* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in: Add
virSecretGetUsageType, virSecretGetUsageID and virLookupSecretByUsage
* python/generator.py: Mark virSecretGetUsageType, virSecretGetUsageID
as not throwing exceptions
* qemud/remote.c: Implement dispatch for virLookupSecretByUsage
* qemud/remote_protocol.x: Add usage type & ID as attributes of
remote_nonnull_secret. Add RPC calls for new public APIs
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.c, src/datatypes.h: Add usageType and usageID as
properties of virSecretPtr
* src/driver.h: Add virLookupSecretByUsage driver entry point
* src/libvirt.c: Implement virSecretGetUsageType, virSecretGetUsageID
and virLookupSecretByUsage
* src/libvirt_public.syms: Export virSecretGetUsageType, virSecretGetUsageID
and virLookupSecretByUsage
* src/remote_internal.c: Implement virLookupSecretByUsage entry
* src/secret_conf.c, src/secret_conf.h: Remove the
virSecretUsageType enum, now in public API. Make volume
path mandatory when parsing XML
* src/secret_driver.c: Enforce usage uniqueness when defining secrets.
Implement virSecretLookupByUsage api method
* src/virsh.c: Include usage for secret-list command
Convert all the secret/storage encryption APIs / wire format to
handle UUIDs in raw format instead of non-canonical printable
format. Guarentees data format correctness.
* docs/schemas/storageencryption.rng: Make UUID mandatory for a secret
and validate fully
* docs/schemas/secret.rng: Fully validate UUID
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in, Add
virSecretLookupByUUID and virSecretGetUUID. Make
virSecretGetUUIDString follow normal API design pattern
* python/generator.py: Skip generation of virSecretGetUUID,
virSecretGetUUIDString and virSecretLookupByUUID
* python/libvir.c, python/libvirt-python-api.xml: Manual impl
of virSecretGetUUID,virSecretGetUUIDString and virSecretLookupByUUID
* qemud/remote.c: s/virSecretLookupByUUIDString/virSecretLookupByUUID/
Fix get_nonnull_secret/make_nonnull_secret to use unsigned char
* qemud/remote_protocol.x: Fix remote_nonnull_secret to use a
remote_uuid instead of remote_nonnull_string for UUID field.
Rename REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING to
REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING and make it take an
remote_uuid value
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.h, src/datatypes.c: Store UUID in raw format instead
of printable. Change virGetSecret to use raw format UUID
* src/driver.h: Rename virDrvSecretLookupByUUIDString to
virDrvSecretLookupByUUID and use raw format UUID
* src/libvirt.c: Add virSecretLookupByUUID and virSecretGetUUID
and re-implement virSecretLookupByUUIDString and
virSecretGetUUIDString in terms of those
* src/libvirt_public.syms: Add virSecretLookupByUUID and
virSecretGetUUID
* src/remote_internal.c: Rename remoteSecretLookupByUUIDString
to remoteSecretLookupByUUID. Fix typo in args for
remoteSecretDefineXML impl. Use raw UUID format for
get_nonnull_secret and make_nonnull_secret
* src/storage_encryption_conf.c, src/storage_encryption_conf.h:
Storage UUID in raw format, and require it to be present in
XML. Use UUID parser to validate.
* secret_conf.h, secret_conf.c: Generate a UUID if none is provided.
Storage UUID in raw format.
* src/secret_driver.c: Adjust to deal with raw UUIDs. Save secrets
in a filed with printable UUID, instead of base64 UUID.
* src/virsh.c: Adjust for changed public API contract of
virSecretGetUUIDString.
* src/storage_Backend.c: DOn't undefine secret we just generated
upon successful volume creation. Fix to handle raw UUIDs. Generate
a non-clashing UUID
* src/qemu_driver.c: Change to use lookupByUUID instead of
lookupByUUIDString
* configure.in: Only define WITH_SECRETS if libvirtd is present
* src/Makefile.am: Only build secrets driver if WITH_SECRETS is
defined. Always add SECRET_DRIVER_SOURCES to EXTRA_DIST
Integrate with QEMU monitor to provide encryption passphrase when
starting a guest using encrypted qcow volumes
* src/qemu_driver.c (findDomainDiskEncryption,
findVolumeQcowPassphrase,
qemudMonitorSendVolumePassphrase, qemudMonitorSendCont): Send a volume
passphrase if qemu asks for it.
If the <encryption format='qcow'> element does not specify a secret
during volume creation, generate a suitable secret and add it to the
<encryption> tag. The caller can view the updated <encryption> tag
using virStorageVolGetXMLDesc().
Similarly, when <encryption format='default'/> is specified while
creating a qcow or qcow2-formatted volume, change the format to "qcow"
and generate a secret as described above.
* src/storage_encryption_conf.h (VIR_STORAGE_QCOW_PASSPHRASE_SIZE,
virStorageGenerateQcowPasphrase),
src/storage_encryption_conf.c (virStorageGenerateQcowPasphrase),
src/libvirt_private.syms: Add virStorageGenerateQcowPasphrase().
* src/storage_backend.c (virStoragegenerateQcowEncryption,
virStorageBackendCreateQemuImg): Generate a passphrase and
<encryption> when creating a qcow-formatted encrypted volume and the
user did not supply the information.
This implementation stores the secrets in an unencrypted text file,
for simplicity in implementation and debugging.
(Symmetric encryption, e.g. using gpgme, will not be difficult to add.
Because the TLS private key used by libvirtd is stored unencrypted,
encrypting the secrets file does not currently provide much additional
security.)
* include/libvirt/virterror.h, src/virterror.c (VIR_ERR_NO_SECRET): New
error number.
* po/POTFILES.in, src/Makefile.am: Add secret_driver.
* bootstrap: Use gnulib's base64 module.
* src/secret_driver.c, src.secret_driver.h, src/libvirt_private.syms:
Add local secret driver.
* qemud/qemud.c (qemudInitialize): Use the local secret driver.
Add a <secret> XML handling API, separate from the local driver, to
avoid manually generating XML in other parts of libvirt.
* src/secret_conf.c, src/secret_conf.h: New files.
* po/POTFILES.in, src/Makefile.am: Add secret_conf.
Add a VIR_SECRET_GET_VALUE_INTERNAL_CALL flag value, replacing the
originally separate libvirt_internal_call parameter. The flag is used
to differentiate external virSecretGetValue() calls from internal calls
by libvirt drivers that need to use the secret even if it is private.
* src/libvirt_internal.h Remove VIR_DOMAIN_XML_FLAGS_MASK
* src/driver.h Add VIR_SECRET_GET_VALUE_FLAGS_MASK constant and
VIR_SECRET_GET_VALUE_INTERNAL_CALL. Re-add the
VIR_DOMAIN_XML_FLAGS_MASK constant
* src/libvirt.c (virSecretGetValue): Don't allow the user to specify
internal flags.
Remove the bogus dependancy between node_device.c & storage_backend.c
by moving the virWaitForDevices into util.h where it can be shared
safely
* src/storage_backend_disk.c, src/storage_backend_logical.c,
src/storage_backend_mpath.c, src/storage_backend_scsi.c: Replace
virStorageBackendWaitForDevices with virFileWaitForDevices
* src/storage_backend.c, src/storage_backend.h: Remove
virStorageBackendWaitForDevices, virWaitForDevices
* src/util.h, src/util.c: Add virFileWaitForDevices
* configure.in: Move xmlrpc check further down after pkgconfig
is detected
* src/Makefile.am: Add missing XMLRPC_CFLAGS/LIBS to opennebula
* src/libvirt_private.syms: Add many missing exports
The interface allows qemudMonitorSendCont() to report errors that are
not overridden by its callers.
Also fix a potential infinite loop in qemuDomainCoreDump() if sending
cont repeatedly fails.
* src/qemu_driver.c (qemudMonitorSendCont): New function.
(qemudAutostartConfigs): Reset error before each call to
qemudStartVMDaemon().
(qemudInitCpus, qemudDomainResume, qemudDomainCoreDump,
qemudDomainRestore, qemudDomainMigratePerform,
qemudDomainMigrateFinish2): Use qemudMonitorSendCont().
* src/security_selinux.c: Use virReportSystemError whereever an
errno is involved
* src/qemu_driver.c: Don't overwrite error message from the
security driver
* src/security.h: Driver API for relabelling host devices
* src/security_selinux.c: Implement relabelling of PCI and USB
devices
* src/qemu_driver.c: Relabel USB/PCI devices before hotplug
Fix all thread locking bugs reported by object-locking test
case.
NB, some of the driver locking is getting too coarse. Driver
mutexes really need to be turned into RW locks instead to
significantly increase concurrency.
* src/lxc_driver.c: Fix useof driver when unlocked in the methods
lxcDomainGetInfo, lxcSetSchedulerParameters, and
lxcGetSchedulerParameters
* src/opennebula/one_driver.c: Fix missing unlock in oneDomainUndefine.
Fix use of driver when unlocked in oneDomainGetInfo,
oneGetOSType, oneDomainShutdown
* src/qemu_driver.c: Fix use of driver when unlocked in
qemudDomainSavem, qemuGetSchedulerType, qemuSetSchedulerParameters
and qemuGetSchedulerParameters
* src/storage_driver.c: Re-work storagePoolCreate to avoid bogus
lock checking warning. Re-work storageVolumeCreateXMLFrom to
remove a potential NULL de-reference & avoid bogus lock check
warnings
* src/test.c: Remove testDomainAssignDef since it break lock chekc
warnings.
* tests/object-locking.ml: Add oneDriverLock, oneDriverUnlock
and one_driver_t methods/types to allow lock checking on the
OpenNebula drivers
The algorithm is quite simple:
If the emulator matches a guest's domain:
if domain has machine type info:
check the domain's machine type info
else
check the guest's default machine type info
else if the emulator matches the guest's default emulator:
check the guest's default machine type info
The previous implementation was incorrectly falling back to the default
machine type info if the domain's machine type info didn't have an
alias.
