qemuxml2argv test suite is way more comprehensive than the hotplug
suite. Since we share the code paths for monitor and command line
hotplug we can easily test the properties of devices against the QAPI
schema.
To achieve this we'll need to skip the JSON->commandline conversion for
the test run so that we can analyze the pure properties. This patch adds
flags for the comand line generator and hook them into the
JSON->commandline convertor for -netdev. An upcoming patch will make use
of this new infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that all code paths generate JSON props we can remove the conversion
to command line arguments and back in the monitor code.
Note that the test which is removed in this commit will be replaced by a
stronger testsuite later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There are multiple steps of setting up the domain definition prior to
formatting the command line for the tests. Extract it to a separate
function so that it's self-contained and also will allow re-running the
command line formatting which will be necessary for QMP schema
validation tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In some cases we use 'on/off' for command line arguments. Add a switch
which will select the preferred spelling for a specific usage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow reusing this for formatting of netdev_add arguments into -netdev.
We need to be able to skip the 'type' property as it's used without the
prefix by our generator.
Add infrastructure which allows skipping property with a specific name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In qemu the argument of 'ipv6-net' is split up into 'ipv6-prefix' and
'ipv6-prefixlen'. Additionally now that 'netdev_add' was qapified, only
the real properties are allowed. Switch to using them explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'tftp' storage protocol was supported by qemu until 2.7.0. Add an
interlock when blockdev is used and drop the test case for it as it's
IMO not worth adding another test file just for that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Make our QMP schema validator reject any use of schema entries which
were deprecated by QEMU except for those whitelisted.
This will allow us to catch this before qemu actually removed what we'd
still use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify the generated test cases for the 'cpu-add' and 'change' command
which are deprecated by qemu. We now use device-add and
blockdev-change-media instead so we are okay if they will be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The command was replaced with 'query-cpus-fast' which is always used
when detected by the capabilities so we can allow our test usage of
the deprecated command even if it will be removed from the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the test for the newer command into a new function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For sanity-chcecking of deprecated commands which are still used on some
old code paths which used the simple generated test cases add a
mechanism to mark them as deprecated so schema checking can be skipped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have a few cases validating that the code behaves correctly in
pre-modern hotplug era. This is controled by the 'modern' flag for the
test. Since 'cpu-add' command is now deprecated in qemu, there is a
modern replacement for it, and the test output is checked against
expected commands we can skip schema validation for the legacy command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some test cases are used to validate interactions with old qemu. We need
to skip validation of deprecation with those once it will be added.
In case of commands which were already replaced by code based on
capabilities we can skip the full validation once the command is
removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the code so that we pass in the repeated 'schema' and 'debug'
arguments via a new struct testQEMUSchemaValidateCtxt. This will
simplify adding new parameters in the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor all cleanup to avoid manual clearing, unnecessary labels and
return value variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will add validation which rejects objects with the
'deprecated' feature in the QMP schema. To support tests which deal with
legacy properties in case when a command or argument is marked as
deprecated or removed by qemu qemuMonitorTestSkipDeprecatedValidation
will allow configuring the tests to ignore such errors.
In case of commands/features which are not yet replaced, the
'allowRemoved' bool should not be set to provide a hard notification
once qemu drops the command.
Note that at this point 'allowRemoved' only includes whole commands, but
not specific properties.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We no longer return the error via the monitor, so the function no longer
returns '1'. Remove the mention from comment and fix callers to stop
looking for the return value of '1'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the ad-hoc command validation in favor of the new helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new helper splits out all steps necessary to validate a QMP command
against the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Only tests expected to fail should allow unused commads as the normal
tests will consume all of them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is 'numa-mem-supported' machine attribute which specifies
whether '-numa mem=' is supported. Store it in our capabilities
as it will be used in later commits when building the command
line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is not yet supported by virtiofsd.
Fixes#23 a.k.a. https://gitlab.com/libvirt/libvirt/-/issues/23
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This capability flags support for `-device pvscsi`, which provides the
VMware paravirtual SCSI controller.
Signed-off-by: Chris Jester-Young <cky@cky.nz>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Remember the preferred placement of <auth> and <encryption> for a disk
source across libvirtd restarts.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modern way to store <auth> and <encryption> of a <disk> is under
<source>. This was added to mirror how <backingStore> handles these and
in fact they are relevant to the source rather than to any other part of
the disk. Historically we allowed them to be directly under <disk> and
we need to keep compatibility.
This wasn't a problem until introduction of -blockdev in qemu using of
<auth> or <encryption> plainly wouldn't work with backing chains.
Now that it works in backing chains and can be moved back and forth
using snapshots/block-commit we need to ensure that the original
placement is properly kept even if the source changes.
To achieve the above semantics we need to store the preferred placement
with the disk definition rather than the storage source definitions and
also ensure that the modern way is chosen when the VM started with
<source/encryption> only in the backing store.
https://bugzilla.redhat.com/show_bug.cgi?id=1822878
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically the virtio-blk frontend by default enabled SCSI emulation
and tried to do SCSI command passthrough. As this was enabled by default
there's a fallback mechanism in place in cases when the backend doesn't
support SCSI for any reason.
This is not the case when disk type=lun is used with 'scsi-block' via
'virtio-scsi'.
We did not restrict configurations when the user picks 'qcow2' or any
other format as format of the disk, in which case the emulation is
disabled as such configuration doesn't make sense.
