A logic bug in qemuConnectGetAllDomainStats makes the code mark the
monitor as available when qemuDomainObjBeginJob fails, instead of when
it succeeds, as the correct flow requires.
This patch fixes the check and updates the code documentation
accordingly.
Broken by commit 57023c0a3a.
Signed-off-by: Francesco Romani <fromani@redhat.com>
When using qemuProcessAttach to attach a qemu process,
the DAC label is not filled correctly.
Introduce a new function to get the uid:gid from the system
and fill the label.
This fixes the daemon crash when 'virsh screenshot' is called:
https://bugzilla.redhat.com/show_bug.cgi?id=1161831
It also fixes qemu-attach after the prerequisite of this patch
(commit f8c1fb3) was pushed out of order.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Currently, MAC registration occurs during device creation, which is
early enough that, during live migration, you end up with duplicate
MAC addresses on still-running source and target devices, even though
the target device isn't actually being used yet.
This patch proposes to defer MAC registration until right before
the guest can actually use the device -- In other words, right
before starting guest CPUs.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
Some programs want to change some values for the network interfaces
configuration in /proc/sys/net/ipv[46] folders. Giving RW access on them
allows wicked to work on openSUSE 13.2+.
Reusing the lxcNeedNetworkNamespace function to tell
lxcContainerMountBasicFS if the netns is disabled. When no netns is
set up, then we don't mount the /proc/sys/net/ipv[46] folder RW as
these would provide full access to the host NICs config.
https://bugzilla.redhat.com/show_bug.cgi?id=1172015
The refactoring done as part of commit id '59446096' caused a regression
for the multi initiator IQN commit '6aabcb5b' because the sendtargets was
not done on/for the initiator IQN prior to login (or trying to disable
autologin)
Prior to that commit, the paths were essentially
virStorageBackendISCSIStartPool
virStorageBackendISCSILogin
virStorageBackendISCSIConnection
if initiatoriqn
virStorageBackendCreateIfaceIQN
Issue sendtargets
Perform --login
else
Issue sendtargets
Perform --login
After that commit:
virStorageBackendISCSIStartPool
Issue sendtargets
Call virStorageBackendISCSIConnection
If initiatoriqn
virStorageBackendCreateIfaceIQN
Perform --login
else
Perform --login
So for non initiator IQN paths, nothing changed. For the initiator path,
the --login fails as does any attempts to change autologin via "--op update
--name node.startup --value manual".
In old version of parted like parted-2.1-25, error message is shown in
stdout when printing a disk info without disk label.
Error: /dev/sda: unrecognised disk label
This line has been moved to stderr in newer version of parted. So we
should check both stdout and stderr when locating this message.
This should fix bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1172468
Signed-off-by: Hao Liu <hliu@redhat.com>
When user doesn't have read access on one of the domains he requested,
the for loop could exit abruptly or continue and override pointer which
pointed to locked object.
This patch fixed two issues at once. One is that domflags might have
had QEMU_DOMAIN_STATS_HAVE_JOB even when there was no job started (this
is fixed by doing domflags |= QEMU_DOMAIN_STATS_HAVE_JOB only when the
job was acquired and cleaning domflags on every start of the loop.
Second one is that the domain is kept locked when
virConnectGetAllDomainStatsCheckACL() fails and continues the loop when
it didn't end. Adding a simple virObjectUnlock() and clearing the
pointer ought to do.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If we want to perform some operation and domain state is not suitable
for that operation, we should report error VIR_ERR_OPERATION_INVALID.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
When PrlJob_GetRetCode sets second argument to
error value it means sdk function failed and we
must return error from getJobResultHelper.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Return error code, returned by parallels SDK from
waitJob and getJobResult, so that caller can handle
different errors.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Get cdrom devices list from parallels server in
prlsdkLoadDomains and add ability to define a domain
with cdroms.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
First, we don't need to call prlsdkApplyConfig after
creating new VM or containers, because it's done in
functions prlsdkCreateVm and prlsdkCreateCt.
No need to check, if domain exists in the list after
prlsdkAddDomain.
Also organize code, so that we can call virObjectUnlock
in one place.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
This patch replaces code, which creates domains by
running prlctl command.
prlsdkCreateVm/Ct will do prlsdkApplyConfig, because
we send request to the server only once in this case.
But prlsdkApplyConfig will be called also from
parallelsDomainDefineXML function. There is no problem with
it, parallelsDomainDefineXML will be refactored later.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Rewrite code, which applies domain configuration given
to virDomainDefineXML function to the VM of container
registered in PCS.
This code first check if there are unsupported parameters
in domain XML and if yes - reports error. Some of such
parameters are not supported by PCS, for some - it's not
obvious, how to convert them into PCS's corresponding params,
so let's put off it, and implement only basic params in
this patch.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Change domain state using parallels SDK functions instead of
prlctl command.
We don't need to send events from these functions now, becase
events handler will send them. But we still need to update
virDomainObj in privconn->domains.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Subscribe to events from parallels server. It's
needed for 2 things: to update cached domains list
and to send corresponding libvirt events.
Parallels server sends a lot of different events, in
this patch we handle only some of them. In the future
we can handle for example, changes in a host network
configuration or devices states.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Move macro parallelsDomNotFoundError to file parallels_utils.h, because
it will be used in parallels_sdk.c.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Obtain information about domains using parallels sdk instead of prlctl.
prlsdkLoadDomains functions behaves as former parallelsLoadDomains with
NULL as second parameter (name) - it fills parallelsConn.domains list.
prlsdkLoadDomain is now able to update specified domain by given
virDomainObjPtr.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1082521
Support for shared hostdev's was added in a number of commits, initially
starting with 'f2c1d9a80' and most recently commit id 'fd243fc4' to fix
issues with the initial implementation. Missed in all those changes was
the need to mimic the virSELinux{Set|Restore}SecurityDiskLabel code to
handle the "shared" (or shareable) and readonly options when Setting
or Restoring the SELinux labels.
