Commit id '3992ff14' added the prototype for networkGetActualType
with 1 parameter, but added 2 ATTRIBUTE_NONNULL's (assume from a
cut-n-paste), just remove (2).
Commit d77ffb6876 added not only reporting of the PCI header type, but
also parsing of that information. However, because there was no parsing
done for the other sub-PCI capabilities, if there was any other
capability then a valid header type name (like phys_function or
virt_functions) the parsing would fail. This prevented passing node
device XMLs that we generated into our own functions when dealing with,
e.g. with SRIOV cards.
Instead of reworking the whole parsing, just fix this one occurence and
remove a test for it for the time being. Future patches will deal with
the rest.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Starting with commit f8e712fe, if you start a domain that has an
<interface type='hostdev' (or that has <interface type='network'>
where the network is a pool of devices for hostdev assignment), when
you later try to add *another* interface (of any kind) with hotplug,
the function qemuAssignDeviceNetAlias() fails as soon as it sees a
"hostdevN" alias in the list of interfaces), causing the attach to
fail.
This is because (starting with f8e712fe) the device alias names are
assigned during the new function qemuProcessPrepareDomain(), which is
called *before* networkAllocateActualDevice() (which is called from
qemuProcessPrepareHost(), which is called from
qemuProcessLaunch()). Prior to that commit,
networkAllocateActualDevice() was called first.
The problem with this is that the alias for interfaces that are really
a hostdev (<interface type='hostdev'>) is of the form "hostdevN" (just
like other hostdevs), while other interfaces are "netN". But if you
don't know that the interface is going to be a hostdev at the time you
assign the alias name, you can't name it differently. (As far as I've
seen so far, the change in name by itself wouldn't have been a problem
(other than just an outwardly noticeable change in behavior) except
for the abovementioned failure to attach/detach new interfaces.
Rather than take the chance that there may be other not-yet-revealed
problems associated with changing the alias name, this patch changes
the way that aliases are assigned to restore the old behavior.
Old: In the past, assigning an alias to an interface was skipped if it
was seen that the interface was type='hostdev' - we knew that the
hostdev part of the interface was also in the list of hostdevs (that's
part of what happens in networkAllocateActualDevice()) and it would be
assigned when all the other hostdev aliases were assigned.
New: When assigning an alias to an interface, we haven't yet called
networkAllocateActualDevice() to construct the hostdev part of the
interface, so we can't just wait for the loop that creates aliases for
all the hostdevs (there's nothing on that list for this device
yet!). Instead we handle it immediately in the loop creating interface
aliases, by calling the new function networkGetActualType() to
determine if it is going to be hostdev, and if so calling
qemuAssignDeviceHostdevAlias() instead.
Some adjustments have to be made to both
qemuAssignDeviceHostdevAlias() and to qemuAssignDeviceNetAlias() to
accommodate this. In both of them, an error return from
qemuDomainDeviceAliasIndex() is no longer considered an error; instead
it's just ignored (because it almost certainly means that the alias
string for the device was "net" when we expected "hostdev" or vice
versa). in qemuAssignDeviceHostdevAlias() we have to look at all
interface aliases for hostdevN in addition to looking at all hostdev
aliases (this wasn't necessary in the past, because both the interface
entry and the hostdev entry for the device already pointed at the
device info; no longer the case since the hostdev entry hasn't yet
been setup).
Fortunately the buggy behavior hasn't yet been in any official release
of libvirt.
In certain cases, we need to assign a hostdevN-style alias in a case
when we don't have a virDomainHostdevDefPtr (instead we have a
virDomainNetDefPtr). Since qemuAssignDeviceHostdevAlias() doesn't use
anything in the virDomainHostdevDef except the alias string itself
anyway, this patch just changes the arguments to pass a pointer to the
alias pointer instead.
There are times when it's necessary to learn the actual type of a
network connection before any resources have been allocated
(e.g. during qemuProcessPrepareDomain()), but in the past it was
necessary to call networkAllocateActualDevice() in order to have the
actual type filled in.
This new function returns the type of network that *will be* setup
once it actually happens, but without making any changes on the host.
The paths have the domain ID in them. Without cleaning them, they would
contain the same ID even after multiple restarts. That could cause
various problems, e.g. with access.
Add function qemuDomainClearPrivatePaths() for this as a counterpart of
qemuDomainSetPrivatePaths().
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The directory name changed in a89f05ba8d.
This unbreaks launching QEMU/KVM VMs with apparmor enabled. It also adds
the directory for the qemu guest-agent socket which is not known when
parsing the domain XML.
This reverts commit ee4cfb5643.
Since we're still not persisting our bookkeeping lists across
daemon restarts, we might have lost some information
virPCIDeviceReattach() relies on, for example whether the
device needs to be unbound from the stub driver.
