Similarly to previous patch, for some types of interface domain
and host are on the same side of RX/TX barrier. In that case, we
need to set up the QoS differently. Well, swapped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497410
The comment in virNetDevTapInterfaceStats() implementation for
Linux states that packets transmitted by domain are received by
the host and vice versa. Well, this is true but not for all types
of interfaces. For instance, for macvtaps when TAP device is
hooked right onto a physical device any packet that domain sends
looks also like a packet sent to the host. Therefore, we should
allow caller to chose if the stats returned should be straight
copy or swapped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Users might have configured interface so that it's type of
network, but the corresponding network plugs interfaces into an
OVS bridge. Therefore, we have to check for the actual type of
the interface instead of the configured one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemu 2.7.0 introduces multiqueue virtio-blk(commit 2f27059).
This patch introduces a new attribute "queues". An example of
the XML:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' queues='4'/>
The corresponding QEMU command line:
-device virtio-blk-pci,scsi=off,num-queues=4,id=virtio-disk0
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Alter qemu command line generation in order to possibly add TLS for
a suitably configured domain.
Sample TLS args generated by libvirt -
-object tls-creds-x509,id=objvirtio-disk0_tls0,dir=/etc/pki/qemu,\
endpoint=client,verify-peer=yes \
-drive file.driver=vxhs,file.tls-creds=objvirtio-disk0_tls0,\
file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
file.server.type=tcp,file.server.host=192.168.0.1,\
file.server.port=9999,format=raw,if=none,\
id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
id=virtio-disk0
Update the qemuxml2argvtest with a couple of examples. One for a
simple case and the other a bit more complex where multiple VxHS disks
are added where at least one uses a VxHS that doesn't require TLS
credentials and thus sets the domain disk source attribute "tls = 'no'".
Update the hotplug to be able to handle processing the tlsAlias whether
it's to add the TLS object when hotplugging a disk or to remove the TLS
object when hot unplugging a disk. The hot plug/unplug code is largely
generic, but the addition code does make the VXHS specific checks only
because it needs to grab the correct config directory and generate the
object as the command line would do.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Introduce a function to setup any TLS needs for a disk source.
If there's a configuration or other error setting up the disk source
for TLS, then cause the domain startup to fail.
For VxHS, follow the chardevTLS model where if the src->haveTLS hasn't
been configured, then take the system/global cfg->haveTLS setting for
the storage source *and* mark that we've done so via the tlsFromConfig
setting in storage source.
Next, if we are using TLS, then generate an alias into a virStorageSource
'tlsAlias' field that will be used to create the TLS object and added to
the disk object in order to link the two together for QEMU.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add a new TLS X.509 certificate type - "vxhs". This will handle the
creation of a TLS certificate capability for properly configured
VxHS network block device clients.
The following describes the behavior of TLS for VxHS block device:
(1) Two new options have been added in /etc/libvirt/qemu.conf
to control TLS behavior with VxHS block devices
"vxhs_tls" and "vxhs_tls_x509_cert_dir".
(2) Setting "vxhs_tls=1" in /etc/libvirt/qemu.conf will enable
TLS for VxHS block devices.
(3) "vxhs_tls_x509_cert_dir" can be set to the full path where the
TLS CA certificate and the client certificate and keys are saved.
If this value is missing, the "default_tls_x509_cert_dir" will be
used instead. If the environment is not configured properly the
authentication to the VxHS server will fail.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
VM private data is cleared when the VM is turned off and also when the
VM object is being freed. Some of the clearing code was duplicated.
Extract it to a separate function.
This also removes the now unnecessary function
qemuDomainClearPrivatePaths.
Use an empty string to let qemu fill out the default.
This matches what's done in qemuBuildChrChardevStr.
https://bugzilla.redhat.com/show_bug.cgi?id=1454671
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Some values we read from the qemu monitor may be changed with the actual
state by the incoming migration. This means that we should refresh
certain things only after the migration has finished.
This is mostly visible in the cdrom tray state, which is by default
closed but may be opened by the guest OS. This would be refreshed before
qemu transferred the actual state and thus libvirt would think that the
tray is closed.
Note that this patch moves only a few obvious query commands. Others may
be moved later after individual assessment.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1463168
When the vcpu is successfully removed libvirt would remove the cgroup.
