When cpu hotplug fails without reporting an error, we would fail the
command but update the count of vCPUs anyways.
Commit 761fc48136 fixed the case when CPU
hot-unplug failed silently, but forgot to fix up the value in this case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1000357
The virDomainOpenGraphics method accepts a UNIX socket FD from
the client app. It must set the label on this FD otherwise QEMU
will be prevented from receiving it with recvmsg.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If user requested multiqueue networking, beside multiple /dev/tap and
/dev/vhost-net openings, we forgot to pass mq=on onto the -device
virtio-net-pci command line. This is advised at:
http://www.linux-kvm.org/page/Multiqueue#Enable_MQ_feature
Re-arrange the code so that the returned bitmap is always initialized to
NULL even on early failures and return an error message as some callers
are already expecting it. Fix up the rest not to shadow the error.
Previously the error message showed the following:
error: internal error: Invalid or not yet handled value 'auto detect'
for VMX entry 'ide0:0.fileName'
This left the user unsure if it was a CD-ROM or a disk device that they
needed to fix. Now the error shows:
error: internal error: Invalid or not yet handled value 'auto detect'
for VMX entry 'ide0:0.fileName' for device type 'cdrom-raw'
Which should hopefully make it easier to see the issue with the VMX
configuration.
More fallout from commit d72ef888. When reconnecting to running
domains, the libxl_ctx in libxlDomainObjPrivate was used before
initializing it, causing a segfault in libxl and consequently
crashing libvirtd.
Initialize the libxlDomainObjPrivate libxl_ctx in libxlReconnectDomain,
and while at it use this ctx in libxlReconnectDomain instead of the
driver-wide ctx.
https://bugzilla.redhat.com/show_bug.cgi?id=822052
When doing a live migration, if the destination fails for any
reason after the point in which files should be labeled, then
the cleanup of the destination would restore the labels to their
defaults, even though the source is still trying to continue
running with the image open. Bug 822052 mentioned one source
of live migration failure - a mismatch in SELinux virt_use_nfs
settings (on for source, off for destination); but I found other
situations that would also trigger it (for example, having a
graphics device tied to port 5999 on the source, and a different
domain on the destination already using that port, so that the
destination cannot reuse the port).
In short, just as cleanup of the source on a successful migration
must not relabel files (because the destination would be crippled
by the relabel), cleanup of the destination on a failed migration
must not relabel files (because the source would be crippled).
* src/qemu/qemu_process.c (qemuProcessStart): Set flag to avoid
label restoration when cleaning up on failed migration.
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduced by commit e0139e3044. virStorageVolDefFree free'ed the
pointers that are still used by the added volume object, this changes
it back to VIR_FREE.
Each of the modules handled reporting error messages from the secret fetching
slightly differently with respect to the error. Provide a similar message
for each error case and provide as much data as possible.
Following XML would fail :
<disk type='network' device='lun'>
<driver name='qemu' type='raw'/>
<source protocol='iscsi' name='iqn.2013-07.com.example:iscsi/1'>
<host name='example.com' port='3260'/>
</source>
<target dev='sda' bus='scsi'/>
</disk>
With the message:
error: Failed to start domain iscsilun
error: Unable to get device ID 'iqn.2013-07.com.example:iscsi/1': No such fi
Cause was commit id '1f49b05a' which added 'virDomainDiskSourceIsBlockType'
If we reached cleanup: prior to allocating cpus, it was possible that
'nr_nodes' had a value, but cpus was NULL leading to a possible NULL
deref. Add a 'cpus' as an end condition to for loop
https://bugzilla.redhat.com/show_bug.cgi?id=924153
Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with
an attribute relabel='no' in order to try and minimize the
impact of shutdown delays when an NFS server disappears. The idea
was that if a disk is on NFS and can't be labeled in the first
place, there is no need to attempt the (no-op) relabel on domain
shutdown. Unfortunately, the way this was implemented was by
modifying the domain XML so that the optimization would survive
libvirtd restart, but in a way that is indistinguishable from an
explicit user setting. Furthermore, once the setting is turned
on, libvirt avoids attempts at labeling, even for operations like
snapshot or blockcopy where the chain is being extended or pivoted
onto non-NFS, where SELinux labeling is once again possible. As
a result, it was impossible to do a blockcopy to pivot from an
NFS image file onto a local file.