This patch will adjust the virSecuritySELinuxSetSecuritySCSILabel to not
use the virSecuritySELinuxSetSecurityHostdevLabelHelper in order to set
the label. Rather follow what the Disk code does by setting the label
differently based on whether shareable/readonly is set. This patch will
also modify the virSecuritySELinuxRestoreSecuritySCSILabel to follow
the same logic as virSecuritySELinuxRestoreSecurityImageLabelInt and not
restore the label if shared/readonly
https://bugzilla.redhat.com/show_bug.cgi?id=1171582
When we edit a negative controller address number to a device,
some of them will auto generate a controller with invalid index
number. This will make guest disappear after restart libvirtd.
Instead of allowing negative number for controller index, we
should forbid negative number in these place (we did this before,
but after f18c02ec, virStrToLong_ui changed to allow negative
number). Therefore switch to virStrToLong_uip in these places.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Avoid leaving the domain locked on a failed ACL check in
qemuDomainMigratePerform() and qemuDomainMigrateFinish2().
Introduced in commit abf75aea24 (Add ACL checks into the QEMU driver).
Commit c75425734 introduced a compilation failure:
../../src/access/viraccessdriverpolkit.c: In function 'virAccessDriverPolkitCheck':
../../src/access/viraccessdriverpolkit.c:137:5: error: format '%d' expects argument of type 'int', but argument 9 has type 'pid_t' [-Werror=format=]
VIR_DEBUG("Check action '%s' for process '%d' time %lld uid %d",
^
Since mingw pid_t is 64 bits, it's easier to just follow what we've
done elsewhere and cast to a large enough type when printing pids.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Add cast.
Signed-off-by: Eric Blake <eblake@redhat.com>
lxcProcessSetupInterfaces() used to have a special case for
actualType='network' (a network with forward mode of route, nat, or
isolated) to call the libvirt public API to retrieve the bridge being
used by a network. That is no longer necessary - since all network
types that use a bridge and tap device now get the bridge name stored
in the ActualNetDef, we can just always use
virDomainNetGetActualBridgeName() instead.
qemuNetworkIfaceConnect() used to have a special case for
actualType='network' (a network with forward mode of route, nat, or
isolated) to call the libvirt public API to retrieve the bridge being
used by a network. That is no longer necessary - since all network
types that use a bridge and tap device now get the bridge name stored
in the ActualNetDef, we can just always use
virDomainNetGetActualBridgeName() instead.
(an audit of the two callers to qemuNetworkIfaceConnect() confirms
that it is never called for any other type of network, so the dead
code in the else statement (logging an internal error if it is called
for any other type of network) is eliminated in the process.)
When libvirt is managing the MAC table of a Linux host bridge, it must
turn off learning and unicast_flood for each tap device attached to
that bridge, then add a Forwarding Database (fdb) entry for the tap
device using the MAC address from the domain interface config.
Once we have disabled learning and flooding, any packet that has a
destination MAC address not present in the fdb will be dropped by the
bridge. This, along with the opportunistic disabling of promiscuous
mode[*], can result in enhanced network performance. and a potential
slight security improvement.
[*] If there is only one device on the bridge with learning/unicast_flood
enabled, then that device will automatically have promiscuous mode
disabled. If there are *no* devices with learning/unicast_flood
enabled (e.g. for a libvirt "route", "nat", or isolated network that
has no physical device attached), then all non-tap devices will have
promiscuous mode disabled (tap devices always have promiscuous mode
enabled, which may be a bug in the kernel, but in practice has 0
effect).
None of this has any effect for kernels prior to 3.15 (upstream kernel
commit 2796d0c648c940b4796f84384fbcfb0a2399db84 "bridge: Automatically
manage port promiscuous mode"). Even after that, until kernel 3.17
(upstream commit 5be5a2df40f005ea7fb7e280e87bbbcfcf1c2fc0 "bridge: Add
filtering support for default_pvid") traffic will not be properly
forwarded without manually adding vlan table entries. Unfortunately,
although the presence of the first patch is signalled by existence of
the "learning" and "unicast_flood" options in sysfs, there is no
reliable way to query whether or not the system's kernel has the
second of those patches installed, the only thing that can be done is
to try the setting and see if traffic continues to pass.
When the bridge device for a network has macTableManager='libvirt' the
intent is that all kernel management of the bridge's MAC table
(Forwarding Database, or fdb, in the case of a Linux Host Bridge) be
disabled, with libvirt handling updates to the table instead. The
setup required for the bridge itself is:
1) set the "vlan_filtering" property of the bridge device to 1.
2) If the bridge has a "Dummy" tap device used to set a fixed MAC
address on the bridge (which is always the case for a bridge created
by libvirt, and never the case for a bridge created by the host system
network config), turn off learning and unicast_flood on this tap (this
is needed even though this tap is never IFF_UP, because the kernel
ignores the IFF_UP flag of devices when using their settings to
automatically decide whether or not to turn off promiscuous mode for
any attached device).
(1) is done both for libvirt-created/managed bridges, and for bridges
that are created by the host system config, while (2) is done only for
bridges created by libvirt (i.e. for forward modes of nat, routed, and
isolated bridges)
There is no attempt to turn vlan_filtering off when destroying the
network because in the case of a libvirt-created bridge, the bridge is
about to be destroyed anyway, and in the case of a system bridge, if
the other devices attached to the bridge could operate properly before
destroying libvirt's network object, they will continue to operate
properly (this is similar to the way that libvirt will enable
ip_forwarding whenever a routed/natted network is started, but will
never attempt to disable it if they are stopped).
