We need these so that we can remove the devices via the monitor.
* src/domain_conf.h: add nic_name and hostnet_name to virDomainNetDef
* src/domain_conf.c: free nic_name and hostnet_name
* src/qemu_conf.c: add qemuAssignNetNames(), use it if qemu has
support for the param and pass the names on the command line
* tests/qemuxml2argv*: add a test for this
Add QEMUD_CMD_FLAG_NET_NAME to indicate that '-net ...,name=foo' is
supported and QEMUD_CMD_FLAG_HOST_NET_ADD to indicate that the
'host_net_add' monitor command is available.
Set both these flags if the qemu version is greater than 0.10.0.
Checking via the '-help' output would not work for the monitor command
and even for the command line arg, it would be quite fragile.
* src/qemu_conf.h: add new flags as aliases of QEMUD_CMD_FLAG_0_10
* src/qemu_conf.c: set QEMUD_CMD_FLAG_0_10 for versions >= 0.10.0
* tests/qemuhelptest.c: set QEMUD_CMD_FLAG_0_10 for the appropriate
qemu versions
Re-factor this code so that it can be used for NIC hotplug
too. The awkward prefix and type_sep arguments are needed to
allow us to do "host_net_add tap vlan=..."
* src/qemu_conf.c: factor the net backend string formatting
code into its own function
Re-factor this code so that it can be used for NIC hotplug
too. The awkward arguments are needed to allow use to do
"pci_add auto nic macaddr=..."
* src/qemu_conf.c: factor the nic string formatting code into
its own function
When we hot-plug a disk device into a qemu guest, we need to retain its
PCI address so that it can be removed again later. Currently, we do
retain the slot number, but not across libvirtd restarts.
Add <state devaddr="xxxx:xx:xx"/> to the disk device XML config when the
VIR_DOMAIN_XML_INTERNAL_STATUS flag is used. We still don't parse the
domain and bus number, but the format allows us to do that in future.
* src/domain_conf.h: replace slotnum with pci_addr struct, add helper
for testing whether the address is valid
* src/domain_conf.c: handle formatting and parsing the address
* src/qemu_driver.c: store the parsed slot number as a full PCI address,
and use this address with the pci_del monitor command
* src/vbox/vbox_tmpl.c: we're debug printing slotnum here even though
it can never be set, just delete it
We need to store things like device names and PCI slot numbers in the
qemu domain state file so that we don't lose that information on
libvirtd restart. Add a flag to indicate that this information should
be parsed or formatted.
Make bit 16 and above of the flags bitmask for internal use only and
consume the first bit for this new status flag.
* include/libvirt/libvirt.h: add VIR_DOMAIN_XML_FLAGS_MASK
* src/libvirt.c: reject private flags in virDomainGetXMLDesc()
* src/domain_conf.h: add VIR_DOMAIN_XML_INTERNAL_STATUS
* src/domain_conf.c: pass the flag from virDomainObjParseXML() and
virDomainSaveStatus
* src/libvirt.c: activate the interface drivers
* po/POTFILES.in: add the netcf driver as a source of localization strings
* src/interface_driver.c: NETCF_ENOMEM -> VIR_ERR_NO_MEMORY mapping was
breaking syntax checking
* src/interface_driver.c src/interface_driver.h: the new driver
* src/Makefile.am qemud/Makefile.am qemud/qemud.c: hook the new driver
in the build system and get ti activated by the daemon
* src/libvirt_private.syms: export needed symbols internally
MAC address of a particular interface may change over time, and the
reduced virInterface object (which contains just name and mac) needs
to reflect these changes. Since we can't modify the mac address of an
existing virInterface (some other thread may currently be using it) we
just create a new virInterface, and let the old one die a dignified
death when its refct goes to 0.
* src/datatypes.c: fix the matching and lifetime of virInterface object
accordingly
* include/libvirt/virterror.h src/virterror.c: if a driver's
virInterfaceLookupByMACString() function finds more than one interface
with the desired MAC Address, this new error is raised.
* libvirt.spec.in: make a client rpm with shared libs, client binaries
and resources needed by those, and a small number of fixes and
cleanups in the spec file.
* docs/Makefile.am ($(top_builddir)/NEWS): Adjust rule to filter
out any trailing blank lines when generating this file.
* NEWS: Regenerate, so that it contains entries for 0.6.5.
* src/virsh.c: add a number of interface related commands:
iface-list, iface-name, iface-mac, iface-dumpxml, iface-define,
iface-undefine, iface-edit, iface-start and iface-destroy
Unlike the pty monitor (which we know exists since we scrape its path from
stdout), we have no way of knowing that the unix monitor socket should exist/
be initialized. As a result, some of my KVM guests randomly fail to start on
F10 host.
Try to open the unix socket in a 3 second timeout loop. Ignore EACCES (path
does not exist if a first time run) and ECONNREFUSED (leftover socket from
a previous run hasn't been removed yet). Fixes things for me.
Have storage building functions be definitions of
virStorageBackendBuildVolFrom: we will need to do this in the future anyways
if we ever support the flags attribute.
Break out separate functions for
- Determining the supported '*-img' tool,
- The tool's associated create function,
- Desired function for cloning (CreateXMLFrom).