This patch unifies the approach so that 'raw' is required both when used
via 'virtio-blk' and 'virtio-scsi' so that the user is presented with
the expected configuration. Note that use of <disk type='lun'> is
already very restrictive as it requires a block device or iSCSI storage.
Additionally the scsi emulation is now deprecated by qemu with
virtio-blk as it conflicts with virtio-1 and the alternative is to use
'virtio-scsi' which performs better and is along for a very long time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The property was deprecated. Don't format it based on the new capability
if the user didn't explicitly request it.
https://bugzilla.redhat.com/show_bug.cgi?id=1829550
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically the 'scsi' passthrough feature of virtio-blk-pci
was enabled by default. Libvirt was disabling it due to security
implications outlined in libvirt commit v0.9.9-4-g177db08775 if it was
not explicitly requested. In qemu commit v2.4.0-1566-ged65fd1a27 the
default value was changed to disabled in preparation for virtio-1.
Starting from QEMU-5.0 the 'scsi' property was also deprecated. There
replacement for the functionality is to use 'virtio-scsi' for the
purpose. This isn't a direct replacement though.
Add capability named QEMU_CAPS_VIRTIO_BLK_SCSI_DEFAULT_DISABLED which
allows us to stop formatting the 'scsi=' property if it's disabled by
default and not requested so that we don't use deprecated features.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Help QEMU in deprecation of -drive if=none without the need to refactor
all old boards. Stop masking out -blockdev support when -drive if=sd
needs to be used. We achieve this by forbidding blockjobs and
special-casing all other code paths. Blockjobs are sacrificed in this
case as SD cards are a corner case for some ARM boards and are thus not
used commonly.
https://bugzilla.redhat.com/show_bug.cgi?id=1821692
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can't set the type of the device on the 'sd' bus and realistically a
cdrom doesn't even make sense there. Forbid it.
Note that the output of in disk-cdrom-bus-other.x86_64-latest.args
switched to blockdev as it's no longer locked out due to use of a disk
on 'sd' bus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'vexpress-a9' ARM board supports the native 'sd' bus as well as
virtio. Add a test case for proving that upcoming changes to handling of
'sd' work. This config was also tested with real qemu and the qemu
process starts correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case of 'sd' cards we'll use pre-blockdev code also if qemu supports
blockdev. In that specific case we'll need to mask out blockdev support
for 'sd' disks. Plumb in a boolean to allow it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the function and passing of 'def' through the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previously we've validated it in qemuCheckDiskConfig which was directly
called from the command line generator. Move the checks to the validator
where they belong.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the code from qemuCheckDiskConfigBlkdeviotune in
src/qemu/qemu_commandline.c to
qemuValidateDomainDeviceDefDiskBlkdeviotune.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch to DO_TEST_CAPS_LATEST for all of them and also add pre-blockdev
case for 'disk-discard' as we had it before.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the tests to DO_TEST_CAPS_LATEST. Since switch to blockdev stopped
us formatting the tunning parameters on the command line let's also add
version cases for qemu-4.1 data which doesn't enable blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit a13b2905f7 missed an adjustment to a test that is only run when
building against xen <= 4.9, where LIBXL_HAVE_BUILDINFO_NESTED_HVM is
not defined. Adjust fullvirt-cpuid-legacy-nest test similar to the others.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When no video device is specified in config we should set both
hvm.nographic to 1 and hvm.vga.kind to NONE.
Without hvm.vga.kind=LIBXL_VGA_INTERFACE_TYPE_NONE both -nographic and
-device 'cirrus-vga' are on qemu cmdline.
Signed-off-by: Artur Puzio <contact@puzio.waw.pl>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Turns out that it's not enough to pass the qemu:///embed root to
virQEMUDriverConfigNew(), you also have to make sure the same
string is copied into the virQEMUDriver structure yourself, and
not doing so in our case resulted in the cleanup never happening
and in distcheck failing because of that.
On the other hand, actually setting config->embeddedRoot would
result in different paths being generated for each test run, which
would obviously break qemuxml2argvtest, so that's not an option
either.
This reverts commit d98cc1968e.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Now that the QEMU driver natively supports storing all its runtime
data inside an arbitrary directory, we can avoid having multiple
copies of the same logic in the test suite.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To attempt to catch unit tests which accidentally create files in $HOME,
or $XDG_RUNTIME_DIR, poison these env vars by pointing them to
directories which don't exist. This should give easier to debug test
failures. For example:
$ VIR_TEST_DEBUG=1 ./qemuhotplugtest
Could not initialize HostdevManager - operation failed: Failed to create state dir '/bad-test-used-env-xdg-runtime-dir/libvirt/hostdevmgr'
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We need this for all tests that use virHostdevManager, because
during creation of this object for unprivileged connections
like those used in the test suite we would end up writing inside
the user's home directory.
That's bad manners in general, but when running the test suite
inside a purposefully constrained environment such as the one
exposed by pbuilder, it turns into an outright test failure:
Could not initialize HostdevManager - operation failed: Failed
to create state dir '/nonexistent/.cache/libvirt/hostdevmgr'
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The churn in the output files is caused primarily by the fact that
blockdev support has been introduced.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The churn in the output files is caused primarily by the fact that
replies were generated on a POWER9 machine, which is good because
we didn't have coverage of that before.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