At the time that the network driver allocates a connection to a
network, the tap device that will be used hasn't yet been created -
that will be done later by qemu (or lxc or whoever) - but if the
network has macTableManager='libvirt', then when we do get around to
creating the tap device, we will need to add an entry for it to the
network bridge's fdb (forwarding database) *and* turn off learning and
unicast_flood for that tap device in the bridge's sysfs settings. This
means that qemu needs to know both the bridge name as well as the
setting of macTableManager, so we either need to create a new API to
retrieve that info, or just pass it back in the ActualNetDef that is
created during networkAllocateActualDevice. We choose the latter
method, since it's already done for the bridge device, and it has the
side effect of making the information available in domain status.
(NB: in the future, I think that the tap device should actually be
created by networkAllocateActualDevice(), as that will solve several
other problems, but that is a battle for another day, and this
information will still be useful outside the network driver)
When the actualType of a virDomainNetDef is "network", it means that
we are connecting to a libvirt-managed network (routed, natted, or
isolated) which does use a bridge device (created by libvirt). In the
past we have required drivers such as qemu to call the public API to
retrieve the bridge name in this case (even though it is available in
the NetDef's ActualNetDef if the actualType is "bridge" (i.e., an
externally-created bridge that isn't managed by libvirt). There is no
real reason for this difference, and as a matter of fact it
complicates things for qemu. Also, there is another bridge-related
attribute (macTableManager) that will need to be available in both
cases, so this makes things consistent.
In order to avoid problems when restarting libvirtd after an update
from an older version that *doesn't* store the network's bridgename in
the ActualNetDef, we also need to put it in place during
networkNotifyActualDevice() (this function is run for each interface
of each domain whenever libvirtd is restarted).
Along with making the bridge name available in the internal object, it
is also now reported in the <source> element of the <interface> state
XML (or the <actual> subelement in the internally-stored format).
The one oddity about this change is that usually there is a separate
union for every different "type" in a higher level object (e.g. in the
case of a virDomainNetDef there are separate "network" and "bridge"
members of the union that pivots on the type), but in this case
network and bridge types both have exactly the same attributes, so the
"bridge" member is used for both type==network and type==bridge.
The macTableManager attribute of a network's bridge subelement tells
libvirt how the bridge's MAC address table (used to determine the
egress port for packets) is managed. In the default mode, "kernel",
management is left to the kernel, which usually determines entries in
part by turning on promiscuous mode on all ports of the bridge,
flooding packets to all ports when the correct destination is unknown,
and adding/removing entries to the fdb as it sees incoming traffic
from particular MAC addresses. In "libvirt" mode, libvirt turns off
learning and flooding on all the bridge ports connected to guest
domain interfaces, and adds/removes entries according to the MAC
addresses in the domain interface configurations. A side effect of
turning off learning and unicast_flood on the ports of a bridge is
that (with Linux kernel 3.17 and newer), the kernel can automatically
turn off promiscuous mode on one or more of the bridge's ports
(usually only the one interface that is used to connect the bridge to
the physical network). The result is better performance (because
packets aren't being flooded to all ports, and can be dropped earlier
when they are of no interest) and slightly better security (a guest
can still send out packets with a spoofed source MAC address, but will
only receive traffic intended for the guest interface's configured MAC
address).
The attribute looks like this in the configuration:
<network>
<name>test</name>
<bridge name='br0' macTableManager='libvirt'/>
...
This patch only adds the config knob, documentation, and test
cases. The functionality behind this knob is added in later patches.
These two functions use netlink RTM_NEWNEIGH and RTM_DELNEIGH messages
to add and delete entries from a bridge's fdb. The bridge itself is
not referenced in the arguments to the functions, only the name of the
device that is attached to the bridge (since a device can only be
attached to one bridge at a time, and must be attached for this
function to make sense, the kernel easily infers which bridge's fdb is
being modified by looking at the device name/index).
I'm about to make block stats optionally more complex to cover
backing chains, where block.count will no longer equal the number
of <disks> for a domain. For these reasons, it is nicer if the
statistics output includes the source path (for local files).
This patch doesn't add anything for network disks, although we
may decide to add that later.
With this patch, I now see the following for the same domain as
in the previous patch (one qcow2 file, and an empty cdrom drive):
$ virsh domstats --block foo
Domain: 'foo'
block.count=2
block.0.name=hda
block.0.path=/var/lib/libvirt/images/foo.qcow2
block.1.name=hdc
* src/libvirt-domain.c (virConnectGetAllDomainStats): Document
new field.
* tools/virsh.pod (domstats): Document new field.
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Return the new
stat for local files/block devices.
(QEMU_ADD_NAME_PARAM): Add parameter.
(qemuDomainGetStatsInterface): Update caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
I noticed that for an offline domain, 'virsh domstats --block $dom'
was producing just the domain name, with no stats. But the older
'virsh domblkinfo' works just fine on offline domains. This patch
starts to get us closer, by at least reporting the disk names for
an offline domain.
With this patch, I now see the following for an offline domain
with one qcow2 disk and an empty cdrom drive:
$ virsh domstats --block foo
Domain: 'foo'
block.count=2
block.0.name=hda
block.1.name=hdc
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Don't short-circuit
output of block name.
Signed-off-by: Eric Blake <eblake@redhat.com>
At least with 'virsh domstats --block' on an offline domain, we
currently output no stats even though we recognize the stat
category. Although a later patch will improve this situation,
it is better to document that this is expected behavior.