* src/qemu_driver.c: simplify and fix qemudCanonicalizeMachine()
Currently we only probe the main qemu binary for machine types, but we
should also probe the kvm binary.
* src/qemu_conf.c: probe kvm binary machines in qemudCapsInitGuest()
We need to look at all the domain infos in guest capabilities, not
just the defaults.
In order to allow that, split out a qemudGetOldMachinesFromInfo()
from qemudGetOldMachines(). We'll make more use of it in the next
patch.
* src/qemu_conf.c: split out qemudGetOldMachinesFromInfo() from
qemudGetOldMachines()
This doesn't have any affect on the current tests because we don't have
any machine aliases in the current test data.
* src/qemu_conf.h, src/qemu_driver.c: expose qemudCanonicalizeMachine()
for the tests
* tests/qemuxml2argvtest.c: canonicalize the machine type
After the mentioned patch was applied, I noticed that
shutting down a kvm guest from inside (i.e. poweroff) caused
the guest to shutdown, but not removed from the list of
active guests. DanB pointed out that the problem is that
the virEventAddHandle() call in the qemu driver was asking
to watch for 0 events, not HANGUP | ERROR as it should. Add
these events so that shutdown works again.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
lzop was removed due to some confusion over whether it provided functional
advantages distinct from xz. This has been addressed in the mailing list post
archived at http://permalink.gmane.org/gmane.comp.emulators.libvirt/16487, and
support for lzop is re-added here.
* libvirt.spec.in: add dependancy on lzop
* src/qemu.conf: update documentation of save_image_format
* src/qemu_driver.c: re-add lzop compression option
* src/qemu_driver.c: drop lzma and lzop images compression options
as they are deprecated by xz
* libvirt.spec.in: add requires for xz/bzip2/gzip as they are needed
to implement the compression options
* src/qemu_driver.c (QEMUD_SAVE_FORMAT_LAST): Define.
(qemudSaveCompressionTypeFromString): Declare.
(qemudSaveCompressionTypeToString): Declare.
(qemudDomainSave): Use those functions rather than open-coding them.
Use "cat >> '%s' ..." in place of equivalent
"dd of='%s' oflag=append conv=notrunc ...".
* src/qemu_driver.c (enum qemud_save_formats) [QEMUD_SAVE_FORMAT_XZ]:
New member.
[QEMUD_SAVE_FORMAT_LZMA]: Mark as deprecated.
Use an explicit value for each member.
(qemudDomainSave, qemudDomainRestore): Handle the new member.
* src/qemu.conf: Mention xz, too.
* configure.in src/Makefile.am src/storage_backend.[ch]
src/storage_conf.[ch] src/storage_backend_mpath.[ch] po/POTFILES.in:
add a new module for storage multipath, it requires device-mapper
* src/xm_internal.c (xenXMDomainConfigParse): After t=strchr...
don't test *t; it's known. This was *not* detected by clang,
but I spotted it since once instance was in the vicinity of the
dead increment of "data".
* src/vbox/vbox_tmpl.c: minor bug in selecting the graphics type. if the
graphics type was desktop it was assumed that display is set for it,
and thus crashed on strdup. Also adds a number of missing OOM checks.
* src/lxc_container.c (lxcContainerMountBasicFS): Don't leak upon failure.
Add "cleanup:" label and change each post-allocation failure to
use "goto cleanup" rather than returning immediately.
* src/qemu_conf.c (qemuBuildHostNetStr): Do not remove the type_sep=','
dead store, since not having it would be a problem if we ever add a
new attribute=VAL option.
* src/esx/esx_vi.[ch]: convert esxVI_RemoteRequest_Execute() to a
simpler esxVI_Context_Execute() version, remove esxVI_RemoteRequest
and convert esxVI_RemoteResponse to esxVI_Response
* src/esx/esx_vi_methods.c: update and simplify callers to use
esxVI_Context_Execute() instead of esxVI_RemoteRequest_Execute()
* src/esx/esx_vi.[ch]: use virXPathNode*() in
esxVI_RemoteRequest_Execute() and remove
esxVI_RemoteResponse_DeserializeXPathObject*()
* src/esx/esx_vi_methods.c: update callers to use the new syntax of
esxVI_RemoteRequest_Execute()
* src/esx/esx_driver.c: add configStatus to the requested properties
to check it in esxVI_GetVirtualMachineIdentity()
* src/esx/esx_vi.[ch]: add esxVI_GetManagedEntityStatus()
and use it in esxVI_GetVirtualMachineIdentity()
* src/esx/esx_vi_types.[ch]: add VI type esxVI_ManagedEntityStatus
* src/esx/esx_driver.c: handle spaces in VMX file path and use a
virBuffer to encode spaces correctly in the resulting URL
* src/esx/esx_vi.c: include the URL in the error message in case
of a download error
* configure.in src/Makefile.am: change detection and flags
* src/phyp/phyp_driver.c src/phyp/phyp_driver.h: connection now
need to be done as part of the driver code, cleaned up by DV
* src/qemu_driver.c: Free the vm->monitor_chr field at VM shutdown.
Unlink the UNIX domain socket at VM shutdown to avoid littering
FS with old sockets
Separate the guest created QEMU monitor socket location
from the libvirtd create XML / PID data files, to improve
security separation when running QEMU non-root
* libvirt.spec.in: Leave /var/run/libvirt/qemu as root:root
* src/qemu_conf.h: Add libDir and cacheDir directory paths
* src/qemu_driver.c: Move QEMU monitor socket from
stateDir to libDir to avoid making security critical directory
accessible to QEMU guests.
* src/util.c: Delay running hook till after damonizing to
ensure pidfile is still written before changing UID/GID
* src/openvz_conf.c (openvzReadNetworkConf): Initialize "net".
Otherwise, upon openvzRead... failure, we would "goto error;"
where an uninitialized "net" could be dereferenced.
* src/test.c (testOpenVolumesForPool): Upon early virAsprintf or
virXPathNodeSet failure, "goto error" would take us to
virStorageVolDefFree(def), but with "def" not defined.
Initialize it to NULL.
* src/storage_backend.c: Include "internal.h".
(virStorageBackendCopyToFD): Mark inputvol parameter as "nonnull".
Remove test for non-NULL inputvol. Both callers ensure it's non-NULL.
* src/libvirt.c (virStoragePoolSetAutostart): Return -1 if the pool
argument is invalid, rather than "goto error" where we could dereference
that possibly-NULL "pool".
(virConnectFindStoragePoolSources): Likewise.
(virConnectNumOfDomains): Likewise.
Daniel P. Berrange spotted that the two latter functions
needed the same treatment.
* docs/schemas/domain.rng: Add <serial> element to disks
* src/domain_conf.h, src/domain_conf.c: XML parsing and
formatting for disk serial numbers
* src/qemu_conf.c: Set serial number when launching guests
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.args,
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.xml: Add
serial number to XML test
Add option to domain XML for
<memoryBacking>
<hugepages/>
</memoryBacking>
* configure.in: Add check for mntent.h
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug, src/qemu.conf
Add 'hugetlbfs_mount' config parameter
* src/qemu_conf.c, src/qemu_conf.h: Check for -mem-path flag in QEMU,
and pass it when hugepages are requested.
Load hugetlbfs_mount config parameter, search for mount if not given.
* src/qemu_driver.c: Free hugetlbfs_mount/path parameter in driver shutdown.
Create directory for QEMU hugepage usage, chowning if required.
* docs/formatdomain.html.in: Document memoryBacking/hugepages elements
* docs/schemas/domain.rng: Add memoryBacking/hugepages elements to schema
* src/util.c, src/util.h, src/libvirt_private.syms: Add virFileFindMountPoint
helper API
* tests/qemuhelptest.c: Add -mem-path constants
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: Add tests for hugepage
handling
* tests/qemuxml2argvdata/qemuxml2argv-hugepages.xml,
tests/qemuxml2argvdata/qemuxml2argv-hugepages.args: Data files for
hugepage tests
* tests/testutils.c: Run test function twice, once to prime it for
static allocations, once to count the non-static allocations.
* tests/testutilsqemu.c: Initialize variable correctl
* src/capabilities.c: Don't free machines variable upon failure
since caller must do that
* src/xm_internal.c: Add missing check for OOM in building VIF
config param
* docs/schemas/domain.rng: augment the video model with an optional
acceleration element with optional accel2d and accel3d flags
* src/domain_conf.c src/domain_conf.h: exten the virDomainVideoDef
structure with an optional accel field, virDomainVideoAccelDefParseXML
and virDomainVideoAccelDefFormat functions to parse and serialize
the structure.
Paolo Bonzini points out that in my refactoring of the code for
virDomainMigrate(), I added a check for the return value from
virDomainMigratePerform(). The problem is that we don't want to
exit if we fail, we actually want to go on and do
virDomainMigrateFinish2() with a non-0 return code to clean things
up. Remove the check.
While reproducing this issue, I also noticed that we wouldn't
always properly propagate an error message. In particular, I
found that if you blocked off the migration ports (with iptables)
and then tried the migration, it would actually fail but we would
get no failure output from Qemu. Therefore, we would think we
succeeded, and leave a huge mess behind us. Execute the monitor
command "info migrate", and look for a failure string in there
as well.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/esx/esx_util.c: esxUtil_ParseQuery() warns if a known query
parameter should be ignored due to the corresponding char/int pointer
being NULL, instead of silently ignoring it. Fix the control flow.
* src/esx/esx_vmx.c: add an extra type of addressType beside 'static'
and 'generated', 'vpx' indicates that the MAC address was generated
by a vCenter.
Calling qsort() on the disks array causes disk to be
unneccessarily re-ordered, potentially breaking the
ability to boot if the boot disk gets moved later in
the list. The new algorithm will insert a new disk as
far to the end of the list as possible, while being
ordered correctly wrt other disks on the same bus.
