There's nothing to clean up in the 'host' local variable on error as
the function which fills it makes sure to fill it only on success. In
such case it's also directly assigned to the array thus the 'host'
variable is cleared.
Remove the 'cleanup' label and 'ret' variable as we can now directly
return -1 on error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the 'inbound'/'outbound' subelements using
virXMLNodeGetSubelement to simplify the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the unnecessary check for valid arguments and use
virXMLPropULongLong instead of hand-written property parsers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We allow (some) domain devices to have a different <seclabel/>
than the top level domain one (this is mostly to allow access to
a resource for multiple domains). Now, we do couple of sanity
checks for such <seclabel/>, e.g. when the <label/> is specified,
but '@relabel' is set to no. But what we are missing is the
opposite: when '@relabel' is set, but no <label/> was provided.
Our schema already denies such combination. Make our parser
behave the same.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2160356
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In virNodeDeviceGetSCSIHostCaps, there is a pattern of reusing
a tmp value and stealing the pointer.
But in two case it is not stolen. Use separate variables for them
to avoid mixing autofree with manual free() calls.
Fixes: 8a0cb5f73ade3900546718eabe70cb064c6bd22c
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Both virtio-mem and virtio-pmem devices have '.memaddr' attribute
which controls the address where they are mapped in the guest
memory. Ideally, users do not need to specify this as QEMU does
the right thing and computes addresses automatically on startup.
But soon, we will need to record this address as it is part of
guest ABI. And also, there might be some users that want to
control this value. Now, we are in a bit of a pickle, because
both these device types already have a PCI address, therefore we
can't just use <address/> blindly. But what we can do, is
introduce <address/> under the <target/> element. This is also
more conceptual, as knobs under <target/> control guest visible
config of memory device (and .memaddr surely falls into that
category).
NB, SgxEPCDeviceInfo struct in QMP definition also has .memaddr
attribute, but because of the way we build cmd line there's no
(easy) way to set the attribute. So ignore that for now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Due to missed break; statement the virDomainInputDefPostParse()
is called not only for VIR_DOMAIN_DEVICE_INPUT but also
VIR_DOMAIN_DEVICE_LEASE and VIR_DOMAIN_DEVICE_NET, which can lead
to all sort of unpredictable results.
Fixes: c4bc4d3b82fbe22e03c986ca896090f481df5c10
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: 720e8f13ff71377580cd37b118cee8a1f982d1d8
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
We already do check that if there's <memory mode='restrictive'/>
then all <memnode/> have to be of 'restrictive' mode too. But
what we are missing the reverse: if there is <memnode/> with
'restrictive' mode, then the <memory/> has to be of the same mode
too.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2208946
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When parsing a <memnode/> we also check whether the @mode
argument fulfills some requirements wrt 'restrictive' mode. This
is not the right place though. There's virDomainNumaDefValidate()
which contains other checks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The virDomainNumatuneNodeSpecified() function does not write into
passed @numatune pointer, it just reads from it. Therefore, the
argument should be const, which allows this function to be called
from places where virDomainNuma is already const (e.g. domain
validation code).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The parser makes the values mandatory and also the qemu code implements
actions for those values. The formatter skips them though. Since
format+parse is used to copy the XML at startup a definition with those
values can't be started.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2203709
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The Memory Tagging Extensions are hardware acceleration present
in some ARM processors that allow memory error detection [1].
Introduce a domain XML knob that turns them on or off.
1: https://www.arm.com/blogs/blueprint/memory-safety-arm-memory-tagging-extension
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
One of our examples in the 'formatbackup.rst' page shows following
config:
<disk name='vda' backup='yes'/>
The schema didn't allow it though. Fix the schema as the internals were
supposed to support it (except for the bug fixed in previous patches).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the 'disk->store' property is already allocated which happens e.g.
when the disk is described by the backup XML but the optional filename
is not filled in 'virDomainBackupDefAssignStore' would not fill in the
default location.
Fix the logic to do it also if a 'virStorageSource' categorizes as
empty.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow users controlling the multi-channel mode by adding a
'multichannel' property parsed for USB audio devices and wire up the
support in the qemu driver.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/472
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently we allow configuring the 'poll-max-ns', 'poll-grow', and
'poll-shrink' parameters of qemu iothreads only during runtime and they
are not persisted. Add XML machinery to persist them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A new enum type "Default" has been added for Input bus.
The logic that handled default input bus types in
virDomainInputParseXML() has been moved to a new function
virDomainInputDefPostParse() in domain_postparse.c
Link to Issue: https://gitlab.com/libvirt/libvirt/-/issues/8
Signed-off-by: K Shiva <shiva_kr@riseup.net>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We exit early if poolOptions->formatToString is false.
Fixes: 9dadc7302920f9fca0057c655d03c2b0206b9a70
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Throughout all of our network driver code we assume that
dnsmasqPid of value -1 means the network has no dnsmasq process
running. There are plenty of calls to:
virNetworkObjSetDnsmasqPid(obj, -1);
or:
pid_t dnsmasqPid = virNetworkObjGetDnsmasqPid(obj);
if (dnsmasqPid > 0) ...;
Now, a virNetworkObj is created via virNetworkObjNew() which
might as well set this de-facto default value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
That's already the case in practice, but it's a better
experience for the user if we reject this configuration
outright instead of silently ignoring part of it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
igb is a new network device which will be introduced with QEMU 8.0.0.
It is a successor of e1000e so it has PCIe interface and is understands
virtio-net headers as e1000e does.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a small kludge in the parser to avoid unnecessarily
blocking incoming migration from a range of recent libvirt
releases.
https://bugzilla.redhat.com/show_bug.cgi?id=2184966
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In an effort to separate the validation steps from the Parse stage,
a few validation checks of virDomainGraphicsListenDef have been moved from
virDomainGraphicsListenDefParseXML() in domain_conf.c to
virDomainGraphicsDefListensValidate() in domain_validate.c
Signed-off-by: K Shiva <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function always returns 0. Remove the return value and refactor
caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify use of the function by determining the number of elements
inside the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's more stuff than device info to clear nowadays. Drop the
misleading comment. Shorten the comment saying that device info is freed
elsewhere when 'parentnet' is present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capabilities generated on OSX hosts with 'hvf' accelerator will not
pass schema testing as the 'hvf' type was not allowed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainHostdevDefClear' must clear the pointers too as it can be
invoked multiple times on the same object e.g. inside
qemuDomainRemoveHostDevice once via virDomainHostdevDefFree which skips
freeing the object if it's used via <interface> and thus has a 'net'
definition corresponding to it, and then subsequently via
virDomainNetDefFree.
Fix it by clearing the pointer along with freeing it.
Fixes: d9e4075d4e9
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2182961
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The reason why it was in postparse in the first place was so
that we could could automatically enable the secure-boot feature
in some cases, but that no longer happens so we can finally move
it to the proper location.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we're adding information obtained from the firmware
descriptor to the domain XML, this will happen automatically
whenever a firmware that has the enrolled-keys feature ends up
being selected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The combination of explicit firmware paths, which we now
produce in all cases, and firmware autoselection knobs is
explicitly rejected by libvirt 8.6.0 and newer.
Right now we produce inherently migratable XML in all cases,
since we always strip those bits, but that's going to change
soon. To prepare for that, make sure that we always skip the
problematic elements and attributes when preparing a
migratable XML.
The destination will simply receive a fully specified firmware
configuration, which is indistinguishable from one that was
manually provided by the user and is thus accepted by any old
version of libvirt, regardless of whether or not firmware
autoselection was used on the source host.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
