMigrationFinish so that the code actually works as expected.