The solution is to separate the semantics of a chain that must
not be labeled (which the user can set even on persistent domains)
vs. the optimization of not attempting a relabel on cleanup (a
live-only annotation), and using only the user's explicit notation
rather than the optimization as the decision on whether to skip
a label attempt in the first place. When upgrading an older
libvirtd to a newer, an NFS volume will still attempt the relabel;
but as the avoidance of a relabel was only an optimization, this
shouldn't cause any problems.
In the ideal future, libvirt will eventually have XML describing
EVERY file in the backing chain, with each file having a separate
<seclabel> element. At that point, libvirt will be able to track
more closely which files need a relabel attempt at shutdown. But
until we reach that point, the single <seclabel> for the entire
<disk> chain is treated as a hint - when a chain has only one
file, then we know it is accurate; but if the chain has more than
one file, we have to attempt relabel in spite of the attribute,
in case part of the chain is local and SELinux mattered for that
portion of the chain.
* src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new
member.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML):
Parse it, for live images only.
(virSecurityDeviceLabelDefFormat): Output it.
(virDomainDiskDefParseXML, virDomainChrSourceDefParseXML)
(virDomainDiskSourceDefFormat, virDomainChrDefFormat)
(virDomainDiskDefFormat): Pass flags on through.
* src/security/security_selinux.c
(virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip
when possible.
(virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not
norelabel, if labeling fails.
(virSecuritySELinuxSetFileconHelper): Fix indentation.
* docs/formatdomain.html.in (seclabel): Document new xml.
* docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml:
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args:
* tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml:
New test files.
* tests/qemuxml2argvtest.c (mymain): Run the new tests.
* tests/qemuxml2xmltest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
If there's no hard_limit set and domain uses VFIO we still must lock the
guest memory (prerequisite from qemu). Hence, we should compute the
amount to be locked from max_balloon.
Since 16bcb3 we have a regression. The hard_limit is set
unconditionally. By default the limit is zero. Hence, if user hasn't
configured any, we set the zero in cgroup subsystem making the kernel
kill the corresponding qemu process immediately. The proper fix is to
set hard_limit iff user has configured any.
From: Dario Faggioli <dario.faggioli@citrix.com>
Starting from Xen 4.2, libxl has all the bits and pieces in place
for retrieving an adequate amount of information about the host
NUMA topology. It is therefore possible, after a bit of shuffling,
to arrange those information in the way libvirt wants to present
them to the outside world.
Therefore, with this patch, the <topology> section of the host
capabilities is properly populated, when running on Xen, so that
we can figure out whether or not we're running on a NUMA host,
and what its characteristics are.
[raistlin@Zhaman ~]$ sudo virsh --connect xen:/// capabilities
<capabilities>
<host>
<cpu>
....
<topology>
<cells num='2'>
<cell id='0'>
<memory unit='KiB'>6291456</memory>
<cpus num='8'>
<cpu id='0' socket_id='1' core_id='0' siblings='0-1'/>
<cpu id='1' socket_id='1' core_id='0' siblings='0-1'/>
<cpu id='2' socket_id='1' core_id='1' siblings='2-3'/>
<cpu id='3' socket_id='1' core_id='1' siblings='2-3'/>
<cpu id='4' socket_id='1' core_id='9' siblings='4-5'/>
<cpu id='5' socket_id='1' core_id='9' siblings='4-5'/>
<cpu id='6' socket_id='1' core_id='10' siblings='6-7'/>
<cpu id='7' socket_id='1' core_id='10' siblings='6-7'/>
</cpus>
</cell>
<cell id='1'>
<memory unit='KiB'>6881280</memory>
<cpus num='8'>
<cpu id='8' socket_id='0' core_id='0' siblings='8-9'/>
<cpu id='9' socket_id='0' core_id='0' siblings='8-9'/>
<cpu id='10' socket_id='0' core_id='1' siblings='10-11'/>
<cpu id='11' socket_id='0' core_id='1' siblings='10-11'/>
<cpu id='12' socket_id='0' core_id='9' siblings='12-13'/>
<cpu id='13' socket_id='0' core_id='9' siblings='12-13'/>
<cpu id='14' socket_id='0' core_id='10' siblings='14-15'/>
<cpu id='15' socket_id='0' core_id='10' siblings='14-15'/>
</cpus>
</cell>
</cells>
</topology>
</host>
....
When the daemon is compiled with firewalld support but the DBus message
bus isn't started in the system, the initialization of the nwfilter
driver fails even if there are fallback options.