This will be eventually used to unify cloning across all backends.
Currently, if no format is specified for a new disk volume, we pass the
invalid value "none" as the FS type to 'parted mkpart'.
There doesn't seem to be a way to have parted not format the drive, so
just default to using 'ext2' in this case: this shouldn't cause any harm,
since we are creating a new partition in the first place.
The code in cfg.mk to detect when the git submodule was out of date
worked most of the time, but not when checked out in a certain way.
* cfg.mk: Extract submodule hash from command output and file,
and compare only that, since the format of the full line may vary.
Reported by Mike Burns, with some diagnosis by Daniel P Berrange.
* configure.in: Add --with-qemu-user and --with-qemu-group args
* libvirt.spec.in: use 'qemu' for user/group for Fedora >= 12
* qemud/libvirtd_qemu.arg, qemud/test_libvirtd_qemu.aug,
src/qemu.conf: Add 'user' and 'group' args for configuration
* src/Makefile.am: Create %localstatedir/cache/libvirt/qemu
* src/qemu_conf.c, src/qemu_conf.h: Load user/group from config
* src/qemu_driver.c: Change user ID/group ID when launching QEMU
guests. Change user/group ownership on disks/usb/pci devs.
Put memory dumps in %localstatedir/cache/libvirt/qemu
* src/util.c, src/util.h: Add convenient APIs for converting
username/groupname to user ID / group ID
* src/driver.h: add new driver functions virDrvNumOfDefinedInterfaces
and virDrvListDefinedInterfaces
* src/libvirt.c: implements the entry points, calling new driver
functions
* qemud/remote.c qemud/remote_dispatch_args.h qemud/remote_protocol.[chx]
qemud/remote_dispatch_prototypes.h qemud/remote_dispatch_ret.h
qemud/remote_dispatch_table.h src/remote_internal.c: implement the
client/server side of the RPC
* include/libvirt/libvirt.h[.in]: adds signatures for the new exported
functions virConnectNumOfDefinedInterfaces and
virConnectListDefinedInterfaces
* src/libvirt_public.syms: export the new symbols
Remove redundant error reporting functions which obscured the
filename/line number reporting. Removed code which created a
virDomain/virNetwork object, since those are silently dropped
in error reporting functions now
* src/remote_internal.c: Remove error() and errorf() in favour of
macros, and remove server_error in favour of direct call
Splits up the 'call' method moving generic IO code out into
separate method to allow it to be easily reused for sending
data streams
* src/remote_internal.c: Split 'call' into two methods, the first
with same name serializes a set of method arguments into a
message, the second 'remoteIO' takes a pre-serialized messages,
sends it and awaits a reply
* src/remote_internal.c: Rename processCallRecvMsg to
processCallDispatch, and move code specific to method replies
into processCallDispatchReply, and rename processCallAsyncEvent
to processCallDispatchMessage
The 'remote_message_header' struct has a mis-leadingly named
field 'direction'. It is really a reflection of the type of
message, and some types can be sent in either direction. Thus
the field is more accurately named 'type'. No function change.
* qemud/remote_protocol.x: Rename 'direction' to 'type' in
'remote_message_header. Write better docs describing the
message header field semantics & usage
* qemud/remote_protocol.c, qemud/remote_protocol.h: Regenerate
* qemud/remote.c, qemud/dispatch.c, src/remote_internal.c
Update to reflect rename of 'direction' to 'type'
All incoming messages currently get routed to the generic method
remoteDispatchClientRequest() for processing. To allow incoming
data stream messages to bypass this and be routed to a specific
location, a concept of dispatch filters is introduced.
* qemud/qemud.h: Add a qemud_client_filter struct and a callback
qemud_client_filter_func. Maintain a list of filters on every
struct qemud_client
* qemud/qemud.c: Move remoteDecodeClientMessageHeader() out of
qemudWorker() into qemudDispatchClientRead(). Check registered
message filters in qemudDispatchClientRead() to decide where
to send incoming messages for dispatch.
The remoteDispatchClientRequest() method is currently hardwired to
assume there is only one type of incoming message, a method call.
To allow for alternate types of incoming messags, the code that is
specific to method calls is being split into a separate method
remoteDispatchClientCall
* qemud/dispatch.c: Move method call specific code out into
remoteDispatchClientCall. Add a helper remoteSerializeError
for returning error messages to client
The current qemudRegisterClientEvent() code is used both for
registering the initial socket watch, and updating the already
registered watch. This causes unneccessary complexity in alot
of code which only cares about updating existing watches. The
updating of a watch cannot ever fail, nor is a reference to the
'qemud_server' object required.
This introduces a new qemudUpdateClientEvent() method for that
case, allowing the elimination of unneccessary error checking
and removal of the server back-reference in struct qemud_client.
* qemud/qemud.h: Remove 'server' field from struct qemud_client.
Add qemudUpdateClientEvent() method. Remove 'update' param
from qemudRegisterClientEvent method
* qemud/dispatch.c, qemud/qemud.c, qemud/remote.c: Update alot
of code to use qemudUpdateClientEvent() instead of
qemudRegisterClientEvent(). Move more logic from remoteRelayDomainEvent
into remoteDispatchDomainEventSend.