* src/domain_conf.c, src/domain_conf.h: Remove disk sorting
routines. Add API to insert a disk into existing list at
the optimal position, without resorting disks
* src/libvirt_private.syms: Export virDomainDiskInsert
* src/xend_internal.c, src/xm_internal.c: Remove calls to
qsort, use virDomainDiskInsert instead.
* src/qemu_driver.c: Remove calls to qsort, use virDoaminDiskInsert
instead. Fix reordering bugs when hotunplugging disks and
networks. Fix memory leak in disk/net unplug
* proxy/Makefile.am: Build storage_encryption_conf.c since its a
dependancy of domain_conf.c
* src/storage_encryption_conf.c: Disable XML parsing APis when
build under proxy
* src/test.c: Add a dummy no-op secrets driver for test suite
The if ((nlptr...)) implicitly assumes commptr != NULL (and that "buf"
starts with "cmd"). Make the assumption explicit, it will be broken in
a future patch.
* src/qemu_driver.c: Don't assume buffered monitor output echoes the
command.
The XML allows <encryption format='unencrypted'/>, this implementation
canonicalizes the internal representation so that "disk->encryption" is
non-NULL iff encryption information is available.
A domain with partial encryption information can be defined,
completeness of the information is not verified. The domain won't
start until the remaining information is added, of course.
* docs/formatdomain.html, docs/formatdomain.html.in: Document
new encryption options for disks
* docs/schemas/domain.rng: Pull in storage encryption schema
rules
* src/domain_conf.h, src/domain_conf.c: Wire up storage encryption
XML parsing/formatting APIs
Supports only virStorageVolCreateXML, not virStorageVolCreateXMLFrom.
Curiously, qemu-img does not need the passphrase for anything to create
an encrypted volume. This implementation thus does not need to touch
any secrets to work with cooperating clients. More generic passphrase
handling is added in the next patch.
* src/storage_backend.c: Request encryption when creating qcow/qcow2
files
* src/storage_backend_disk.c, src/storage_backend_fs.c,
src/storage_backend_logical.c: Refuse to create volumes with
encryption params set.
(The implementation is not very generic, but that can be very
easily rectified if/when new encryption formats appear.)
* src/storage_backend_fs.c: Probe for qcow/qcow2 encryption
algorithm field
The XML allows <encryption format='unencrypted'/>, this implementation
canonicalizes the internal representation so that "vol->encryption" is
non-NULL iff the volume is encrypted.
Note that partial encryption information (e.g. specifying an encryption
format, but not the key/passphrase) is valid, libvirt will automatically
choose value for the missing information during volume creation. The
user can read the volume XML, and use the unmodified <encryption> tag in
future operations (without having to be able to understand) its contents.
* docs/formatstorage.html, docs/formatstorage.html.in: Document
storage volume encryption options
* src/storage_conf.c, src/storage_conf.h: Hook up storage
encryption XML handling
* tests/storagevolschemadata/vol-qcow2.xml: Test case for encryption
schema changes
Define an <encryption> tag specifying volume encryption format and
format-depenedent parameters (e.g. passphrase, cipher name, key
length, key).
Currently the only defined parameter is a reference to a "secret"
(passphrase/key) managed using the virSecret* API.
Only the qcow/qcow2 encryption format, and a "default" format used to
let libvirt choose the format during volume creation, is currently
supported.
This patch does not add any users; the <encryption> tag is added in
the following patches to both volumes (to support encrypted volume
creation) and domains.
* docs/*.html: Re-generate
* docs/formatstorageencryption.html.in, docs/sitemap.html.in:
Add page describing storage encryption data format
* docs/schemas/Makefile.am, docs/schemas/storageencryption.rng:
Add RNG schema for storage encryption format
* po/POTFILES.in: Add src/storage_encryption_conf.c
* src/libvirt_private.syms: Export virStorageEncryption* functions
* src/storage_encryption_conf.h, src/storage_encryption_conf.c: Internal
helper APIs for dealing with storage encryption format
* libvirt.spec.in, mingw32-libvirt.spec.in: Add storageencryption.rng
RNG schema
* include/libvirt/virterror.h, src/virterror.c: Add VIR_WAR_NO_SECRET
* src/libvirt_private.syms, src/datatypes.h, src/datatypes.c: Type
virSecret struct definition and helper APIs
* src/driver.h: Sub-driver API definitions for secrets
* src/libvirt.c: Define new sub-driver for secrets
This patch adds a "secret" as a separately managed object, using a
special-purpose API to transfer the secret values between nodes and
libvirt users.
* docs/schemas/secret.rng, docs/schemas/Makefilem.am: Add new
schema for virSecret objects
* docs/*html: Re-generated
* docs/formatsecret.html.in, docs/sitemap.html.in: Add page
describing the virSecret XML schema
* include/libvirt/libvirt.h.in: Define the new virSecret public
API
* src/libvirt_public.syms: Export symbols for new public APIs
* mingw32-libvirt.spec.in, libvirt.spec.in: Add secret.rng to
files list
Per prior discussion -- this was, indeed, trivial.
I'm a little disappointed to be breaking the ordering characteristics of
the enum (as it had been ordered by increasing time requirements and
decreasing output size), but breaking any save files with the old
constants in the headers would of course be worse.
>From 2a9cdcfc88de091a8d34aa3fc3b1208d7681790e Mon Sep 17 00:00:00 2001
From: Charles Duffy <Charles_Duffy@dell.com>
Date: Fri, 28 Aug 2009 11:49:54 -0500
Subject: [PATCH] support lzop save compression for qemu
One of the larger disincentives towards use of compression for migrated-out save
files is performance impact. This patch adds support for lzop; CPU time for
compression is about 5x faster than gzip (the next most performant algorithm)
and decompression is about 3x faster.
Signed-off-by: Charles Duffy <Charles_Duffy@dell.com>
Signed-off-by: Chris Lalancette <clalance@redhat.com>
All of the other drivers that support the getMaxVcpus callback
also accept a NULL value for type. Make openvz also accept a
NULL value.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
qemudExtractMonitorPath() was doing a VIR_ALLOC_N followed by a
strncpy. However, this isn't necessary; we can do the same thing
using strndup, which is much safer.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The documentation for virNodeGetCellsFreeMemory claims the values
returned are in kilobytes, but that's actually wrong; the value
returned is actually in bytes. Fix up the documentation to be
correct.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
S-expression containing empty lists, e.g. (cpus (() () () ())),
was not being handled properly in sexpr2string() serialization.
Emit an empty list when encountering NIL sexpr kind.
* src/remote_internal.c: Split remoteAuthPolkit into separate
impls for v0 and v1 to avoid compile warnings due to unused
variables/params
* qemud/remote.c: Remove accidental tabs
* configure.in: Check for pkcheck which indicates new policykit
* qemud/Makefile.am: Install different versions of policy
* qemud/libvirtd.policy: Rename to libvirtd.policy-0
* qemud/libvirtd.policy-1: new style policy
* qemud/qemud.c, qemud/qemud.h, qemud/remote.c: Support new
policykit API via external pkcheck helper
* src/remote_internal.c: Don't prompt for polkit auth with new
policykit API
* libvirt.spec.in: deal with new policy install locations & deps
Matthias correctly points out that escape_specialcharaters() takes a
length, and since we are now malloc()'ing string in phypOpen instead of
making it a static array, we can't use sizeof(string) anymore. Calculate
the proper strlen and then use that both to allocate the string and also
pass it to escape_specialcharacters().
Signed-off-by: Chris Lalancette <clalance@redhat.com>
I came across this line in the phypOpen function:
char string[strlen(conn->uri->path)];
Here the path part of the given URI is used without checking it for
NULL, this can cause a segfault as strlen expects a string != NULL.
Beside that uuid_db and connection_data leak in case of an error.
In this line
conn->uri->path = string;
the original path of the URI leaks. The patch adds a VIR_FREE call
before setting the new path.
The attached patch is compile-tested but I don't have a Power
Hypervisor installation at hand to test it for real.
Matthias
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Fix up a small memory leak pointed out by DanB; I was forgetting
to release memory allocated to driver->saveImageFormat.
Also add the "save_image_format" and "security" entries to
the augeas lens.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
https://bugzilla.redhat.com/517371
Matt Booth points out that if you use a non-existent bridge name when
start a guest you get a weird error message:
Failed to add tap interface 'vnet%d' to bridge 'virbr0'
and dev='vnet%d' appears in the dumpxml output.
Fix that by not including 'vnet%d' in the error message and freeing the
'vnet%d' string if adding the tap device to the bridge fails.
* src/qemu_conf.c, src/uml_conf.c: fix qemudNetworkIfaceConnect()
and umlConnectTapDevice() to not expose 'vnet%d' to the user
As we start/shutdown guests, or hotplug/hot-unplug devices, we can add
or delete devices as appropriate from a list of active devices.
Then, in pciReset(), we can use this to determine whether its safe to
reset a device as a side effect of resetting another device.
* src/qemu_conf.h: add activePciHostdevs to qemud_driver
* src/qemu_driver.c: maintain the activePciHostdevs list, and pass it
to pciResetDevice()
* src/pci.[ch]: pass the activeDevs list to pciResetDevice() and use
it to determine whether a Secondary Bus Reset is safe
The qemuPrepareHostDevices() and qemuDomainReAttachHostDevices()
functions are clutter with a bunch of calls to pciGetDevice() and
pciFreeDevice() obscuring the basic logic.
Add a pciDeviceList type and add a qemuGetPciHostDeviceList() function
to build a list from a domain definition. Use this in prepare/re-attach
fto simplify things and eliminate the multiple pciGetDevice calls.
This is especially useful because in the next patch we need to iterate
the hostdevs list a third time and we also need a list type for keeping
track of active devices.
