Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/lxc/lxc_container.c: Consistently use commas.
* src/openvz/openvz_driver.c: Likewise.
* src/openvz/openvz_util.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Without a 'return 0' in the stub lxcStartFuse() method, the
compiler warns:
lxc/lxc_fuse.c:374: error: control reaches end of non-void function
[-Wreturn-type]
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The glibc setxid is supposed to be async signal safe, but
libc developers confirm that it is not. This causes a problem
when libvirt_lxc starts the FUSE thread and then runs clone()
to start the container. If the clone() was done before the
FUSE thread has completely started up, then the container
will hang in setxid after clone().
The fix is to avoid creating any threads until after the
container has been clone()'d. By avoiding any threads in
the parent, the child is no longer required to run in an
async signal safe context, and we thus avoid the glibc
bug.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the host side of an LXC container console disconnected
and the guest side continued to write data, until the PTY
buffer filled up, the LXC controller would busy wait. It
would repeatedly see POLLHUP from poll() and not disable
the watch.
This was due to some bogus logic detecting blocking
conditions. Upon seeing a POLLHUP we must disable all
reading & writing from the PTY, and setup the epoll to
wake us up again when the connection comes back.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently we were storing domain feature flags in a bit field as the
they were either enabled or disabled. New features such as paravirtual
spinlocks however can be tri-state as the default option may depend on
hypervisor version.
To allow storing tri-state feature state in the same place instead of
having to declare dedicated variables for each feature this patch
refactors the bit field to an array.
Currently the LXC container tries to skip selinux/securityfs
mounts if the directory does not exist in the filesystem,
or if SELinux is disabled.
The former check is flawed because the /sys/fs/selinux
or /sys/kernel/securityfs directories may exist in sysfs
even if the mount type is disabled. Instead of just doing
an access() check, use an virFileIsMounted() to see if
the FS is actually present in the host OS. This also
avoids the need to check is_selinux_enabled().
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some mounts must be skipped if running inside a user namespace,
since the kernel forbids their use. Instead of strcmp'ing the
filesystem type in the body of the loop, set an explicit flag
in the lxcBasicMounts table.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the lxcBasicMounts array has separate entries for
most mounts, to reflect that we must do a separate mount
operation to make mounts read-only. Remove the duplicate
entries and instead set the MS_RDONLY flag against the main
entry. Then change lxcContainerMountBasicFS to look for the
MS_RDONLY flag, mask it out & do a separate bind mount.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'srcpath' variable is initialized from 'mnt->src' and never
changed thereafter. Some places continue to use 'mnt->src' and
others use 'srcpath'. Remove the pointless 'srcpath' variable
and use 'mnt->src' everywhere.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virLXCBasicMountInfo struct contains a 'char *opts'
field passed onto the mount() syscall. Every entry in the
list sets this to NULL though, so it can be removed to
simplify life.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Expand the "secmodel" XML fragment of "host" with a sequence of
baselabel's which describe the default security context used by
libvirt with a specific security model and virtualization type:
<secmodel>
<model>selinux</model>
<doi>0</doi>
<baselabel type='kvm'>system_u:system_r:svirt_t:s0</baselabel>
<baselabel type='qemu'>system_u:system_r:svirt_tcg_t:s0</baselabel>
</secmodel>
<secmodel>
<model>dac</model>
<doi>0</doi>
<baselabel type='kvm'>107:107</baselabel>
<baselabel type='qemu'>107:107</baselabel>
</secmodel>
"baselabel" is driver-specific information, e.g. in the DAC security
model, it indicates USER_ID:GROUP_ID.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The lxcContainerSetID() method prints a misleading log
message about setting the uid/gid when no ID map is
present in the XML config. Skip the debug message in
this case.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditional use of getenv is not secure in setuid env.
While not all libvirt code runs in a setuid env (since
much of it only exists inside libvirtd) this is not always
clear to developers. So make all the code paranoid, even
if it only ever runs inside libvirtd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When running setuid, we must be careful about what env vars
we allow commands to inherit from us. Replace the
virCommandAddEnvPass function with two new ones which do
filtering
virCommandAddEnvPassAllowSUID
virCommandAddEnvPassBlockSUID
And make virCommandAddEnvPassCommon use the appropriate
ones
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A typo in the setup of NBD backed filesystems meant the
/dev/nbdN device would not be added to the cgroups device
ACL.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up all remaining offenders.
* src/lxc/lxc_process.c (virLXCProcessSetupInterfaceBridged): Drop
needless const.
* src/uml/uml_driver.c (umlMonitorCommand): Use intended type.
(umlMonitorAddress): Fix fallout.
* src/xen/xm_internal.c (xenXMDomainSearchForUUID): Use intended type.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/conf/domain_conf, and their fallout.
