https://bugzilla.redhat.com/show_bug.cgi?id=1160995
In our config files users are expected to pass several integer values
for different configuration knobs. However, majority of them expect a
nonnegative number and only a few of them accept a negative number too
(notably keepalive_interval in libvirtd.conf).
Therefore, a new type to config value is introduced: VIR_CONF_ULONG
that is set whenever an integer is positive or zero. With this
approach knobs accepting VIR_CONF_LONG should accept VIR_CONF_ULONG
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's no need for condition of the following form:
if (str && STREQ(str, dst))
since we have STREQ_NULLABLE macro that handles NULL cases.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For historical reasons, only the first <console> element might be of targetType
serial, but we checked for other consoles of targetType serial in our post-parse
callback if and only if we knew the first console was serial, otherwise
the check was skipped.
This patch moves the check one level up, so first
the check for secondary console of type serial is performed and then the
rest of operations continue unchanged.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1170092
We now have a qemuInterfaceStartDevices() which does the final
activation needed for the host-side tap/macvtap devices that are used
for qemu network connections. It will soon make sense to have the
converse qemuInterfaceStopDevices() which will undo whatever was done
during qemuInterfaceStartDevices().
A function to "stop" a single device has also been added, and is
called from the appropriate place in qemuDomainDetachNetDevice(),
although this is currently unnecessary - the device is going to
immediately be deleted anyway, so any extra "deactivation" will be for
naught. The call is included for completeness, though, in anticipation
that in the future there may be some required action that *isn't*
nullified by deleting the device.
This patch is a part of a more complete fix for:
https://bugzilla.redhat.com/show_bug.cgi?id=1081461
The patch that added qemuInterfaceStartDevices() (upstream commit
82977058f5) had an extra conditional to
prevent calling it if the reason for starting the CPUs was
VIR_DOMAIN_RUNNING_UNPAUSED or VIR_DOMAIN_RUNNING_SAVE_CANCELED. This
was put in by the author as the result of a reviewer asking if it was
necessary to ifup the interfaces in *all* occasions (because these
were the two cases where the CPU would have already been started (and
stopped) once, so the interface would already be ifup'ed).
It turns out that, as long as there is no corresponding
qemuInterfaceStopDevices() to ifdown the interfaces anytime the CPUs
are stopped, neglecting to ifup when reason is RUNNING_UNPAUSED or
RUNNING_SAVE_CANCELED doesn't cause any problems (because it just
happens that the interface will have already been ifup'ed by a prior
call when the CPU was previously started for some other reason).
However, it also doesn't *help*, and there will soon be a
qemuInterfaceStopDevices() function which *will* ifdown these
interfaces when the guest CPUs are stopped, and once that is done, the
interfaces will be left down in some cases when they should be up (for
example, if a domain is paused and then unpaused).
So, this patch is removing the condition in favor of always calling
qemuInterfaeStartDevices() when the guest CPUs are started.
This patch (and the aforementioned patch) resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=1081461
When one domain is being undefined and at the same time started, for
example, there is a possibility of a rare problem occuring.
- Thread 1 does virDomainUndefine(), has the lock, checks that the
domain is active and because it's not, calls
virDomainObjListRemove().
- Thread 2 does virDomainCreate() and tries to lock the domain.
- Thread 1 needs to lock domain list in order to remove the domain from
it, but must unlock domain first (proper order is to lock domain list
first and the domain itself second).
- Thread 2 grabs the lock, starts the domain and releases the lock.
- Thread 1 grabs the lock and removes the domain from list.
With this patch:
- The undefining domain gets marked as "to undefine" before it is
unlocked.
- If domain is found in any of the search APIs, it's returned only if
it is not marked as "to undefine". The check is done while the
domain is locked.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1150505
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When calling virCgroupAllowAllDevices we get these invalid entries
in the device cgroup config.
b -1:-1 rw
c -1:-1 rw
Check for positive values before outputting the major and minor to
avoid that.
