The script was obscuring what's happening and not reporting errors
properly. Remove it since it's no longer used now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The output HTML files (especially those generated from rST files) don't
look good even after reformatting. Skip the extra step and accept that
no matter what we do HTMLs will not look great.
This additionally makes it way simpler to remove meson-html-gen.py in
the future (thus I've neglected to remove passing of xmllint).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Invoke the generator twice and introduce separate
meson targets for headers and C sources.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The first piece of the command we process must be added to the list
straight away regardless of whether it starts with a '-' or not.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There was one attempt a year ago done by me to drop HAL [1] but it was
never resolved. There was another time when Dan suggested to drop HAL
driver [2] but it was decided to keep it around in case device
assignment will be implemented for FreeBSD and the fact that
virt-manager uses node device driver [3].
I checked git history and code and it doesn't look like bhyve supports
device assignment so from that POV it should not block removing HAL.
The argument about virt-manager is not strong as well because libvirt
installed from FreeBSD packages doesn't have HAL support so it will not
affect these users as well [4].
The only users affected by this change would be the ones compiling
libvirt from GIT on FreeBSD.
I looked into alternatives and there is libudev-devd package on FreeBSD
but unfortunately it doesn't work as it doesn't list any devices when
used with libvirt. It provides libudev APIs using devd.
I also looked into devd directly and it provides some APIs but there are
no APIs for device monitoring and events so that would have to be
somehow done by libvirt.
Main motivation for dropping HAL support is to replace libdbus with GLib
dbus implementation and it cannot be done with HAL driver present in
libvirt because HAL APIs heavily depends on symbols provided by libdbus.
[1] <https://www.redhat.com/archives/libvir-list/2019-May/msg00203.html>
[2] <https://www.redhat.com/archives/libvir-list/2016-April/msg00992.html>
[3] <https://www.redhat.com/archives/libvir-list/2016-April/msg00994.html>
[4] <https://svnweb.freebsd.org/ports/head/devel/libvirt/Makefile?view=markup>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the definition of the GuestNicInfo object, with all the required
objects for it.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When a list is freed, we iterate through all the items, invoking the
free function for each; the actual free function called for each element
is the function of the actual type of each element, and thus the @_next
pointer in the element struct has the same type as the element itself.
Currently, the free function gets the parent of the current element
type, and invoke its free function to continue freeing the list.
However, in case the hierarchy of the classes has more than 1 level
(i.e. Class <- SubClass <- SubSubClass), the invoked free function is
only the parent class' one, and not the actual base class of the
hierarchy.
To fix that, change the generator to get the base class of a class, and
invoking that instead. Also, avoid to set the @_next back, as it is not
needed.
Fixes commits 5cff36e39a and
f76c6dde2e.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
stateShutdownPrepare is supposed to inform driver that it will be closed soon
so that the driver can prepare and finish all background threads quickly on
stateShutdownWait call.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For this we need to make the function accessible (at least privately). The
behaviour will change in following patches and the test helps explaining the
change.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that we have moved to Meson, we are no longer required to
use a specific name for this file, and since the rest of our
documentation is in reStructuredText format and uses a matching
file extension, we can give the AUTHORS file the same treatment.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By default, symlink re-creation fails if the link already exists, more
specifically in case of meson-install-symlink.py:
Traceback (most recent call last):
File "/<path_to_libvirt_repo>/scripts/meson-install-symlink.py",
line 15, in <module>
os.symlink(target, link)
FileExistsError: File exists: '../default.xml' -> 'default.xml'
Unfortunately, Python can't mimic "ln -sf", so we have to fix this
differently - remove the existing link first and then try re-creating
it.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We should prevent inlining of symbols from the driver .so files that are
mocked, as well as those in the main libvirt.so
This isn't fixing any currently known problem, just trying to prevent
future issues.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The meson conversion lost the <meta> tags providing the go-import,
because the "$pagename" variable lost the .html suffix. Rather
than fix that, just change to using "$pagesrc" instead, as it is a
better fit.
The 404 page also needs to use absolute links to work correctly for
pages in sub-folders.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
NEWS.rst is based in the root of the repository and 'hvsupport.html'
doesn't have a backing file which can be edited since it's fully
generated. Our 'contribute -> edit this page' link on the bottom of the
page is wrong in those cases.
Fix it by adding the contribute section only when there's a source and
base the 'source' of a html file in the root of the repository.
Along with that we need to modify the scripts/meson-html-gen.py script
to accept optional 'pagesrc' and the XSL template to skip the
'contribute' section when we don't have a source.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to modify check-file-access.py to be usable as wrapper for
libvirt tests. This way we can run the tests using this command:
meson test --setup access
which will run all tests using check-file-access.py as a wrapper.
With autotools all file access are written into single file for all
tests and compared once the whole test suite is done.
With Meson we will compare the file access after every single test
because it is used as wrapper now. That requires writing the file
access into separate files for every single test as they are executed
in parallel.
Since the wrapper is used for all tests in Meson including tests outside
of tests directory we have to check for presence of the output file.