Several things to note: virObjectLock() requires a non-const
argument; if this were C++, we could treat the locking field
as 'mutable' and allow locking an otherwise 'const' object, but
that is a more invasive change, so I instead dropped attempts
to be const-correct on domain lookup. virXMLPropString and
friends require a non-const xmlNodePtr - this is because libxml2
is not a const-correct library. We could make the src/util/virxml
wrappers cast away const, but I figured it was easier to not
try to mark xmlNodePtr as const. Finally, virDomainDeviceDefCopy
was a rather hard conversion - it calls virDomainDeviceDefPostParse,
which in turn in the xen driver was actually modifying the domain
outside of the current device being visited. We should not be
adding a device on the first per-device callback, but waiting until
after all per-device callbacks are complete.
* src/conf/domain_conf.h (virDomainObjListFindByID)
(virDomainObjListFindByUUID, virDomainObjListFindByName)
(virDomainObjAssignDef, virDomainObjListAdd): Drop attempt at
const.
(virDomainDeviceDefCopy): Use intended type.
(virDomainDeviceDefParse, virDomainDeviceDefPostParseCallback)
(virDomainVideoDefaultType, virDomainVideoDefaultRAM)
(virDomainChrGetDomainPtrs): Make const-correct.
* src/conf/domain_conf.c (virDomainObjListFindByID)
(virDomainObjListFindByUUID, virDomainObjListFindByName)
(virDomainDeviceDefCopy, virDomainObjListAdd)
(virDomainObjAssignDef, virDomainHostdevSubsysUsbDefParseXML)
(virDomainHostdevSubsysPciOrigStatesDefParseXML)
(virDomainHostdevSubsysPciDefParseXML)
(virDomainHostdevSubsysScsiDefParseXML)
(virDomainControllerModelTypeFromString)
(virDomainTPMDefParseXML, virDomainTimerDefParseXML)
(virDomainSoundCodecDefParseXML, virDomainSoundDefParseXML)
(virDomainWatchdogDefParseXML, virDomainRNGDefParseXML)
(virDomainMemballoonDefParseXML, virDomainNVRAMDefParseXML)
(virSysinfoParseXML, virDomainVideoAccelDefParseXML)
(virDomainVideoDefParseXML, virDomainHostdevDefParseXML)
(virDomainRedirdevDefParseXML)
(virDomainRedirFilterUsbDevDefParseXML)
(virDomainRedirFilterDefParseXML, virDomainIdMapEntrySort)
(virDomainIdmapDefParseXML, virDomainVcpuPinDefParseXML)
(virDiskNameToBusDeviceIndex, virDomainDeviceDefCopy)
(virDomainVideoDefaultType, virDomainHostdevAssignAddress)
(virDomainDeviceDefPostParseInternal, virDomainDeviceDefPostParse)
(virDomainChrGetDomainPtrs, virDomainControllerSCSINextUnit)
(virDomainSCSIDriveAddressIsUsed)
(virDomainDriveAddressIsUsedByDisk)
(virDomainDriveAddressIsUsedByHostdev): Fix fallout.
* src/openvz/openvz_driver.c (openvzDomainDeviceDefPostParse):
Likewise.
* src/libxl/libxl_domain.c (libxlDomainDeviceDefPostParse):
Likewise.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse)
(qemuDomainDefaultNetModel): Likewise.
* src/lxc/lxc_domain.c (virLXCDomainDeviceDefPostParse):
Likewise.
* src/uml/uml_driver.c (umlDomainDeviceDefPostParse): Likewise.
* src/xen/xen_driver.c (xenDomainDeviceDefPostParse): Split...
(xenDomainDefPostParse): ...since per-device callback is not the
time to be adding a device.
Signed-off-by: Eric Blake <eblake@redhat.com>
Make the virLXCProcessReadLogOutputData method ignore the log
lines about the container startup argv, ignore the generic
error message from libvirt_lxc when lxcContainerMain fails
and skip over blank lines.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The lxcContainerResolveSymlinks method merely logged some errors
as debug messages, rather than reporting them as proper errors.
This meant startup failures were not diagnosed at all.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure the lxcContainerMain method reports any errors that
occur during setup to stderr, where libvirtd will pick them
up.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In Fedora 20, libvirt_lxc crashes immediately at startup with a
trace
#0 0x00007f0cddb653ec in free () from /lib64/libc.so.6
#1 0x00007f0ce0e16f4a in virFree (ptrptr=ptrptr@entry=0x7f0ce1830058) at util/viralloc.c:580
#2 0x00007f0ce0e2764b in virResetError (err=0x7f0ce1830030) at util/virerror.c:354
#3 0x00007f0ce0e27a5a in virResetLastError () at util/virerror.c:387
#4 0x00007f0ce0e28858 in virEventRegisterDefaultImpl () at util/virevent.c:233
#5 0x00007f0ce0db47c6 in main (argc=11, argv=0x7fff4596c328) at lxc/lxc_controller.c:2352
Normally virInitialize calls virErrorInitialize and
virThreadInitialize, but we don't link to libvirt.so
in libvirt_lxc, and nor did we ever call the error
or thread initializers.