For host-passthrough CPU we don't honor the CPU
features specified in the XML, but we allow
outputting them via the UPDATE_CPU flag for dumpxml,
this gives user a rough idea of what features the CPU
might have.
After restoring a managedsave'd domain, the features
might end up in the live status XML (in /var/run) without
the model. This XML cannot be parsed by the daemon after
restart and the domain might disappear.
This fix skips formatting the features for HOST_PASSTHROUGH
when UPDATE_CPU is not specified, so the newly restored domains
and newly created snapshots won't be affected.
Note: this doesn't fix existing snapshots or already restored
running domains.
https://bugzilla.redhat.com/show_bug.cgi?id=1030793https://bugzilla.redhat.com/show_bug.cgi?id=1151885
A logic bug in qemuConnectGetAllDomainStats makes the code mark the
monitor as available when qemuDomainObjBeginJob fails, instead of when
it succeeds, as the correct flow requires.
This patch fixes the check and updates the code documentation
accordingly.
Broken by commit 57023c0a3a.
Signed-off-by: Francesco Romani <fromani@redhat.com>
When using qemuProcessAttach to attach a qemu process,
the DAC label is not filled correctly.
Introduce a new function to get the uid:gid from the system
and fill the label.
This fixes the daemon crash when 'virsh screenshot' is called:
https://bugzilla.redhat.com/show_bug.cgi?id=1161831
It also fixes qemu-attach after the prerequisite of this patch
(commit f8c1fb3) was pushed out of order.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Currently, MAC registration occurs during device creation, which is
early enough that, during live migration, you end up with duplicate
MAC addresses on still-running source and target devices, even though
the target device isn't actually being used yet.
This patch proposes to defer MAC registration until right before
the guest can actually use the device -- In other words, right
before starting guest CPUs.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
Some programs want to change some values for the network interfaces
configuration in /proc/sys/net/ipv[46] folders. Giving RW access on them
allows wicked to work on openSUSE 13.2+.
Reusing the lxcNeedNetworkNamespace function to tell
lxcContainerMountBasicFS if the netns is disabled. When no netns is
set up, then we don't mount the /proc/sys/net/ipv[46] folder RW as
these would provide full access to the host NICs config.
https://bugzilla.redhat.com/show_bug.cgi?id=1172015
The refactoring done as part of commit id '59446096' caused a regression
for the multi initiator IQN commit '6aabcb5b' because the sendtargets was
not done on/for the initiator IQN prior to login (or trying to disable
autologin)
Prior to that commit, the paths were essentially
virStorageBackendISCSIStartPool
virStorageBackendISCSILogin
virStorageBackendISCSIConnection
if initiatoriqn
virStorageBackendCreateIfaceIQN
Issue sendtargets
Perform --login
else
Issue sendtargets
Perform --login
After that commit:
virStorageBackendISCSIStartPool
Issue sendtargets
Call virStorageBackendISCSIConnection
If initiatoriqn
virStorageBackendCreateIfaceIQN
Perform --login
else
Perform --login
So for non initiator IQN paths, nothing changed. For the initiator path,
the --login fails as does any attempts to change autologin via "--op update
--name node.startup --value manual".
In old version of parted like parted-2.1-25, error message is shown in
stdout when printing a disk info without disk label.
Error: /dev/sda: unrecognised disk label
This line has been moved to stderr in newer version of parted. So we
should check both stdout and stderr when locating this message.
This should fix bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1172468
Signed-off-by: Hao Liu <hliu@redhat.com>
When user doesn't have read access on one of the domains he requested,
the for loop could exit abruptly or continue and override pointer which
pointed to locked object.
This patch fixed two issues at once. One is that domflags might have
had QEMU_DOMAIN_STATS_HAVE_JOB even when there was no job started (this
is fixed by doing domflags |= QEMU_DOMAIN_STATS_HAVE_JOB only when the
job was acquired and cleaning domflags on every start of the loop.