We should also cleanup after ourselves.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Drop automake like print from scripts/hyperv_wmi_generator.py as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Drop automake like print from scripts/esx_vi_generator.py as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
With meson we have to use both env vars and wrapper script to run python
with correct LANG settings.
run_command() and test() have 'env' attribute so we can use it, but
custom_target() doesn't support that attribute. Environment variables
cannot by configured using 'command' because meson checks if the first
item in the list is executable so we have to use a wrapper.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
The term "permitted list" is a better choice for the filtering
logic applied.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of storing release notes as XML and then converting them
to HTML and ASCII at build time using XSLT and a custom script,
we can use reStructuredText as both the source and ASCII
representation and generate HTML from it using the same tooling
we already use for the rest of the documentation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The ASCII output our scripts produce is already very close to
reStructuredText, and with just a few extra tweaks we can get
almost all of the way there.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We previously adopted a minimization technique for po files which
stripped source locations and non-translated msgids in order to save
space in the git repos and have saner commit diffs.
At this time it is not possible to integrate with weblate while having
non-translated msgids stripped, as it will immediately add them back
again.
By keeping all non-translated msgids, our .po files are about x2 the
size at 37 MB vs the original 18 MB. This is still way better than the
original po/ directory which was 109 MB. We're saving 38 MB by still
omitting source file locations, and another 34 MB are saved by the
dropping of all languages which are 100% untranslated.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With newer pycodestyle 2.6.0 (which is part of flake8-3.8.2) reports
the following pep violation during syntax-check:
../scripts/check-remote-protocol.py:95:9: E741 ambiguous variable name 'l'
for l in err.strip().split("\n")
On all the distros we test on, this hasn't occurred yet, but with the
future update of flake8 it likely would. The fix is easy, just name the
variable appropriately.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently the value for an enum is only emitted if it is a plain
string. If the enum is an integer or hex value, or a complex code block,
it is omitted from the API build. This fixes that by emitting the raw
value if no string value is present.
With this change:
<macro name='LIBVIR_CHECK_VERSION'
file='libvirt-common'
params='major,minor,micro'>
<macro name='LIBVIR_VERSION_NUMBER'
file='libvirt-common'>
<macro name='VIR_COPY_CPUMAP'
file='libvirt-domain'
params='cpumaps,maplen,vcpu,cpumap'>
...snip...
<macro name='LIBVIR_CHECK_VERSION'
file='libvirt-common'
params='major,minor,micro'
raw='((major) * 1000000 + (minor) * 1000 + (micro) <= LIBVIR_VERSION_NUMBER)'>
<macro name='LIBVIR_VERSION_NUMBER'
file='libvirt-common'
raw='6004000'>
<macro name='VIR_COPY_CPUMAP'
file='libvirt-domain'
params='cpumaps,maplen,vcpu,cpumap'
raw='memcpy(cpumap, VIR_GET_CPUMAP(cpumaps, maplen, vcpu), maplen)'>
...snip...
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the information about enums in the API document lacks any
mention of parameters, so it is impossible to tell what kind of enum
declaration is present in the libvirt API header. With this change
<macro name='LIBVIR_CHECK_VERSION' file='libvirt-common'>
<macro name='VIR_COPY_CPUMAP' file='libvirt-domain'>
...snip...
becomes
<macro name='LIBVIR_CHECK_VERSION' file='libvirt-common' params='major,minor,micro'>
<macro name='VIR_COPY_CPUMAP' file='libvirt-domain' params='cpumaps,maplen,vcpu,cpumap'>
...snip...
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The API build script tokenizes enums declarations by first splitting on
whitespace. This is unhelpful as it means an enum
# define VIR_USE_CPU(cpumap, cpu) ((cpumap)[(cpu) / 8] |= (1 << ((cpu) % 8)))
Gets tokenized as
#define
VIR_USE_CPU(cpumap,
cpu)
((cpumap)[(cpu)
/
8]
|=
(1
<<
((cpu)
%
8)))
With this change, the set of parameters are all merged into the first
token:
#define
VIR_USE_CPU(cpumap,cpu)
((cpumap)[(cpu)
/
8]
|=
(1
<<
((cpu)
%
8)))
which is more convenient to process later on in the script.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The build system will be running in UTF-8 locale, so any content in the
API XML files will also end up being UTF-8, not ISO-8859-1.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This removes the locally maintained DCO checking script in favour of the
shared container image provided by libvirt-ci.git.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If the DCO check is run on an empty branch (ie one which has no commits
different from master), it throws an error due to trying to interpret
the empty string as a git commit SHA.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This introduces a CI job for validating DCO sign-off in every commit
message. The CI jobs are not provided any information on what the
baseline commit for the branch was. We can't compare against the forked
repo's master branch, as there's no guarantee the user is keeping master
up2date in their fork. Thus we add the master upstream repo as a git
remote and identify the common ancestor.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In v5.0.0-rc1~94 we switched from one huge switch() to an array
for translating error numbers into error messages. However, the
array is declared to have VIR_ERR_NUMBER_LAST items which makes
it impossible to spot this place by compile checking when adding
new error number.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the genaclperms.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the hvsupport.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
The new impl generates byte-for-byte identical output to the
old impl.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the check-file-access.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the group-qemu-caps.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