As a result, if the daemon has been restarted in the meantime,
the device might end up remaining bound to the stub driver even
after 'virsh nodedev-reattach' or similar has been called, with
no way of giving it back to the host short of messing with
sysfs behind libvirt's back.
Revert back to the previous behavior of always trying to bind
the device to the host driver, regardless of its status when it
was detached, until persistent bookkeeping lists have been
implemented.
According to MDN[1], 'margin-left' and similar CSS properties,
including 'margin-right', cannot be applied to the '::first-line'
pseudo-element, so this rule will never have any effect and can
be safely removed.
[1] https://developer.mozilla.org/en/docs/Web/CSS/::first-line
When using the --start option, the show_count should not be set to
max_id as the --start <cpu> means we dont need those many initial cpu
stats. Hence, show_count should be adjusted accordingly.
https://bugzilla.redhat.com/show_bug.cgi?id=1249441
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit 08cc14f moved the conversion of MiB/s to B/s out of the
qemuMonitor APIs, but forgot to adjust the qemuMigrationDriveMirror
caller.
This patch will convert the migrate_speed value from MiB/s to its
mirror_speed equivalent in bytes/s.
Signed-off-by: Rudy Zhang <rudyflyzhang@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
@flags have a valid modification impact only after calling
virDomainObjUpdateModificationImpact. virDomainObjGetOneDef calls it but
doesn't update them in the caller.
Chunyan sent a nice cleanup patch for libxlDomainDetachNetDevice
https://www.redhat.com/archives/libvir-list/2016-March/msg00926.html
which I incorrectly modified before pushing as commit b5534e53. My
modification caused network devices of type hostdev to no longer
be removed. This patch changes b5534e53 to resemble Chunyan's
original, correct patch.
Chunyan sent a correct patch to fix a resource leak on error in
libxlDomainAttachNetDevice
https://www.redhat.com/archives/libvir-list/2016-March/msg00924.html
I made what was thought to be an improvement and pushed the patch as
commit e6336442. As it turns out, my change broke adding net devices
that are actually hostdevs to the list of nets in virDomainDef. This
patch changes e6336442 to resemble Chunyan's original, correct
patch.
Compilation for xdg-app failed due to a buggy SASL headers present on
the used runtime (org.gnome.Sdk 3.18).
In file included from rpc/virnetsaslcontext.h:24:0,
from rpc/virnetsaslcontext.c:25:
/usr/include/sasl/sasl.h:230:38: error: unknown type name 'size_t'
typedef void *sasl_realloc_t(void *, size_t);
^
/usr/include/sasl/sasl.h:235:5: error: unknown type name 'sasl_realloc_t'
sasl_realloc_t *,
Use the same workaround as commit 1be3dfd did.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We use _LAST items in enums to mark the last position in given
enum. Now, if and enum is passed to switch(), compiler checks
that all the values from enum occur in 'case' enumeration.
Including _LAST. But coverity spots it's a dead code. And it
really is. So to resolve this, we tend to put a comment just
above 'case ..._LAST' notifying coverity that we know this is a
dead code but we want to have it that way.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Do I really need to explain why?
Well, if read() is interrupted int the middle of reading, we will
never read the rest (even though it's highly unlikely as we are
reading just 8 bytes).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Even though we have the machine locked throughout whole APIs we
are querying/modifying domain internal state. We should grab a
job whilst doing that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have @flags we can support changing perf events just
in active or inactive configuration regardless of the other.
Previously, calling virDomainSetPerfEvents set events in both
active and inactive configuration at once. Even though we allow
users to set perf events that are to be enabled once domain is
started up. The virDomainGetPerfEvents API was flawed too. It
returned just runtime info.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Everywhere else we use a comma separated list. There's no good
reason to make 'perf' command an exception. Currently, it accepts
string list separated by '|'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed that these APIs are missing @flags argument. Even
though we don't have a use for them, it's our policy that every
new API must have @flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
They recently were extracted to a separate function. They don't belong
together though. Since -numa formatting is pretty compact, move it to
the main function and rename qemuBuildNumaCommandLine to
qemuBuildMemoryDeviceCommandLine.
When starting up a VM libvirtd asks numad to place the VM in case of
automatic nodeset. The nodeset would not be passed to the memory device
formatter and the user would get an error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1269715
Commit 7068b56c introduced several hyperv features. Not all hyperv
features are supported by old enough kernels and we shouldn't allow to
start a guest if kernel doesn't support any of the hyperv feature.
There is one exception, for backward compatibility we cannot error out
if one of the RELAXED, VAPIC or SPINLOCKS isn't supported, for the same
reason we ignore invtsc, to not break restoring saved domains with older
libvirt.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This check is there to allow restore saved domain with older libvirt
where we included invtsc by default for host-passthrough model. Don't
skip the whole function, but only the part that checks for invtsc.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