In cases when removal of the cgroup fails libvirt would report an error.
This does not make much sense, since the vcpu was removed and we can't
really do anything with the cgroup. This patch silences the errors from
cgroup removal.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1462092
The alias recorded in disk->info.alias is the alias for the frontend
device but we are interested in the backend drive. This messed up the
disk node name extraction code as qemu reports the drive alias in the
block query commands. This was broken in the node name detector
refactoring done in commit 0175dc6ea0
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1494327
Seeing a log message saying 'flags=93' is ambiguous & confusing unless
you happen to know that libvirt always prints flags as hex. Change our
debug messages so that they always add a '0x' prefix when printing flags,
and '0' prefix when printing mode. A few other misc places gain a '0x'
prefix in error messages too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some distros (see diff) chose to backport QMP support rather than rebase
to newer version of qemu. As a hack they added the string 'libvirt' to
the qemu -help output. Remove this as downstream-only hacks should be
carried by downstream and not litter upstream.
This effectively reverts commit ff88cd5905
Because qemuDomainDefCopy needs a string representation of a domain
definition, there's no reason for calling the lower level
qemuDomainDefFormatBuf API.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virDomainDefFormatInternal (called by qemuDomainDefFormatXMLInternal)
already checks for buffer errors and properly resets the buffer on
failure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Passing a NULL value for the argument secAlias to the function
qemuDomainGetTLSObjects would cause a segmentation fault in
libvirtd.
Changed code to check before dereferencing a NULL secAlias.
Signed-off-by: Ashish Mittal <ashmit602@gmail.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1448268
When migrating to a file (e.g. when doing 'virsh save file'),
couple of things are happening in the thread that is executing
the API:
1) the domain obj is locked
2) iohelper is spawned as a separate process to handle all I/O
3) the thread waits for iohelper to finish
4) the domain obj is unlocked
Now, the problem is that while the thread waits in step 3 for
iohelper to finish this may take ages because iohelper calls
fdatasync(). And unfortunately, we are waiting the whole time
with the domain locked. So if another thread wants to jump in and
say copy the domain name ('virsh list' for instance), they are
stuck.
The solution is to unlock the domain whenever waiting for I/O and
lock it back again when it finished.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1471225
Commit id '99a2d6af2' was a bit too aggressive with determining whether
the provided path was a "physical" cd-rom in order to generate a taint
message due to the possibility of some guest and host trying to control
the tray. For cd-rom guest devices backed to some VIR_STORAGE_TYPE_FILE
storage, this wouldn't be a problem and as such it shouldn't be a problem
for guest devices using some sort of block device on the host such as
iSCSI, LVM, or a Disk pool would present.
So before issuing a taint message, let's check if the provided path of
the VIR_STORAGE_TYPE_BLOCK backed device is a "known" physical cdrom name
by comparing the beginning of the path w/ "/dev/cdrom" and "/dev/sr".
Also since it's possible the provided path could resolve to some /dev/srN
device, let's get that path as well and perform the same check.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The virSocketAddrFormat() allocates the string and it's caller
responsibility to free it afterwards.
==28857== 11 bytes in 1 blocks are definitely lost in loss record 37 of 168
==28857== at 0x4C2BEDF: malloc (vg_replace_malloc.c:299)
==28857== by 0x9A81D79: strdup (in /lib64/libc-2.23.so)
==28857== by 0x5DA3BF0: virStrdup (virstring.c:902)
==28857== by 0x5D96182: virSocketAddrFormatFull (virsocketaddr.c:427)
==28857== by 0x5D95E13: virSocketAddrFormat (virsocketaddr.c:352)
==28857== by 0x5706890: qemuBuildHostNetStr (qemu_command.c:3891)
==28857== by 0x57138D3: qemuBuildInterfaceCommandLine (qemu_command.c:8597)
==28857== by 0x5713D6A: qemuBuildNetCommandLine (qemu_command.c:8699)
==28857== by 0x57176F6: qemuBuildCommandLine (qemu_command.c:10027)
==28857== by 0x5769D61: qemuProcessCreatePretendCmd (qemu_process.c:6004)
==28857== by 0x4056EC: testCompareXMLToArgv (qemuxml2argvtest.c:502)
==28857== by 0x41DF40: virTestRun (testutils.c:180)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since commit v2.2.0-199-g7ce711a30e libvirt stores an updated guest CPU
in domain's live definition and there's no need to update it every time
we want to format the definition. The commit itself tried to address
this in qemuDomainFormatXML, but forgot to fix qemuDomainDefFormatLive.