Second one is that the domain is kept locked when
virConnectGetAllDomainStatsCheckACL() fails and continues the loop when
it didn't end. Adding a simple virObjectUnlock() and clearing the
pointer ought to do.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If we want to perform some operation and domain state is not suitable
for that operation, we should report error VIR_ERR_OPERATION_INVALID.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
When PrlJob_GetRetCode sets second argument to
error value it means sdk function failed and we
must return error from getJobResultHelper.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Return error code, returned by parallels SDK from
waitJob and getJobResult, so that caller can handle
different errors.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Get cdrom devices list from parallels server in
prlsdkLoadDomains and add ability to define a domain
with cdroms.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
First, we don't need to call prlsdkApplyConfig after
creating new VM or containers, because it's done in
functions prlsdkCreateVm and prlsdkCreateCt.
No need to check, if domain exists in the list after
prlsdkAddDomain.
Also organize code, so that we can call virObjectUnlock
in one place.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
This patch replaces code, which creates domains by
running prlctl command.
prlsdkCreateVm/Ct will do prlsdkApplyConfig, because
we send request to the server only once in this case.
But prlsdkApplyConfig will be called also from
parallelsDomainDefineXML function. There is no problem with
it, parallelsDomainDefineXML will be refactored later.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Rewrite code, which applies domain configuration given
to virDomainDefineXML function to the VM of container
registered in PCS.
This code first check if there are unsupported parameters
in domain XML and if yes - reports error. Some of such
parameters are not supported by PCS, for some - it's not
obvious, how to convert them into PCS's corresponding params,
so let's put off it, and implement only basic params in
this patch.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Change domain state using parallels SDK functions instead of
prlctl command.
We don't need to send events from these functions now, becase
events handler will send them. But we still need to update
virDomainObj in privconn->domains.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Subscribe to events from parallels server. It's
needed for 2 things: to update cached domains list
and to send corresponding libvirt events.
Parallels server sends a lot of different events, in
this patch we handle only some of them. In the future
we can handle for example, changes in a host network
configuration or devices states.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Move macro parallelsDomNotFoundError to file parallels_utils.h, because
it will be used in parallels_sdk.c.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Obtain information about domains using parallels sdk instead of prlctl.
prlsdkLoadDomains functions behaves as former parallelsLoadDomains with
NULL as second parameter (name) - it fills parallelsConn.domains list.
prlsdkLoadDomain is now able to update specified domain by given
virDomainObjPtr.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1082521
Support for shared hostdev's was added in a number of commits, initially
starting with 'f2c1d9a80' and most recently commit id 'fd243fc4' to fix
issues with the initial implementation. Missed in all those changes was
the need to mimic the virSELinux{Set|Restore}SecurityDiskLabel code to
handle the "shared" (or shareable) and readonly options when Setting
or Restoring the SELinux labels.
This patch will adjust the virSecuritySELinuxSetSecuritySCSILabel to not
use the virSecuritySELinuxSetSecurityHostdevLabelHelper in order to set
the label. Rather follow what the Disk code does by setting the label
differently based on whether shareable/readonly is set. This patch will
also modify the virSecuritySELinuxRestoreSecuritySCSILabel to follow
the same logic as virSecuritySELinuxRestoreSecurityImageLabelInt and not
restore the label if shared/readonly
https://bugzilla.redhat.com/show_bug.cgi?id=1171582
When we edit a negative controller address number to a device,
some of them will auto generate a controller with invalid index
number. This will make guest disappear after restart libvirtd.
Instead of allowing negative number for controller index, we
should forbid negative number in these place (we did this before,
but after f18c02ec, virStrToLong_ui changed to allow negative
number). Therefore switch to virStrToLong_uip in these places.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Avoid leaving the domain locked on a failed ACL check in
qemuDomainMigratePerform() and qemuDomainMigrateFinish2().
Introduced in commit abf75aea24 (Add ACL checks into the QEMU driver).
The module XML::XPath is needed when building from git only (no need to
have it when building from tarball), so this patch moves the check from
specfile into bootstrap.conf.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