* src/pci.[ch]: add pciDeviceList type and also a per-device 'managed'
property
* src/libvirt_private.syms: export the new functions
* src/qemu_driver.c: add qemuGetPciHostDeviceList() and re-write
qemuPrepareHostDevices() and qemuDomainReAttachHostDevices() to use it
Newer versions of QEMU accept 'pci_add auto', but older versions require
'pci_add pci_addr=auto'
* src/qemu_driver.c: use pci_addr= in qemudDomainAttachHostPciDevice()
for older versions of QEMU
When we hot-unplug a PCI host device from a guest, we should reset it.
Both managed and unmanaged devices should be reset, but only managed
devices should be re-attached.
* src/qemu_driver.c: reset devices in qemudDomainDetachHostPciDevice()
Right now we're only resetting managed devices before hotplug, but we
should reset them irrespective of whether they are managed.
* src/qemu_driver.c: reset all PCI hostdevs before hotplug
It turns out that the previous attempt at this doesn't work well
in the case of hotplug. We need qemuCheckPciHostDevice() to
disallow the reset affecting devices already attach to the guest,
but we still need to avoid double locking the virDomainObjPtr.
This is all getting messy, I've a better idea.
This reverts commit 6318808270 and
c106c8a18c.
* src/qemu_driver.c, src/pci.[ch], src/xen_unified.c,
src/libvirt_private.syms: revert a bunch of stuff.
The current code makes a poor effort at updating the device arrays after
hot-unplug. Fix that and combine the two code paths into one.
* src/qemu_driver.c: fix list updating in qemudDomainDetachNetDevice(),
qemudDomainDetachPciDiskDevice() and qemudDomainDetachHostPciDevice()
Maybe it's just me, but I try to select an item from the tree using
double-click and get annoyed when "+-" gets included in the selection.
* src/virsh.c: add a space between "+-" and the node device name
in 'virsh nodedev-list --tree'
Currently the reference counting for connections is busted. I
first noticed it while trying to use virConnectRef; it would
eventually cause a crash in the remote_internal driver, although
that was really just a victim. Really, we should only call the
close callbacks on the methods when the references drop to 0. To
accomplish this, move all of the close callbacks into
virUnrefConnect (since there are lots of internal users of that
function), and arrange for virConnectClose to call that.
V2: Make sure to drop the connection lock before we call the close
callbacks, otherwise we could deadlock the daemon
V3: Fix up a crash when we got an error from one of the drivers
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/domain_conf.c: Make virDomainObjListFree a no-op if list
is NULL
* src/domain_event.c: make virDomainEventCallbackListFree a no-op
if event list is NULL
* src/lxc_driver.c: Log a message if LXC driver does not startup
due to lacking kernel support
Implement a compressed save image format for qemu. While ideally
we would have the choice between compressed/non-compressed
available to the libvirt API, unfortunately there is no "flags"
parameter to the virDomainSave() API. Therefore, implement this
as a qemu.conf option. gzip, bzip2, and lzma are implemented, and
it should be very easy to implement additional compression
methods.
One open question is if/how we should detect the compression
binaries. One way to do it is to do compile-time setting of the
paths (via configure.in), but that doesn't seem like a great thing
to do. My preferred solution is not to detect at all;
when we go to run the commands that need them, if they
aren't available, or aren't available in one of the standard paths,
then we'll fail. That's also the solution implemented in this patch.
In the future, we'll have a more robust (managed) save/restore API,
at which time we can expose this functionality properly in the API.
V2: get rid of redundant dd command and just use >> to append data.
V3: Add back the missing pieces for the enum and bumping the save version.
V4: Make the compressed field in the save_header an int.
Implement LZMA compression.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
If a PCI device reset causes other devices to be reset, allow it so long
as those other devices are note assigned to another active domain.
Note, we need to take the driver lock qemudNodeDeviceReset() because the
check function will iterate over the domain list.
* src/qemu_conf.c: add qemuCheckPciHostDevice() to iterate over active
domains checking whether the affected device is assigned
* src/pci.[ch]: add pciDeviceEquals() helper
When using a Secondary Bus Reset, all devices on the bus are reset.
Extend the pciResetDevice() API so that a 'check' callback can be
supplied which will verify that it is safe to reset the other devices
on the bus.
The virDomainObjPtr parameter is needed so that when the check function
iterates over the domain list, it can avoid double locking.
* src/pci.[ch]: add a 'check' callback to pciResetDevice(), re-work
pciIterDevices() to pass the check function to the iter functions,
use the check function in the bus iterator, return the first unsafe
device from pciBusCheckOtherDevices() and include its details in
the bus reset error message.
* src/qemu_driver.c, src/xen_uninified.c: just pass NULL as the
check function for now
Currently, if we are unable to reset a PCI device we return a fairly
generic 'No PCI reset capability available' error message.
Fix that by returning an error from the individual reset messages and
using that error to construct the higher level error mesage.
* src/pci.c: set errors in pciTryPowerManagementReset() and
pciTrySecondaryBusReset() on failure; use those error messages
in pciResetDevice(), or explain that no reset support is available
When the guest shuts down, we should attempt to restore all PCI host
devices to a sane state.
In the case of managed hostdevs, we should reset and re-attach the
devices. In the case of unmanaged hostdevs, we should just reset them.
Note, KVM will already reset assigned devices when the guest shuts
down using whatever means it can, so we are only doing it to cover the
cases the kernel can't handle.
* src/qemu_driver.c: add qemuDomainReAttachHostDevices() and call
it from qemudShutdownVMDaemon()
It turns out that a PCI Power Management reset only affects individual
functions, and not the whole device.
The PCI Power Management spec talks about resetting the 'device' rather
than the 'function', but Intel's Dexuan Cui informs me that it is
actually a per-function reset.
Also, Yu Zhao has added pci_pm_reset() to the kernel, and it doesn't
reject multi-function devices, so it must be true! :-)
(A side issue is that we could defer the PM reset to the kernel if we
could detect that the kernel has PM reset support, but barring version
number checks we don't have a way to detect that support)
* src/pci.c: remove the pciDeviceContainsOtherFunctions() check from
pciTryPowerManagementReset() and prefer PM reset over bus reset
where both are available
Cc: Cui, Dexuan <dexuan.cui@intel.com>
Cc: Yu Zhao <yu.zhao@intel.com>
PCI device assignment is only supported in KVM's fork of qemu, so we
should really detect its availability and give a nice error if its
not supported.
* src/qemu_conf.[ch]: introduce QEMUD_CMD_FLAG_PCIDEVICE indicating
that the -pcidevice command line option is available
* tests/*: update the tests
Attaching a host PCI device to a qemu guest is done with a
straightforward 'pci_add auto host host=XX:XX.X' command.
Like with NIC and disk hotplug, we need to retain the guest PCI address
assigned by qemu so that we can use it for hot-unplug.
Identifying a device for detach is done using the host PCI address.
Managed mode is handled by detaching/resetting the device before
attaching it to the guest and re-attaching it after detaching it from
the guest.
* src/qemu_driver.c: add qemudDomainAttachHostPciDevice() and
qemudDomainDetachHostPciDevice()
* src/domain_conf.h: add somewhere to store the guest PCI address
* src/domain_conf.c: handle formatting and parsing the guest PCI
address
Re-factor the hostdev hotplug code so that we can easily add PCI
hostdev hotplug to qemudDomainAttachHostDevice().
* src/qemu_driver.c: rename qemudDomainAttachHostDevice() to
qemudDomainAttachHostUsbDevice(); make qemudDomainAttachHostDevice()
handle all hostdev types
* src/libvirt_private.syms: export a couple of hostdev related
ToString() functions
Some kernel versions expose broken NUMA topology for some machines.
This causes the LXC/UML drivers to fail to start. QEMU driver was
already fixed for this problem
* src/lxc_conf.c: Log and ignore failure to populate NUMA info
* src/uml_conf.c: Log and ignore failure to populate NUMA info
* src/capabilities.c: Reset nnumaCell to 0 after freeing
A couple of minor fixes to phyp escape_specialcharacters. Make it
a static function (since it's only used in phyp/phyp_driver.c), and
make it take a dstlen parameter. This paves the way for removing
strncpy in the future.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Minor fix to openvzGetVPSUUID to make it take a length parameter.
This ensures that it doesn't make assumptions about the length
of the UUID buffer, and paves the way for removal of strncpy in
the future.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
As of qemu 0.10.6, qemu now honors the -S flag on incoming migration.
That means that when the migration completes, we have to issue a
'cont' command to get the VM running again. We do it unconditionally
since it won't hurt on older qemu.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Re-factor virDomainMigrate to split out the version 1 and version 2
protocols into their own functions. In reality, the two versions share
very little in common, so forcing them together in the same function was
just confusing. This will also make adding tunnelled migration easier.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When doing a restore, we were forgetting to update the state file
for the VM. That means that if you do a save/restore, then shut
down libvirtd, then start it back up, you'll see the state of the
guest as "paused", even though it is really running. We were
just forgetting a "virDomainSaveStatus" call in the restor path.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
If the ipv6 kernel module is not loaded, then we get this when starting
a virtual network:
libvir: Network Config error :
cannot enable /proc/sys/net/ipv6/conf/virbr0/disable_ipv6:
No such file or directory
If disable_ipv6 is not present, we should just merrily continue on our
way.
* src/network_driver.c: make networkDisableIPV6() not fail if the kernel
has no ipv6 support
If we're running qemu unprivileged, we need to chown any supplied kernel
or initrd before spawning it.
* src/qemu_driver.c: rename qemuDomainSetDiskOwnership() to
qemuDomainSetFileOwnership(), pass it a path string instead of a disk
definition and use it for chowning the kernel/initrd in
qemuDomainSetAllDeviceOwnership()
While trying to remove uses of unsafe strncpy in the tree, I came
across a couple of usages in the ESX driver. To my eyes, the snprintf
replacements do the same thing in less code, and are also safer.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Tested-by: Mattias Bolte <matthias.bolte@googlemail.com>
* src/logging.c src/logging.h src/libvirt_private.syms:
define new functions virLogSetFromEnv and virLogParseDefaultPriority
* qemud/qemud.c src/libvirt.c tests/eventtest.c: cleanup to use the
unified functions
* qemud/qemud.c src/logging.[ch]: Similar as for general libvirt, don't
convert high priority levels to debug level. Ignore LIBVIRT_LOG_FILTERS
and LIBVIRT_LOG_OUTPUTS when they're set to the empty string, otherwise
they can override a valid setting from the config file. Send all
settings through the parser functions for validation, so that the
existence of a bad setting doesn't nullify a good setting that should
have applied -- particularly the default output. Keep the order of
precedence consistent for all variables between the environment and
the config file. Warn when an invalid log level, filter, or output
is ignored.