Also, while the current implementation rejects filtering flags
for virDomainListGetStats, this limitation may be lifted in the
future and we do not enforce it at the API level.
* src/libvirt-domain.c (virConnectGetAllDomainStats): Document
that recognized stats might not be reported.
(virDomainListGetStats): Likewise, and tweak filtering documentation.
Signed-off-by: Eric Blake <eblake@redhat.com>
qemuDomainGetStatsBlock() could leak a stats hash table if it
encountered OOM while populating the virTypedParameters.
Oddly, the fix doesn't even touch qemuDomainGetStatsBlock :)
* src/qemu/qemu_driver.c (QEMU_ADD_COUNT_PARAM)
(QEMU_ADD_NAME_PARAM): Don't return early.
(qemuDomainGetStatsInterface): Adjust caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
Whenever client socket was marked as closed for some reason, it could've
been changed when really closing the connection. With this patch the
proper reason is kept since the first time it's marked as closed.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When user tries to insert element metadata providing a namespace
declaration as well, currently we insert the element without any validation
check for XML prefix (if provided). The next VM start would then
fail with parse error. This patch fixes this issue by adding a call to
xmlValidateNCName function to check for illegal characters in the
prefix.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1143921
If probing capabilities via QMP fails, we now have a check
that prevents us falling back to -help parsing. Unfortunately
the error message
"Failed to probe capabilities for /usr/bin/qemu-kvm:
unsupported configuration: QEMU 2.1.2 is too new for help parsing"
is proving rather unhelpful to the user. We need to be telling
them why QMP failed (the root cause), rather than they can't
use -help (the side effect).
To do this we should capture stderr during QMP probing, and
if -help parsing then sees a new QEMU version, we know that
QMP should have worked, and so we can show the messages from
stderr. The message thus becomes
"Failed to probe capabilities for /usr/bin/qemu-kvm:
internal error: QEMU / QMP failed: Could not access
KVM kernel module: No such file or directory
failed to initialize KVM: No such file or directory"
When attempting to create internal system checkpoint with a passthrough
device qemu will report the following error:
error: operation failed: Error -22 while writing VM
This patch calls the function to check if migration is possible with
given VM and thus improves the error to:
error: Requested operation is not valid: domain has assigned non-USB host devices
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=874418#c19
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1115292
In one of the previous commits (eafb53fe) we disallowed
network-wide bandwidth to some network types. However, we
forgot about <portgroups/> which can have <bandwidth/> too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Move entering the job into the thread to simplify the program flow. Also
as the code holds a separate reference to the domain object some
conditions can be simplified.
After this patch qemuDomainObjTransferJob is no longer needed so this
patch removes it.
Reboot requires more sophistication and is left as a future work item --
but at least part of the plumbing is in place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If someone removes blockcopy storage file when still in mirroring phase
and then requesting blockjob abort using pivot, virsh cmd freezes. This
is not an issue with older qemu versions which did not support
asynchronous jobs (which we prefer by default).
As we have reached the mirroring phase successfully, polling monitor for
blockjob info always returns 1 and the loop never ends.
This fix introduces a check for qemuDomainBlockPivot return code, possibly
skipping the asynchronous waiting completely, if an error occurred and
asynchronous waiting was the preferred method.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1139567
Commit 86a15a25 introduced a new cpu driver API 'getModels'. Public API
allow you to pass NULL for models to get only number of existing models.
However the new code will crash with segfault so we have to count with
the possibility that the user wants only the number.
There is also difference in order of the models gathered by this new API
as the old approach was inserting the elements to the end of the array
so we should use 'VIR_APPEND_ELEMENT'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reconnect to the VM is a possibly long-running job spawned in a separate
thread. We should reload the snapshot defs and managedsave state prior
to spawning the thread to avoid blocking of the daemon startup which
would serialize on the VM lock.
Also the reloading code would violate the domain job held while
reconnecting as the loader functions don't create jobs.
Coverity pointed out that in other places we always check the return
value from virJSONValueObjectGetNumberLong() but not in the new addition
in leaseshelper. To solve the issue and also be more robust in case
somebody would corrupt the file, skip outputting of the lease entry in
case the expiry time is missing.
https://bugzilla.redhat.com/show_bug.cgi?id=1087104#c5
When trying to use an invalid offset to virStorageVolUpload(), libvirt
fails in virFDStreamOpenFileInternal(), although it seems libvirt does
not check the return in storageVolUpload(), and calls
virFDStreamSetInternalCloseCb() right after. But stream doesn't have a
privateData (is NULL) yet, and the daemon crashes then.
0 0x00007f09429a9c10 in pthread_mutex_lock () from /lib64/libpthread.so.0
1 0x00007f094514dbf5 in virMutexLock (m=<optimized out>) at util/virthread.c:88
2 0x00007f09451cb211 in virFDStreamSetInternalCloseCb at fdstream.c:795
3 0x00007f092ff2c9eb in storageVolUpload at storage/storage_driver.c:2098
4 0x00007f09451f46e0 in virStorageVolUpload at libvirt.c:14000
5 0x00007f0945c78fa1 in remoteDispatchStorageVolUpload at remote_dispatch.h:14339
6 remoteDispatchStorageVolUploadHelper at remote_dispatch.h:14309
7 0x00007f094524a192 in virNetServerProgramDispatchCall at rpc/virnetserverprogram.c:437
Signed-off-by: Luyao Huang <lhuang@redhat.com>
This patch enables the helper program to detect event(s) triggered when
there is a change in lease length or expiry and client-id. This
transfers complete control of leases database to libvirt and obsoletes
use of the lease database file (<network-name>.leases). That file will
not be created, read, or written. This is achieved by adding the option
--leasefile-ro to dnsmasq and passing a custom env var to leaseshelper,
which helps us map events related to leases with their corresponding
network bridges, no matter what the event be.