Not to mention that masking a previously set flag is only acceptable if
the flag was set by a public API user. Internally, libvirt should have
never set the flag in the first place.
https://bugzilla.redhat.com/show_bug.cgi?id=1485022
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When a user requested a domain XML description with
VIR_DOMAIN_XML_UPDATE_CPU flag, libvirt would use the host CPU
definition from host capabilities rather than the one which will
actually be used once the domain is started.
https://bugzilla.redhat.com/show_bug.cgi?id=1481309
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In the past we updated host-model CPUs with host CPU data by adding a
model and features, but keeping the host-model mode. And since the CPU
model is not normally formatted for host-model CPU defs, we had to pass
the updateCPU flag to the formatting code to be able to properly output
updated host-model CPUs. Libvirt doesn't do this anymore, host-model
CPUs are turned into custom mode CPUs once updated with host CPU data
and thus there's no reason for keeping the hacks inside CPU XML
formatters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This will be used to improve the validation for this type of devices.
The former @def parameter is renamed to @dev, leaving @def for the
virDomainDef (following the style used elsewhere).
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
The patch passes the reconnect timeout to QEMU by monitor on
chardev hotplug.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The VxHS block device will only use the newer formatting options and
avoid the legacy URI syntax.
An excerpt for a sample QEMU command line is:
-drive file.driver=vxhs,file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
file.server.type=tcp,file.server.host=192.168.0.1,\
file.server.port=9999,format=raw,if=none,id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
id=virtio-disk0
Update qemuxml2argvtest with a simple test.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Extract out the "guts" of building a server entry into it's own
separately callable/usable function in order to allow building
a server entry for a consumer with src->nhosts == 1.
Add a new virStorageNetProtocol for Veritas HyperScale (VxHS) disks
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Using the query-qmp-schema introspection - look for the 'vxhs'
blockdevOptions type.
NB: This is a "best effort" type situation as there is not a
mechanism to determine whether the running QEMU has been
built with '--enable-vxhs'. All we can do is check if the
option to use vxhs for a blockdev-add exists in the command
infrastructure which does not take that into account when
building its table of commands and options.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Documentation states:
"'offset' and 'size' represent an area which must lie entirely within
the device or file." Enforce the that the buffer lies within fully.
Commit 3956af495e broke the blockPeek API since virStorageFileRead
allocates a return buffer and fills it with the data, while the API
fills a user-provided buffer. This did not get caught by the compiler
since the API prototype uses a 'void *'.
Fix it by transferring the data from the allocated buffer to the user
provided buffer.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1491217
I don't want to mask the real problem, but one can advocate
that we should be marking graphics ports as already in use on
qemuProcessReconnect anyway, because we already know that they
are taken.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1075520
Apart from generic checks, we need to constrain netmask/prefix
length a bit. Thing is, with current implementation QEMU needs to
be able to 'assign' some IP addresses to the virtual network. For
instance, the default gateway is at x.x.x.2, dns is at x.x.x.3,
the default DHCP range is x.x.x.15-x.x.x.30. Since we don't
expose these settings yet, it's safer to require shorter prefix
to have room for the defaults.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org
https://bugzilla.redhat.com/show_bug.cgi?id=1075520
Currently, all that users can specify for an interface type of
'user' is the common attributes: PCI address, NIC model (and
that's basically it). However, some need to configure other
address range than the default one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org
The host CPU definitions reported in the capabilities XML may contain
CPU features unknown to QEMU, but the result of virConnectBaselineCPU is
supposed to be directly usable as a guest CPU definition and thus it
should only contain features QEMU knows about.
https://bugzilla.redhat.com/show_bug.cgi?id=1450317
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The filter only needs to know the CPU architecture. Passing
virQEMUCapsPtr as opaque is a bit overkill.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The implementation of virConnectBaselineCPU may be different for each
hypervisor. Thus it shouldn't really be implmented in the cpu code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