* src/libvirt_private.syms: export internally a few convenience functions
* src/libvirt.c src/logging.c: Don't convert high priority levels to the
debug level. Don't parse LIBVIRT_LOG_FILTERS and LIBVIRT_LOG_OUTPUTS
when they're set to the empty string. Warn when the user specifies an
invalid value (empty string remains a noop).
* po/POTFILES.in: src/logging.c now include translatable strings
* src/xm_internal.c: in case of multiple connections to the xen driver
and some clients were not using domain events, the whole /etc/xen
monitoring would break leading to disapearing domains.
* src/esx/esx_driver.c src/esx/esx_vi.[ch] src/esx/esx_vmx.[ch]:
adds version checking for GSX 2.0, allows to pass a specific port
for the connection and also add a new specific gsx scheme for
easier connections to GSX hosts
Fix up qemudDomainMigratePrepare2 to use virGetHostname instead of
gethostname. Besides the fact that virGetHostname is far more clever,
there was a latent bug in the handling that could cause a buffer overflow
on a very long hostname.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* autobuild.sh, mingw32-libvirt.spec.in: Enable esx on mingw32
* src/esx/esx_driver.c: Define AI_ADDRCONFIG if not set
* src/esx/esx_util.c, src/esx/esx_vi_types.c: Always use
%lld & friends, since gnulib guarentees we have these
and not the target's own variants
If the bridge device is configured to have IPv6 address and
accept router advertisments, then a malicious guest can send
out bogus advertisments and hijack/DOS host IPv6 connectivity
* src/network_driver.c: Set accept_ra=0, disable_ipv6=1, autoconf=0
for IPv6 sysctl on virual network bridge devices
PCIe DevCap register is actually 32 bits, not 16 bits. Since FLR is
bit 28, we clearly are failing to detect FLR support.
Known to fix device reset with some SR-IOV devices.
* src/pci.c: fix pciDetectFunctionLevelReset()
* src/util.c: Don't drop capabilities until after the PID file has
been written. Kill off child if writing the PID file fails
* src/qemu_driver.c: Remove bogus trailing '/' in state dir
* esx/esx_driver.c: add some documentation about the CPU scheduler
parameters and remove some old, unnecessary compensation code, since
virsh uses the proposed parameter types now.
* src/qemu_driver.c: fix qemudOpenMonitorUnix() to retry on ENOENT
instead of EACCES which is the error one receive when the socket
error hasn't shown up yet
In order to hotplug a network/bridge backed NIC, we need to first create
the tap file descriptor, add the tap interface to the bridge and then
pass the file descriptor to the qemu process using the 'getfd' monitor
command.
Once the tapfd has been accepted, we create the network backend using
host_net_add, supplying the name assigned to the tapfd. If this fails,
we need to close the tapfd in qemu using the 'closefd' monitor command.
If the version of qemu does not support the getfd/closefd monitor
commands we detect "unknown command" in the getfd reply and fail the
attach operation.
* src/qemu_driver.c: add support for tapfd based hotplug in
qemudDomainAttachNetDevice()
Add qemudMonitorCommandWithFd() which allows a file descriptor to be
sent to qemu over a unix monitor socket using SCM_RIGHTS. See the
unix(7) and cmsg(3) man pages.
* src/qemu_conf.c: add a scm_fd param to qemudMonitorCommandExtra(),
add qemudMonitorCommandWithFd(), implement SCM_RIGHTS support in
qemudMonitorSendUnix()
Switch from using write() to using sendmsg() on QEMU's monitor socket
so that we can add support for SCM_RIGHTS.
* src/qemu_driver.c: add sendmsg() based qemudMonitorSendUnix() and use
it when the monitor fd is a unix socket
Add a little helper function to write the monitor command followed by
carriage return in a single write.
This doesn't make any real difference, but allows us to more easily
switch to using sendmsg() when using the monitor over a unix socket.
* src/qemu_conf.c: split qemudMonitorSend() out
In subsequent patches we're going to have a file descriptor to close
too, so centralize the error handling cleanups to make things easier.
* src/qemu_conf.c: in qemudDomainAttachNetDevice() consolidate the
error handling cleanups together
With hotplug, we're going to want to pass a tapfd name rather than an
actual file descriptor, so prepare the way by passing a string tapfd to
qemuBuildHostNetStr().
* src/qemu_conf.h: qemuBuildHostNetStr() takes a string tapfd now
* src/qemu_conf.c: pass qemuBuildHostNetStr() a string rather than an
actual file descriptor
* src/qemu_driver.c: update qemudDomainAttachNetDevice() for change
* src/qemu_conf.h: export qemudNetworkIfaceConnect()
* src/qemu_conf.c: move vnet_hdr logic into qemudNetworkIfaceConnect()
since we need it for hotplug too
By probing for qemu machine types, we increased the time of a
GetCapabilities call from 100us to a whopping 60ms.
This patch takes the approach of only probing for machine types
when the mtime of the emulator binary changed since the last time
the capabilities were generated.
* src/capabilities.h: cache the emulator binary mtime
* src/qemu_conf.c: add qemudGetOldMachines() to copy the machine
types from the old caps struct if the mtime for the binary hasn't
changed
* src/qemu_conf.h, src/qemu_driver.c: pass the old caps pointer to
qemudCapsInit()
e.g. <machine canonical='pc'>pc-0.11</machine>
* src/capabilities.c: output the canonical machine names in the
capabilities output, if available
* docs/schemas/capabilities.rng: add the new attribute
Not all possible emulators are actually in the capabilities, so if we
don't find the supplied emulator we should probe it directly for machine
types.
* src/qemu_driver.c: add qemudCanonicalizeMachineDirect() to directly
probe an emulator for the canonical machine type
In qemu-0.11 there is a 'pc-0.10' machine type which allows you to run
guests with a machine which is compatible with the pc machine in
qemu-0.10 - e.g. using the original PCI class for virtio-blk and
virtio-console and disabling MSI support in virtio-net. The idea here
is that we don't want to suprise guests by changing the hardware when
qemu is updated.
I've just posted some patches for qemu-0.11 which allows libvirt to
canonicalize the 'pc' machine alias to the latest machine version.
This patches makes us use that so that when a guest is configured to
use the 'pc' machine type, we resolve that to 'pc-0.11' machine and
save that in the guest XML.
See also:
https://fedoraproject.org/wiki/Features/KVM_Stable_Guest_ABI
* src/qemu_conf.c: add qemudCanonicalizeMachine() to canonicalize
the machine type according to the machine aliases in capabilities
* src/qemu_driver.c: parse aliases in qemudParseMachineTypesStr()
A subsequent commit will add a "canonical" field to this structure,
this patch basically just prepares the way for that.
The new type is added, along with virCapabilitiesAlloc/FreeMachines()
helpers and a whole bunch of code to make the transition.
One quirk is that virCapabilitiesAddGuestDomain() and
virCapabilitiesAddGuest() take ownership of the machine list rather
than duping it. This makes sense to avoid needless copying.
* src/capabilities.h: add the virCapsGuestMachine struct and use it
in virCapsGuestDomainInfo, add prototypes for new functions and
update the AddGuest() prototypes
* src/capabilities.c: add code for allocating and freeing the new
type, change the machines parameter to AddGuest() etc.
* src/libvirt_private.syms: export the new helpers
* src/qemu_conf.c: update all the machine type code to use the new
struct
* src/xen_internal.c: ditto
* tests/testutilsqemu.c: ditto
Currently we hardcode the QEMU machine types. We should really just
parse the output of 'qemu -M ?' so the lists don't get out of sync.
xenner doesn't support '-M ?', so we still need to hardcode that.
The horrible (const char *const *) is removed in a subsequent patch.
* src/qemu_conf.c: kill the arch_info*machines tables, retain the
hardcoded xenner machine type, add qemudProbeMachineTypes() to
run and parse 'qemu -M ?' and use it in qemudCapsInitGuest()
There's no need for the hasbase/hasaltbase confusion, just store the
first binary path found in a variable.
* src/qemu_conf.c: kill hasbase/hasaltbase logic in qemudCapsInitGuest()
* src/esx/esx_driver.c src/esx/esx_vi.c src/esx/esx_vi.h
src/esx/esx_vmx.c src/esx/esx_vmx.h: extend the VI API version checks
to accept version 4.0 and takes care of the virtualHW.version change
from 4 to 7.
* src/esx/esx_driver.c src/esx/esx_util.c src/esx/esx_util.h
src/esx/esx_vi.c src/esx/esx_vi.h: adds a no_verify query parameter to
stop libcurl from verifying theserver certificate for the https
transport.
Do the check in libvirt.c, to save drivers from the burden. This changes
behavior slightly in the qemu driver: we no longer explictly error if
passed an empty string. An error will still be thrown when the device
lookup fails.
* src/vbox/vbox_driver.c: remove some old 2.5 switches and plug the
3.0 driver
* src/vbox/vbox_V3_0.c src/vbox/vbox_CAPI_v3_0.h: the driver for
VirtualBox 3.0
* src/vbox/vbox_tmpl.c: handle the new driver and add event support
* src/Makefile.am: plug in the new module
Features supported:
- Connects to HMC/VIOS or IVM systems.
- Life cycle commands (resume and shutdown).