Also, this requires the addition of a new non-lease entry in our custom
lease database: "server-duid". It is required to identify a DHCPv6
server.
Now that dnsmasq doesn't maintain its own leases database, it relies on
our helper program to tell it about previous leases and server duid.
Thus, this patch makes our leases program honor an extra action: "init",
in which it sends the known info in a particular format to dnsmasq
by printing it to stdout.
The drawback of this change is that upgrade to this new approach does
not transfer the existing leases for the network if the leaseshelper
wasn't already used.
For Intel and PowerPC the implementation is calling a cpu driver
function across driver layers (i.e. from qemu driver directly to cpu
driver).
The correct behavior is to use libvirt API functionality to perform such
a inter-driver call.
This patch introduces a new cpu driver API function getModels() to
retrieve the cpu models. The currect implementation to process the
cpu_map XML content is transferred to the INTEL and PowerPC cpu driver
specific API functions.
Additionally processing the cpu_map XML file is not safe due to the fact
that the cpu map does not exist for all architectures. Therefore it is
better to encapsulate the processing in the architecture specific cpu
drivers.
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Based on previous commit, we can now precreate missing volumes. While
digging out the functionality from storage driver would be nicer, if
you've seen the code it's nearly impossible. So I'm going from the
other end:
1) For given disk target, disk path is looked up.
2) For the disk path, storage pool is looked up, a volume XML is
constructed and then passed to virStorageVolCreateXML() which has all
the knowledge how to create raw images, (encrypted) qcow(2) images,
etc.
One of the advantages of this approach is, we don't have to care about
image conversion - qemu does that for us. So for instance, users can
transform qcow2 into raw on migration (if the correct XML is passed to
the migration API).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Up 'til now, users need to precreate non-shared storage on migration
themselves. This is not very friendly requirement and we should do
something about it. In this patch, the migration cookie is extended,
so that <nbd/> section does not only contain NBD port, but info on
disks being migrated. This patch sends a list of pairs of:
<disk target; disk size>
to the destination. The actual storage allocation is left for next
commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The function queries the block devices visible to qemu
('query-block') and parses the qemu's output. The info is
returned in a hash table which is expected to be pre-filled by
qemuMonitorJSONGetAllBlockStatsInfo(). However, in the next patch
we are not going to call the latter function at all, so we should
make the former function add devices into the hash table if not
found there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While this could be exposed as a public API, it's not done yet as
there's no demand for that yet. Anyway, this is just preparing
the environment for easier volume creation on the destination.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since virDomainSnapshotFree will call virObjectUnref anyway, let's just use
that directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virInterfaceFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNWFilterFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virSecretFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStreamFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStoragePoolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStorageVolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNodeDeviceFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNetworkFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virDomainFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
virConnect.privateData is void *, so we can't access
fields of parallelsConn, pointer to which is stored in
virConnect.privateData. So replace all occurences of
conn->privateData->storageState with privconn->storageState.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Partially reverts commit 5754dbd.
The code in the specfile adds a MAC address to every <bridge>,
even for <forward mode='bridge'> for which we don't support
changing MAC addresses.
Remove it completely. For new networks, we have been adding
MAC addresses on definition/creation since the commit mentioned above.
For existing networks (pre-0.9.0), the MAC is added by this commit.
https://bugzilla.redhat.com/show_bug.cgi?id=1156367
Since our big split of libvirt.c there are only a few functions
living there. The majority was moved to corresponding subfile,
e.g. domain functions were moved to libvirt-domain.c. However,
the patches for virDomainGetFSInfo() and virDomainFSInfoFree()
introduction were posted prior the big split and merged after.
This resulted in two domain functions landing in wrong file.
Move them to the correct one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Adding non-existing nwfilter to a network interface device without any
nwfilter specified will crash libvirt daemon with segfault. The reason is
that the nwfilter is not found an libvirt will try to restore old
nwfilter configuration but there is no nwfilter specified.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The function virNetworkObjListExport() in network_conf.c had a call to
the public API virNetworkFree() which was causing a link error:
CCLD libvirt_driver_vbox_network_impl.la
./.libs/libvirt_conf.a(libvirt_conf_la-network_conf.o): In function `virNetworkObjListExport':
/home/laine/devel/libvirt/src/conf/network_conf.c:4496: undefined reference to `virNetworkFree'
This would happen when I added
#include "network_conf.h"
into domain_conf.h, then attempted to call a new function from that
file (and enum converter, similar to virNetworkForwardTypeToString())
In the end, virNetworkFree() ends up just calling virObjectUnref(obj)
anyway (after clearing all pending errors, which we probably *don't*
want to do in the cleanup of a utility function), so this is likely
more correct than the original code as well.
There is a race condition between the fopen and fscanf calls
in qemuGetProcessInfo. If fopen succeeds, there is a small
possibility that the file no longer exists before reading from it.
Now, if either fopen or fscanf calls fail, the function will behave
just as only fopen had failed.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1169055
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit id 'cb88d433' refactored the calling sequence to use a thread;
however, in doing so "lost" the check for if virNetSocketAccept returns
failure. Since other code makes that check, Coverity complains. Although
a false positive, adding back the failure check pacifies Coverity
Commit id '0d36a5d05' modified the code slightly, but removed the
return value check thus causing Coverity to complain that this call
was the only one where the return value wasn't checked. Since nothing
was done previously if there was a failure, just use ignore_value here
to pacify Coverity
Coverity complains that many other callers to return err from
virGetLastError() will check if err is not NULL before dereferencing
it. Just do the same here for safety.