I have absolutely no idea how this has ever worked, let alone
what caused it to stop working in Fedora 20.
In addition not all code paths from virLogSetFromEnv will
ensure virLogInitialize is called correctly, which is another
possible crash scenario.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC code would read the log file if an LXC guest failed to
startup. There were a number of failure cases where the guest
will not start and libvirtd never gets as far as looking at the
log file.
Fix this by replacing some earlier generic errors with messages
from the log.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC controller main() method initialized 'rc' to 1
rather than '-1'. In the cleanup path it will print any
error to stderr, if-and-only-if rc < 0. Hence the incorrect
initialization caused errors to be lost.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC controller uses dbus to talk to systemd to create
cgroups. This means that each LXC controller instance has
a dbus connection. The DBus daemon is limited to 256
connections by default and we want to be able to run many
1000 of containers.
While the dbus limit could be raised in the config files,
it is simpler to make libvirt LXC controller close its
dbus connection once everything is configured.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since 76b644c when the support for RAM filesystems was introduced,
libvirt accepted the following XML:
<source usage='1024' unit='KiB'/>
This was parsed correctly and internally stored in bytes, but it
was formatted as (with an extra 's'):
<source usage='1024' units='KiB'/>
When read again, this was treated as if the units were missing,
meaning libvirt was unable to parse its own XML correctly.
The usage attribute was documented as being in KiB, but it was not
scaled if the unit was missing. Transient domains still worked,
because this was balanced by an extra 'k' in the mount options.
This patch:
Changes the parser to use 'units' instead of 'unit', as the latter
was never documented (fixing persistent domains) and some programs
(libvirt-glib, libvirt-sandbox) already parse the 'units' attribute.
Removes the extra 'k' from the tmpfs mount options, which is needed
because now we parse our own XML correctly.
Changes the default input unit to KiB to match documentation, fixing:
https://bugzilla.redhat.com/show_bug.cgi?id=1015689
The virConnectPtr is passed around loads of nwfilter code in
order to provide it as a parameter to the callback registered
by the virt drivers. None of the virt drivers use this param
though, so it serves no purpose.
Avoiding the need to pass a virConnectPtr means that the
nwfilterStateReload method no longer needs to open a bogus
QEMU driver connection. This addresses a race condition that
can lead to a crash on startup.
The nwfilter driver starts before the QEMU driver and registers
some callbacks with DBus to detect firewalld reload. If the
firewalld reload happens while the QEMU driver is still starting
up though, the nwfilterStateReload method will open a connection
to the partially initialized QEMU driver and cause a crash.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If veth device allocation has a fatal error, the veths
array may contain NULL device names. Avoid calling the
virNetDevVethDelete function on such names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
During container cleanup there is a race where the kernel may
have destroyed the veth device before we try to set it offline.
This causes log error messages. Given that we're about to
delete the device entirely, setting it offline is pointless.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We forgot to do cleanup when lxcContainerMountFSTmpfs
failed to bind fs as read-only.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The problem is described by [0] but its effect on libvirt is that
starting a container with a full distro running systemd after having
stopped it simply fails.
The container cleanup now calls the machined Terminate function to make
sure that everything is in order for the next run.
[0]: https://bugs.freedesktop.org/show_bug.cgi?id=68370
If a dir does not exist, raise an immediate error in logs
rather than letting virFileResolveAllLinks fail, since this
gives better error reporting to the user.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
When FUSE is enabled, the LXC container is setup with
a custom /proc/meminfo file. This file uses "KB" as a
suffix, rather than "kB" which is the kernel's style.
Fix this inconsistency to avoid confusing apps.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Right now we mount selinuxfs even user namespace is enabled and
ignore the error. But we shouldn't ignore these errors when user
namespace is not enabled.
This patch skips mounting selinuxfs when user namespace enabled.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
If the guest is configured with
<filesystem type='mount'>
<source dir='/'/>
<target dir='/'/>
<readonly/>
</filesystem>
Then any submounts under / should also end up readonly, except
for those setup as basic mounts. eg if the user has /home on a
separate volume, they'd expect /home to be readonly, but we
should not touch the /sys, /proc, etc dirs we setup ourselves.
Users can selectively make sub-mounts read-write again by
simply listing them as new mounts without the <readonly>
flag set
<filesystem type='mount'>
<source dir='/home'/>
<target dir='/home'/>
</filesystem>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the array of basic mounts out of the lxcContainerMountBasicFS
function, to a global variable. This is to allow it to be referenced
by other methods wanting to know what the basic mount paths are.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The devpts, dev and fuse filesystems are mounted temporarily.
there is no need to export them to container if container shares
the root directory with host.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