- dumpxml
- 'list' and 'list --all'
What is being implemented:
- better and centralized control for UUID
- definexml
- CPU management commands
* src/domain_conf.c src/domain_conf.h: first version of the driver
* configure.in src/Makefile.am include/libvirt/virterror.h
src/domain_conf.[ch] src/libvirt.c src/virterror.c: glue the driver
in the general framework
* src/esx/esx_*.[ch]: the driver, uses a remote minimal SOAP client
to talk to the VI services on ESX nodes.
* configure.in include/libvirt/virterror.h src/Makefile.am src/driver.h
src/libvirt.c src/virterror.c: glue in the new driver
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug,
src/qemu.conf: Add 'cgroups_controllers' and 'cgroups_device_acl'
parameters
* src/qemu_conf.h, src/qemu_conf.c: Load & parse configuration params
for cgroups
* src/qemu_driver.c: Only use cgroups controllers that are activated,
and use configured device whitelist instead of default, if set.
* src/qemu_driver.c: Set a restrictive block device whitelist for
all QEMU guests. Update whitelist when hotplugging disks.
* src/cgroup.h, src/cgroup.c: Add some more convenience methods
for dealing with block device whitelists.
* src/qemu_driver.c: Add driver methods qemuGetSchedulerType,
qemuGetSchedulerParameters, qemuSetSchedulerParameters
* src/lxc_driver.c: Fix to use unsigned long long consistently
for schedular parameters
* src/cgroup.h, src/cgroup.c: Fix cpu_shares to take unsigned
long long
* src/util.c, src/util.h, src/libvirt_private.syms: Add a
virStrToDouble helper
* src/virsh.c: Fix handling of --set arg to schedinfo command
to honour the designated data type of each schedular tunable
as declared by the driver
Allow the driver level cgroup to be managed explicitly by the
hypervisor drivers, in order to detect whether to enable or
disable cgroup support for domains. Provides better error
reporting of failures. Also allow for creation of cgroups for
unprivileged drivers if controller is accessible by the user.
* src/cgroup.c, src/cgroup.h: Add an API to obtain a driver cgroup
* src/lxc_conf.h, src/lxc_controller.c, src/lxc_driver.c:
Obtain a driver cgroup at startup and use that instead of
re-creating everytime.
* src/util.c, src/util.h, src/libvirt_private.syms: Add a
virGetUserName() helper
* src/cgroup.c: Detect the mount location of every controller at
time a virCgroupPtr is created. Detect current process' placement
within group to avoid assuming it is in the root. Pass controller
ID into SetValueStr/GetValueStr to enable much duplicated code to
be eliminated
* src/datatypes.c src/domain_conf.c src/interface_conf.c
src/lxc_driver.c src/qemu_driver.c src/storage_backend.c src/virsh.c:
add bare %s format string to printf-derivatives called with no format
string
GCC >= 4.4 assumes the 'printf' attribute refers to the native
runtime libraries format specifiers. Thanks to gnulib, libvirt
has GNU format specifiers everywhere. This means we need to
use 'gnu_printf' with GCC >= 4.4 to get correct compiler
checking of printf format specifiers.
* HACKING: Document new rules for ATTRIBUTE_FMT_PRINTF
* autobuild.sh, mingw32-libvirt.spec.in: Disable OpenNebula
driver on mingw32 builds
* qemud/dispatch.h, qemud/qemu.h, src/buf.h src/internal.h,
src/logging.h, src/security.h, src/sexpr.h, src/util.h,
src/virterror_internal.h, src/xend_internal.c: Change
over to ATTRIBUTE_FMT_PRINTF.
* src/virsh.c: Disable 'cd' and 'pwd' commands on Win32
since they don't compile
* src/threads-win32.c: Add missing return value check
If the qemu binary supports "-no-kvm" and/or "-no-kqemu", they should
always be added for plain "qemu" domains. Previously, we omitted them
whenever the host and guest architectures implied that they would be
disabled automatically, but that logic was flawed in some cases
(such as i686 and x86_64).
* src/qemu_conf.c: fix the conditions for adding "-no-kvm" and/or "-no-kqemu"
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in: adds the new
flag VIR_MEMORY_PHYSICAL for virDomainMemoryPeek
* src/libvirt.c: update the front-end checking
* src/qemu_driver.c: extend the QEmu driver
* src/datatypes.c: fix a lock problem on error handling, as the
error report takes the lock, it must be released before, fixes
the problem but just for Interface objects
qemu network devices are hot-unplugged in two stages - first the PCI NIC
is removed using 'pci_del <pci_addr>' and then the backend is removed
using 'host_net_remove <vlan> <name>'.
In order to perform these operations we need to have retained the
PCI address, backend name and vlan number.
* src/qemu_driver.c: add qemudDomainDetachNetDevice()
When we pci_add a NIC, we need to retain the PCI address assigned by
qemu for using during detach.
* src/qemu_driver.c: use qemudParsePciAddReply() to pull the PCI
address from the pci_add reply
* src/domain_conf.c: handle storing and parsing the PCI address in the
domain state XML file
The current code for parsing pci_add replies ignores the the domain and
bus numbers. Re-write the code to rectify that.
Also, since pci_add is used for NIC hotplug as well ask disk hotplug,
re-factor the code into a separate function.
* src/qemu_driver.c: add qemudParsePciAddReply() function which can
handle parsing domain and bus numbers
If we fail to pci_add a NIC, we should remove the network backend and
leave things the way we found them. To do that, we pre-allocate a
host_net_remove monitor command and issue that if the pci_add fails.
If the remove fails, we just log a warning.
We can only do this if we have a name for the network backend and
we know the vlan number its associated with.
* src/qemu_driver.c: host_net_remove the network backend if the
pci_add fails
Implement basic NIC hotplug support using the 'host_net_add' and
'pci_add' qemu monitor commands.
For now, we don't support 'bridge' or 'network' types.
Also, if pci_add fails, we currently fail to remove the backend
which we added.
Finally, NIC hot-unplug support is missing.
* src/qemu_driver.c: add qemudDomainAttachNetDevice()
* src/qemu_conf.[ch]: export qemuBuildNicStr(), qemuBuildHostNetStr()
and qemuAssignNames()
* src/libvirt_private.syms: export virDomainNetTypeToString()
qemudDomainChangeEjectableMedia() currently extracts the qemu command
line flags, but other device attaching code might need it, so move
the qemudExtractVersionInfo() call up a frame.
* src/qemu_driver.c: move the qemudExtractVersionInfo() call from
qemudDomainChangeEjectableMedia() to qemudDomainAttachDevice()
Currently, an interface's vlan number corresponds to its index in
the table of network interfaces. That is no longer true when we
allow devices to be removed.
To fix this, we store the vlan number in the domain's state XML
so that it survives libvirtd restarts.
* src/domain_conf.h: add vlan number to virDomainNetDef
* src/domain_conf.c: store it in XML as <state vlan='N'/>, defaulting
to -1 if this is state saved by a previous version of libvirt
* src/qemu_conf.c: assign vlan numbers before starting qemu
The qemu driver needs to assign and keep track of identifiers for
network devices so that it can remove them. We need to keep this state
across libvirtd restarts, but it's not configuration that needs to
be kept across guest restarts.
* src/domain_conf.c: parse and format <state nic="foo" hostnet="bar"/>
We need these so that we can remove the devices via the monitor.
* src/domain_conf.h: add nic_name and hostnet_name to virDomainNetDef
* src/domain_conf.c: free nic_name and hostnet_name
* src/qemu_conf.c: add qemuAssignNetNames(), use it if qemu has
support for the param and pass the names on the command line
* tests/qemuxml2argv*: add a test for this
Add QEMUD_CMD_FLAG_NET_NAME to indicate that '-net ...,name=foo' is
supported and QEMUD_CMD_FLAG_HOST_NET_ADD to indicate that the
'host_net_add' monitor command is available.
Set both these flags if the qemu version is greater than 0.10.0.
Checking via the '-help' output would not work for the monitor command
and even for the command line arg, it would be quite fragile.
* src/qemu_conf.h: add new flags as aliases of QEMUD_CMD_FLAG_0_10
* src/qemu_conf.c: set QEMUD_CMD_FLAG_0_10 for versions >= 0.10.0
* tests/qemuhelptest.c: set QEMUD_CMD_FLAG_0_10 for the appropriate
qemu versions
Re-factor this code so that it can be used for NIC hotplug
too. The awkward prefix and type_sep arguments are needed to
allow us to do "host_net_add tap vlan=..."
* src/qemu_conf.c: factor the net backend string formatting
code into its own function
Re-factor this code so that it can be used for NIC hotplug
too. The awkward arguments are needed to allow use to do
"pci_add auto nic macaddr=..."
* src/qemu_conf.c: factor the nic string formatting code into
its own function
When we hot-plug a disk device into a qemu guest, we need to retain its
PCI address so that it can be removed again later. Currently, we do
retain the slot number, but not across libvirtd restarts.
Add <state devaddr="xxxx:xx:xx"/> to the disk device XML config when the
VIR_DOMAIN_XML_INTERNAL_STATUS flag is used. We still don't parse the
domain and bus number, but the format allows us to do that in future.
* src/domain_conf.h: replace slotnum with pci_addr struct, add helper
for testing whether the address is valid
* src/domain_conf.c: handle formatting and parsing the address
* src/qemu_driver.c: store the parsed slot number as a full PCI address,
and use this address with the pci_del monitor command
* src/vbox/vbox_tmpl.c: we're debug printing slotnum here even though
it can never be set, just delete it
We need to store things like device names and PCI slot numbers in the
qemu domain state file so that we don't lose that information on
libvirtd restart. Add a flag to indicate that this information should
be parsed or formatted.
Make bit 16 and above of the flags bitmask for internal use only and
consume the first bit for this new status flag.