Coverity complained that because the cfg->macFilter call checked
net->ifname != NULL before calling ebtablesRemoveForwardAllowIn, then
the virNetDevOpenvswitchRemovePort call should have the same check.
However, if I move the ebtables call prior to the check for TYPE_DIRECT
(where there is a VIR_FREE(net->ifname)), then it seems Coverity is
happy. Since firewall info is tacked on last during setup, removing
it in the opposite order of initialization seems to be natural anyway
https://bugzilla.redhat.com/show_bug.cgi?id=1159180
The virStoragePoolSourceFindDuplicate only checks the incoming definition
against the same type of pool as the def; however, for "scsi_host" and
"fc_host" adapter pools, it's possible that either some pool "scsi_host"
adapter definition is already using the scsi_hostN that the "fc_host"
adapter definition wants to use or some "fc_host" pool adapter definition
is using a vHBA scsi_hostN or parent scsi_hostN that an incoming "scsi_host"
definition is trying to use.
This patch adds the mismatched type checks and adds extraneous comments
to describe what each check is determining.
This patch also modifies the documentation to be describe what scsi_hostN
devices a "scsi_host" source adapter should use and which to avoid. It also
updates the parent definition to specifically call out that for mixed
environments it's better to define which parent to use so that the duplicate
pool checks can be done properly.
https://bugzilla.redhat.com/show_bug.cgi?id=1159180
Move the API from the backend to storage_conf and rename it to
virStoragePoolGetVhbaSCSIHostParent. A future patch will need to
use this functionality from storage_conf
There are some small issue in qemuProcessAttach:
1.Fix virSecurityManagerGetProcessLabel always get pid = 0,
move 'vm->pid = pid' before call virSecurityManagerGetProcessLabel.
2.Use virSecurityManagerGenLabel to get image label.
3.Fix always set selinux label for other security driver label.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
When a block{commit,copy} job was aborted on a domain, block job handler
did not process it correctly, leaving a phantom job in the background.
Any further calls to any blockjob causes "block <jobtype> still active"
error. This patch fixes the blockjob handler so that it checks not only
for VIR_DOMAIN_BLOCK_JOB_FAILED status, but VIR_DOMAIN_BLOCK_JOB_CANCELED
status as well, followed by our existing cleanup routine.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135169
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If job is failed in qemuMigrationRun, we expect the jobinfo type as
FAILED. But jobinfo type won't be updated until entering
qemuMigrationWaitForCompletion. We should make it updated in all
conditions. Moreover, we can't use qemuMigrationUpdateJobStatus
here because job may fail in libvirt, so we can't query job status
from QEMU.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
The migration job status is traced in qemuMigrationUpdateJobStatus
which is called in qemuMigrationRun. But if migration is cancelled
before the trace such as in qemuMigrationDriveMirror, the jobinfo
type won't be updated to CANCELLED. After this patch, we can get
jobinfo type CANCELLED if migration is cancelled during drive
mirror. Moreover, we can't use qemuMigrationUpdateJobStatus
because from qemu's point of view it's just the drive mirror being
cancelled and the migration hasn't even started yet.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1160084
As of b6d4dad11b (1.2.5) we are trying to keep the status of FSFreeze
in the guest. Even though I've tried to fixed couple of corner cases
(6ea54769ba), it occurred to me just recently, that the approach is
broken by design. Firstly, there are many other ways to talk to
qemu-ga (even through libvirt) that filesystems can be thawed (e.g.
qemu-agent-command) without libvirt noticing. Moreover, there are
plenty of ways to thaw filesystems without even qemu-ga noticing (yes,
qemu-ga keeps internal track of FSFreeze status). So, instead of
keeping the track ourselves, or asking qemu-ga for stale state, it's
the best to let qemu-ga deal with that (and possibly let guest kernel
propagate an error).
Moreover, there's one bug with the following approach, if fsfreeze
command failed, we've executed fsthaw subsequently. So issuing
domfsfreeze in virsh gave the following result:
virsh # domfsfreeze gentoo
Froze 1 filesystem(s)
virsh # domfsfreeze gentoo
error: Unable to freeze filesystems
error: internal error: unable to execute QEMU agent command 'guest-fsfreeze-freeze': The command guest-fsfreeze-freeze has been disabled for this instance
virsh # domfsfreeze gentoo
Froze 1 filesystem(s)
virsh # domfsfreeze gentoo
error: Unable to freeze filesystems
error: internal error: unable to execute QEMU agent command 'guest-fsfreeze-freeze': The command guest-fsfreeze-freeze has been disabled for this instance
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virReportSystemError is reserved for reporting system errors, calling it
with VIR_ERR_* error codes produces error messages that do not make any
sense, such as
internal error: guest failed to start: Kernel doesn't support user
namespace: Link has been severed
We should prohibit wrong usage with a syntax-check rule.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This reverts commit 433b427ff8.
The patch was added in order to overcome a bug in iproute2 and since it
was properly identified as a bug, particularly in openSUSE 13.2, and it
is being worked on [1], the best solution for libvirt seems to be to
keep the old behaviour.
[1] https://bugzilla.novell.com/show_bug.cgi?id=907093
Starting from libvirt-1.2.4, network state XML files moved to another
directory (see commit b9e95491) and libvirt automatically migrates the
network state files to a new location. However, the code used
dirent.d_type which is not supported by all filesystems. Thus, when
libvirt was upgraded on a host which used such filesystem, network state
XMLs were not properly moved and running networks disappeared from
libvirt.