On hosts that don't have the DBus service running or installed the new
systemd cgroups code failed with hard error instead of falling back to
"manual" cgroup creation.
Use the new helper to check for the system bus and use the fallback code
in case it isn't available.
Some systems may not use DBus in their system. Add a method to check if
the system bus is available that doesn't print error messages so that
code can later check for this condition and use an alternative approach.
Each new VM requires a new connection from libvirtd to virtlockd.
The default max clients limit in virtlockd of 20 is thus woefully
insufficient. virtlockd sockets are only accessible to matching
users, so there is no security need for such a tight limit. Make
it configurable and default to 1024.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This function is to guess the correct limit for maximal memory
usage by qemu for given domain. This can never be guessed
correctly, not to mention all the pains and sleepless nights this
code has caused. Once somebody discovers algorithm to solve the
Halting Problem, we can compute the limit algorithmically. But
till then, this code should never see the light of the release
again.
One has to refresh the pool to get the correct pool info after
adding/removing/resizing a volume, this updates the pool metadata
(allocation, available) after those operation are done.
The function that parses custom driver XML was getting pretty unruly,
split the object parsing into their own functions. Rename some variables
to be consistent across each function. This should be functionally
identical.
Currently the virConnectBaselineCPU API does not expose the CPU features
that are part of the CPU's model. This patch adds a new flag,
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES, that causes the API to explicitly
list all features that are part of that model.
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Cleanup the libxl capabilities code to be a bit more extensible,
splitting out the creation of host and guest capabilities. This
should make it easier to implement additional capabilities in the
future, such as NUMA topology reporting.
The virBitmapParse function was calling virBitmapIsSet() function that
requires the caller to check the bounds of the bitmap without checking
them. This resulted into crashes when parsing a bitmap string that was
exceeding the bounds used as argument.
This patch refactors the function to use virBitmapSetBit without
checking if the bit is set (this function does the checks internally)
and then counts the bits in the bitmap afterwards (instead of keeping
track while parsing the string).
This patch also changes the "parse_error" label to a more common
"error".
The refactor should also get rid of the need to call sa_assert on the
returned variable as the callpath should allow coverity to infer the
possible return values.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=997367
Thanks to Alex Jia for tracking down the issue. This issue is introduced
by commit 0fc8909.
There is a potential leak of a newly created libxlDomainObjPrivate
when subsequent allocation of the object's chrdev field fails.
Unref the object on such an error so that it is properly disposed.
This resolves the issue that prompted the filing of
https://bugzilla.redhat.com/show_bug.cgi?id=928638
(although the request there is for something much larger and more
general than this patch).
commit f3868259ca disabled the
forwarding to upstream DNS servers of unresolved DNS requests for
names that had no domain, but were just simple host names (no "."
character anywhere in the name). While this behavior is frowned upon
by DNS root servers (that's why it was changed in libvirt), it is
convenient in some cases, and since dnsmasq can be configured to allow
it, it must not be strictly forbidden.
This patch restores the old behavior, but since it is usually
undesirable, restoring it requires specification of a new option in
the network config. Adding the attribute "forwardPlainNames='yes'" to
the <dns> elemnt does the trick - when that attribute is added to a
network config, any simple hostnames that can't be resolved by the
network's dnsmasq instance will be forwarded to the DNS servers listed
in the host's /etc/resolv.conf for an attempt at resolution (just as
any FQDN would be forwarded).
When that attribute *isn't* specified, unresolved simple names will
*not* be forwarded to the upstream DNS server - this is the default
behavior.
If booting a container with a root FS that isn't the host's
root, we must ensure that the /dev mount point exists.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virtlockd/libvirtd daemons had listed '?' as the short option
for --help. getopt_long uses '?' for any unknown option. We want
to be able to distinguish unknown options (which use EXIT_FAILURE)
from correct usage of help (which should use EXIT_SUCCESS). Thus
we should use 'h' as a short option for --help. Also add this to
the man page docs
The virtlockd/libvirtd daemons did not list any short option
for the --version arg. Add -V as a valid short option, since
-v is already used for --verbose.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The lxcContainerMountFSBlockAuto method can be used to mount the
initial root filesystem, so it cannot assume a prefix of /.oldroot.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
- Convert virCgroupGet* to VIR_CGROUP_SUPPORTED
- Convert virCgroup(Get|Set)FreezerState to VIR_CGROUP_SUPPORTED
Signed-off-by: Eric Blake <eblake@redhat.com>