* include/libvirt/libvirt.h: add VIR_DOMAIN_XML_FLAGS_MASK
* src/libvirt.c: reject private flags in virDomainGetXMLDesc()
* src/domain_conf.h: add VIR_DOMAIN_XML_INTERNAL_STATUS
* src/domain_conf.c: pass the flag from virDomainObjParseXML() and
virDomainSaveStatus
* src/libvirt.c: activate the interface drivers
* po/POTFILES.in: add the netcf driver as a source of localization strings
* src/interface_driver.c: NETCF_ENOMEM -> VIR_ERR_NO_MEMORY mapping was
breaking syntax checking
* src/interface_driver.c src/interface_driver.h: the new driver
* src/Makefile.am qemud/Makefile.am qemud/qemud.c: hook the new driver
in the build system and get ti activated by the daemon
* src/libvirt_private.syms: export needed symbols internally
MAC address of a particular interface may change over time, and the
reduced virInterface object (which contains just name and mac) needs
to reflect these changes. Since we can't modify the mac address of an
existing virInterface (some other thread may currently be using it) we
just create a new virInterface, and let the old one die a dignified
death when its refct goes to 0.
* src/datatypes.c: fix the matching and lifetime of virInterface object
accordingly
* include/libvirt/virterror.h src/virterror.c: if a driver's
virInterfaceLookupByMACString() function finds more than one interface
with the desired MAC Address, this new error is raised.
* src/virsh.c: add a number of interface related commands:
iface-list, iface-name, iface-mac, iface-dumpxml, iface-define,
iface-undefine, iface-edit, iface-start and iface-destroy
Unlike the pty monitor (which we know exists since we scrape its path from
stdout), we have no way of knowing that the unix monitor socket should exist/
be initialized. As a result, some of my KVM guests randomly fail to start on
F10 host.
Try to open the unix socket in a 3 second timeout loop. Ignore EACCES (path
does not exist if a first time run) and ECONNREFUSED (leftover socket from
a previous run hasn't been removed yet). Fixes things for me.
Have storage building functions be definitions of
virStorageBackendBuildVolFrom: we will need to do this in the future anyways
if we ever support the flags attribute.
Break out separate functions for
- Determining the supported '*-img' tool,
- The tool's associated create function,
- Desired function for cloning (CreateXMLFrom).
This will be eventually used to unify cloning across all backends.
Currently, if no format is specified for a new disk volume, we pass the
invalid value "none" as the FS type to 'parted mkpart'.
There doesn't seem to be a way to have parted not format the drive, so
just default to using 'ext2' in this case: this shouldn't cause any harm,
since we are creating a new partition in the first place.
* configure.in: Add --with-qemu-user and --with-qemu-group args
* libvirt.spec.in: use 'qemu' for user/group for Fedora >= 12
* qemud/libvirtd_qemu.arg, qemud/test_libvirtd_qemu.aug,
src/qemu.conf: Add 'user' and 'group' args for configuration
* src/Makefile.am: Create %localstatedir/cache/libvirt/qemu
* src/qemu_conf.c, src/qemu_conf.h: Load user/group from config
* src/qemu_driver.c: Change user ID/group ID when launching QEMU
guests. Change user/group ownership on disks/usb/pci devs.
Put memory dumps in %localstatedir/cache/libvirt/qemu
* src/util.c, src/util.h: Add convenient APIs for converting
username/groupname to user ID / group ID
* src/driver.h: add new driver functions virDrvNumOfDefinedInterfaces
and virDrvListDefinedInterfaces
* src/libvirt.c: implements the entry points, calling new driver
functions
* qemud/remote.c qemud/remote_dispatch_args.h qemud/remote_protocol.[chx]
qemud/remote_dispatch_prototypes.h qemud/remote_dispatch_ret.h
qemud/remote_dispatch_table.h src/remote_internal.c: implement the
client/server side of the RPC
* include/libvirt/libvirt.h[.in]: adds signatures for the new exported
functions virConnectNumOfDefinedInterfaces and
virConnectListDefinedInterfaces
* src/libvirt_public.syms: export the new symbols
Remove redundant error reporting functions which obscured the
filename/line number reporting. Removed code which created a
virDomain/virNetwork object, since those are silently dropped
in error reporting functions now
* src/remote_internal.c: Remove error() and errorf() in favour of
macros, and remove server_error in favour of direct call
Splits up the 'call' method moving generic IO code out into
separate method to allow it to be easily reused for sending
data streams
* src/remote_internal.c: Split 'call' into two methods, the first
with same name serializes a set of method arguments into a
message, the second 'remoteIO' takes a pre-serialized messages,
sends it and awaits a reply
* src/remote_internal.c: Rename processCallRecvMsg to
processCallDispatch, and move code specific to method replies
into processCallDispatchReply, and rename processCallAsyncEvent
to processCallDispatchMessage
The 'remote_message_header' struct has a mis-leadingly named
field 'direction'. It is really a reflection of the type of
message, and some types can be sent in either direction. Thus
the field is more accurately named 'type'. No function change.
* qemud/remote_protocol.x: Rename 'direction' to 'type' in
'remote_message_header. Write better docs describing the
message header field semantics & usage
* qemud/remote_protocol.c, qemud/remote_protocol.h: Regenerate
* qemud/remote.c, qemud/dispatch.c, src/remote_internal.c
Update to reflect rename of 'direction' to 'type'
The naming convention for structs used in the RPC layer is for
incoming requests to be called XXXX_args, and the associated
outgoing reply to be called XXXX_ret. Asynchronously emitted
messages (eg events) are re-using the XXXX_ret naming scheme.
This patch changes that such that async messages are XXXX_msg,
and stops adding entries for them in the dispatch table, avoiding
the need for a dummy no-op implementation.
* qemud/remote.c: Remove dummy remoteDispatchDomainEvent, no
longer required. Update to replace remote_domain_event_ret
with xdr_remote_domain_event_msg
* qemud/remote_protocol.x: Rename remote_domain_event_ret to
remote_domain_event_msg
* qemud/remote_generate_stubs.pl: Adding handling for new
XXX_msg structs.
* src/remote_internal.c: Rename remote_domain_event_ret to
remote_domain_event_msg
* qemud/remote_dispatch_prototypes.h, qemud/remote_dispatch_ret.h,
qemud/remote_dispatch_table.h, qemud/remote_protocol.h,
qemud/remote_protocol.c: auto-regenerate
* src/virsh.c: adds cd and pwd commands to virsh useful for save and
restore commands
* docs/virsh.pod virsh.1: update the documentation
* AUTHORS: add Paolo Bonzini
by running this command:
git ls-files -z | xargs -0 perl -pi -0777 -e 's/\n\n+$/\n/'
This is in preparation for a more strict make syntax-check
rule that will detect trailing blank lines.
* src/remote_internal.c: Disable libvirtd autostart if the
LIBVIRT_AUTOSTART=0 env variable is set
* src/libvirt.c: Document environment variables can impact
the virConnectOpen API
* src/interface_conf.c src/interface_conf.h: the import and export
routines and the internal APIs
* src/Makefile.am: hook the new file in the makefiles
* src/libvirt_private.syms: export a few private symbols internally
* po/POTFILES.in: the new file contains translatable strings
* qemud/remote.c: Send back the actual libvirt connection error
rather than formatting a generic error for security driver
methods
* src/libvirt.c: Fix virDomainGetSecurityLabel, and
virNodeGetSecurityModel to correctly set the error on
the virConnectPtr object, and raise a full error rather
than warning when not supported
The 'pipe' character type wasn't documented.
TCP uses a <protocol> element, not <wire>
We weren't doing strict validation for protocol and source mode values.
* src/domain_conf.c: replace open coded chr type parsing with
virDomainChrTypeFromString(), retaining the existing semantics
where unknown types are silently mapped to the "null" type and
"pty" is used if none is specified
We keep support for the pty based monitor so that we can re-connect
to VMs started by older versions of libvirtd.
* src/domain_conf.c: handle formatting and parsing unix monitors
* src/qemu_driver.c: add qemudOpenMonitorUnix(), remove the monitor
pty path searching from qemudFindCharDevicePTYs(), switch
qemudStartVMDaemon() and qemuDomainXMLToNative() to using a unix
monitor
* tests/qemuxml2argvtest.c: switch to using a unix monitor
* tests/qemuxml2argvdata/qemuxml2argv-*.args: update test data
There are no functional changes in this patch apart from adding the
monitor type to the state XML.
The patch mostly consists of switching to use virDomainChrDef every
where to describe the monitor.
* src/domain_conf.h: replace monitorpath with monitor_chr
* src/domain_conf.c: handle parsing the monitor type and initializing
monitor chr
* src/qemu_conf.[ch]: make qemudBuildCommandLine take a
virDomainChrDefPtr and use that to build the -monitor parameter
* src/qemu_driver.c: split pty specific and common code from
qemudOpenMonitor, have qemudStartVMDaemon() initialize monitor_chr
* tests/qemuxml2argvtest.c: update for qemudBuildCommandLine() change
* src/qemu_driver.c: vm->monitorpath is already initialized in the case
of re-connect, so move the initialization for the normal startup case
out of the common code
* src/qemu_conf.c, src/qemu_conf.h: Use -vga or -std-vga
when starting guests if video card is present
* tests/qemuhelptest.c: Change to use constants instead
of hardcoded hex numbers, and add VGA support
* tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml,
tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml: Add <video>
element for testing graphics adapter
* tests/qemuxml2argvtest.c: Add QEMUD_CMD_FLAG_VGA flag
* tests/qemuxml2xmltest.c: Add missing graphics-vnc-sasl/tls tests
* docs/schemas/domain.rng: Define <video> element schema
* src/domain_conf.c, src/domain_conf.h, src/libvirt_private.syms:
Add parsing and formatting for <video> element
* src/network_driver.c src/node_device.c src/storage_driver.c:
many places in the code reported 'No xxx with matching name" after
a Lookup error without reporting the name used by the failed lookup
Fixes startup of guest's with sourceless cdrom devices.
Patch from Cole Robinson originally posted here:
https://bugzilla.redhat.com/499569
but never sent upstream.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
As pointed out by Tim Waugh here:
https://bugzilla.redhat.com/507555
We shouldn't bother trying to set the context of a file if it already
matches what we want.