This patch falls back to lstat() whenever dirent.d_type is DT_UNKNOWN to
fix this issue.
https://bugzilla.redhat.com/show_bug.cgi?id=1167145
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 6fcddfcd refactored job statistics but missed the jobinfo type updated
in qemuDomainGetJobInfo. After this patch, we can use virDomainGetJobInfo to
get jobinfo type again.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 'c264eeaa' didn't do the prerequisite 'make syntax-check' before
pushing. There was a <tab> in the whitespace for the comment. Replaced
with spaces and aligned.
pushed as build breaker since Jenkins complained loudly
The typical case where we had a problem is with such a filesystem
definition as created by virt-sandbox-service:
<filesystem type='bind' accessmode='passthrough'>
<source dir='/var/lib/libvirt/filesystems/mysshd/var'/>
<target dir='/var'/>
</filesystem>
In this case, we don't want to unmount the /var subtree or we may
loose the access to the source folder.
Resolving symlinks can fail before mounting any file system if one file
system depends on another being mounted. Symlinks are now resolved in
two passes:
* Before any file system is mounted, but then we are more gentle if
the source path can't be accessed
* Right before mounting a file system, so that we are sure that we
have the resolved path... but then if it can't be accessed we raise
an error.
Due to a change (or bug?) in ip link implementation, the command
'ip link add vnet0...'
is forced into
'ip link add name vnet0...'
The changed command also works on older versions of iproute2, just the
'name' parameter has been made mandatory.
Add attribute to set vgamem_mb parameter of QXL device for QEMU. This
value sets the size of VGA framebuffer for QXL device. Default value in
QEMU is 8MB so reuse it also in libvirt to not break things.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
So far we didn't have any option to set video memory size for qemu video
devices. There was only the vram (ram for QXL) attribute but it was valid
only for the QXL video device.
To provide this feature to users QEMU has a dedicated device attribute
called 'vgamem_mb' to set the video memory size. We will use the 'vram'
attribute for setting video memory size for other QEMU video devices.
For the cirrus device we will ignore the vram value because it has
hardcoded video size in QEMU.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
QEMU has two different type of QXL display device. The first "qxl-vga"
is for primary video device and second "qxl" is for secondary video
device.
There are also two different ways how to specify those devices on qemu
command line, the first one and obsolete is using "-vga" option and the
current new one is using "-device" option. The "-vga" could be used only
to setup primary video device, so the "-vga qxl" equal to
"-device qxl-vga". Unfortunately the "-vga qxl" doesn't support setting
additional parameters for the device and "-global" option must be used
for this purpose. It's mandatory to use "-global qxl-vga...." to set the
parameters of primary video device previously defined with "-vga qxl".
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The vram attribute was introduced to set the video memory but it is
usable only for few hypervisors excluding QEMU/KVM and the old XEN
driver. Only in case of QEMU the vram was used for QXL.
This patch updates the documentation to reflect current code in libvirt
and also changes the cases when we will set the default vram attribute.
It also fixes existing strange default value for VGA devices 9MB to 16MB
because the video ram should be rounded to power of two.
The change of default value could affect migrations but I found out that
QEMU always round the video ram to power of two internally so it's safe
to change the default value to the next closest power of two and also
silently correct every domain XML definition. And it's also safe because
we don't pass the value to QEMU.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There are two special cases, if the input number is 0 or the number is
larger then 2^31 (for 32bit unsigned int). For the special cases the
return value is 0 because they cannot be rounded.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Get mounted filesystems list, which contains hardware info of disks and its
controllers, from QEMU guest agent 2.2+. Then, convert the hardware info
to corresponding device aliases for the disks.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
virDomainGetFSInfo returns a list of filesystems information mounted in the
guest, which contains mountpoints, device names, filesystem types, and
device aliases named by libvirt. This will be useful, for example, to
specify mountpoints to fsfreeze when taking snapshot of a part of disks.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
As qemu is now able to notify us about change of the channel state used
for communication with the guest agent we now can more precisely track
the state of the guest agent.
To allow notifying management apps this patch implements a new event
that will be triggered on changes of the guest agent state.
Improve the monitor function to also retrieve the guest state of
character device (if provided) so that we can refresh the state of
virtio-serial channels and perhaps react to changes in the state in
future patches.
This patch changes the returned data from qemuMonitorGetChardevInfo to
return a structure containing the pty path and the state for all the
character devices.
The change to the testsuite makes sure that the data is parsed
correctly.
This patch contains three domain cleanup improvements in the migration
finish phase, ensuring a domain is properly disposed when a failure is
detected or the migration is cancelled.
The check for virDomainObjIsActive is moved to libxlDomainMigrationFinish,
where cleanup can occur if migration failed and the domain is inactive.
The 'cleanup' label was missplaced in libxlDomainMigrationFinish, causing
a migrated domain to remain in the event of an error or cancelled migration.
In cleanup, the domain was not removed from the driver's list of domains.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
During the perform phase of migration, the domain is started on
the dst host in a running state if VIR_MIGRATE_PAUSED flag is not
specified. In the finish phase, the domain is also unpaused if
VIR_MIGRATE_PAUSED flag is unset. I've noticed this second unpause
fails if the domain was already unpaused following the perform phase.
This patch changes the perform phase to always start the domain
paused, and defers unpausing, if requested, to the finish phase.
Unpausing should occur in the finish phase anyhow, where the domain
can be properly destroyed if the perform phase fails and migration
is cancelled.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Moving data reception of the perform phase of migration to a
thread introduces a race with the finish phase, where checking
if the domain is active races with the thread finishing the
perform phase. The race is easily solved by acquiring a job in
the finish phase, which must wait for the perform phase job to
complete.
While wrapping the finish phase in a job, noticed the virDomainObj
was being unlocked in a callee - libxlDomainMigrationFinish. Move
the unlocking to libxlDomainMigrateFinish3Params, where the lock
is acquired.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The libxl driver receives migration data within an IO callback invoked
by the event loop, effectively disabling the event loop while migration
occurs.
This patch moves receving of the migration data to a thread. The
incoming connection is still accepted in the IO callback, but control
is immediately returned to the event loop after spawning the thread.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Specifying an explicit path to pygrub (e.g. BINDIR "/pygrub") only works if
Xen and libvirt happen to be installed to the same prefix. A more flexible
approach is to simply specify "pygrub" which will cause libxl to use the
correct path which it knows (since it is built with the same prefix as pygrub).
This is particular problematic in the Debian packaging, since the Debian Xen
package relocates pygrub into a libexec dir, however I think this change makes
sense upstream.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
To be able to express some use cases of the RBD backing with libvirt, we
need to be able to specify a config file for the RBD client to qemu as
that is one of the commonly used options.
Some storage systems have internal support for snapshots. Libvirt should
be able to select a correct snapshot when starting a VM.
This patch adds a XML element to select a storage source snapshot for
the RBD protocol which supports this feature.
As we now have a common function to parse backing store string for RBD
backing store we can reuse it in the backing store walker so that we
don't fail on files backed by RBD storage.
This patch also adds a few tests to verify that the parsing works as
expected.
To allow reuse this non-trivial parser code in the backing store parser
this part of the command line parser needs to be split out into a
separate funciton.
Instead of splitting out various fields, pass the complete structure and
let the function pick various things of it.
As one of the callers isn't using virStorageSourcePtr to store the data,
this patch adds glue code that fills the data into a dummy
virStorageSourcePtr before calling the func.
This change will help when adding new fields that need output processing
in the future.
If there are no hosts for a storage source virStorageSourceCopy and
virStorageSourceNewFromBackingRelative would try to copy them anyways.
As the success of virStorageNetHostDefCopy is determined by returning
a pointer and malloc of 0 elements might return NULL according to the
implementation, the result of the copy function may vary.
Fix this by copying the hosts array only if there are hosts defined.
As we now have a deep copy function for struct virStorageSource add a
notice that extensions of the structure require also appropriate changes
to the virStorageSourceCopy func.
New qemu added a new event that is emitted when a virtio serial channel
is opened in the guest OS. This allows us to update the state of the
port in the output-only XML element.
This patch implements the monitor callbacks and necessary handlers to
update the state in the definition.
To track state of virtio channels this patch adds a new output-only
attribute called 'state' to the <target> element of virtio channels.
This will be later populated with the guest state of the channel.
To unify future additions that require information from "query-chardev"
rename qemuMonitorGetPtyPaths and friends to qemuMonitorGetChardevInfo
and move the allocation of the returned hash into the top level
function.
When creating a disk image snapshot the libvirt code would blindly copy
the parents label to the newly created image. This runs into problems
when you start a VM from an image hosted on NFS (or other storage system
that doesn't support selinux labels) and the snapshot destination is on
a storage system that does support selinux labels. Libvirt's code in
that case generates a different security label for the image hosted on
NFS. This label is valid only for NFS images and doesn't allow access in
case of a locally stored image.
To fix this issue libvirt needs to refrain from copying security
information in cases where the default domain seclabel is a better
choice.
This patch repurposes the now unused @force argument of
virStorageSourceInitChainElement to denote whether a copy of the
security labelling stuff should be attempted or not. This allows to
fine-control the copy operation for cases where we need to keep the
label of the old disk vs. the cases where we need to keep the label
unset to use the default domain imagelabel.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1151718
Commit c0e7022 breaks on a machine that lacks dbus headers:
In file included from util/virdbus.c:24:0:
util/virdbuspriv.h:31:3: error: unknown type name 'dbus_int16_t'
* src/util/virdbuspriv.h (DBusBasicValue): Only provide fallback
when dbus is compiled.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1152382
When libvirt create's the vport (VPORT_CREATE) for the vHBA, there isn't
enough "time" between the creation and the running of the following
backend->refreshPool after a backend->startPool in order to find the LU's.
Population of LU's happens asynchronously when udevEventHandleCallback
discovers the "new" vHBA port. Creation of the infrastructure by udev
is an iterative process creating and discovering actual storage devices and
adjusting the environment.
Because of the time it takes to discover and set things up, the backend
refreshPool call done after the startPool call will generally fail to
find any devices. This leaves the newly started pool appear empty when
querying via 'vol-list' after startup. The "workaround" has always been
to run pool-refresh after startup (or any time thereafter) in order to
find the LU's. Depending on how quickly run after startup, this too may
not find any LUs in the pool. Eventually though given enough time and
retries it will find something if LU's exist for the vHBA.
This patch adds a thread to be executed after the VPORT_CREATE which will
attempt to find the LU's without requiring the external run of refresh-pool.
It does this by waiting for 5 seconds and searching for the LU's. If any
are found, then the thread completes; otherwise, it will retry once more
in another 5 seconds. If none are found in that second pass, the thread
gives up.
Things learned while investigating this... No need to try and fill the
pool too quickly or too many times. Over the course of creation, the udev
code may 'add', 'change', and 'delete' the same device. So if the refresh
code runs and finds something, it may display it only to have a subsequent
refresh appear to "lose" the device. The udev processing doesn't seem to
have a way to indicate that it's all done with the creation processing of a
newly found vHBA. Only the Lone Ranger has silver bullets to fix everything.