(Fixed to use STREQ() and not use tabs, as pointed out by danpb)
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
This patch was posted ages ago here:
https://bugzilla.redhat.com/493692
But was never posted upstream AFAICT.
Patch from Dan Berrange
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
* docs/schemas/network.rng: fix the network schemas to match
new accepted elements, patch by Satoru SATOH
* src/network_conf.c: fix network driver to save the domain name
in XML if present, patch by Satoru SATOH
* AUTHORS: adding Satoru SATOH
Daniel
* src/libvirt.c src/virterror.c: fix some missing comments in public
modules.
* docs/libvirt-api.xml docs/libvirt-refs.xml
docs/devhelp/libvirt-libvirt.html docs/html/libvirt-libvirt.html:
regenerated documentation
* po/*: updated the polish localization and regenerated
Daniel
* docs/logging.html[.in] qemud/libvirtd.conf qemud/qemud.c
src/logging.[ch]: cleanup the logging code and docs to remove
all references to log level 0, cleanup hardcoded values and add
a default VIR_LOG_DEFAULT value, patch by Amy Griffis
daniel
* src/libvirt_private.syms src/parthelper.c src/storage_backend_disk.c
src/storage_conf.c src/storage_conf.h: allow to create storage
volumes on disk backend, patches by Henrik Persson
* AUTHORS: add Henrik Persson
Daniel
* src/Makefile.am src/libvirt.c src/libvirt_private.syms src/logging.c
src/logging.h src/util.c src/libvirt_debug.syms: big cleanup of
the debug configuration option and code by Amy Griffis
daniel
* src/qemu_driver.c: fix a domain state problem after
migration, patch by Federico Simoncelli, fixes#507537
* src/domain_conf.c: fix a transcient domain state problem after
destroy, patch by Federico Simoncelli, fixes#507304
* AUTHORS: add Federico Simoncelli and Javier Fontan
daniel
* configure.in libvirt.spec.in src/Makefile.am
src/opennebula/one_client.[ch] src/opennebula/one_conf.h
src/opennebula/one_driver.[ch] : Finish the integration of OpenNebula,
avoid dependancy on OpenNebula libraries, require xmlrpc-c-devel
and build it by default, based on patch by Javier Fontan and DanB
suggestions
Daniel
If using a custom test driver, storage pool file parsing was broken, and
storage volume parsing was never implemented. Fix these issues, and add
some examples in docs/
The storage driver arranges its parsing routines in a way that make them
difficult to use in the test driver for non-default file parsing. This
refactoring moves things to be consistent with the way domain_conf and
network_conf do things.
If specifying a custom test driver, virtual networks were not 'activated'
on driver init. This differs from the behavior of domains and storage pools,
so fix it. Also improve a couple error messages in that area.
virEnumFromString doesn't check for a NULL string, and will segfault if
passed one. Lots of calling code protects against this, but at least
/pool/@type parsing does not.
CreateXMLFrom changes accidentally caused all raw volume creation to be
fully allocated (as though allocation == capacity). Fix this.
Also force CreateXMLFrom to maintain the previous behavior: sparseness
should still be maintained since we search for holes when copying, and the
clone behavior hasn't been tested with anything but the broken behavior.
Rather than numerous instances of:
emulator = vm->def->emulator;
if (!emulator)
emulator = virDomainDefDefaultEmulator(conn, vm->def, driver->caps);
if (!emulator)
return -1;
Set this value at XML parse time in the domain config, so we can depend on
it for all future emulator accesses. There were unchecked accesses in the
qemu driver that were tripping up on this if no emulator was specified in
the XML, see:
http://www.redhat.com/archives/libvir-list/2008-October/msg00602.html
Certain drivers always need an 'emulator' specified in the XML (qemu and lxc
at least). Store this info in capabilities.
We will eventually use this to move default emulator handling out of
drivers and into domain_conf.*
* src/node_device_hal.c src/node_device_conf.[ch]: add support
for serial number in HAL storage backend, patch by Dave Allan
* docs/schemas/nodedev.rng
tests/nodedevschemadata/storage_serial_3600c0ff000d7a2a5d463ff4902000000.xml:
update the schemas and add a test case, also by Dave Allan
Daniel
The KVM version string can be one of the following:
- qemu-kvm-x.y.z in stable releases
- kvm-XX for kvm versions up to kvm-85
- qemu-kvm-devel-XX for kvm version kvm-86 and later
There are only a few of places where we need to detect
differences between KVM versions based on 0.9.1:
1) VNET_HDR introduced in kvm-74
2) -incoming tcp introduced in kvm-79
3) -incoming exec introduced in kvm-80
4) -incoming stdio in all earlier kvm versions
With qemu-kvm-0.10.x, we can now assume that (1) is available
if it's a KVM release, (2) and (3) is always available and
(4) is never available.
So, from now on we should only need to check the qemu version
number and the "is_kvm" flag for detecting feature availability.
We only need the KVM version number for older releases.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
This patch is purely re-factoring without any functional changes
to make way for the next patch.
The main thing achieved by the refactoring is that we now have
easier access to the parenthesised string that KVM folks seem
to delight in changing.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
* configure.in src/libvirt_private.syms src/storage_backend_fs.c
src/util.c src/util.h: find and use kvm-img, qemu-img or qcow-create
dynamically at runtime, patch by Doug Goldstein
* AUTHORS: add Doug Goldstein
Daniel
* src/Makefile.am src/node_device.[ch] src/node_device_conf.[ch]
src/node_device_hal.[ch] src/node_device_hal_linux.c
src/qemu_driver.c src/remote_internal.c src/storage_backend.c
src/virsh.c src/xen_unified.c tests/nodedevxml2xmltest.c
po/POTFILES.in: implementation for node device create and destroy
in NPIV support, patch by David Allan
Daniel
If two virtual networks have the same hardcoded bridge device (which
prevents them from being active simultaneously) we still want to define
them at daemon startup, so the user has a fighting chance of correcting
the XML error.
Add an extra flag to SetBridge to avoid reporting an error if there is
a bridge collision, and use this when loading network configs at startup.
This regressed via commit 4c3f3b4d.
Parse the command line output a bit earlier so we have a better chance
of reporting the full error output on failure.
I hit this when QEMU would try to boot an invalid kernel (virtinst bug).
There is different spacing when listing active vs. inactive networks. Ex:
Name State Autostart
-----------------------------------------
default active yes
xxxxxx inactive no
* src/qemu_conf.c docs/schemas/domain.rng
tests/capabilityschemadata/caps-qemu-kvm.xml: PPC Qemu Machine Type
changed from g3bw to g3beige some time ago, patch by Thomas Baker
Daniel
* src/opennebula/one_conf.[ch] src/opennebula/one_driver.[ch]:
the OpenNebula driver
* configure.in include/libvirt/virterror.h qemud/Makefile.am
qemud/qemud.c src/Makefile.am src/domain_conf.[ch] src/driver.h
src/libvirt.c src/virterror.c: integration of the OpenNebula
driver in the libvirt infrastructure
* AUTHORS: add Abel Miguez Rodriguez
daniel
* qemud/qemud.c src/console.c src/network_driver.c
src/node_device_conf.c src/node_device_hal.c src/storage_conf.c
src/util.c: cleanup of some direct stderr logging
daniel
There is some funkiness here, since we are either dealing with 2 different
pools (which means validation x 2) or the same pool, where we have to be
careful not to deadlock.
The cap_lost and prop_modified callbacks could deadlock if an existing
device needed to be refreshed, since dev_create expects the driver to
be unlocked.
* docs/schemas/domain.rng src/domain_conf.[ch] src/qemu_driver.c:
extend the generic code for the RDP and desktop extensions of
the graphic tag needed for vbox, patch by Pritesh Kothari
Daniel
Improves readability, particularly wrt the pending CreateFromXML changes.
This will also help implementing File->Block volume creation in the future,
since some of this code will need to be moved to a backend agnostic file.
vol-clone is a convenience function, requiring only a volume to clone and a
new name.
vol-create-from is a direct mapping to the public API, which allows cloning
across pools, converting between formats, etc, but requires an xml file to be
passed
By checking the pid every retry period, we can quickly determine if
the process crashed at startup, rather than make the user wait for
the entire timeout (3 seconds).
virExec will write out the pid of the daemonized process only. Use this
in the QEMU driver, rather than QEMU's pidfile, so we can catch errors we
might miss if the emulator bails early.
Wraps __virExec with the VIR_EXEC_DAEMON flag. Waits on the intermediate
process to ensure we don't end up with any zombies, and differentiates between
original process errors and intermediate process errors.
* src/domain_conf.[ch] docs/schemas/domain.rng: add support
for internal network in the generic part of the code, and
update the Relax-NG grammar accordingly, patch by Pritesh Kothari
daniel
* src/domain_conf.c src/domain_conf.h: parse and save multiple
graphics elements instead of one, patch by Pritesh Kothari
* src/qemu_conf.c src/qemu_driver.c: adapt the qemu/kvm driver for
the new structures, patch by Pritesh Kothari
* src/xend_internal.c src/xm_internal.c: same thing for Xen drivers
Daniel
This change:
Tue Mar 3 08:55:13 GMT 2009 Daniel P. Berrange <berrange@redhat.com>
Don't try to detach & reset PCI devices while running test
suite for XML-> ARGV conversion.
* src/qemu_driver.c: Add qemuPrepareHostDevices() helper to
detach and reset PCI devices.
* src/qemu_conf.c: Don't detach & reset PCI devices while
building the command line argv
accidentally did this:
- if (hostdev->managed) {
+ if (!hostdev->managed) {
Which results in managed='yes' not causing the device to be
detached when the guest is starting.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
* src/vbox/vbox_driver.c src/vbox/vbox_tmpl.c: changes in
VirtualBox driver version detection and move informations
from a global variable into a driver structure, patch by Pritesh
Kothari.
Daniel
